IVMS-4200 User Manual

User Manual of iVMS-4200
iVMS-4200 Client Software

User Manual
1
User Manual
COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual

This Manual is applicable to iVMS-4200 Client Software.
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWAR
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
i
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE
OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT
YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
ii
Contents
Chapter 1 Overview.......................................................................................................................... 7
1.1 Description ...................................................................................................................... 7
1.2 Running Environment ...................................................................................................... 7
1.3 Function Modules ............................................................................................................ 7
1.4 Update Instructions ....................................................................................................... 11
Chapter 2 User Registration and Login ........................................................................................... 13
Chapter 3 Device Management...................................................................................................... 15
3.1 Adding Device ................................................................................................................ 15
3.1.1 Activating Device ................................................................................................... 16
3.1.2 Adding Online Devices .......................................................................................... 18
3.1.3 Adding Devices by IP or Domain Name ................................................................. 24
3.1.4 Adding Devices by IP Segment .............................................................................. 25
3.1.5 Adding Devices by Hik-Connect Domain ............................................................... 26
3.1.6 Adding Devices by EHome Account....................................................................... 27
3.1.7 Adding Devices by Serial Port ................................................................................ 28
3.1.8 Adding Devices by IP Server .................................................................................. 29
3.1.9 Adding Devices by HiDDNS .................................................................................... 30
3.1.10 Importing Devices in Batch ................................................................................... 31
3.1.11 QR Code of Encoding Devices ............................................................................... 33
3.1.12 ............................................................................. 34
3.2 Group Management ...................................................................................................... 34
3.2.1 Adding Group ........................................................................................................ 35
3.2.2 Importing Encoding Device to Group .................................................................... 36
3.2.3 Modifying Group/Camera ..................................................................................... 36
3.2.4 Removing Cameras from the Group ...................................................................... 37
3.2.5 Deleting Group ...................................................................................................... 38
Chapter 4 Live View ........................................................................................................................ 39
4.1 Starting and Stopping Live View .................................................................................... 42
4.2 Auto-switch in Live View................................................................................................ 44
4.3 PTZ Control in Live View ................................................................................................ 45
4.4 Manual Recording and Capture ..................................................................................... 48
4.5 Instant Playback ............................................................................................................. 51
4.6 Custom Window Division............................................................................................... 53
4.7 Live View in Fisheye Mode ............................................................................................ 54
4.8 Starting Master-slave Linkage........................................................................................ 57
4.9 Other Functions in Live View ......................................................................................... 59
Chapter 5 Remote Storage Schedule Settings and Playback .......................................................... 60
5.1 Remote Storage ............................................................................................................. 60
5.1.1 Storing on DVR, NVR, or Network Camera ............................................................ 60
5.1.2 Storing on Storage Device ..................................................................................... 63
5.2 Remote Playback ........................................................................................................... 67
5.2.1 Normal Playback.................................................................................................... 68
1
5.2.2 Alarm Input Playback ............................................................................................ 72

5.2.3 Event Playback....................................................................................................... 73
5.2.4 ATM Playback ........................................................................................................ 75
5.2.5 POS Playback ......................................................................................................... 76
5.2.6 Synchronous Playback ........................................................................................... 77
5.2.7 VCA Playback ......................................................................................................... 77
5.2.8 Fisheye Playback ................................................................................................... 79
5.2.9 Downloading Video Files ....................................................................................... 80
Chapter 6 Event Management ....................................................................................................... 85
6.1 Configuring Motion Detection Alarm ............................................................................ 86
6.2 Configuring Video Tampering Alarm.............................................................................. 88
6.3 Configuring Video Loss Alarm ........................................................................................ 89
6.4 Configuring Audio Exception Alarm ............................................................................... 91
6.5 Configuring Face Detection Alarm ................................................................................. 92
6.6 Configuring Line Crossing Detection Alarm ................................................................... 94
6.7 Configuring Alarm Input Linkage ................................................................................... 95
6.8 Configuring Device Exception Linkage ........................................................................... 96
Chapter 7 Alarm and Event Center ................................................................................................. 98
7.1 Viewing Alarms Information .......................................................................................... 99
7.2 Viewing Events Information ......................................................................................... 100
7.3 Viewing Pop-up Alarm Information ............................................................................. 101
Chapter 8 E-map Management .................................................................................................... 103
8.1 Adding an E-map ......................................................................................................... 103
8.2 Hot Spot Function ........................................................................................................ 105
8.2.1 Adding Hot Spots................................................................................................. 105
8.2.2 Modifying Hot Spots............................................................................................ 106
8.2.3 Previewing Hot Spots .......................................................................................... 107
8.3 Hot Region Function .................................................................................................... 107
8.3.1 Adding Hot Regions ............................................................................................. 108
8.3.2 Modifying Hot Regions ........................................................................................ 108
8.3.3 Previewing Hot Regions....................................................................................... 109
Chapter 9 Hik-Connect ................................................................................................................. 110
9.1 Registering a Hik-Connect Account ............................................................................. 110
9.2 Logging into Hik-Connect Account .............................................................................. 111
9.3 Device Management.................................................................................................... 111
9.3.1 Adding Device to Hik-Connect Account .............................................................. 112
9.3.2 Remote Configuration ......................................................................................... 113
9.3.3 Group Management ............................................................................................ 113
9.3.4 Modifying Camera ............................................................................................... 114
9.4 Live View and Playback ................................................................................................ 114
Chapter 10 VCA Devices Management .......................................................................................... 116
10.1 Allocating VCA Resource .............................................................................................. 116
10.2 Configuring VCA Settings ............................................................................................. 117
Chapter 11 Forwarding Video Stream through Stream Media Server ........................................... 118
2
11.1 Adding Stream Media Server ....................................................................................... 118

11.2 Adding Cameras to Stream Media Server to Forward Video Stream .......................... 119
Chapter 12 Decoding and Displaying Video on Video Wall ............................................................ 120
12.1 Adding Encoding Device .............................................................................................. 120
12.2 Adding Decoding Device .............................................................................................. 122
12.3 Configuring Video Wall Settings .................................................................................. 123
12.3.1 Linking Decoding Output with Video Wall .......................................................... 123
12.3.2 Multi-Screen Display ........................................................................................... 125
12.3.3 Configuring Background ...................................................................................... 126
12.3.4 Configuring Virtual LED ....................................................................................... 127
12.4 Displaying Video on Video Wall ................................................................................... 128
12.4.1 Decoding and Displaying ..................................................................................... 128
12.4.2 Windowing and Roaming Settings ...................................................................... 130
12.4.3 Configuring Playback ........................................................................................... 131
12.4.4 Configuring Cycle Decoding ................................................................................. 132
Chapter 13 Security Control Panel ................................................................................................. 133
13.1 Configuring Zone Event................................................................................................ 133
13.2 Remote Control ........................................................................................................... 134
13.2.1 Display Mode....................................................................................................... 135
13.2.2 Partition Remote Control .................................................................................... 136
13.2.3 Zone Remote Control .......................................................................................... 137
13.3 Displaying Zone on E-map ........................................................................................... 138
13.4 Handling Alarms .......................................................................................................... 140
13.4.1 Real-time Alarm .................................................................................................. 141
13.4.2 Searching History Alarms .................................................................................... 142
13.4.3 Handling Panic Alarm .......................................................................................... 143
Chapter 14 Pyronix Control Panel .................................................................................................. 145
14.1 Device Management.................................................................................................... 145
14.1.1 Adding Pyronix Control Panel .............................................................................. 145
14.1.2 Authorizing iVMS-4200 via PyronixCloud ............................................................ 147
14.1.3 Setting Working Mode ........................................................................................ 149
14.2 Configuring Event ........................................................................................................ 150
14.3 Remote Control ........................................................................................................... 151
14.3.1 Partition Remote Control .................................................................................... 151
14.3.2 Zone Remote Control .......................................................................................... 152
14.3.3 Alarm Output Remote Control ............................................................................ 152
Chapter 15 Access Control ............................................................................................................. 154
15.1 Access Control Device Management ........................................................................... 155
15.1.1 Viewing Device Status ......................................................................................... 155
15.1.2 Editing Basic Information .................................................................................... 156
15.1.3 Network Settings ................................................................................................. 157
15.1.4 Capture Settings .................................................................................................. 159
15.1.5 RS-485 Settings.................................................................................................... 161
15.1.6 Authenticating M1 Card Encryption .................................................................... 161
3
15.1.7 Remote Configuration ......................................................................................... 162

15.2 Organization Management .......................................................................................... 174
15.2.1 Adding Organization ............................................................................................ 174
15.2.2 Modifying and Deleting Organization ................................................................. 174
15.3 Person Management ................................................................................................... 174
15.3.1 Adding Person ..................................................................................................... 175
15.3.2 Managing Person................................................................................................. 186
15.3.3 Issuing Card in Batch ........................................................................................... 186
15.4 Schedule and Template ............................................................................................... 189
15.4.1 Week Schedule .................................................................................................... 189
15.4.2 Holiday Group ..................................................................................................... 190
15.4.3 Template.............................................................................................................. 191
15.5 Permission Configuration ............................................................................................ 193
15.5.1 Adding Permission ............................................................................................... 194
15.5.2 Applying Permission ............................................................................................ 195
15.6 Advanced Functions .................................................................................................... 196
15.6.1 Access Control Parameters .................................................................................. 196
15.6.2 Card Reader Authentication ................................................................................ 199
15.6.3 Multiple Authentication ...................................................................................... 201
15.6.4 Open Door with First Card ................................................................................... 203
15.6.5 Anti-Passing Back ................................................................................................ 205
15.6.6 Cross-Controller Anti-passing Back ..................................................................... 206
15.6.7 Multi-door Interlocking ....................................................................................... 208
15.6.8 Authentication Password .................................................................................... 209
15.6.9 Relay Settings ...................................................................................................... 211
15.6.10 Custom Wiegand ......................................................................................... 213
15.7 Searching Access Control Event ................................................................................... 215
15.7.1 Searching Local Access Control Event ................................................................. 215
15.7.2 Searching Remote Access Control Event ............................................................. 216
15.8 Access Control Event Configuration............................................................................. 216
15.8.1 Access Control Event Linkage .............................................................................. 216
15.8.2 Access Control Alarm Input Linkage .................................................................... 218
15.8.3 Event Card Linkage .............................................................................................. 218
15.8.4 Cross-Device Linkage ........................................................................................... 221
15.9 Door Status Management ........................................................................................... 222
15.9.1 Access Control Group Management ................................................................... 222
15.9.2 Controlling Door Status ....................................................................................... 224
15.9.3 Controlling Floor Status ....................................................................................... 225
15.9.4 Configuring Status Duration for Door .................................................................. 226
15.9.5 Configuring Status Duration for Floor ................................................................. 227
15.9.6 Real-time Card Swiping Record ........................................................................... 228
15.9.7 Real-time Access Control Alarm .......................................................................... 229
15.10 Controlling Door during Live View ............................................................................... 230
15.11 Displaying Access Control Point on E-map .................................................................. 231
4
Chapter 16 Time and Attendance .................................................................................................. 234

16.1 Shift Schedule Management ....................................................................................... 235
16.1.1 Shift Settings ....................................................................................................... 235
16.1.2 Shift Schedule Settings ........................................................................................ 237
16.2 Attendance Handling ................................................................................................... 242
16.2.1 Check-in/out Correction ...................................................................................... 243
16.2.2 Leave and Business Trip ....................................................................................... 244
16.2.3 Manual Calculation of Attendance ...................................................................... 246
16.3 Advanced Settings ....................................................................................................... 246
16.3.1 Basic Settings....................................................................................................... 246
16.3.2 Attendance Rule Settings .................................................................................... 247
16.3.3 Attendance Check Point Settings ........................................................................ 248
16.3.4 Holiday Settings ................................................................................................... 248
16.3.5 Leave Type Settings ............................................................................................. 249
16.4 Attendance Statistics ................................................................................................... 250
16.4.1 Attendance Summary .......................................................................................... 251
16.4.2 Attendance Details .............................................................................................. 251
16.4.3 Abnormal Attendance ......................................................................................... 252
16.4.4 Overtime Search .................................................................................................. 253
16.4.5 Card Swiping Log ................................................................................................. 253
16.4.6 Report.................................................................................................................. 253
Chapter 17 Video Intercom ............................................................................................................ 255
17.1 Video Intercom ............................................................................................................ 255
17.1.1 Calling Indoor Station via iVMS-4200 .................................................................. 255
17.1.2 Calling iVMS-4200 via Indoor Station/Door Station ............................................ 257
17.1.3 Viewing Live Video of Door Station and Outer Door Station .............................. 258
17.2 Real-Time Call Logs ...................................................................................................... 259
17.3 Releasing Notice .......................................................................................................... 260
17.4 Searching Video Intercom Information ....................................................................... 261
17.4.1 Searching Call Logs .............................................................................................. 261
17.4.2 Searching Unlocking Logs .................................................................................... 262
17.4.3 Searching Notice ................................................................................................. 263
Chapter 18 Log Management ......................................................................................................... 266
Chapter 19 Account Management ................................................................................................. 269
19.1 Adding User ................................................................................................................. 269
19.2 Managing User ............................................................................................................ 270
Chapter 20 System Configuration................................................................................................... 271
20.1 General Settings .......................................................................................................... 271
20.2 Live View and Playback Settings .................................................................................. 273
20.3 Image Settings ............................................................................................................. 274
20.4 File Saving Path Settings .............................................................................................. 275
20.5 Toolbar Settings ........................................................................................................... 275
20.6 Keyboard and Joystick Shortcuts Settings ................................................................... 276
20.7 Alarm Sound Settings .................................................................................................. 277
5
20.8 Email Settings .............................................................................................................. 278

20.9 Video Intercom Settings .............................................................................................. 279
20.10 Access Control Settings................................................................................................ 279
Chapter 21 Statistics ....................................................................................................................... 281
21.1 Heat Map ..................................................................................................................... 281
21.2 People Counting Statistics ........................................................................................... 283
21.3 Counting Statistics ....................................................................................................... 284
21.4 Road Traffic .................................................................................................................. 286
21.5 Face Retrieval .............................................................................................................. 288
21.6 License Plate Retrieval ................................................................................................. 290
21.7 Behavior Analysis ......................................................................................................... 291
21.8 Face Capture ................................................................................................................ 292
Appendix A Custom Wiegand Rule Descriptions .................................................................................. 294
Appendix B Table of Audio Index Related Content ............................................................................... 296
Troubleshooting .................................................................................................................................... 297
FAQ ....................................................................................................................................................... 298
Error Code............................................................................................................................................. 299
6
Chapter 1 Overview
1.1 Description
iVMS-4200 is a versatile security management software for the DVRs, NVRs, IP cameras, encoders,
decoders, security control panel, video intercom device, access control device, etc. It provides
multiple functionalities, including real-time live view, video recording, remote search and playback,
file backup, alarm receiving, etc., for the connected devices to meet the needs of monitoring task.
With the flexible distributed structure and easy-to-use operations, the client software is widely
applied to the surveillance projects of medium or small scale.
This user manual describes the function, configuration and operation steps of iVMS-4200 software.
To ensure the properness of usage and stability of the software, please refer to the contents below
and read the manual carefully before installation and operation.
1.2 Running Environment

Operating System: Microsoft Windows 7/Windows 8.1/Windows 10 (32-bit or 64-bit),
Microsoft Windows XP SP3 (32-bit),
Microsoft Windows 2008 R2/Windows Server 2012 (64-bit).
CPU: Intel Pentium IV 3.0 GHz or above
Memory: 2G or above
Video Card: RADEON X700 Series or above
GPU: 256 MB or above
Notes:
For high stability and good performance, these above system requirements must be met.
The software does not support 64-bit operating system; the above mentioned 64-bit operating
system refers to the system which supports 32-bit applications as well.
Hardware decoding function is only supported by operating systems the version of which is
after Windows XP.
1.3 Function Modules

Control Panel of iVMS-4200:
7
Menu Bar:
Open Image File Search and view the captured pictures stored on local PC.
Open Video File Search and view the video files recorded on local PC.
File
Open Log File View the backup log files.
Exit Exit the iVMS-4200 client software.
Lock Lock screen operations. Log in the client again to unlock.
Switch User Switch the login user.
Import System Config File Import client configuration file from your computer.
System Export System Config File Export client configuration file to your computer.
Set the schedule for backing up the database including
Auto Backup person, attendance data, and permission data
automatically.
1024*768 Display the window at size of 1024*768 pixels.
Maximize Display the window in maximum mode.
View
Control Panel Enter Control Panel interface.
Main View Open Main View page.
Remote Playback Open Remote Playback page.
Access Control Enter the Access Control Module.
Status Monitor Enter the Status Monitor Module.
8
Time and Attendance Enter the Time and Attendance Module.

