LigoWave RapidFire delivers powerful performance with its new 1.2GHz CPU dedicated for data processing and high (200,000) packet per second delivery. Equipped with two Gigabit Ethernet ports, one with PoE passthrough, the unit is ideal for high-security video surveillance scenarios. RapidFire incorporates integrated surge and ESD protection according to IEC standards and passes Class 4 requirements.
Wireless Configuration Interface An internal 2.4GHz radio allows access into the Rapidfire GUI by wireless connection with any WIFI equipped device. This feature expedites the installation of links and alleviates the problem of troubleshooting in difficult-to-reach locations. Tests prove accessibility even when mounted on top of a 10-story building while standing 20 meters (65 ft) away!
Powerful OS The LigoPTP operating system ensures easy and rapid deployment of point-to-point links with stable, fast performance. An intuitive and responsive user interface adjusts the layout based on the size of your screen. Essential tools including Setup Wizard, link test, antenna alignment, spectrum analyzer, and site survey are included to make set-up and troubleshooting more efficient. Automatic mechanisms such as auto-channel and automatic transmit power control optimize the link for maximum performance even in areas with high interference.
Setup Wizard Spectrum Analyzer Single Side Configuration A link setup wizard guides the installer The integrated spectrum analyzer LigoPTP RapidFire simplifies link through the important steps of the demonstrates the noise floor in order to configuration by supporting single set-up process. find the optimum frequency. side configuration as parameters are automatically applied to slave units once set on the master side.
Easy Pre-Configuration Multiple options to pre-configure LigoPTP RapidFire devices are displayed in a scheme below. Devices can be connected with each other using wired or wireless connectivity. End-user device can also connect to the master device using 2.4GHz access radio or using wire to the Ethernet port of the master device. LigoPTP RapidFire devices can be discovered using bonjour and SSDP protocols as well.
DC input voltage range 44.0–57.0V DC input IEEE 802.3af/at compliant POE output Data input jack RJ45 Output power up to 28W Data + Power output jack RJ45 Power output RJ45 pins 1,2,4,5 (+) and 3,6,7,8 (-) Dimensions 117×87×34mm Data rate 10/100/1000Mbps Weight 270g Surge protection 2kV line to line, Operating temperature –40 to +65C 6kV line to ground (output port) UTP/FTP cable length 100m total (from switch to the device)
Power Power input method, voltage PoE 802.3at, isolated 42 - 57VDC Power consumption (max) 8.6W Power output method, voltage PoE 802.3af, 48VDC, 12.95W maximum PoE inserter and AC/DC adapter are included
Software features • Wizard for fast link setup • Centralized control from master: A) Common wireless link parameters; B) Individual slave parameters • Smart Auto-channel • Robust data security • QoS with hardware acceleration • Spectrum analyzer • Wireless signal and device state indication on RGB LEDs • Dual firmware image
Management Dedicated 2.4GHz radio for management System monitoring STP/SNMP (V1), GUI/HTTP(S), Shell/SSH and WNMS System configuration GUI/HTTP(S) and WNMS
