Add Info B-65395EN 01 PDF
Add Info B-65395EN 01 PDF
Add Info B-65395EN 01 PDF
Spec. B-65395EN/01
No./Version
2.Summary of Change
Optional
Function
Unit
Maintenance
Parts
Notice
Correction
Another
Draw
No.
B-65395EN/01-1
and No.067 of "B.3 FEEDRATE PARAMETERS" and the parameter No.059 and
NOTE
1 The maximum of the setting range is shown in the following table according
to the setting value of N. When the setting value exceeds this maximum,
the actual feedrate is not correct.
2 When N is equal to or less than 3, the actual feedrate has the error of 7 or 8
in N=3 (75 in N=2, 750 in N=1, 7500 in N=0), and the feedrate may be lower
than the setting value. This is caused by the computation precision. The
smaller the feedrate is given, the bigger the relative error becomes. In this
case, adjust the setting value. For example, when “40” is set in N=3, the
actual feedrate is 37. The actual feedrate is all 37 in the range of setting
value 37 to 44. When “45” is set, the actual feedrate is 45.
Draw
No.
B-65395EN/01-1
2. Summary of Change
Group Name / Outline New, Add Applicable
Correct, Del Date
Basic Function 1. Added standard parameter table Add 2006.02
Optional
Function
Unit
Maintenance
Parts
Notice
Correction
Another
TITLE
Notice of the update of software
88A6 series for I/O Link Option βi
DRAW. No.
B-65395EN/01-002
CUST.
2006.2.09 Ikai Newly designed
Design.
SHEET
Ed. Date Description FANUC LTD 1/7
Notice of the update of software 88A6 series for I/O Link Option βi
We report the update of Software 88A6 series for I/O Link Option βi.
1. Update Edition
2. Contents of change
2. Attachment
1. Attachment 1 B.6 SERVO PARAMETERS : The motor type was added in order to load the standard
parameter for rotating the servo motor.
2. Attachment 2 B.7 DIGITAL SERVO STANDARD PARAMETER TABLE : The standard parameter
table was added.
TITLE
Notice of the update of software
88A6 series for I/O Link Option βi
DRAW. No.
B-65395EN/01-002
CUST.
2006.2.09 Ikai Newly designed
Design.
SHEET
Ed. Date Description FANUC LTD 2/7
Attachment 1: B.6 SERVO PARAMETERS : The motor type was added in order to load the
standard parameter for rotating the servo motor.
The motor type was added in order to load the standard parameter by setting
the motor type number at No.125.
No
125 Motor type number
[Syze] : 2-byte
[Valid data range] : 1 to 350
Set the type number of a motor to use.
Ensure that parameter No.030 is 0.
The models, drawing numbers, and type numbers of the motors that can be
used with the βi SV listed below.
βiSV 4
βiSV 20
Motor model αiF 1/5000 βiS 2/4000 αiF 2/5000 βiS 4/4000 βiS 8/3000
βiSV 40
Motor model βiS 12/3000 αiF 4/4000 βiS 22/2000 αiF 8/3000 αiC 22/2000
TITLE
Notice of the update of software
88A6 series for I/O Link Option βi
DRAW. No.
B-65395EN/01-002
CUST.
2006.2.09 Ikai Newly designed
Design.
SHEET
Ed. Date Description FANUC LTD 3/7
βiSV 80
Motor model αiS 8/4000 αiS 12/4000 αiS 8/6000 αiF 12/3000 αiF 22/3000
βiSV 10 HV
Motor model βiS 2/4000HV αiS 2/5000HV βiS 4/4000HV αiS 4/5000HV βiS 8/3000HV
βiSV 20 HV
Motor model βiS 12/3000HV αiF 4/4000HV βiS 22/2000HV αiF 8/3000HV
βiSV 40 HV
Motor model αiS 8/4000HV αiS 12/4000HV αiS 8/6000HV αiF 12/3000HV αiF 22/3000HV
TITLE
Notice of the update of software
88A6 series for I/O Link Option βi
DRAW. No.
B-65395EN/01-002
CUST.
2006.2.09 Ikai Newly designed
Design.
SHEET
Ed. Date Description FANUC LTD 4/7
Attachment 2: B.7 DIGITAL SERVO STANDARD PARAMETER TABLE : The standard
parameter table was added.