Security Control Panel Enter the Security Control Panel Module.
Real-time Alarm Enter the Real-time Alarm Module.
Video Wall Open Video Wall page.
E-map Open E-map page.
Pyronix Control Panel Open Pyronix Control Panel page.
Auxiliary Screen Preview Open Auxiliary Screen Preview window.
Device Management Open the Device Management page.
Event Management Open the Event Management page.
Storage Schedule Open the Storage Schedule page.
Account Management Open the Account Management page.
Log Search Open the Log Search page.
System Configuration Open the System Configuration page.
Tool Broadcast Select camera to start broadcasting.
Device Arming Control Set the arming status of devices.
Alarm Output Control Turn on/off the alarm output.
Batch Wiper Control Batch starting or stopping the wipers of the devices.
Batch Time Sync Batch time synchronization of the devices.
Player Open the player to play the video files.
Message Queue Display the information of Email message to be sent.
Open the video guide for the video surveillance
Open Video Wizard
configuration.
Open Video Wall Wizard Open the guide for the video wall configuration.
Open Security Control Panel Open the guide for the security control panel
Wizard configuration.
Open Access Control and Open the guide for the access control and video intercom
Video Intercom Wizard configuration.
Help
Open the guide for the time and attendance
Open Attendance Wizard
configuration.
Click to open the User Manual; you can also open the User
User Manual (F1)
Manual by pressing F1 on your keyboard.
About View the basic information of the client software.
Select the language for the client software and reboot the
Language
software to activate the settings.
For the first time running the software, you can click on the control
panel to select the modules to display on the Operation and Control area of the control pane.
Steps:
1. Click to pop up the following dialog.
9
2. Check the module checkboxes to display them on the control panel according to the actual
needs.
3. Click OK to save the settings.
Notes:
After adding the access control device in Device Management module, the Access Control,
Status, and Time and Attendance module will be displayed on the control panel automatically.
After adding the security control panel in Device Management module, the Security Control
Panel and Real-time Alarm modules will be displayed on the control panel automatically.
The iVMS-4200 client software is composed of the following function modules:
The Main View module provides live view of network cameras and video encoders, and
supports some basic operations, such as picture capturing, recording, PTZ control, etc.
The Remote Playback module provides the search, playback, export of video files.
The Access Control module provides managing the organizations, persons, permissions,
and advanced access control functions.
Provides video intercom function.
The Status Monitor module provides monitoring and controlling the door status, viewing
the real-time card swiping records and access control events.
The Time and Attendance module provides setting the attendance rule for the employees
and generating the reports.
The Security Control Panel module provides operations such as arming, disarming,
bypass, group bypass, and so on for both the partitions and zones.
The Real-time Alarm module provides displaying the real-time alarm of security control
panel, acknowledging alarms, and searching the history alarms.
The Pyronix Control Panel module provides operations such as arming, disarming, bypass,
bypass recovery, and so on for partitions and zones. You can also control the alarm
outputs of the device.
The Alarm Event module displays the alarm and event received by the client software.
10
The Video Wall module provides the management of decoding device and video wall and
the function of displaying the decoded video on video wall.
The E-map module provides the displaying and management of E-maps, alarm inputs, hot
regions and hot spots.
The Device Management module provides the adding, modifying and deleting of different
devices and the devices can be imported into groups for management.
The Event Management module provides the settings of arming schedule, alarm linkage
actions and other parameters for different events.
The Storage Schedule module provides the schedule settings for recording and pictures.
The Account Management module provides the adding, modifying and deleting of user
accounts and different permissions can be assigned for different users.
The Log Search module provides the query of system log files and the log files can be
filtered by different types.
The System Configuration module provides the configuration of general parameters, file
saving paths, alarm sounds and other system settings.
For other statistics module description, refer to Chapter 21 Statistics.
The function modules are easily accessed by clicking the navigation buttons on the control panel or by
selecting the function module from the View or Tool menu.
You can check the information, including current user, network usage, CPU usage, memory usage and
time, in the upper-right corner of the main page.
1.4 Update Instructions

Pyronix Control Panel
Provide access of Pyronix control panel and remote control via client.
Optimize Hik-Connect Function
In Device Management module, optimize adding devices by Hik-Connect Domain.
Provide Live View, Playback, Remote Configuration for Hik-Connect Device
Provide live view, playback, remote configuration functions for Hik-Connect devices.
Permission Changed Hint
In Access Control module, provide hint to users when the configured permission is changed.
Access of Elevator Controller
Provide access of elevator controller.
M1 Card Encryption
Provide M1 card encryption function to encrypt the card sector if supported.
Face Picture Collection
Provide collecting the face picture when adding the person and link the face picture to the card.
Cross-Controller Anti-passing Back
Provide cross-controller anti-passing back function in Advanced Functions of Access Control
module for card readers in multiple access control devices.
Relay Settings
Provide relay settings in Advanced Functions of Access Control module for elevator controller.
11
Custom Wiegand
Provide custom wiegand settings in Advanced Functions of Access Control module to
communicate between the device and the third party card readers.
MAC Linkage
Provide MAC linkage for event card linkage.
Manual Calculation of Attendance
Provide calculation of attendance result manually if needed
EHome Protocol Port Settings
Set the EHome protocol port in System Configuration.
SSL and STARTTLS Encryption
Provide SSL and STARTTLS encryption in Email Settings.
Access Control Event Auto-Synchronization
Provide setting time to getting the access control events on device and save them to the client s
database automatically.
12
Chapter 2 User Registration and Login

For the first time to use iVMS-4200 client software, you need to register a super user for login.
Steps:
1. Input the super user name and password. The software will judge password strength
automatically, and we highly recommend you to use a strong password to ensure your data
security.
2. Confirm the password.
3. Optionally, check the checkbox Enable Auto-login to log into the software automatically.
4. Click Register. Then, you can log into the software as the super user.
A user name cannot contain any of the following characters: / \ : * ? < > |. And the length
of the password cannot be less than 6 characters.
For your privacy, we strongly recommend changing the password to something of your own
choosing (using a minimum of 8 characters, including upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
When opening iVMS-4200 after registration, you can log into the client software with the registered
user name and password.
Steps:
1. Input the user name and password you registered.
2. Optionally, check the checkbox Enable Auto-login to log into the software automatically.
3. Click Login.
13
After running the client software, you can open the wizards (including video wizard, video wall
wizard, security control panel wizard, access control and video intercom wizard, and attendance
wizard), to guide you to add the device and do other settings and operations. For detailed
configuration about the wizards, please refer to the Quick Start Guide of iVMS-4200.
14
Chapter 3 Device Management
3.1 Adding Device

Purpose:
After running the iVMS-4200, devices including network cameras, video encoders, DVRs, NVRs,
decoders, security control panels, video intercom devices, access control devices, etc., should be
added to the client for the remote configuration and management, such as live view, playback, alarm
settings, etc.
Perform the following steps to enter the Device Adding interface.
Steps:
1. Click the icon on the control panel,

or click Tools->Device Management to open the Device Management page.
2. Click the Device tab to enter the following interface.
3. On the Device Type panel on the right, you can select Hikvision Device to add the Hikvision
devices, including network cameras, video encoders, DVRs, NVRs, decoders, security control
panels, video intercom devices, access control devices, etc.
4. (Optional) Click Add New Device Type to add other types of devices, including Stream Media
Server, Hik-Connect device (device which supports Hik-Connect service), Pyronix control panel,
and Third-party encoding device.
Here we take adding Hikvision Device as an example.
You can add the device in the following ways:
To detect the online devices, refer to Chapter 3.1.2 Adding Online Devices.
15
To add device by specifying the device IP address or domain name, refer to Chapter 3.1.3
Adding Devices by IP or Domain Name.
To add device by specifying an IP segment, refer to Chapter 3.1.4 Adding Devices by IP Segment.
To add devices connected via Hik-Connect, refer to Chapter 3.1.5 Adding Devices by Hik-Connect
Domain.
To add access control devices via EHome protocol, refer to Chapter 3.1.6 Adding Devices by
EHome Account.
To add access control devices via serial port, refer to Chapter 3.1.7 Adding Devices by Serial
Port.
To add device by IP Server, refer to Chapter 3.1.8 Adding Devices by IP Server.
To add device by HiDDNS, refer to Chapter 3.1.9 Adding Devices by HiDDNS.
To add devices in batch, refer to Chapter 3.1.10 Importing Devices in Batch.
The devices will be displayed on the device list for management after added successfully. You can
check the resource usage, HDD status, recording status, and other information of the added devices
on the list.
Click Refresh All to refresh the information of all added devices. You can also input the device name
in the filter field for search.
Select device from the list, click Modify/Delete, and then you can modify/delete the information of
the selected device.
Select device from the list, click Remote Configuration, and then you can do some remote
configurations of the selected device if needed. For detailed settings about the remote configuration,
please refer to the User Manual of the devices.
Select access control device and CVR from the list, click Device Status to view the device status
including recording status, signal status, hardware status, etc.
Note: For CVR, You can click Device Status to view the recording status and ANR (Automatic Network
Replenishment) recording status.
3.1.1 Activating Device
Purpose:
For some devices, you are required to create the password to activate them before they can be
added to the software and work properly.
Note: This function should be supported by the device.
Steps:
1. Enter the Device Management page.
2. On the Device for Management or Online Device area, check the device status (shown on
Security column) and select an inactive device.
3. Click the Activate button to pop up the Activation interface.

16
4. Create a password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
5. (Optional) Enable Hik-Connect service when activating the device if the device supports.
1) Check Enable Hik-Connect checkbox to pop up the Note dialog.
2) Create a verification code.

3) Confirm the verification code.
4) Click Terms of Service and Privacy Policy to read the requirements.
5) Click OK to enable the Hik-Connect service.
6. Click OK to activate the device.
A The device is activated. window pops up when the password is set successfully.
7. Click Modify Netinfo to pop up the Modify Network Parameter interface.
Note: This function is only available on the Online Device area. You can change the device IP
address to the same subnet with your computer if you need to add the device to the software.
8. Change the device IP address to the same subnet with your computer by either modifying the
IP address manually or checking the checkbox of DHCP.
9. Input the password set in step 4 and click OK to complete the network settings.
17
3.1.2 Adding Online Devices
Purpose:
The active online devices in the same local subnet with the client software will be displayed on the
Online Device area. You can click the Refresh Every 60s button to refresh the information of the
online devices.
Note: You can click to hide the Online Device area.
Steps:
1. Select the devices to be added from the list.
Note: For the inactive device, you need to create the password for it before you can add the
device properly. For detailed steps, please refer to Chapter 3.1.1 Activating Device.
2. Click Add to Client to open the device adding dialog box.
3. Input the required information.
Nickname: Edit a name for the device as you want.
Address: Input the device s IP address. The IP address of the device is obtained automatically in
this adding mode.
Port: Input the device port No.. The default value is 8000.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password.
The password strength of the device can be checked by the software. For your privacy, we
18
strongly recommend changing the password to something of your own choosing (using a
minimum of 8 characters, including upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we recommend you reset your
password regularly, especially in the high security system, resetting the password monthly or
weekly can better protect your product.
4. Optionally, check the Export to Group checkbox to create a group by the device name.
You can import all the channels of the device to the corresponding group by default.
Note: iVMS-4200 also provides a method to add the offline devices.
1) Check the Add Offline Device checkbox.
2) Input the required information, including the device channel number and alarm input
number.
3) Click Add.
When the offline device comes online, the software will connect it automatically.
5. Click Add to add the device.
Add Multiple Online Devices

If you want to add multiple online devices to the client software, click and hold Ctrl key to select
multiple devices, and click Add to Client to open the device adding dialog box. In the pop-up
message box, enter the user name and password for the devices to be added.
Add All the Online Devices

If you want to add all the online devices to the client software, click Add All and click OK in the
pop-up message box. Then enter the user name and password for the devices to be added.
19
Modify Network Information

Select the device from the list, click Modify Netinfo, and then you can modify the network
information of the selected device.
Note: You should enter the admin password the device in the Password field of the pop-up window
to modify the parameters.
Reset Password
According to the different devices, the software provides five different methods for restoring the
default password or resetting the password.
Select the device from the list, click Reset Password.
Option 1:
If the window with Export button, password and confirm password field pops up, follow the steps
below to reset the password:
Steps:
1. Click Export to save the device file on your PC.
20
2. Send the file to our technical support.

For the following operations for resetting the password, contact our technical support.
minimum of 8 characters, including upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product. And we recommend
you reset your password regularly. Especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Option 2:
If the dialog with Export and Generate buttons, password and confirm password field pops up as
follows, follow the steps below to reset the password:
Steps:
1. Click Generate to pop up the QR Code dialog.
2. Click Download and select a saving path to save the QR code to your PC. You can also take a
photo of the QR code to save it to your phone.
3. Send the picture to our technical support.
For the following operations for resetting the password, contact our technical support.
21
Option 3:
If the window with safe mode selectable pops up as follows, you can perform the following steps to
reset the device password.
Steps:
1. Select the Safe Mode for resetting the device password.
If you select Key as the safe mode, refer to Option 2 above for detailed operations.
If you select Security Question as the safe mode, go to step 2.
If you select GUID File as the safe mode, go to step 3.
2. (Optional) If you select Security Question as the safe mode, input the answers of the three
security questions.
Note: You can set the security question when activating the device or in the remote
configuration. For details, refer to the User Manual of the device.
3. (Optional) If you select GUID File as the safe mode, in the Import File field, click to import
the GUID file.
Note: You can save the GUID file when activating the device. For details, refer to the User
Manual of the device.
4. Input new password in text fields of Password and Confirm Password.
5. Click OK to reset the password.
22
Option 4:
For some old version device, if the window with security code field pops up, input the security code,
and then you can restore the default password of the selected device.
Note: For getting the security code, contact our technical support.
The default password (12345) for the Admin account is for first-time log-in purposes only.
You must change this default password to better protect against security risks, such as the
unauthorized access by others to the product that may prevent the product from
functioning properly and/or lead to other undesirable consequences.
For your privacy, we strongly recommend changing the password to something of your
own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly. Especially in the high security
system, resetting the password monthly or weekly can better protect your product.
Option 5:
For some old version device, if the window with Import and Export buttons pops up, perform the
following steps to restore the default password:
1. Click Export to save the device file on your PC.
2. Send the file to our technical support.
3. For the following operations for resetting the password, contact our technical support.
The default password (12345) for the Admin account is for first-time log-in purposes only.
You must change this default password to better protect against security risks, such as the
unauthorized access by others to the product that may prevent the product from
functioning properly and/or lead to other undesirable consequences.
For your privacy, we strongly recommend changing the password to something of your
own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly. Especially in the high security
system, resetting the password monthly or weekly can better protect your product.
23
Synchronizing the Password

Purpose:
You can reset the password for the NVR or HDVR and use the new password as the password of the
connected network cameras and encoders.
Steps:
1. Select a device on the Online Device panel and click Reset Password.
2. Perform the password reset steps and check Use New Password as Camera Password
checkbox.
3.1.3 Adding Devices by IP or Domain Name
Steps:
1. Click Add to open the device adding dialog box.
2. Select IP/Domain as the adding mode.
Address: Input the device s IP address or domain name.
number.
3) Click Add.
24
3.1.4 Adding Devices by IP Segment
Steps:
2. Select IP Segment as the adding mode.
Start IP: Input a start IP address.
End IP: Input an end IP address in the same network segment with the start IP.
number.
3) Click Add.
5. Click Add.
25
You can add the device which the IP address is between the start IP and end IP to the device list.
3.1.5 Adding Devices by Hik-Connect Domain
Purpose:
You can add the devices to the client via Hik-Connect by inputting the device username and device
password.
Before you start: Add the devices to Hik-Connect account via iVMS-4200, iVMS-4500 Mobile Client,
or Hik-Connect first. For details about adding the devices to Hik-Connect account via iVMS-4200,
refer to Chapter 9.3 Device Management.
Steps:
1. Log into the Hik-Connect account. For details, refer to Chapter 9.2 Logging into Hik-Connect
Account.
2. Click Hikvision Device -> Add to open the device adding dialog.
3. Select Hik-Connect Domain as the adding mode.
The device(s) under the Hik-Connect account will display.
4. (Optional) Click Refresh to refresh the device list.
5. (Optional) Input keyword of the device name in the Search field to search the device(s).
6. Check the checkbox(es) to select the device(s).
7. Input the device user name and the device password in the User Name field and Password field
respectively.
26
Notes:
The device user name is admin by default.
The device password is created when you activate the device. For details, refer to Chapter
3.1.1 Activating Device.
8. (Optional) Check the Export to Group checkbox to create a group by the device name.
9. Click Add to add the device to the local client.
3.1.6 Adding Devices by EHome Account
Purpose:
You can add access control device connected via EHome protocol by inputting the EHome account.
Note: The function should be supported by the device. Or you cannot add device by EHome account.
Before you start: Set the network center parameter first. For details, refer to Network Center
Settings.
Steps:
2. Select EHome as the adding mode.
27

Account: Input the account name registered on EHome protocol.
number.
3) Click Add.
3.1.7 Adding Devices by Serial Port
Purpose:
You can add access control device connected via serial port.
Steps:
2. Select Serial Port as the adding mode.
28

Serial Port No.: Select the device s connected serial port No.
Baud Rate: Input the baud rate of the access control device.
DIP: Input the DIP address of the device.
number.
3) Click Add.
3.1.8 Adding Devices by IP Server
Steps:
2. Select IP Server as the adding mode.
29

Server Address: Input the IP address of the PC that installs the IP Server.
Device ID: Input the device ID registered on the IP Server.
number.
3) Click Add.
3.1.9 Adding Devices by HiDDNS
Note: The function should be supported by the device. Or you cannot add device by HiDDNS.
Steps:
30
2. Select HiDDNS as the adding mode.

