Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    Ink Level Reset For HP

    Uploaded by

    Stefanos Mantatzis
    This document provides instructions for resetting the ink level indicator for HP ink cartridge #57. The instructions involve removing the cartridge from the printer, placing tape over two contacts, reinserting the cartridge to print alignment pages, removing the tape, and reinserting the cartridge which should now read as full. It is important that no adhesive remains on the contacts after removing the tape.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Ink Level Reset For HP

    Uploaded by

    Stefanos Mantatzis
    66 views2 pages
    This document provides instructions for resetting the ink level indicator for HP ink cartridge #57. The instructions involve removing the cartridge from the printer, placing tape over two contacts, reinserting the cartridge to print alignment pages, removing the tape, and reinserting the cartridge which should now read as full. It is important that no adhesive remains on the contacts after removing the tape.

    Original Description:

    Ink Level Reset for Hp

    Original Title

    Ink Level Reset for Hp

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for resetting the ink level indicator for HP ink cartridge #57. The instructions involve removing the cartridge from the printer, placing tape over two contacts, reinserting the cartridge to print alignment pages, removing the tape, and reinserting the cartridge which should now read as full. It is important that no adhesive remains on the contacts after removing the tape.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    66 views2 pages

    Ink Level Reset For HP

    Uploaded by

    Stefanos Mantatzis
    This document provides instructions for resetting the ink level indicator for HP ink cartridge #57. The instructions involve removing the cartridge from the printer, placing tape over two contacts, reinserting the cartridge to print alignment pages, removing the tape, and reinserting the cartridge which should now read as full. It is important that no adhesive remains on the contacts after removing the tape.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    INK LEVEL RESET FOR #57

    If you currently use the following HP ink jet cartridge:


    #57 C6657
    this will allow you to reset the ID system & Ink Level Indicator built into the printer.

    RESETTING
    1. Remove cartridge from your printer.

    2. Place a piece of tape over the top left contact as shown in red on the picture to the right.

    3. With the tape covering the contact place cartridge back into printer.

    4. The printer will perform and alignment page.

    5. Once an alignment page has been printed remove cartridge from printer.

    6. Place a piece of tape over the second contact shown in red.

    7. Place cartridge into printer with both pieces of tape. (One covering the first contact and one
    cover the second contact.)

    8. Printer will print another alignment page.

    9. Once the second alignment page has been printed remove cartridge from printer.

    10. Remove tape pieces from cartridge contacts

    Make sure there is no residual adhesive on cartridge contacts.

    11. Place cartridge into printer. Cartridge should now read full.

    Additional Notes:
    As stated above it is very important that there is no residual adesive on the cartridge contact
    point. This will make reading the cartridge difficult.

    If for some reason this does not work for you then you will need to repeat this process. We
    have tested this process on every model of printer using these cartridge
    INK LEVEL RESET FOR #56 & #58

    If you currently use the following HP ink jet cartridges:


    #56 C6656
    #58 C6658
    this will allow you to reset the ID system & Ink Level Indicator built into the printer.

    RESETTING
    1. Remove cartridge from your printer.

    2. Place a piece of tape over the top left contact as shown in red on the picture to the right.

    3. With the tape covering the contact place cartridge back into printer.

    4. The printer will perform and alignment page.

    5. Once an alignment page has been printed remove cartridge from printer.

    6. Place a piece of tape over the second contact shown in red.

    7. Place cartridge into printer with both pieces of tape. (One covering the first contact and one
    cover the second contact.)

    8. Printer will print another alignment page.

    9. Once the second alignment page has been printed remove cartridge from printer.

    10. Remove tape pieces from cartridge contacts

    Make sure there is no residual adhesive on cartridge contacts.

    11. Place cartridge into printer. Cartridge should now read full.

    Additional Notes:
    As stated above it is very important that there is no residual adesive on the cartridge contact
    point. This will make reading the cartridge difficult.

    You might also like