βiS 2 αiF 1 βiS 2 αiF 2 βiS 4 βiS 8 βiS 0.2 βiS 0.3
Motor model 4000HV 5000 4000 5000 4000 3000 5000 5000
Motor Specification 0062 0202 0061 0205 0063 0075 0111 0112
Symbol Motor ID No. 251 252 253 255 256 258 260 261
19 00001100 00001000 00001100 00001000 00001100 00001100 00000000 00000000
PK1 70 348 620 360 760 400 650 123 210
PK2 71 -1676 -3034 -1920 -3743 -1920 -3831 -510 -970
PK3 72 -1232 -1256 -1237 -1283 -1253 -1299 -1069 -1146
PK1V 73 76 64 76 74 109 160 4 4
PK2V 74 -683 -580 -681 -664 -984 -1441 -35 -32
PK4V 75 -8235 -8235 -8235 -8235 -8235 -8235 -8235 -8235
PPMAX 76 21 21 21 21 21 21 21 21
PDDP 77 1894 1894 1894 1894 1894 1894 1894 1894
PVPA 78 -10250 0 -10250 -12298 -7694 -5140 0 0
PALPH 79 -1000 0 -1000 -1275 -2800 -3200 0 0
TQLIM 80 6554 7282 6554 7282 7282 7282 7282 7282
POVC1 81 32655 32692 32652 32635 32532 32385 32583 32583
POVC2 82 1411 948 1455 1664 2945 4788 2312 2312
POVCLMT 83 4189 2812 4317 4941 8758 14271 6869 6869
AALPH 84 20480 20480 16384 12288 20480 16384 20480 20480
DBLIM 85 0 0 0 0 0 0 0 0
MGSTCM 86 1048 32 1048 32 780 1807 1 1
DETQLM 87 11600 10260 11600 10280 7790 7930 7710 7700
NINTCT 88 2345 1188 1172 1276 796 1442 379 852
MFWKCE 89 1000 1667 2500 2000 3000 3500 0 3000
MFWKBL 90 3358 3858 3358 3862 3392 1298 0 3880
EMFCMP 99 0 -5130 0 -10 0 -2570 0 0
PK2VAUX 101 0 0 0 0 0 0 0 0
TRQCST 112 119 72 119 109 146 226 7 14
MDLCST 115 1850 1088 1856 951 1284 877 18132 19686
PHDLY1 118 7192 7690 7192 7693 8992 3858 7700 7695
PHDLY2 119 8990 12840 8990 12840 12864 8990 12825 12840
TITLE
Notice of the update of software
88A6 series for I/O Link Option βi
DRAW. No.
B-65395EN/01-002
CUST.
2006.2.09 Ikai Newly designed
Design.
SHEET
Ed. Date Description FANUC LTD 5/7
αiC 4 βiS 12 αiF 4 βiS 22 αiF 4 αiC 8 αiF 8 βiS 22
Motor model 3000 3000 4000 2000 4000HV 2000i 3000 2000HV
Motor Specification 0221 0078 0223 0085 0225 0226 0227 0086
Symbol Motor ID No. 271 272 273 274 275 276 277 278
19 00001000 00001100 00000000 00001100 00001000 00001000 00000000 00001100
PK1 70 1240 402 993 1184 570 1276 787 1446
PK2 71 -6415 -2217 -4260 -6800 -3578 -6288 -4184 -5822
PK3 72 -1309 -1304 -1311 -1331 -1309 -1326 -1325 -1332
PK1V 73 113 166 104 236 110 146 110 238
PK2V 74 -1009 -1494 -931 -2121 -985 -1310 -985 -2130
PK4V 75 -8235 -8235 -8235 -8235 -8235 -8235 -8235 -8235
PPMAX 76 21 21 21 21 21 21 21 21
PDDP 77 1894 1894 1894 1894 1894 1894 1894 1894
PVPA 78 -5915 -5140 -11789 -3612 0 -3854 -6420 -3612
PALPH 79 -1500 -3500 -180 -3000 0 -1236 -2000 -3000
TQLIM 80 7282 7282 8010 7282 7282 7282 8010 7282
POVC1 81 32590 32491 32610 32428 32591 32434 32579 32430
POVC2 82 2225 3465 1979 4249 2216 4170 2363 4227
POVCLMT 83 6612 10311 5879 12656 6583 12420 7020 12588
AALPH 84 12288 16384 8192 16384 12288 8192 8192 8192
DBLIM 85 0 0 15000 0 0 0 15000 0
MGSTCM 86 1289 1814 32 0 1032 1552 776 0
DETQLM 87 3900 7930 5130 2866 0 3880 3870 2866
NINTCT 88 2544 1194 1443 2459 2573 2380 2103 5149
MFWKCE 89 5000 3000 2000 5000 4000 4500 3500 3000
MFWKBL 90 1812 2056 3338 562 3348 1550 1815 562
EMFCMP 99 0 0 -5130 -5130 0 0 0 0
PK2VAUX 101 0 0 0 0 0 0 0 0
TRQCST 112 190 418 201 692 190 277 369 689
MDLCST 115 626 845 678 596 641 482 641 593
PHDLY1 118 3855 5138 6670 3350 5130 3860 0 3352
PHDLY2 119 8995 8990 8980 8979 8990 8990 0 8989
αiF 8 βiS 0.4 βiS 0.5 βiS 1 αiS 2 αiS 8 αiS 8 αiS 2