Server Address: www.hik-online.com.
Device Domain Name: Input the device domain name registered on HiDDNS server.
number.
3) Click Add.
3.1.10 Importing Devices in Batch
Purpose:
The devices can be added to the software in batch by inputting the device information in the
31
pre-defined CSV file.

Steps:
2. Select Batch Import as the adding mode.
3. Click Export Template and save the pre-defined template (CSV file) on your PC.
4. Open the exported template file and input the required information of the devices to be added
on the corresponding column.
Adding Mode: You can input 0, 2, 3, 4, 5, or 6 which indicated different adding modes. 0
indicates that the device is added by IP address or domain name; 2 indicates that the device is
added via IP server; 3 indicates that the device is added via HiDDNS; 4 indicates that the device
is added via EHome protocol; 5 indicates that the device is added by serial port; 6 indicates that
the device is added via Hik-Connect Domain.
Address: Edit the address of the device. If you set 0 as the adding mode, you should input the IP
address or domain name of the device; if you set 2 as the adding mode, you should input the IP
address of the PC that installs the IP Server; if you set 3 as the adding mode, you should input
www.hik-online.com.
Device Information: If you set 0 as the adding mode, this field is not required; if you set 2 as the
adding mode, input the device ID registered on the IP Server; if you set 3 as the adding mode,
input the device domain name registered on HiDDNS server; if you set 4 as the adding mode,
input the EHome account; if you set 6 as the adding mode, input the device serial No.
32
Add Offline Device: You can input 1 to enable adding the offline device, and then the software
will automatically connect it when the offline device comes online. 0 indicates disabling this
function.
Export to Group: You can input 1 to create a group by the device name (nickname). All the
channels of the device will be imported to the corresponding group by default. 0 indicates
disabling this function.
Channel Number: If you set 1 for Add Offline Device, input the channel number of the device. If
you set 0 for Add Offline Device, this field is not required.
Alarm Input Number: If you set 1 for Add Offline Device, input the alarm input number of the
device. If you set 0 for Add Offline Device, this field is not required.
Serial Port No.: If you set 5 as the adding mode, input the serial port No. for the access control
device.
Baud Rate: If you set 5 as the adding mode, input the baud rate of the access control device.
DIP: If you set 5 as the adding mode, input the DIP address of the access control device.
Hik-Connect Account: If you set 6 as the adding mode, input the Hik-Connect account.
Hik-Connect Password: If you set 6 as the adding mode, input the Hik-Connect password.
5. Click and select the template file.
6. Click Add to import the devices.
3.1.11 QR Code of Encoding Devices
Purpose:
For encoding devices, the QR code of the devices can be generated. You can add the device to your
mobile client software by using the mobile client software to scan the QR code. For adding the
devices to your mobile client software, please refer to the User Manual of the mobile client
software.
Check the QR Code

On the device list, double-click a device, the information and QR code of the device will be displayed.
Or you can click to select a device and click QR Code to pop up the QR code window of the device.
You can also click and hold the Ctrl key to select multiple devices, and click QR Code to pop up the
QR code window of the devices. In this way, you can add multiple devices at the same time by
scanning the QR code.
33
3.1.12 Checking Device s Online Users
Purpose:
When any user accesses the device, the client can record and show the connection information,
including user name, user type, user s IP address, and login time.
Steps:
1. Click to select an added and online device.
2. Click Online Users to pop up the Online User dialog.
3. Check the information of the users that log into the device.
4. Click OK to close the dialog.
3.2 Group Management

Purpose:
The devices added should be organized into groups for a convenient management. You can get the
live view, play back the video files, and do some other operations of the device through the group.
Before you start:
34
Devices need to be added to the client software for group management.
Perform the following steps to enter the Group Management interface:

1. Open the Device Management page.
2. Click the Group tab to enter the Group Management interface.
3.2.1 Adding Group
Steps:
1. Click to open the Add Group dialog box.
2. Input a group name as you want.
3. Click OK to add the new group to the group list.
You can also check the checkbox Create Group by Device Name to create the new group by the
name of the selected device.
35
3.2.2 Importing Encoding Device to Group
Steps:
1. Click Import on Group Management interface, and then click the Encoding Channel tab to open
the Import Encoding Channel page.
Note: You can also select Alarm Input tab and import the alarm inputs to group.
2. Select the thumbnails/names of the cameras in the thumbnail/list view.
3. Select a group from the group list.
4. Click Import to import the selected cameras to the group.
You can also click Import All to import all the cameras to a selected group.
Notes:
You can also click the icon on the Import Encoding Channel page to add a new group.
Up to 256 cameras can be added to one group.
The following buttons are available on the Import Encoding Channel page:
List View View the camera in list view.
Thumbnail View View the camera in thumbnail view.
Refresh Refresh the latest information of added cameras.
Import Create a group named as device name-Encoding Channel
(Alarm Input) and import the device to group.
Collapse/Expand Collapse/Expand the thumbnails of cameras.
3.2.3 Modifying Group/Camera
Purpose:
You can edit the group/camera information, including the group/camera name, the stream type, etc.
Note: For modifying the camera(s) of Hik-Connect device, refer to Chapter 9.3.4 Modifying Camera.
Steps:
1. Select the group/camera from the group list on the Import page.
36
Move the mouse to the camera/group and click , or double-click the group/camera name to
open Modify Group/Camera dialog box.
2. Edit the group/camera information, including the group/camera name, the stream type, etc.
Video Stream: Select the stream for the live view of the camera as desired.
Playback Stream Type: Select the stream for the playback of the camera as desired.
Note: The Playback Stream Type field will display if the device supports dual-stream.
Rotate Type: Select the rotate type for the live view or playback of the camera as desired.
Protocol Type: Select the transmission protocol for the camera.
Stream Media Server: Configure to get stream of the camera via stream media server. You can
select and manage the available stream media server.
Copy to : Copy the configured parameters to other camera(s).
Refresh: Get a new captured picture for the live view of the camera.
Note: For video stream and protocol type, the new settings will take effect after you reopen the
live view of the camera.
3. Click OK to save the new settings.
You can also double click the encoding channel on the Resource list in the Group Management
interface after encoding channels encoded, or select the encoding channel and click to
open the Modify Camera dialog box.
Notes:
For the IP channel of NVR which supports decoding function:
After decoding and displaying on video wall, there will be a new channel in the Encoding
Channel Resources list whose protocol type is decoding on video wall.
After closing the corresponding roaming window, the new channel will be removed from the
Encoding Channel Resources list.
3.2.4 Removing Cameras from the Group
Steps:
1. Select the camera from the group list on the Import Encoding Channel page.
2. Move the mouse to the camera and click to remove the camera from the group.
You can also select the camera on the Group Management interface, and then click Delete to
remove the camera from the group.
3. Select the group from the group list on the Import Encoding Channel page, move the mouse to
37
the group and click and you can remove all the cameras from the group.
3.2.5 Deleting Group
Steps:
1. Select the group on the Group Management interface
2. Click Delete Group, or move the mouse to the group and click the icon , the selected group
and the resource under it will be deleted.
38
Chapter 4 Live View

Purpose:
For the surveillance task, you can view the live video of the added network cameras, video encoders
and video intercom device on the Main View page. And some basic operations are supported,
including picture capturing, manual recording, PTZ control, etc.
Before you start:
A camera group is required to be defined for live view.
You can set the rotate type if necessary in the Group Management. For details, refer to Chapter 3.2.3
Modifying Group/Camera.
Click the icon on the control panel,

or click View->Main View to open the Main View page.
Main View Page

1 View List
2 Camera List
3 PTZ Control Panel
4 Display Window of Live View
5 Live View Toolbar
Camera Status:
The camera is online and works properly.
The camera is in live view.
The camera is in recording status.
The camera is offline.
Notes:
If event (e.g., motion detection) is detected for the camera, the camera icon will display as
and the group icon will show as .
39
If the camera is offline, the client can still get the live video via the stream media server if the
stream media server is configured. The camera icon will display as . For configuring the
stream media server of the camera, refer to Chapter 11 Forwarding Video Stream through
Stream Media Server.
Live View Toolbar:
On the Main View page, the following toolbar buttons are available:
Save View Save the new settings for the current view.
Save View as Save the current view as another new view.
Stop Live View Stop the live view of all cameras.
Mute/Audio On Turn off/on the audio in live view
Resume/Pause
Click to resume/pause the auto-switch in live view.
Auto-switch
Show/Hide the configuration menu of auto-switch. Click again
Show/Hide the Menu
to hide.
Previous Go for live view of the previous page.
Next Go for live view of the next page.
Window Division Set the window division.
Display the live view in full-screen mode.
Press Esc, or you can move the mouse to the top of the screen
and click Quit Full Screen button to exit.
Full Screen You can click Lock button to lock the screen, and you can click
Unlock and input the client admin password to unlock it.
For full screen auto-switch, you can click Previous or Next
button to view the previous or next camera.
Right-click on the display window in live view to open the Live View Management Menu:
The following buttons are available on the right-click Live View Management Menu:
40
Stop Live View Stop the live view in the display window.
Capture Capture the picture in the live view process.
Print Captured Picture: Capture a picture and print it.
Send Email: Capture the current picture and then send an
Email notification to one or more receivers. The captured
Other Capture Modes
picture can be attached.
Custom Capture: Capture the current picture. You can edit its
name and then save it.
Start/Stop the manual recording. The video file is stored in the
Start/Stop Recording
PC.
Enable PTZ control function on the display window. Click again
Open PTZ Control
to disable the function.
Enable the digital zoom function. Click again to disable the
Open Digital Zoom
function.
Enable the auto-tracking function of the speed dome. Then
the speed dome will track the object appearing on the video
Enable Auto-tracking
automatically. This button is only available for the speed dome
that supports the auto-tracking function.
Switch to Instant Playback Switch to instant playback mode.
For thermal camera, click to display the fire source region,
display the maximum temperature information, locate the
Fire Source Information
maximum temperature region, or display the fire source
target.
Click to start/stop the two-way audio with the device in live
Start/Stop Two-way Audio
view.
Click to start/stop the two-way audio with the camera in live
Start/Stop IP Two-way
view. This button is only available for the camera that supports
Audio
the IP two-way audio function.
Enable/Disable Audio Click to enable/disable the audio in live view.
Display the status of the camera in live view, including the
Camera Status
recording status, signal status, connection number, etc.
Open the remote configuration page of the camera in live
Remote Configuration
view.
Enter the VCA configuration interface of the device if it is VCA
VCA Configuration
device.
Sync the camera in live view with the PC running the client
Synchronization
software.
Show/Hide Temperature For thermal camera, click to show or hide the temperature on
Information the live view image.
Enter the fisheye expansion mode. Only available when the
Fisheye Expansion device is fisheye camera. For details, please refer to Chapter
4.7 Live View in Fisheye Mode.
Start/Stop Master-slave Click to start/stop locating or tracking the target according to
Linkage your demand. Only available when the device is fisheye
41
camera or box/bullet camera. For details, please refer to

Chapter 4.8 Starting Master-slave Linkage .
Set the camera s linked access control point (door) and you
Link to Access Control
can control the door status during live view. For details, refer
Point
to Chapter 15.10 Controlling Door during Live View.
Click to remote unlock the door if the device is door station,
Unlock
outer door station or door station (V series).
Display the live view in full screen mode. Click the icon again
Full Screen
to exit.
4.1 Starting and Stopping Live View

Note: For Hik-Connect device, if the live view or video file(s) of its camera(s) is encrypted, you should
input the verification code. For details, refer to Chapter 9.3.4 Modifying Camera.
Starting Live View for One Camera

Steps:
1. Open the Main View page.
2. Optionally, click the icon in live view toolbar to select the window division mode for live
view.
3. Click-and-drag the camera to the display window,
or double-click the camera name after selecting the display window to start the live view.
Note: You can click-and-drag the video of the camera in live view to another display window if
needed.
Starting Live View for Camera Group

Steps:
2. Click-and-drag the group to the display window,
or double-click the group name to start the live view.
Note: The display window number is self-adaptive to the camera number of the group.
Starting Live View in Default View Mode

Purpose:
The video of the added cameras can be displayed in different view modes. 4 frequently-used default
view modes are selectable: 1-Screen, 4-Screen, 9-Screen and 16-Screen.
Steps:
2. In the View panel, click the icon to expand the default view list.
3. Click to select the default view mode and the video of the added cameras will be displayed in a
sequence in the selected view.
Note: Click , and you can save the default view as a custom view.
Move the mouse to the view and the following icons are available:
42
Start Instant Playback Start the instant playback of the view.

Start switching automatically of the view. For details,
Start Auto-switch
please refer to Chapter 4.2 Auto-switch in Live View.
Starting Live View in Custom View Mode

Purpose:
The view mode can also be customized for the video live view.
Steps:
2. In the View panel, click the icon to expand the custom view list. If there is custom view
available, you can click to start live view of the custom view.
3. Click to create a new view.
4. Input the view name and click Add. The new view is of 4-Screen mode by default.
5. Optionally, click the icon in live view toolbar and select the screen layout mode for the new
view.
6. Click-and-drag the camera/group to the display window,
or double-click the camera/group name in custom view mode to start the live view.
7. Click the icon to save the new view. You can also click to save the view as another
custom view.
Move the mouse to the custom view and the following icons are available:
Edit View Name Edit the name of the custom view.
Delete View Delete the custom view.
Start Instant Playback Start the instant playback of the view.
43
Stopping the Live View

Steps:
1. Select the display window.
2. Click the icon that appears in the upper-right corner when the mouse pointer is over the
display window,
or click Stop Live View on the right-click menu to stop the live view of the display window.
You can also click the button in live view toolbar to stop all the live view.
4.2 Auto-switch in Live View
Camera Auto-switch
Purpose:
The video stream of the cameras from the same group will switch automatically in a selected display
window in camera auto-switch.
Steps:
2. Select a display window for camera auto-switch.
3. Click the icon in the toolbar and select or customize the switching interval.
4. Select a group and click the icon on the group node.
5. You can click the icon / to pause/resume the camera auto-switch.
6. You can click or to view the live video of previous or next camera.
Single View Auto-switch

Purpose:
The video of all the cameras on the camera list will switch automatically in a selected default view in
single view auto-switch.
Steps:
2. Click the icon in the toolbar and select or customize the switching interval.
3. Select a default view and click the icon on the selected view node.
44
4. You can click the icon / to pause/resume the single view auto-switch.
Multi-view Auto-switch
Purpose:
The custom views will switch automatically in multi-view auto-switch. The custom views need to be
added before proceeding.
Steps:
2. Click the icon in the toolbar and select the switching interval.
3. Click the icon on the custom view node.
4. You can click the icon / to pause/resume the multi-view auto-switch.
4.3 PTZ Control in Live View

The software provides PTZ control for cameras with pan/tilt/zoom functionality. You can set the
preset, patrol and pattern for the cameras on the PTZ Control panel. And you can also open window
PTZ control for the operations of PTZ cameras.
Click the icon to expand the PTZ Control panel.
The following buttons are available on the PTZ Control panel:

Zoom
Focus
Iris
3D Positioning
Auxiliary Focus
Lens Initialization
Light
Wiper
Manual Tracking
Menu
One-touch Patrol
45
One-touch Park
Notes:
For the analog speed dome, you can click to display its local menu. For detailed operation
of the menu, please refer to the User Manual of the speed dome.
For the speed dome with auto-tracking function, you can enable the auto-tracking (via
right-click menu) for it and then click to manually track the target by clicking on the video.
For the one-touch patrol function, you can click and the speed dome will start patrol from
the predefined preset No.1 to preset No.32 in order after a period of inactivity (park time). For
setting the park time, please refer to the User Manual of the speed dome.
For the speed dome with one-touch park function, you can enable the one-touch park by
clicking and the speed dome will save the current view to the preset No.32. The device
starts to park at preset No. 32 automatically after a period of inactivity (park time). For setting
the parking time, please refer to the User Manual of the speed dome.
Hik-Connect device only supports the PTZ movement to the direction of upside, downside, left,
and right.
Configuring Preset
A preset is a predefined image position which contains information of pan, tilt, focus and other
parameters.
Perform the following steps to add a preset:
1. Click the Preset button to enter the PTZ preset configuration panel.
2. Click the direction buttons and other buttons on the PTZ control panel to steer the camera to
the desired view.
3. Select a PTZ preset number from the preset list and click .
4. Input the name of the preset in the pop-up dialog box.
To call a configured preset, double-click the preset, or select the preset and click the icon .
You also perform the following steps to call the preset.
Steps:
1. Click to select a live view window.
2. For preset 1 to 9, click the corresponding number key (e.g., 4) to call the preset.
For other presets, click [ , number keys (e.g., 124), and ] to call the preset.
To modify a configured preset, select the preset from the list and click the icon .
To delete a configured preset, select the preset from the list and click the icon .
46
Configuring Pattern
A pattern is a memorized, repeating series of pan, tilt, zoom, and preset functions.
Perform the following steps to add a pattern:
1. Click the Pattern button to enter the PTZ pattern configuration panel.
2. Click to start recording of this pattern path.
3. Use the direction buttons to control the PTZ movement.
4. Click to stop and save the pattern recording.
5. Click the icon to call the pattern. To stop calling the pattern, click .
6. (Optional) You can click to delete the selected pattern.
Click to delete all the patterns.
Configuring Patrol
A patrol is a scanning track specified by a group of user-defined presets, with the scanning speed
between two presets and the dwell time at the preset separately programmable.
Before you start:
Two or more presets for one PTZ camera need to be added.
Perform the following steps to add and call a patrol:
1. Click the Patrol button to enter the PTZ patrol configuration panel.
2. Select a track number from the drop-down list.
47
3. Click to add a preset, and set the dwell time and patrol speed for the preset.
4. Repeat the above operation to add other presets to the patrol.
5. Optionally, you can click or to edit or delete a preset in the patrol path.
6. Click the icon to call the patrol. To stop calling the patrol, click .
Note: The preset dwell time can be set to 1 to 30 sec, and the patrol speed can be set to level 1 to
40.
4.4 Manual Recording and Capture

Toolbar in Each Live View Display Window:
In each live view display window, the following toolbar buttons are available:
Capture the picture in the live view process. The capture picture
Capture
is stored in the PC.
Start/Stop Recording Start/Stop manual recording. The video file is stored in the PC.
Start/Stop PTZ mode for speed dome. Click and drag in the view
Open/Close PTZ Control
to perform the PTZ control.
Start/Stop Two-way
Click to start/stop the two-way audio with the device in live view.
Audio
Open/Close Digital Enable the digital zoom function. Click again to disable the
Zoom function.
Switch to Instant
Switch to the instant playback mode.
Playback
Remote Configuration Open the remote configuration page of the camera in live view.
Note: You can customize the icons and the icons order as desired in System Configuration. For
details, refer to Chapter 20.5 Toolbar Settings.
Manual Recording in Live View

Purpose:
Manual Recording function allows you to record the live video on the Main View page manually and
the video files are stored in the local PC.
48
Steps:
1. Move the mouse pointer to the display window in live view to show the toolbar.
2. Click in the toolbar of the display window or on the right-click Live View Management
Menu to start the manual recording. The icon turns to .
3. Click the icon to stop the manual recording.
A prompt box with the saving path of the video files you just recorded will pop up if all the
operations succeed.
Notes:
During the manual recording, an indicator appears in the upper-right corner of the display
window.
The saving path of video files can be set on the System Configuration interface. For details, refer
to Chapter 20.4 File Saving Path Settings.
For Hik-Connect device, the manual recording is not supported during live view.
Viewing Local Video Files

Steps:
1. Click File->Open Video File to open the Video Files page.
2. Select the camera to be searched from the Camera Group list.
3. Click the icon to specify the start time and end time for the search.
4. Click Search. The video files recorded between the start time and end time will be displayed.
Select the video file, and click Delete. You can delete the video file.
Select the video file, and click Send Email. You can send an Email notification with the selected
video file attached.
Select the video file, and click Save as. You can save a new copy of the video file.
Note: To send an Email notification, the Email settings need to be configured before proceeding. For
details, refer to Chapter 20.8 Email Settings.
Double-click the video file and the video file can be played back locally.
49
The following buttons are available on the local playback page:

CIF/4CIF Display the video in cif/4cif resolution.
Full Screen Display the local playback page in full screen mode.
Close Close the local playback page of the video files.
Pause/Play Pause/Start the playback of the video files.
Stop Stop the playback of the video files.
Speed Set the playback speed.
Single Frame Play back the video files frame by frame.
Digital Zoom Enable the digital zoom function. Click again to disable.
Enable/Disable Audio Click to enable/disable the audio in the local playback.
Capture Capture the picture in the playback process.
Capturing Picture in Live View

Steps:
1. Move the mouse pointer to the display window in live view to show the toolbar.
2. Click the icon in the toolbar of the display window or on the right-click Live View
Management Menu.
A small window of the captured picture will be displayed to notify whether the capturing
operation is done or not.
Note: The saving path of the captured pictures can be set on the System Configuration interface. For
details, refer to Chapter 20.4 File Saving Path Settings.
Viewing Captured Pictures

The pictures captured in live view are stored in the PC running the software. You can view the
captured pictures if needed.
Steps:
1. Click File->Open Image File to open the Captured Images page.
2. Select the camera to be searched from the Camera Group list.
50
3. Click the icon to specify the start time and end time for the search.
4. Click Search. The pictures captured between the start time and end time will be displayed.
5. Double-click the captured picture to enlarge it for a better view.
Select the captured picture, and click Print. You can print the selected picture.
Select the captured picture, and click Delete. You can delete the selected picture.
Select the captured picture, and click Send Email. You can send an Email notification with the
selected picture attached.
Select the captured picture, and click Save as. You can save a new copy of the selected picture.
4.5 Instant Playback

Purpose:
The video files can be played back instantly on the Main View page. Instant playback shows a piece
of the video which was remarkable, or which was unclear on the first sight. Thus, you can get an
immediate review if needed.
Before you start:
The video files need to be recorded on the storage devices, such as the SD/SDHC cards and HDDs on
the DVRs, NVRs, Network Cameras, etc., or on the storage servers.
Steps:
1. Start the live view and move the mouse to the display window to show the toolbar. You can also
move the mouse to default view or custom view and click to enable the instant playback of
the selected view.
2. Click the icon in the toolbar and a list of time periods pops up.
30s, 1 min, 3 min, 5 min, 8 min, and 10 min are selectable.
3. Select a time period to start the instant playback.
Example: If the current time of the live view is 09:30:00, and you select 3 min, then the instant
playback will start from 09:27:00.
4. Click the icon again to stop the instant playback and go back for the live view.
Note: During the instant playback, an indicator appears in the upper-right corner of the display
window.
51
On the instant playback page, the following toolbar buttons are available:
Reverse Playback Play back the video file reversely.
Pause/Start Playback Pause/Start the playback of the video files.
Stop Playback Stop the playback of all cameras.
Slow Forward/Fast Forward Decrease/Increase the play speed of the playback.
Single Frame (Reverse) Play back the video files frame by frame (reversely).
Right-click on the display window to open the Instant Playback Management Menu:
The following buttons are available on the right-click Instant Playback Management Menu:
Pause/Play Pause/Start the instant playback in the display window.
Stop Stop the instant playback and return to the live view mode.
Fast Forward/Slow
Increase/Decrease the play speed of the instant playback.
Forward
Single Frame (Reverse) Play back the video file frame by frame (reversely).
Open Digital Zoom
function.
Capture Capture the picture in the instant playback process.
Send Email: Capture the current picture and then send an Email
Other Capture Modes notification to one or more receivers. The captured picture can be
attached.
52

Start/Stop Recording Start/Stop clipping the video files.
Enable/Disable Audio Click to turn on/off the audio in instant playback.
Switch to Live View Switch to live view mode.
Full Screen Display the instant playback in full screen mode. Click again to exit.
4.6 Custom Window Division

Purpose:
The client software provides multiple kinds of pre-defined window division. You can also set custom
window division as desired.
Steps:
1. Click on the live view toolbar and select to pop up the custom window division dialog
box.
2. Click Add to open the custom window division adding dialog box.
Note: Up to 5 custom window divisions can be added.
3. Set a name for the new window division as desired and click OK to save the settings.
4. You can edit the name, window division (3x3, 4x4, 5x5) for it.
5. Click-and-drag you mouse to select the adjacent windows, and click Joint to joint them as a
whole window. You can also click Cancel to cancel the jointing.
53
6. Click Save to confirm the settings. Click to back to the Main View page. Then you can click
and select the custom window division for playing live video.
Notes:
You can also enter the Remote Playback page and perform the steps above to configure
the custom window division.
For remote playback, up to 16 windows can be played back at the same time. The custom
window division with more than 16 windows is invalid for playback.
4.7 Live View in Fisheye Mode

Purpose:
The live video of the camera can be played in fisheye expansion mode.
Steps:
1. Start the live view (refer to Chapter 4.1 Starting and Stopping Live View).
2. Right-click on the video and select Fisheye Expansion to enter the Fisheye Expansion window.
3. Select the mounting type of the fisheye camera according to the actual mounting position.
4. You can select the expanding mode for live view as desired.
Note: For some devices, you can select the mounting type of the device and the related
expanding mode will be listed.
54
Fisheye: In the Fisheye view mode, the whole wide-angle view of the camera is displayed.
This view mode is called Fisheye because it
The lens produces curvilinear images of a large area, while distorting the perspective and
angles of objects in the image.
o o
Panorama/Dual-180 Panorama/360 Panorama: In the Panorama view mode, the
distorted fisheye image is transformed to normal perspective image by some calibration
methods.
PTZ: The PTZ view is the close-up view of some defined area in the Fisheye view or
Panorama view, and it supports the electronic PTZ function, which is also called e-PTZ.
Note: Each PTZ view is marked on the Fisheye view and Panorama view with a specific
navigation box. You can drag the navigation box on the Fisheye view or Panorama view to
adjust the PTZ view, or drag the PTZ view to adjust the view to the desired angle.
5. You can right click on the window and select Capture to capture the picture in the live view
process. The capture picture is stored in the PC.
6. Right-click on a playing window and you can switch the selected window to full-screen mode
Press ESC key on the keyboard or right-click on the window and select Quit Full Screen to exit the
full-screen mode.
PTZ Control
In PTZ mode, you can use the PTZ control to adjust the PTZ window.
Note: The PTZ panel varies according to different devices.
Select a PTZ window, and click one of the direction buttons to adjust the view angle.
Note: Click-and-drag the No. label in the fisheye or panorama window will change the view
angle of the PTZ window as well.
Select a PTZ window, and click to start auto-scan, and click it again to stop auto-scan.
: Drag the slider to adjust the speed for PTZ movement.
: Zoom in or zoom out the selected PTZ window by clicking or . Or you can
scroll the mouse wheel to zoom in or zoom out.
Preset
Note: The preset is only supported by specific fisheye camera.
A preset is a user-defined monitor position/point. You can simply call the preset No. to change the
55
monitor scene to the defined position. Please follow the steps below to configure the preset.
Steps:
1. Click Preset tab to enter the preset configuration interface.
2. Select a PTZ window, and adjust the scene to the place you want to mark as a preset.
3. Click , input the preset name, and click OK to save a preset.
4. (Optional) Click to call the configured preset.

5. (Optional) Click to delete the configured preset.
Patrol
Note: The preset is only supported by specific fisheye camera.
A patrol is a scanning track specified by a group of user-defined presets, with the scanning speed
between two presets and the dwell time at the preset separately programmable. Please follow the
steps below to configure the patrol.
Note:
At least 2 presets have to be configured before you configure the patrol.
Steps:
1. Click patrol tab to enter the patrol configuration interface.
2. Select a path No. from the drop-down list.
3. Click to add the configured presets, and set the dwell time and patrol speed for the preset.
4. Repeat the above operation to add other presets to the patrol.
5. Click to start the patrol, and click to stop patrol.

6. Optionally, you can click or to edit or delete a preset in the patrol path.
Notes:
Up to 256 presets can be configured.
Up to 32 patrols can be set.
The dwell time ranges from 1 to 120s.
The patrol speed ranges from 1 to 40.
56
4.8 Starting Master-slave Linkage

Purpose:
The box/bullet camera support master-slave linkage function so as to locate or tracking the target
according to your demand.
Notes:
This function in only supported by the specific fisheye or box/bullet camera.
A speed dome with the auto-tracking function is required to be installed near the camera.
Steps:
1. Enter Remote Configuration -> VCA Config -> Rule -> Rule Settings.
2. Select Camera No.1, and click of Rule List to add rule.
3. Select Intrusion as Event Type, and then click to draw the zone of intrusion rule and click
Save to save the settings.
4. Login the speed dome.

1) In the Remote Configuration interface, select Advanced Configuration->Master-Slave
Tracking to show the login interface.
2) Click Login button to pop up the speed dome login dialog box.
3) Input the required information.
57
5. Click PTZ, and use the direction arrows to adjust the speed dome to a horizontal position.
6. Click to select the calibration tab page.
For Auto Calibrating:

1) Select Auto Calibrating from the calibration list.
2) Perform the calibration operation.
Move and zoom in/out the speed dome to make sure the live views of dome and camera is
mostly the same.
3) Click Save to save the calibration settings.
For Manual Calibrating:
1) Select Manual Calibrating from the calibration list.
2) Select No. 1 from the list and click , a blue cross appears in the center of the live view
page, and the digital zoom view of the selected site appears on the right.
3) Select No. 2 to No. 4, and repeat the step above to add the manual calibration sites.
4) Perform the calibration operation.

Adjust the distances between the four calibration sites evenly in the live view page.
Select calibration site No. 1 and the digital zoom view of site No. 1 appears on the right.
Move and zoom in/out the speed dome to make sure the live views of dome and the digital
58
zoom view of selected site is mostly the same.