Motor model 3000HV 5000 6000 6000 6000 4000 4000HV 6000HV
Motor Specification 0229 0114 0115 0116 0218 0235 0236 0219
Symbol Motor ID No. 279 280 281 282 284 285 286 287
19 00001000 00000000 00001000 00001000 00001000 00001000 00001000 00001000
PK1 70 1222 100 138 312 552 550 694 497
PK2 71 -5890 -430 -673 -1360 -2288 -3449 -3858 -2371
PK3 72 -1322 -2463 -1205 -1203 -1252 -1307 -1318 -1249
PK1V 73 110 7 6 6 47 32 33 47
PK2V 74 -984 -59 -57 -51 -419 -287 -298 -419
PK4V 75 -8235 -8235 -8235 -8235 -8235 -8235 -8235 -8235
PPMAX 76 21 21 21 21 21 21 21 21
PDDP 77 1894 1894 1894 1894 1894 1894 1894 1894
PVPA 78 -6159 0 0 -15420 -13062 -7685 -7685 -13062
PALPH 79 -1261 0 0 -1000 -1000 -2000 -2000 -1200
TQLIM 80 8010 4660 5826 6554 7282 7282 7282 7282
POVC1 81 32579 32640 32674 32695 32595 32690 32683 32595
POVC2 82 2358 1603 1178 915 2168 978 1056 2164
POVCLMT 83 7007 4759 3497 2714 6441 2901 3134 6430
AALPH 84 12288 20480 20480 20480 20480 0 8192 20480
DBLIM 85 0 0 0 0 0 0 0 0
MGSTCM 86 782 30 25 1556 1555 519 519 1555
DETQLM 87 0 10290 10290 10290 11550 7268 7268 11550
NINTCT 88 4191 400 504 881 1137 2106 5103 2302
MFWKCE 89 6000 0 0 1500 3000 4000 4500 2200
MFWKBL 90 1810 0 0 5135 4112 2580 2580 4112
EMFCMP 99 0 -12850 -12850 -12850 0 0 0 0
PK2VAUX 101 0 0 0 0 0 0 0 0
TRQCST 112 369 22 42 89 96 562 541 96
MDLCST 115 642 10651 11014 12232 1507 2197 2113 1507
PHDLY1 118 5150 7690 7690 15400 7690 5150 5150 7690
PHDLY2 119 8990 12820 12820 12840 7740 8990 8990 7740
TITLE
Notice of the update of software
88A6 series for I/O Link Option βi
DRAW. No.
B-65395EN/01-002
CUST.
2006.2.09 Ikai Newly designed
Design.
SHEET
Ed. Date Description FANUC LTD 6/7
αiS 12 αiS 12 αiS 8 αiC 12 αiS 8 αiF 12 αiF 12 αiC 22
Motor model 4000 4000HV 6000 2000 6000HV 3000 3000HV 2000
Motor Specification 0238 0239 0232 0241 0233 0243 0245 0246
Symbol Motor ID No. 288 289 290 291 292 293 295 296
19 00001000 00001000 00001000 00000000 00001000 00000000 00000000 00001000
PK1 70 570 783 460 1875 381 1701 1200 2320
PK2 71 -3358 -4294 -1760 -9137 -1749 -6391 -6059 -10593
PK3 72 -1319 -1333 -1305 -1339 -1305 -1315 -1339 -1347
PK1V 73 51 51 52 273 52 188 188 264
PK2V 74 -454 -458 -466 -2445 -466 -1681 -1686 -2368
PK4V 75 -8235 -8235 -8235 -8235 -8235 -8235 -8235 -8235
PPMAX 76 21 21 21 21 21 21 21 21
PDDP 77 1894 1894 1894 1894 1894 1894 1894 1894
PVPA 78 -5898 -5898 -16398 -1804 -16398 -8199 -8203 -2597
PALPH 79 -3000 -3000 -1000 -2500 -1000 -747 -1178 -1942
TQLIM 80 7282 7282 7282 7282 7282 7282 7282 8010
POVC1 81 32653 32651 32554 32317 32554 32552 32550 32348
POVC2 82 1435 1461 2675 5644 2675 2702 2719 5248
POVCLMT 83 4259 4336 7952 16838 7952 8031 8083 15648
AALPH 84 0 8192 8192 8192 8192 8192 12288 4096
DBLIM 85 0 0 0 15000 0 15000 15000 0
MGSTCM 86 521 521 1284 0 1284 32 774 1548
DETQLM 87 6174 6159 10255 2168 10255 0 0 2600
NINTCT 88 1592 4904 801 4150 1600 2388 4787 3695
MFWKCE 89 2000 2000 1000 12000 1400 2000 4000 4000
MFWKBL 90 2575 2575 5388 1044 5390 2568 2320 1046
EMFCMP 99 0 0 -12850 0 -12850 0 0 0
PK2VAUX 101 0 0 0 0 0 0 0 0
TRQCST 112 696 690 346 350 346 517 516 680
MDLCST 115 1389 1377 1354 258 1354 376 375 267
PHDLY1 118 6174 6174 10250 5150 10260 0 0 2070
PHDLY2 119 8990 8990 12830 8990 12835 0 0 9000
TITLE
Notice of the update of software
88A6 series for I/O Link Option βi
DRAW. No.