Click to save the current site position information.
Select No. 2 to No. 4, and repeat the steps above to save the site position information.
Click Save to save the calibration settings.
7. Right-click on the live view window of camera to show the menu and click Enable Master-slave
Tracking.
8. When configured VCA rule is triggered by target, the speed dome performs the automatic
master-slave tracking and the target frame turns from green into red.
4.9 Other Functions in Live View

There are some other functions supported in the live view, including digital zoom, two-way audio,
camera status and synchronization.
Auxiliary Screen Preview

The live video can be displayed on different auxiliary screens for the convenient preview of multiple
monitoring scenes. Up to 3 auxiliary screens are supported.
Digital Zoom
Use the left key of mouse to drag a rectangle area in the lower-right/upper-left direction, and then
the rectangle area will zoom in/out. You can also use the mouse wheel for zooming in or restoring of
the video in digital zoom mode.
Channel-zero
For the channel-zero of the device, you can hold the Ctrl key and double-click to display the specific
channel. Hold the Ctrl key and double-click again to restore.
Two-way Audio
Two-way audio function enables the voice talk of the camera. You can get not only the live video but
also the real-time audio from the camera. If the device has multiple two-way audio channels, you can
select the channel to start two-way audio.
The two-way audio can be used for only one camera at one time.
Note: Hik-Connect device doesn t support selecting channel during two-way audio.
Camera Status
The camera status, such as recording status, signal status, connection number, etc., can be detected
and displayed for check. The status information refreshes every 10 seconds.
Synchronization
The synchronization function provides a way to synchronize the device clock with the PC which runs
the client software.
59
Chapter 5 Remote Storage Schedule

Settings and Playback
When the video storage devices are the HDDs, Net HDDs, SD/SDHC cards on the local device, or the
remote storage server connected, you can set the recording schedule or capture schedule for the
cameras for the continuous, alarm triggered or command triggered recording or capture. And the
video files can be searched for the remote playback.
5.1 Remote Storage

Purpose:
The video files and captured pictures can be stored on the HDDs, Net HDDs, SD/SDHC cards on the
local device, or the storage server connected.

or click Tool->Storage Schedule to open the Storage Schedule page.
5.1.1 Storing on DVR, NVR, or Network Camera
Purpose:
Some local devices, including the DVRs, NVRs, and Network Cameras, provide storage devices such
as the HDDs, Net HDDs and SD/SDHC cards for video files. You can set a recording schedule or
capture schedule for the channels of the local devices.
Note: The pictures captured through the capture schedule are stored on the local device and can be
searched on the remote configuration page of the device.
Before you start:
60
The newly installed storage devices need to be formatted. Go to the remote configuration page of
the device, click Storage->General, select the HDD or SD/SDHC card, and click Format to initialize the
selected storage device.
Steps:
1. Open the Recording Schedule page.
2. Select the camera in the Camera Group list.
3. Check the checkbox Recording Schedule/Capture Schedule under Storage of Encoding Server to
enable device local recording or capture.
4. Select the record or capture schedule template from the drop-down list.
All-day Template: for all-day continuous recording.
Weekday Template: for working-hours continuous recording from 8:00 AM to 8:00 PM.
Event Template: for the event triggered recording.
Template 01 to 08: fixed templates for specific schedules. You can edit the templates if needed.
Custom: can be customized as desired.
If you need to edit or customize the template, refer to Configuring Recording Schedule Template.
5. Click Advanced Settings to set the recording parameters. For details, refer to Table 5.1 Advanced
Recording Settings and Table 5.2 Advanced Capture Settings.
Note: The displayed items vary with the devices.
6. Optionally, click Copy to to copy the recording schedule settings to other channels.
7. Click Save to save the settings.
Parameters Descriptions
Normally used for the event triggered record, when you want to record before
Pre-record
the event happens
Post-record After the event finished, the video can also be recorded for a certain time.
The time for keeping the video files in the storage device, once exceeded, the
Keep Record Files for
files will be deleted. The files will be saved permanently if the value is set as 0.
61
Redundant Record Save the video files not only in the R/W HDD but also in the redundant HDD.
Record Audio Record the video files with audio or not.
Select the stream type for the recording.
Note: For specific type of devices, you can select Dual-Stream for recording
Video Stream both main stream and sub-stream of the camera. In this mode, you can switch
the stream type during remote playback. Refer to Chapter 5.2.1 Normal
Playback for stream switch during playback.
Resolution Select the resolution for the continuous or event captured pictures.
Picture Quality Set the quality for the continuous or event captured pictures.
Select the interval which refers to the time period between two capturing
Interval
actions.
Captured Picture
Set the picture number for event capture.
Number
Configuring Recording Schedule Template

Perform the following steps to configure the recording schedule template:
If Template 01 to 08 is selected from the drop-down list, start from step 1;
If Custom is selected from the drop-down list, start from step 2.
1. Click Edit to enter the Templates Management interface. Select the template to be set and you
can edit the template name.
2. Set the time schedule for the selected template.
refers to normal recording. The schedule time bar is marked with .
refers to the recording for the event. The schedule time bar is marked with
.
refers to the recording triggered by command. The schedule time bar is marked
with .
Note: Record triggered by command is only available for the ATM transactions when the ATM
DVR is added to iVMS-4200.
When the cursor turns to , you can set the time period.
When the cursor turns to , you can move the selected time bar you just edited. You can also
edit the displayed time point to set the accurate time period.
When the cursor turns to , you can lengthen or shorten the selected time bar.
3. Optionally, you can select the schedule time bar,
and then click the icon to delete the selected time bar,
or click the icon to delete all the time bars,
or click the icon to copy the time bar settings to the other dates.
You can click Save as Schedule Template on the Custom Schedule interface, and then the
custom template can be saved as template 01 to 08.
Note: Up to 8 time periods can be set for each day in the recording schedule.
62
5.1.2 Storing on Storage Device
Purpose:
You can add storage device to the client for storing the video files and pictures of the added encoding
devices and you can search the files for remote playback. The storage device can be storage server,
CVR (Center Video Recorder) or other NVR. Here we take the settings of storage server as an
example.
Before you start:
The storage server application software needs to be installed and it is packed in the iVMS-4200
software package. When installing the iVMS-4200, check the checkbox Storage Server to enable the
installation of storage server.
Resetting Password for Storage Server
If it is the first running the iVMS-4200 Storage Server, you are required to set a password for the
63
storage server.
Steps:
1. Click the shortcut icon on the desktop to run the storage server.
Notes:
You can also record the video files on the storage server installed on other PC.
If the storage server port (value: 8000) is occupied by other service, a dialog box will pop
up. You should change the port No. to other value to ensure the proper running of the
storage server.
2. The following dialog pops up.
3. Input the new password and confirm password.
4. Click OK to change the password.
After changing the password, the storage server will run automatically.
Adding Storage Server to iVMS-4200
Steps:
1. Open the Device Management page of iVMS-4200 and click Device tab.
64
2. Click Hikvision Device to display the Hikvision Device list.

For adding Storage Server, refer to Chapter 3.1 Adding Device.
Formatting HDDs
The HDDs of the storage server need to be formatted for the video file and picture storage.
Steps:
1. Select the added storage server from the list and click Remote Configuration.
2. Click Storage->General, to enter the HDD Formatting interface.
3. Select the HDD from the list and click Format. You can check the formatting process from the
process bar and the status of the formatted HDD changes from Unformatted to Normal Status.
Note: Formatting the HDDs is to pre-allocate the disk space for storage and the original data of the
formatted HDDs will not be deleted.
65
Configuring CVR on Web Client
Purpose:
Client provides entry to the CVR configuration web client for convenient usage. You can configure the
CVR parameters on the web client.
Select the added CVR from the list and click Configuration on Device to go to the CVR configuration
web client.
Note: For details about configuring CVR parameters on the web client, refer to the User Manual of
the device.
Configuring Storage Schedule
Before you start:

The storage server needs to be added to the client software and the HDDs need to be formatted for
the video file storage.
Steps:
1. Open the Storage Schedule page.
2. Select the camera from the Camera Group list.
3. Select the storage server from the Storage Server drop-down list.
Note: You can click Storage Server Management to add, edit or delete the storage server.
4. Check the checkbox Recording Schedule to enable storing the video files.
You can also check the checkbox Picture Storage to store the alarm pictures of the camera when
event occurs.
For the network cameras with the function of heat map or people counting, the Additional
Information Storage checkbox is available. You can click VCA Config to set the VCA rule for the
camera, and check the Additional Information Storage checkbox and the heat map, people
counting data and road traffic data will be uploaded to the storage server. Please refer to
Chapter 21.1 Heat Map, Chapter 21.2 People Counting Statistics and Chapter 21.4 Road Traffic
for checking the data.
Note: For detailed configuration about setting the VCA rule, please refer to the User Manual of
the camera.
66
5. Select the schedule template for recording from the drop-down list.
If you need to edit or customize the template, refer to Configuring Recording Schedule Template.
6. Click Advanced Settings to set the pre-record time, post-record time, video stream, and other
parameters for recording.
Note: The iVMS-4200 Storage Server only supports main-stream.
7. Click Set Quota to enter the HDD management interface of the storage server. You can set the
corresponding quota ratio for record, picture and additional information.
Example: If you set the record quota as 60%, then the 60% of the storage space can be used for
storing the video files.
Note: The storage server supports storage of line crossing detection alarm, intrusion detection alarm,
region entrance detection alarm, region exiting detection alarm, fast moving detection alarm, people
gathering detection alarm, loitering detection alarm, parking detection alarm, object removal
detection alarm, and unattended baggage detection alarm recording. For details, refer to Chapter 6
Event Management.
5.2 Remote Playback

Purpose:
The video files stored on the local device or the storage server can be searched by camera or
triggering event, and then can be played back remotely.
Before you start:
You can set to play back the video files stored in the local device, in the storage server, or both in the
storage server and local device. For details, refer to Chapter 20.2 Live View and Playback Settings.
Optionally, you can set the cameras rotate direction for playback in Group Management. Refer to
Chapter 3.2.3 Modifying Group/Camera.

or click View->Remote Playback to open the Remote Playback page.
67
Remote Playback Page

1 Camera List
2 Display Window of Playback
3 Playback Control Buttons
4 Timeline
5 Calendars
6 Search Condition
5.2.1 Normal Playback
Purpose:
The video files can be searched by camera or group name for the Normal Playback.
Note: For Hik-Connect device, it only supports normal playback.
Switching Video Stream for Playback

Purpose:
Optionally, you can switch between main stream and sub-stream for playback.
Before you start:
Set the video stream for recording as Dual-Stream, refer to step 5 of Chapter 5.1.1 Storing on DVR,
NVR, or Network Camera for details.
Note: This function should be support by the device.
Steps:
1. Enter Group Management interface and open the Modify Camera dialog (refer to Chapter 3.2.3
Modifying Group/Camera).
2. Set the video stream of the camera to main stream or sub-stream.
Searching Video Files for Normal Playback

Steps:
1. Open the Remote Playback page.
2. Click the calendars icon to activate the calendars dialog.
68
Select the start and end date and set the accurate time.
Click OK to save the searching period.
3. Click-and-drag the camera or group to the display window,
or double-click the camera or group to start the playback.
4. The found video files of the selected group or camera will be displayed on the right of the
interface in chronological order. You can filter the results through the Filter text field.
The first video file will be played back automatically by default.
Notes:
Up to 16 cameras can be searched simultaneously.
In the calendar, the date which has scheduled records will be marked with and the date
with event records will be marked with .
Playing Back Video Files

After searching the video files for the normal playback, you can play back the video files in the
following two ways:
Playback by File List
Select the video file from the search result list, and then click the icon on the video file,
or double-click the video file to play the video on the display window of playback.
You can also select a display window and click the icon in the toolbar to play back the
corresponding video file.
Playback by Timeline
The timeline indicates the time duration for the video file, and the video files of different types
are color coded. Click on the timeline to play back the video of the specific time.
You can click or to scale up or scale down the timeline bar.
You can drag the timeline bar to go to the previous or the next time period.
You can use the mouse wheel to zoom in or zoom out on the timeline.
69
Normal Playback Toolbar:
On the Normal Playback page, the following toolbar buttons are available:
Play back the video file reversely.
Reverse Playback
Note: The Hik-Connect device doesn t support this function.
Pause/Start
Pause/Start the playback of the video files.
Playback
Play back the video files frame by frame reversely. You can also
Single Frame
scroll down the mouse wheel to play the video file frame by
(Reverse)
frame reversely.
Play back the video files frame by frame. You can also scroll
Single Frame
down the mouse wheel to play the video file frame by frame.
Slow Forward/Fast Decrease/Increase the play speed of the playback.
Forward Note: The Hik-Connect device doesn t support this function.
Volume Click to turn on/off the audio and adjust the audio volume.
Search the recordings triggered by event, such as motion
Event Playback
detection, video loss or video tampering.
ATM Playback Search the recordings of ATM devices.
POS Playback Search the recordings which contain POS information.
Set the VCA rule to the searched video files that VCA event
VCA Playback
occurs, including motion detection, Intrusion and Line Crossing.
Download for
Download video files of multiple cameras at the same time.
Multiple Cameras
Window Division Set the window division.
70
Display the video playback in full-screen mode. Press ESC to

Full Screen
exit.
Async/Sync
Click to play back the video files synchronously/asynchronously.
Playback
Download the video files of the camera and the video files are
Download stored in the PC. You can select to download by file, by date, or
by tag.
Add default tag for the video file to mark the important video
point. You can edit the tag or go to the tag position via the
Tag
right-click menu.
Note: The Hik-Connect device doesn t support this function.
Display the record types as desired. E.g., you can select to
Filter
display only the event recording.
Accurate Positioning Set the accurate time point to play back the video file.
Date The day that has video files will be marked with .
Right-click on the display window in playback to open the Playback Management Menu:
The following items are available on the right-click Playback Management Menu:
/ Pause/Start Pause/Start the playback.
Stop Stop the playback.
Fast Forward Play back the video file at a faster speed.
Slow Forward Play back the video file at a slower speed.
/ Single Frame (Reverse) Play back the video file frame by frame (reversely).
Open Digital Zoom
function.
Show/Hide Temperature For thermal camera, click to show or hide the temperature on
Information the live view image.
Tag Control Add default (default tag name TAG) or custom tag (customized
71
tag name) for the video file to mark the important video point.
You can also edit the tag or go to the tag position conveniently.
Capture Capture the picture in the playback process.
Send Email: Capture the current picture and then send an Email
notification to one or more receivers. The captured picture can
Other Capture Modes
be attached.
Start/Stop the manual recording. The video file is stored in the
/ Start/Stop Recording
PC.
Download
stored in the PC. You can select to download by file or by date.
Enable/Disable Audio Click to enable/disable the audio in playback.
Enter the fisheye playback mode. For details, please refer to
Fisheye Expansion
Chapter 5.2.8 Fisheye Playback.
Display the playback in full-screen mode. Click the icon again or
Full Screen
press Esc key to exit.
5.2.2 Alarm Input Playback
Purpose:
When the alarm input is triggered and the linked video can be searched for Alarm Input Playback and
this function requires the support of the connected device.
Searching Video Files for Alarm Input Playback

Steps:
2. Click to show the Alarm Input panel on the left.
3. (Optional) Click the calendars icon to activate the calendars dialog.
Select the start and end date and set the accurate time, and click OK.
4. Click-and-drag the alarm input to the display window,
or double-click the alarm input to start the playback.
5. The found video files of the selected alarm input will be displayed on the right of the interface.
You can filter the results through the Filter text field.

After searching the video files triggered by alarm input, you can play back the video files in the
following two ways:
Select the video file from the search result list, and then click the icon on the video file,
or double-click the video file to play the video on the display window of playback.
72
You can also select a display window and click the icon in the toolbar to play back the
corresponding video file.
The timeline indicates the time duration for the video file, and the video files of different types
are color coded. Click on the timeline to play back the video of the specific time.
Please refer to Chapter 5.2.1 Normal Playback for the description of the playback control toolbar and
right-click menu. Some icons may not available for Alarm Input playback.
5.2.3 Event Playback
Purpose:
The recordings triggered by event, such as motion detection, VCA detection, behavior analysis, or
access control event (for video access control terminal), can be searched for Event Playback and this
function requires the support of the connected device.
Searching Video Files for Event Playback

Steps:
2. Select the camera and start the normal playback. Refer to Chapter 5.2.1 Normal Playback.
3. Click and the motion detection triggered recording will be searched by default.
4. Click the calendars icon to activate the calendars dialog box.

Note: In the calendar, the date which has scheduled records will be marked with and the
date with event records will be marked with .
5. Select the event type from the drop-down list and the found video files will be displayed. You
can filter the results by inputting the keyword in the Filter text field. Or you can click to go
back to the normal playback.
6. Select the video file from the search result list, and then click the icon on the video file, or
double-click the video file to play the video on the corresponding display window of playback.
73

After searching the recordings triggered by the event, you can play back the video files in the
following two ways:
Select the video file from the search result list, and then click the icon in the toolbar, or
click the icon on the video file, or double-click the video file to play the video on the
corresponding display window of playback.
The timeline indicates the time duration for the video file. Click on the timeline to play back the
video of the specific time.
Event Playback Toolbar:
On the Remote Playback page, the following toolbar buttons are available:
Single Frame (Reverse) Play back the video files frame by frame reversely.
Previous Event Go to the playback of the previous event.
Next Event Go to the playback of the next event.
Slow Forward/Fast Forward Decrease/Increase the play speed of the playback.
Click to turn on/off the audio and adjust the audio
Volume
volume.
74
Display the video playback in full screen mode. Press

Full Screen
ESC to exit.
Download the video files of the camera and the video
Download
files are stored in the PC.
Date The day that has video files will be marked with .
Please refer to Chapter 5.2.1 Normal Playback for the description of the right-click menu. Some icons
may not available for event playback.
Note: You can set the pre-play time for event playback in System Configuration. By default, it is 30s.
For configuring the pre-play time, refer to Chapter 20.2 Live View and Playback Settings.
5.2.4 ATM Playback
Purpose:
Search the video files for ATM DVR.
Note: This function should be supported by the device and the device should be configured with
transaction rules. For details, please refer to the User Manual of the device.
Searching Video Files for ATM Playback

Steps:
2. Select the camera of the ATM DVR and start the normal playback. Refer to Chapter 5.2.1 Normal
Playback.
3. Click to enter the ATM playback interface.
4. Enter the search conditions.

: Input the card number that is contained in the ATM information.
: Check the checkbox and select the transaction type for query, and input the related
transaction amount.
File Type: Select the type of the video file to be searched.
5. Click the calendars icon to activate the calendars dialog.
6. Click Search and the matched files will be displayed. You can filter the results through the Filter
text field.
7. Double-click a file for playback. Or you can click to go back to the normal playback.

After searching the recordings, you can play back the video files in the following two ways:
75

You can click or to zoom in or zoom out the timeline bar.
right-click menu. Some icons may not available for ATM playback.
5.2.5 POS Playback
Purpose:
Search the video files which contain POS information.
Note: This function should be supported by the device and the device should be configured with POS
text overlay. For details, please refer to the User Manual of the device.
Searching Video Files for POS Playback

Steps:
3. Click to enter the POS playback interface.
4. Enter the search conditions.

Keywords: Input the keywords that are contained in the POS information. You can input up to 3
keywords by separating each one with a comma.
Filter: or(|)
information containing any of and(&)
containing all of the keywords.
Case Sensitive: Check the checkbox to search the POS information with case-sensitivity.
5. Click Search and the matched files will be displayed. You can filter the results through the Filter
text field.
6. Double-click a file for playback. Or you can click to go back to the normal playback.

76
You can click or to zoom in or zoom out the timeline bar. You can also use the mouse
wheel to zoom in or zoom out on the timeline.
Please refer to Chapter 5.2.1 Normal Playback for the description of the playback control toolbar,
right-click menu and downloading record files. Some icons may not be available for POS playback.
5.2.6 Synchronous Playback
Purpose:
In synchronous playback, the video files can be played back in synchronization.
Note: Video files from up to 16 cameras can be played back simultaneously.
Steps:
1. Search the video files for the normal playback (Chapter 5.2.1 Normal Playback). At least two
cameras are during playback.
2. Click in the toolbar to enable the synchronous playback. The camera under playback will
start synchronous playback.
3. To disable the synchronous playback, click the icon .
5.2.7 VCA Playback
Purpose:
You can set VCA rule to the searched video files and find the video that VCA event occurs, including
Motion, Intrusion and Line Crossing. This function helps to search out the video that you may be
more concerned and mark it with red color.
Motion Detection: Get all the related motion detection events that occurred in the pre-defined
region.
Intrusion Detection: Detect whether there are people, vehicles and other moving objects
intruding into the pre-defined region.
77
Line Crossing Detection: Bi-directionally detect people, vehicles and other moving objects that
cross a virtual line.
Note: For some devices, you can filter the searched video files by setting the advanced attributes,
such as the gender and age of the human and whether he/she wears glasses.
Steps:
3. Click to enter the VCA playback interface.
4. Select the VCA Type, draw the detection region and set the sensitivity.
Notes:
For Motion, click , and then click and move on the playback window to set the grid
rectangle as the detection region. Or you can click to set all the area shot by the
camera as the detection region.
For Intrusion, click and then click on the playback window to set the vertex for the
detection region.
For Line Crossing, click and then click-and-drag on the playback window to set the
detection line.
Note: For Intrusion and Line Crossing, you can click Advanced Attributes and check the
checkbox to filter the searched video files by setting the target characters, such as the
gender and age of the human and whether he/she wears glasses. This function should be
supported by the device.
To delete the drawn region or line, click to remove it.
6. Click Search and the VCA events occurred in the defined area will be red marked on the
timeline. By default, the playback speed of concerned video will be 1X, and the playback speed
of unconcerned video will be 8X.
Note: You can set to skip the unconcerned video during VCA playback in System Configuration
and the unconcerned video won t be played during VCA playback. Refer to Chapter 20.2 Live
View and Playback Settings.
78

You can click or to zoom in or zoom out the timeline bar.
right-click menu. Some icons may not available for VCA playback.
5.2.8 Fisheye Playback
Purpose:
The video files can be played back in fisheye expansion mode.
Steps:
3. Right-click on the playback video and select Fisheye Expansion to enter the Fisheye Expansion
Mode.
Note: The mounting type of fisheye expansion in playback is set according to the mounting type
in live view. For details, please refer to Chapter 4.7 Live View in Fisheye Mode.
4. You can select the expanding mode for playback as desired.
Fisheye: In the Fisheye view mode, the whole wide-angle view of the camera is displayed.
This view mode is called Fisheye because it
The lens produces curvilinear images of a large area, while distorting the perspective and
angles of objects in the image.
o o
Panorama/Dual-180 Panorama/360 Panorama: In the Panorama view mode, the
distorted fisheye image is transformed to normal perspective image by some calibration
methods.
PTZ: The PTZ view is the close-up view of some defined area in the Fisheye view or
Panorama view, and it supports the electronic PTZ function, which is also called e-PTZ.
Note: Each PTZ view is marked on the Fisheye view and Panorama view with a specific
navigation box. You can drag the navigation box on the Fisheye view or Panorama view to
adjust the PTZ view, or drag the PTZ view to adjust the view to the desired angle.
79
Right-click on a playing window and you can switch the selected window to full-screen mode.
Press ESC key on the keyboard or right-click on the window and select Quit Full Screen to exit the
full-screen mode.
On the Normal Playback page, the following toolbar buttons are available:
Single Frame (Reverse) Play back the video files frame by frame reversely.
Slow Forward/Fast
Decrease/Increase the play speed of the playback.
Forward
Volume Click to turn on/off the audio and adjust the audio volume.
Full Screen Display the video playback in full-screen mode. Press ESC to exit.
5.2.9 Downloading Video Files
During playback, you can click on the toolbar to download the video files of the camera to the
local PC. You can select to download by file, by date, or by tag.
You can also download the video files of multiple cameras at the same time.
Note: You cannot download the video files of Hik-Connect device.
Download by Files
Steps:
1. Click Download by Files tab in the File Download interface. You can view the video files
information of selected camera.
2. Check the checkbox of the video file and the total size of the selected files will be shown below.
3. Click Download to start downloading the file to the local PC.
You can input the flow (0 to 32768 kbps) and click Set to control the downloading speed.
80
4. Optionally, you can click Stop to stop downloading manually.
Download by Date
Steps:
1. Click Download by Date tab in the File Download interface.
2. Check the checkbox of the time duration to enable it, and click to set the start and end time.
3. Click Download to start downloading the file to the local PC. The progress bar shows the
downloading process.
81
Note: When downloading video file of one time duration, you can set to merge the video files. The
video files in the set time duration can be merged for downloading. For configuring merging
downloaded video files, refer to Chapter 20.2 Live View and Playback Settings.
Download by Tag
Steps:
1. Click Download by Tag tab in the File Download interface. The added tags will be displayed.
2. Check the checkbox of the tag and the total size of the selected files will be shown below.
3. Click Download to start downloading the selected file (30 seconds before the selected tag to 30
seconds after the tag) to the local PC. You can input the flow (0 to 32768 kbps) and click Set to
control the downloading speed.
82
Download for Multiple Cameras
Purpose:
You can download the video files of the multiple cameras simultaneously.
Before You Start:
Play the video files of multiple cameras.
Steps:
1. Start playback for multiple cameras.
2. Click to open the Download for Multiple Cameras dialog.
3. Check the checkbox(es) to select cameras.

4. Set the start time and end time.
5. (Optional) Check the Download Player checkbox to download the player.
83
6. Click Download to start downloading the file to the local PC. The progress bar shows the
downloading process.
Note: The client support downloading video files of up to 16 cameras.
84
Chapter 6 Event Management

Purpose:
In iVMS-4200 client software, rules can be set up for triggers and linkage actions. You can assign
linkage actions to the trigger by setting up a rule. For example, when motion is detected, an audible
warning appears or other linkage actions happen.

or click Tool->Event Management to open the Event Management page.
You can set different linkage actions for the following triggers:
Note: The event detection should be supported by the device before you can configure it.
Camera Event
Alarm Input
Exception
Zone Event (For details, refer to Chapter 13.1 Configuring Zone Event.)
Access Control Event (For details, refer to Chapter 15.8.1 Access Control Event Linkage.)
Access Control Alarm Input (For details, refer to Chapter 15.8.2 Access Control Alarm Input
Linkage.)
Event Card Linkage (For details, refer to Chapter 15.8.3 Event Card Linkage.)
Cross-Device Linkage (For details, refer to Chapter 15.8.4 Cross-Device Linkage.
Pyronix Control Panel Event (For details, refer to Chapter 14.2 Configuring Event.
Note: The event types of Camera Event vary according to different devices. Here we take the
configuration of some event types as examples. For other types, please refer to the User Manual of
the device.
85
6.1 Configuring Motion Detection Alarm

Purpose:
A motion detection alarm is triggered when the client software detects motion within its defined
area. The linkage actions, including alarm output, channel record and client action can be set.
Note: The configuration varies according to different devices. For details, please refer to the User
Manual of the devices.
Steps:
1. Open the Event Management page and click Camera Event tab.
2. Select the camera to be configured and select Motion Detection as the event type.
3. Check the checkbox Enable to enable the function of motion detection. Check the checkbox
Enable Dynamic Analysis to mark the detected objects with green rectangles in live view and
playback.
4. Select the arming schedule template from the drop-down list.
All-day Template: For all-day continuous arming.
Weekday Template: For working-hours continuous arming from 8:00 AM to 8:00 PM.
Template 01 to 09: Fixed templates for special schedules. You can edit the templates if needed.
Custom: Can be customized as desired.
If you need to edit or customize the template, refer to Configuring Arming Schedule Template.
5. Select the Configuration as desired.
Note: For some camera, you can select Normal or Expert as the configuration type. Expert mode
is mainly used to configure the sensitivity and proportion of object on area of each area for
different day/night switch. For details, please refer to the User Manual of the device.
6. Select the triggered camera. The image or video from the triggered camera will pop up or be
displayed on the Video Wall when motion detection alarm occurs.
To capture the picture of the triggered camera when the selected event occurs, you can also set
the capture schedule and the storage in Storage Schedule. For details, refer to Chapter 5.1
Remote Storage.
7. Click-and-drag the mouse to draw a defined area for the arming region.
You can click the icon to set the whole video area as detection area, or click the icon to
clear all the detection area.
8. Drag the slider on the sensitivity bar to adjust the motion detection sensitivity. The larger the
value is, the more sensitive the detection is.
9. Check the checkboxes to activate the linkage actions. For details, refer to Table 6.1 Linkage
Actions for Motion Detection Alarm.
10. Optionally, click Copy to to copy the event parameters to other channels.
86
Linkage Actions Descriptions

Enable the alarm output function. Select the alarm output port and the
Alarm Output
external device connected to the port can be controlled.
Channel Record Start the recording of the selected cameras when alarm is triggered.
The client software gives an audible warning when alarm is triggered. You can
Audible Warning select the alarm sound for audible warning. For setting the alarm sound,
please refer to Chapter 20.7 Alarm Sound Settings.
Email Linkage Send an email notification of the alarm information to one or more receivers.
Alarm on E-map Display the alarm information on the E-map.
Alarm Triggered The image with alarm information pops up when alarm is triggered.
Pop-up Image Note: You should set the triggered camera first.
Display the video of the trigged camera on the Video Wall when alarm is
Alarm Triggered
triggered.
Video Wall Display
Note: You should set the triggered camera first.
Configuring Arming Schedule Template

Perform the following steps to configure the arming schedule template:
If Template 01 to 09 is selected in the drop-down list, start from step 1;
If Custom is selected in the drop-down list, start from step 2.
Steps:
1. Click Edit to enter the Templates Management interface. Select the template to be set and you
can edit the template name.
2. Set the time schedule for the selected template.
When the cursor turns to , you can set the time period.
When the cursor turns to , you can move the selected time bar you just edited. You can
also edit the displayed time point to set the accurate time period.
and then click the icon to delete the selected time bar,
or click the icon to delete all the time bars,
87
or click the icon to copy the time bar settings to the other dates.
You can click Save as Schedule Template on the Custom Schedule interface, and then the
custom template can be saved as template 01 to 09.
Note: Up to 8 time periods can be set for each day in the arming schedule template.
6.2 Configuring Video Tampering Alarm

Purpose:
A video tampering alarm is triggered when the camera is covered and the monitoring area cannot be
viewed. The linkage actions, including alarm output and client action can be set.
Steps:
1. Open the Event Management page and click the Camera Event tab.
2. Select the camera to be configured and select Video Tampering Detection as the event type.
3. Check the checkbox Enable to enable the function of video tampering.
displayed on the Video Wall when video tampering alarm occurs.
88
Remote Storage.
6. Click-and-drag the mouse to draw a defined area for the arming region.
You can click the icon to set the whole video area as detection area, or click the icon to
clear the detection area.
7. Drag the slider on the sensitivity bar to adjust the tampering alarm sensitivity.
Actions for Tampering Alarm.
9. Optionally, click Copy to to copy the event parameters to other cameras.

Alarm Output
Alarm Triggered The image of the triggered camera pops up when alarm is triggered.
Alarm Triggered
triggered.
Video Wall Display
6.3 Configuring Video Loss Alarm

Purpose:
When the client software cannot receive video signal from the front-end devices, the video loss
89
alarm will be triggered. The linkage actions, including alarm output and client action can be set.
Steps:
2. Select the camera to be configured and select Video Loss as the event type.
3. Check the checkbox Enable to enable the function of video loss alarm.
displayed on the Video Wall when video loss alarm occurs.
Remote Storage.
Actions for Video Loss Alarm.
8. Click Save to save the new settings.