B-65395EN/01-002
CUST.
2006.2.09 Ikai Newly designed
Design.
SHEET
Ed. Date Description FANUC LTD 7/7
Notice Concerning Reference Position Setting
2. Summary of Change
Optional
Function
Unit
Maintenance
Parts
Notice Notice concerning reference position setting of New Immediately
machine is summarized.
Correction
Another
TITLE
Power Mate i-D/H CONNECTION MANUAL (FUNCTION)
I/O Link βi MAINTENANCE MANUAL
Notice Concerning Reference Position Setting
DRAW. No. CUST.
B-63173EN-1/02-15
B-65395EN/01-03
01 2009.6.1 Newly designed SHEET
(1) Abstract
In case reference position is set by parameter (No.1815#4 is set) with absolute
detector, when reference position is lost by some reason, it becomes impossible
to set accurate reference position again by FANUC service engineer or
end-user. In such a case, it is necessary for Machine tool builder to set
reference position.
In this manual, notice concerning reference position setting is summarized in
order to set reference point in the field as early as possible.
(2) Reference position setting methods and each merit and demerit
There exist following methods for reference position setting, and we are going
to show merits and demerits of each method.
Method for
Reference Position Method Merit Demerit
Setting
Reference position return is • Most reliable method to • Deceleration dog is
Manual Reference executed by both grid reproduce reference required.
Position Return generated from position position
detector and deceleration dog
Grid generated from position • Deceleration dog is • In case start point of
detector is used. unnecessary. reference position is
Reference position setting is • So long as start point unclear, reference
Reference Position
executed just before of of reference position position can not be set.
Setting without Dog
reference position and setting is clear, reference
is executed without dog. position can be set
easily.
First axis pushes mechanical • Deceleration dog is • Considering the
stopper, and withdraws unnecessary. distortion of mechanical
Reference Position
pre-decided distance from the • Reference position stopper or some
Setting with
mecahnical stopper, then can be set easily. materials between axis
Mechanical Stopper
reference position is set. and stopper, reference
Note)
position setting is not
accurate.
Reference position setting by • Deceleration dog is • Reference position
setting external signal to 1 unnecessary. setting is not
Reference Position
Available only in case that • Reference position accurately.
External Setting
accurate reference position is can be set easily.
NOT required.
Note) Reference Position Setting with Mechanical Stopper is not supported in I/O Link βi.
Depending on above situation, we are going to show points to be concerned
concerning reference position setting.
TITLE
Power Mate i-D/H CONNECTION MANUAL (FUNCTION)
I/O Link βi MAINTENANCE MANUAL
Notice Concerning Reference Position Setting
DRAW. No. CUST.
B-63173EN-1/02-15
B-65395EN/01-03
01 2009.6.1 Newly designed SHEET
In these cases, it often takes log time to establish reference position again, as a
result, causes large trouble to end-user site.
TITLE
Power Mate i-D/H CONNECTION MANUAL (FUNCTION)
I/O Link βi MAINTENANCE MANUAL
Notice Concerning Reference Position Setting
DRAW. No. CUST.
B-63173EN-1/02-15
B-65395EN/01-03
01 2009.6.1 Newly designed SHEET
Please apply Manual Reference Position Return that uses grid method as much as possible.
In case Reference Position Setting without Dog is applied, please consider Eye Mark” not to
disappear or can be always visible without removing mechanical cover and so on.
In case Reference Position Setting with Mechanical Stopper, please design the machine to
avoid distortion of mechanical stopper or some materials between axis and stopper.
Reference Position External Setting should be applied only in case that it is NOT necessary to
establish reference position at accurate position, and “Eye Mark” should be prepared to set of
reference position.
Please attach manual to the machine tool describing “How to establish reference position of
each axis”.
TITLE
Power Mate i-D/H CONNECTION MANUAL (FUNCTION)
I/O Link βi MAINTENANCE MANUAL
Notice Concerning Reference Position Setting
DRAW. No. CUST.
B-63173EN-1/02-15
B-65395EN/01-03
01 2009.6.1 Newly designed SHEET