Alarm Output
Alarm Triggered
triggered.
Video Wall Display
90
6.4 Configuring Audio Exception Alarm

Purpose:
The abnormal sounds, such as the silence detection, environment noise detection, and current noise
detection, can be detected.
Enabling the Audio Input Detection can detects the exceptions of audio input condition.
Enabling the Sudden Increase of Sound Intensity can detects the sudden increase of the sound
intensity, and it consists of the following two settings.
Sensitivity: Range [1 to 100], the smaller the value the more severe the change should be to
trigger the detection.
Sound Intensity Threshold: Range [1 to 100], it can filter the sound in the environment, the
louder the environment sound, the higher the value should be. You can adjust it according to
the real environment.
Enabling the Sudden Decrease of Sound Intensity can detects the sudden decrease of the sound
intensity, by which you can find the abnormal silent. E.g.: The electric generator makes loud noise
You can set the sensitivity level [0 to 100] according to the actual environment.
Note: The Audio Exception function requires the support of connected device.
Steps:
2. Select the camera to be configured and select Audio Exception Detection as the event type.
3. Check the related checkbox to enable the related function of audio detection alarm.
4. Set the sensitivity and sound intensity threshold.
displayed on the Video Wall when audio exception alarm occurs.
Remote Storage.
Actions for Audio Detection Alarm.
91

Alarm Output
Alarm Triggered
triggered.
Video Wall Display
6.5 Configuring Face Detection Alarm

Purpose:
The camera will detect human faces within the monitoring area automatically if the function is
enabled. A series of alarm action will be triggered if the alarm is triggered.
Note: The Face Detection function requires the support of connected device.
Steps:
2. Select the camera to be configured and select Face Detection as the event type.
3. Check the checkbox Enable to enable the function of face detection alarm.
displayed on the Video Wall when face detection alarm occurs.
92
Remote Storage.
6. Set the sensitivity for face detection.
7. Check the checkbox Enable Dynamic Analysis for Face Detection if you want the detected face
get marked with rectangle in the live view.
Actions for Face Detection Alarm.

Alarm Output
Alarm Triggered
triggered.
Video Wall Display
93
6.6 Configuring Line Crossing Detection

Alarm
Purpose:
This function can be used for detecting people, vehicles and objects crossing a pre-defined virtual
line. The crossing direction can be set as bidirectional, from left to right or from right to left. And a
series of linkage method will be triggered if any object is detected.
Note: This line crossing detection function requires the support of connected device.
Steps:
2. Select the camera to be configured and select Line Crossing Detection as the event type.
3. Check the checkbox Enable to enable the function.
Note: For the specific speed dome, you can click Lock to prevent the speed dome from moving
automatically during the configuration.
displayed on the Video Wall when line crossing detection alarm occurs.
Remote Storage.
6. Configure the arming region.
Virtual Line ID: Click the drop-down list to choose an ID for the virtual line.
Note: For some specific speed dome, you can click PTZ to move the speed dome to the desired
scene which corresponds to a virtual line ID. In this way, you can configure the different line
crossing detection alarms for multiple views.
Virtual Line Direction: You can select the directions as A<->B, A ->B, and B->A.
A<->B: When an object going across the line with both directions, it can be detected and
alarms are triggered.
A->B: Only the object crossing the virtual line from the A side to the B side can be
detected.
B->A: Only the object crossing the virtual line from the B side to the A side can be
detected.
7. Set the sensitivity [1 to 100].
8. Click and draw a virtual line on the preview window. Optionally, you can click and drag
the virtual line to adjust its position, click to delete the selected line.
Note: Select another virtual line ID and draw another one. Up to 4 lines can be drawn.
Actions for Line Crossing Detection Alarm.
94

Alarm Output
Alarm Triggered
triggered.
Video Wall Display
6.7 Configuring Alarm Input Linkage

Purpose:
When a device's alarm input port receives a signal from an external alarm device, such as smoke
detector, doorbell, etc., the alarm input linkage actions are triggered for notification.
Before you start:
Add the alarm inputs to the client, click Import on the Group Management interface, click the Alarm
Input tab and import alarm inputs into groups for management.
Steps:
1. Open the Event Management page and click the Alarm Input tab.
2. Select the alarm input channel to be configured.
3. Check the checkbox Enable.
4. Input a descriptive name of the alarm.
5. Set the alarm status according to the alarm input device.
95

displayed on the Video Wall when alarm input occurs.
Remote Storage.
Actions for Alarm Input.
9. Optionally, click Copy to to copy the event parameters to other alarm inputs.

Alarm Output
Alarm Triggered
triggered.
Video Wall Display
6.8 Configuring Device Exception Linkage

Steps:
96
1. Open the Event Management page and click the Exception tab.
2. Select the device to be configured.
3. Select the device exception type, including HDD full, HDD exception, illegal login, device offline,
etc.
4. Check the checkbox Enable.
Actions for Device Exception.
6. Optionally, click Copy to to copy the event parameters to other devices.

Alarm Output external device connected to the port can be controlled.
Note: Alarm Output is not available for Device Offline exception.
97
Chapter 7 Alarm and Event Center

Purpose:
The received recent alarms and events of all added devices can be displayed.
Before you start:
Before you can receive the alarm information from the device, you need to click Tool->Device
Arming Control and arm the device by checking the corresponding checkbox. Then the alarm
information will be auto uploaded to the client software when alarm occurs.
Steps:
1. Click the icon in Alarms and Events Toolbar to show the Alarms and Events panel.
2. You can click to display the Alarm Event interface.
Or click icon on the control panel to enter the Alarm Event interface.
98
On the Alarms and Events panel, the following toolbar buttons are available:
Clear Info Clear the information of alarms and events displayed on the list.
Enable/Disable Alarm
Click to enable/disable image pop-up when alarms occur.
Triggered Pop-up Image
Enable/Disable Audio Click to enable/disable the audio warning for the alarm.
Auto Hide/Lock Click to hide automatically/lock the Alarms and Events panel.
Maximize Maximize the Alarms and Events panel in a new tab page.
Show/Hide Click to show/hide the Alarms and Events panel.
7.1 Viewing Alarms Information

Purpose:
Different alarm types can be displayed on the panel: Motion Detection, Video/Audio Exception,
Alarm Input, Device Exception, VCA Alarm, CID Alarm, Access Control Alarm, and Other Alarm. You
can check the checkbox to enable the displaying of that type alarm.
Before you start:
To display the alarms, the event parameters need to be configured.
Steps:
1. Click the Alarm tab.
2. Check the checkboxes of different alarm types.
3. When an alarm occurs, the icon twinkles to call attention. The alarm information, including
the time, source, details and content will be displayed.
4. Click to get a live view of the alarm triggered camera.
99
You can view the live video of the triggered camera. You can click Prev Page or Next Page button
to view the previous or next alarm information.
Notes:
The Picture Storage should be checked for storing the alarm pictures of the camera on the
storage server. You can click Configure to set the parameters. For details, please refer to
Chapter 5.1.2 Storing on Storage Device.
The Prioritize Display of Latest Alarm is unchecked by default.
You can check this checkbox to switch to view the latest triggered alarm. The alarm window
is in 4-window division. The latest alarm will replace the earliest alarm window of the
displayed four windows.
5. Click to send an email notification of the alarm to one or more receivers if the email
settings are properly configured (Chapter 20.8 Email Settings).
6. Click to display the video of alarm triggered camera on the Video Wall. You can enter the
Video Wall interface to check the alarm triggered video playing on the screen which set as the
alarm window. The physical video wall also displays the video.
Note: You should add decoding device and configure the video wall. For details, please refer to
Chapter 12 Decoding and Displaying Video on Video Wall.
Click under the Note column to input the description for the alarm.
7. To clear the alarm information, click the icon , or right-click on an alarm log and then click
Clear.
7.2 Viewing Events Information

Purpose:
The abnormal events of the client software, such as the live view failure, device disconnection, can
also be displayed.
Steps:
1. Click the Event tab.
The event information, including the time and detailed description will be displayed.
2. To clear the event information, click the icon , or right-click on the event log and then click
100
Clear.
7.3 Viewing Pop-up Alarm Information

After enabling the event linkage of Alarm Triggered Pop-up Image, and enabling the Enable Alarm
Triggered Pop-up Image function on the client, the alarm image will pop up when the corresponding
event/alarm is triggered.
You can view the live video of the triggered camera. In the right panel, the alarm picture displays.
Notes:
The Picture Storage should be checked for storing the alarm pictures of the camera on the
storage server. You can click Configure to set the parameters. For details, please refer to
101
Chapter 5.1.2 Storing on Storage Device.

The Prioritize Display of Latest Alarm is checked by default and the alarm window is in
4-window division. The latest alarm will replace the earliest alarm window of the displayed four
windows.
You can uncheck this checkbox to switch to view the current triggered alarm. You can click Prev
Page or Next Page button to view the previous or next alarm information.
102
Chapter 8 E-map Management

Purpose:
The E-map function gives a visual overview of the locations and distributions of the installed cameras,
alarm input devices, zones, and access control points. You can get the live view of the cameras on the
map, and you will get a notification message from the map when alarm is triggered. You can also
control the access control points on the E-map such as opening and closing door.

or click View->E-map to open the E-map page.
E-map Page
1 Group List
2 Map Display Area
3 E-map Toolbar
8.1 Adding an E-map

Purpose:
An E-map needs to be added as the parent map for the hot spots and hot regions.
Steps:
1. Open the E-map page.
2. Select a group for which you want to add a map.
3. Click the icon in the Map Display Area to open the map adding dialog box.
4. Input a descriptive name of the added map as desired.
5. Click the icon and select a map file from the local path.
Notes:
The picture format of the map can only be *.png, *.jpg or *.bmp.
Only one map can be added to a group.
103
The map added is displayed in the Map Display Area. Use the mouse wheel or click or , to
zoom in or zoom out on the map. You can click-and-drag the yellow window in the lower-right corner
or use the direction buttons and zoom bar to adjust the map area for view.
Click the button Edit Map or Map Preview in the E-map toolbar to enter the map editing mode or
map preview mode.
E-map Toolbar in Map Editing Mode:
E-map Toolbar in Map Preview Mode:
On the E-map page, the following toolbar buttons are available:

Modify Map Modify the map information, including the map name and file path.
Delete Map Delete the current map.
Add Camera Add a camera as the hot spot on the map.
Add Alarm Input Add an alarm input sensor as the hot spot on the map.
Add Access Control Point Add an access control point as the hot spot on the map.
Add Zone Add a zone as the hot spot on the map.
Add Hot Region Add a map as the hot region on the current map.
Modify Modify the information of the selected hot spot or hot region.
104
Delete Delete the selected hot spot or hot region.

Clear Alarm Info Clear the alarm information displayed on the map.
Back to Parent Map Go back to the parent map.
8.2 Hot Spot Function

Purpose:
The cameras and alarm inputs can be added on the map and are called the hot spots. The hot spots
show the locations of the cameras and alarm inputs, and you can also get the live view and alarm
information of the surveillance scenarios through the hot spots.
Notes:
For managing and previewing the zone hot spot, please refer to Chapter 13.3 Displaying Zone
on E-map.
For managing and previewing the access control point hot spot, please refer to Chapter 15.11
Displaying Access Control Point on E-map.
8.2.1 Adding Hot Spots
Adding Cameras as Hot Spots

Steps:
1. Click the Edit Map button in the E-map toolbar to enter the map editing mode.
2. Click the icon in the toolbar to open the Add Hot Spot dialog box.
3. Check the checkboxes to select the cameras to be added.
4. Optionally, you can edit hot spot name, select the name color and select the hot spot icon by
double-clicking the corresponding field.
5. Click OK to save the settings. The camera icons are added on the map as hot spots and the icons
of added cameras changes from to in the group list. You can click-and-drag the camera
icons to move the hot spots to the desired locations.
You can also click-and-drag the camera icons from the group list to the map directly to add the
hot spots.
105
Adding Alarm Inputs as Hot Spots

Steps:
3. Check the checkboxes to select the alarm inputs to be added.
5. Click OK to save the settings. The alarm input icons are added on the map as hot spots and the
icons of added alarm inputs changes from to in the group list. You can click-and-drag
the alarm input icons to move the hot spots to the desired locations.
You can also click-and-drag the alarm input icons from the alarm input list to the map directly to
add the hot spot.
8.2.2 Modifying Hot Spots
Purpose:
You can modify the information of the added hot spots on the map, including the name, the color,
the icon, etc.
Steps:
2. Select the hot spot icon on the map and then click in the toolbar, right-click the hot spot
icon and select Modify, or double-click the hot spot icon on the map to open the Modify Hot
Spot dialog box.
3. You can edit the hot spot name in the text field and select the color, the icon and the linked
camera or alarm input.
To delete the hot spot, select the hot spot icon and click in the toolbar, or right-click the hot
spot icon and select Delete.
106
8.2.3 Previewing Hot Spots
Steps:
1. Click the Map Preview button in the E-map toolbar to enter the map preview mode.
2. Double-click the camera hot spots or right-click it and select Live View, and you can get the live
view of the cameras.
3. If there is any alarm triggered, an icon will appear and twinkle near the hot spot (it will
twinkle for 10s). Click the alarm icon, and then you can check the alarm information, including
alarm type and triggering time.
Note: To display the alarm information on the map, the Alarm on E-map functionality needs to be set
as the alarm linkage action. For details, refer to Chapter 6 Event Management.
8.3 Hot Region Function

Purpose:
The hot region function links a map to another map. When you add a map to another map as a hot
107
region, an icon of the link to the added map is shown on the main map. The added map is called child
map while the map to which you add the hot region is the parent map.
Note: A map can only be added as the hot region for one time.
8.3.1 Adding Hot Regions
Before you start:

Add a map to another group.
Steps:
2. Select an added map as the parent map.
3. Click the icon in the toolbar to open the Add Hot Region dialog box.
4. Check the checkbox to select the child map to be linked.
5. Optionally, you can edit the hot region name, and select the hot region color and icon by
6. Click OK to save the settings. The child map icons are added on the parent map as the hot
regions. You can click-and-drag the child map icons to move the hot regions to desired locations.
8.3.2 Modifying Hot Regions
Purpose:
You can modify the information of the hot regions on the parent map, including the name, the color,
the icon, etc.
Steps:
2. Select the hot region icon on the parent map and then click in the toolbar, right-click the
hot spot icon and select Modify, or double-click the hot region icon to open the Modify Hot
Region dialog box.
3. You can edit the hot region name in the text field and select the color, the icon and the linked
child map.
To delete the hot region, select the hot region icon and click in the toolbar, or right-click the
108
hot spot icon and select Delete.
8.3.3 Previewing Hot Regions
Steps:
2. Click the hot region icon to go to the linked child map.
3. The hot spots can also be added on the hot regions.
4. You can click the icon in the toolbar to go back to the parent map.
You can also click the icon in the toolbar to clear the alarm information.
109
Chapter 9 Hik-Connect
Purpose:
The client software also supports to register a Hik-Connect account, log into your Hik-Connect and
manage the devices which support the Hik-Connect service.
9.1 Registering a Hik-Connect Account

Purpose:
If you do not have a Hik-Connect account, you can register one.
Steps:
1. Open the Device Management page and click the Device tab.
2. Click Add New Device Type, select Hik-Connect Device and click OK.
3. Click Hik-Connect Device on the list to enter the following page.
4. Select the region where your device is located.

5. Click Login to pop up the following dialog.
110
6. Click Register to pop up the Register Account dialog.
7. Enter the required information to register an account.

User Name: Edit a user name for your account as desired.
Password and Confirm Password: Enter the password for your account and confirm it.
Phone Number/Email Address: Enter your phone number or email account to register the
account.
Verification Code: Click Send Message and system will send verification code to your phone or
email. Input the received verification code in the Verification Code field.
8. Click Register to finish registeration.
9.2 Logging into Hik-Connect Account

Note: The login will expire in 7 days. You should login the account again when expired.
Steps:
1. Click Login.
2. Enter the user name/phone number and password.
3. Click Login to log into your account.
4. (Optional) Click Logout to log out of your Hik-Connect account.
Note: You cannot receive alarm information of the devices of the account if you log out.
9.3 Device Management

Purpose:
You can add the Hik-Connect device to the Hik-Connect account, and delete the added device(s)
from the account. You can also do remote configuration and group management to the devices of
111
the Hik-Connect account.
9.3.1 Adding Device to Hik-Connect Account
Purpose:
You can add the Hik-Connect device to the Hik-Connect Account via two ways on the client, i.e.,
adding manually or adding via Online Device.
Note: You can add 256 devices (1024 cameras) to one Hik-Connect account at most.
Adding Device Manually
Purpose:
You can add Hik-Connect device to the Hik-Connect account manually.
Steps:
1. Click Add Device to pop up the Add device dialog.
2. Input the serial No. and verification code of the device.

Notes:
Only the device that supports the Hik-Connect service can be added.
The serial No. is marked on the label of you device.
The verification code is created when you enabling the Hik-Connect service. For details,
refer to Chapter 3.1.1 Activating Device.
The device can only be added to one Hik-Connect account.
3. Click OK to add the device.
The successfully added device will list on the device management interface.
Note: After adding the device to the Hik-Connect account, you should add the device by
Hik-Connect domain if you want to add the device to the local client. For details, refer to
Chapter 3.1.5 Adding Devices by Hik-Connect Domain.
Adding Device via Online Device
Purpose:
You can add Hik-Connect device via the online device list.
Steps:
1. Select the device(s) which support Hik-Connect service on the online device list.
You can also input the keyword in the Filter field to filter the required device.
112
2. (Optional) Activate the device if it is inactivated. For details, refer to Chapter 3.1.1 Activating
Device.
3. (Optional) Enable the Hik-Connect service. For details, refer to Chapter 3.1.1 Activating Device.
4. Click Add to Account to pop up the Add Device dialog.
5. Input the verification code.

Note: The verification code is created when you enabling the Hik-Connect service. For details,
refer to Chapter 3.1.1 Activating Device.
6. Click OK to add the device.
You can also click Cancel to cancel the operation.
Note: After adding the device to the Hik-Connect account, you should add the device by
Hik-Connect domain if you want to add the device to the local client. For details, refer to
Chapter 3.1.5 Adding Devices by Hik-Connect Domain.
7. (Optional) You can select device from the device management interface and click Delete to
remove the device from the Hik-Connect account.
9.3.2 Remote Configuration
Click to select a device on the device management page and click Remote Configuration to pop up
the remote configuration interface of the device.
You can do some remote configurations for the device. For detailed settings about the remote
configuration, please refer to the User Manual of the device.
Note: This function should be supported by the Hik-Connect device. Only NVR supports this function
currently.
9.3.3 Group Management
A group named as the Hik-Connect account name is created by default after you login the account,
you can import the cameras of the added devices to the default group or other groups.
For details about group management, refer to Chapter 3.2 Group Management.
113
Modify
Note: For modifying Hik-Connect device, refer to Chapter 9.3.4 Modifying Camera.
9.3.4 Modifying Camera
Steps:
1. Click Group tab to enter the group management page.
2. Select camera from the resource list.
3. Click Modify to pop up the Modify Camera dialog.
4. Edit the camera information, including name, rotate, protocol type, etc.
Stream Key: For Hik-Connect device, the stream key is the same with the verification code,
which is created when you enable the Hik-Connect service. For details, refer to Chapter 3.1.1
Activating Device.
Notes:
If the live view or video file(s) of the Hik-Connect device is encrypted, you should input the
stream key on the Modify Camera dialog before you can view the live view or video file(s)
of the device.
You can set whether to encrypt the live view or video file(s) of the Hik-Connect device on
the Hik-Conncet client software. For details, refer to the User Manual of the Hik-Connect
Client Software.
9.4 Live View and Playback

Before You Start:
Input the stream key on the Modify Camera dialog if the live view of the Hik-Connect device is
encrypted. For details, refer to 9.3.4 Modifying Camera.
You can view the live view of the device, and play the video files stored on the local device or the
114
storage server. For details, refer to Chapter 4 Live View and Chapter 5 Remote Storage Schedule
Settings and Playback.
Notes:
You can perform two-way audio for Hik-Connect device during live view.
The Hik-Connect device only supports normal playback.
The Hik-Connect device support reverse playback, adding tags, fast forward, and slow
forward during playback.
You cannot download the video files for Hik-Connect device.
For PTZ control during live view, the Hik-Connect device only supports the PTZ movements to
the upside, downside, left, and right.
115
Chapter 10 VCA Devices Management

Purpose:
The VCA (Video Content Analysis) devices can be added to the client for VCA configuration, including
VCA resource allocation, rule settings, VQD (Video Quality Diagnostics), etc.
10.1 Allocating VCA Resource

Before you start: You should add the VCA device to the software. Please refer to Chapter 3.1 Adding
Device for adding the VCA device as Hikvision Device.
Purpose:
Before you can set the VCA configuration for the added device, you need to configure the VCA
resource of the device which means to enable the VCA function of the corresponding cameras.
Steps:
1. In the Device Management Configuration interface, select Server tab.
2. Click to select the VCA device and click Remote Configuration to activate the Remote
Configuration window.
3. In the Remote Configuration window, click VCA Config to expand the VCA configuration list. In
the camera dropdown list, select VCA Resource Allocation to allocate the VCA resource.
4. In the Resource Information area, you can view the VCA type and VCA resource usage of the
device.
Example: In the figure shown below, the VCA type of the device is Heat Map and four cameras
are available for configuring VCA settings. The camera1 has been enabled with VCA function.
5. In the VCA Resource Allocation panel, check checkbox to enable the VCA function of the
camera.
116
6. Click Save to save the setting.
10.2 Configuring VCA Settings

After allocating the VCA resource, you can configure the VCA settings for the camera.
Steps:
1. In the Device Management Configuration interface, select Server tab.
2. Click to select the VCA device and click Remote Configuration to activate the Remote
Configuration window.
3. In the Remote Configuration window, click VCA Config to expand the VCA configuration list.
Note: The VCA configuration list varies according to different VCA devices.
You can set the VCA configuration for the camera according to the provided instruction.
Click Enable Wizard and the wizard will guide you to set the quick VCA configuration for the camera.
117
Chapter 11 Forwarding Video Stream

through Stream Media Server
Purpose:
There is always a limit of the device remote access number. When there are many users wanting to
get remote access to the device to get the live view, you can add the stream media server and get
the video data stream from the stream media server, thus to lower the load of the device.
11.1 Adding Stream Media Server

Before you start:
The stream media server application software needs to be installed and it is packed in the iVMS-4200
software package. When installing the iVMS-4200, check the checkbox Stream Media Server to
enable the installation of stream media server.
Steps:
1. Click the shortcut icon on the desktop to run the stream media server.
Notes:
You can also forward the video through the stream media server installed on other PC.
If the stream media server port (value: 554) is occupied by other service, a dialog box will
pop up. You should change the port No. to other value to ensure the proper running of the
stream media server.
2. Open the Device Management page and click the Device tab.
3. Click Add New Device Type, select Stream Media Server and click OK.
4. Click Stream Media Server on the list and then click Add.
You can add the stream media server in the following two ways:
Adding Stream Media Server by IP Address
Perform the following steps to add the stream media server:
1) Select IP Address as the adding mode.
2) Input the nickname and IP address of the stream media server. The default port value
is 554.
3) Click Add to add the stream media server to the client software.
Adding Stream Media Server by IP Segment

Perform the following steps to add the stream media server by IP segment:
1) Select IP Segment as the adding mode.
118
2) Input the start IP and end IP. The default port value is 554.
3) Click Add to add the stream media server to the client software. The steam media
server of which the IP address is between the start IP and end IP will be added to the
client.
Note: For one client, up to 16 stream media servers can be added.
11.2 Adding Cameras to Stream Media Server

to Forward Video Stream
Purpose:
To get the video stream of a camera via stream media server, you need to connect the camera to the
stream media server.
Steps:
1. Select the stream media server from the list.
2. Click Configure to enter the Stream Media Server Settings interface.
3. Select the cameras of which the video stream is to be forwarded via the stream media server.
5. Go the Main View page and start the live view of the cameras again. You can check the channel
number of the video stream forwarded through or sent from the stream media server.
Notes:
For one stream media server, up to 64 channels of video stream can be forwarded through it
and up to 200 channels of video stream can be sent to clients from it.
If the camera is offline, the client can still get the live video via the stream media server.
119
Chapter 12 Decoding and Displaying

Video on Video Wall
Purpose:
The Video Wall module provides the video decoding functionality, and the decoded video can be
displayed on the Video Wall for an attention-grabbing performance.
Click the icon on the control panel, or click View->Video Wall to open the Video Wall page.
12.1 Adding Encoding Device

Purpose:
You should add the encoding device for decoding and displaying on the video wall. If you do not add
the encoding devices in the Device Management page, you can add them in Video Wall page.
Steps:
1. In the Camera area, click to activate the adding device window.
120
2. Select the adding mode and configure the corresponding settings for the device.
For the detailed configuration about the 4 adding modes, please refer to the following chapters:
By specifying the device IP address, refer to Chapter 3.1.3 Adding Devices by IP or Domain
Name.
By specifying an IP segment, refer to Chapter 3.1.4 Adding Devices by IP Segment.
By IP Server, refer to Chapter 3.1.8 Adding Devices by IP Server.
By HiDDNS, refer to Chapter 3.1.9 Adding Devices by HiDDNS.
(Optional) If you want to add the third-party encoding device, please perform the following steps:
Steps:
1. Go to the Device Management page and click the Device tab.
2. Click Add New Device Type, select Third-party Encoding Device and click OK.
3. Select Third-party Encoding Device in the device type panel and click Add to activate the Add
Device window.
For IP/Domain: Edit the nickname, IP address/domain name, port No., user name,
password, channel number, start from and protocol for the device.
For IP Segment: Edit the start IP, end IP, port No., user name, password, channel number,
start from and protocol for the device.
Example: If you input 4 in Start From field, it means that the starting channel No. is 4.
121
12.2 Adding Decoding Device

Purpose:
To decode the video of the encoding device and display the decoded video on the Video Wall, the
decoding device needs to be added to the client.
Steps:
1. Click Enter Video Wall Config to enter the decoding device and video wall configuration
interface.
2. In the Decoding Output area, click to activate the Quick Adding of Decoding Device window.
3. There are two adding modes available. Select the adding mode and configure the corresponding
settings for the device.
For the detailed configuration about the two adding modes, please refer to the following
chapters:
By specifying the device IP address or domain, refer to Chapter 3.1.3 Adding Devices by IP
or Domain Name.
By specifying an IP segment, refer to Chapter 3.1.4 Adding Devices by IP Segment.
Edit the Output of the Decoding Device
Steps:
1. In the Decoding Output area, click before the decoding device to list the outputs of it.
2. Double-click an output and you can edit the parameters for it. Or you can right-click a decoding
output in the video wall area and select Decoding Output Configuration to edit its parameters.
Note: For HDMI and VGA outputs, the resolution can be configured; for BNC output, the video
standard can be configured.
3. (Optional) you can check the checkbox of Batch Configuration and select other outputs to copy
the settings to.
122
Notes:
With the extension HDMI output board, NVR also supports decoding function:
It can link with the video inputs and display them on the video wall without through decoding
device.
It can realize the video wall display, windowing and roaming of images of the cameras directly
via the HDMI outputs.
You can also edit the parameters of the decoding output.
For details, please refer to the User Manual of the NVR.
12.3 Configuring Video Wall Settings

Purpose:
After the encoding device and decoding device have been added, the parameters of Video Wall need
to be configured for video display.
12.3.1 Linking Decoding Output with Video Wall
Steps:
1. Click Enter Video Wall Config to enter the decoding device and video wall configuration
interface.
2. A default video wall view with the window division of 4*4 is provided. You can edit the default
video wall or add a new video wall as desired.
Task 1: Add a Video Wall
1) Right-click the video wall and select Add Video Wall, or click to activate the Add Video
Wall window.
2) Enter the name, row number, column number and proportion of the video wall.
123
3) Click Add.
Task 2: Edit a Video Wall
1) Right-click the video wall and select Modify Video Wall to edit it.
2) In the pop-up window, you can edit the name, row number, column number and proportion
of the video wall.
Note: You can also drag your mouse to set the needed video wall.
3) Click Modify to save the settings.
Task 3: Delete a Video Wall
To delete the video wall, right-click the video wall and select Delete Video Wall, or click of
the video wall.
3. Click-and-drag the decoding output on the left-side list to the display window of video wall, to
configure the one-to-one correspondence. You can also click and hold the Ctrl or Shift key to
select multiple outputs and then drag them to the video wall for configuring linkage in batch.
You can click in the upper-right corner of the display window to release the linkage.
Notes:
Up to 4 video walls can be added to the client software.
The total number of the display windows of the video wall should be no more than 100.
The ranges of the row number and column number are both between 1 and 10.
124
12.3.2 Multi-Screen Display
Purpose:
For DS-6400HDI-T series and DS-6900UDI series decoder, you can joint multiple screens as a whole
window. In this way, the decoded video of one camera can be shown on the jointed window.
Before you start:
You should add DS-6400HDI-T series and DS-6900UDI series decoding device to the client. Please
refer to Chapter 12.2 Adding Decoding Device for detailed configuration about adding decoding
device.
Steps:
1. Perform the step 3 of Chapter 12.3.1 Linking Decoding Output with Video Wall to configure the
linkage between the decoder and video wall.
2. Click-and-drag you mouse to select the adjacent display windows for jointing.
Notes:
You can only joint the same output interfaces as a whole window. E.g., you can only joint 4
VGA interfaces or HDMI interfaces.
BNC interface does not support jointing.
3. Click to confirm jointing the screens.
125
4. (Optional) You can set the resolution for the jointed window by right-clicking on it and select
Decoding Output Configuration.
To cancel the multi-screen display, click in the upper-right corner of the display window.
12.3.3 Configuring Background
Purpose:
You can upload pictures for showing as the background of the video window.
Note: The function should be supported by the decoding device.
Steps:
1. Click to expand the Background Picture panel.
2. Select a background picture and double-click (or right-click and select Background Configuration)
it to activate the background uploading window.
3. Set a user-defined name for the background picture and click to select a picture file.
4. Click Upload to upload the picture.
5. Click and drag the configured background picture to the desired position of the video wall.
6. You can move the window when the cursor becomes and adjust its size when the cursor
becomes directional arrow. Right-click on the background picture and select Show or Hide to
126
show or hide the background picture.

Note: The picture will be displayed on the physical video wall after you upload the background.
12.3.4 Configuring Virtual LED
Purpose:
You can display the required contents on the video wall by using virtual LED.
Note: The function should be supported by the decoding device.
Steps:
1. Click Enter Video Wall Config to enter the configuration interface.
2. Click to display the Virtual LED panel, click to expand the added decoding device.
3. Click-and-drag the virtual LED to the video wall.
becomes directional arrow.
5. Right-click the virtual LED in the panel and select Virtual LED Settings to set the parameters for
it.
Content: Set the content that you want to display on the video wall.
Show Mode: Select the mode of the virtual LED as desired.
Moving Mode: Set the scrolling effect for the displayed text.
Moving Direction: Set the scrolling direction for the displayed text.
Moving Speed: Set the moving speed for the displayed text.
Font Size: Set the size of the displayed text.
Font Color: Set the color of the displayed text by clicking Color.
Background Color: Set the color of the background by clicking Color
127
12.4 Displaying Video on Video Wall

Purpose:
After the settings of the encoding device, decoding device and video wall, the video stream from the
encoding devices can be decoded and displayed on the Video Wall.
Notes:
After enable decoding and displaying, the captured picture of the video from the encoding
device displays on the Video Wall interface. And the real-time live view is shown on the physical
video wall.
For some kinds of decoder, the video stream from the signal source (which refers to the video
signal (e.g., PC) connected to the decoder via the local interfaces) can also be displayed on the
video wall. For detailed configuration, please refer to the User Manual of the device.
12.4.1 Decoding and Displaying
Steps:
1. Click Back to Operation Page to go back to the Video Wall Operation interface.
2. Click to save the linkage settings for the current scene. Or click (beside ) and select a
scene to save the settings.
Notes:
8 scenes can be set for a video wall. Each scene can be configured with different linkage
settings and window divisions.
For editing the name of a scene, select a scene and click to define a new name for it. You
can also click to clear all the settings for the scene.
3. Select a scene which is configured with linkage settings and click to enable the scene.
4. Click-and-drag the camera on the left-side list to the display window of video wall. The video
stream from the camera will be decoded and displayed on the Video Wall. You can also select a
decoding window and then double-click a camera to decode and display the video. You can also
click and hold the Ctrl or Shift key to select multiple cameras and then drag them to the video
wall.
Note: For DS-6400HDI-T and DS-6900UDI decoder, you can select the signal source on the Signal
Source panel for video wall display.
5. Select a playing window and click the icon to get a preview of the video in the lower-right
corner of the screen. Or you can directly drag a camera to the preview window for live view. You
can also double-click the preview window to get a full-screen view.
Note: You can move the mouse to the window and click in the lower-right corner to stop
decoding.
6. (Optional) Select a decoding window and click to set the window division for it. Click
to save the settings for the current scene. Or click (beside ) and select a scene to save the
settings for.
7. If the decoded camera supports PTZ control, you can click beside PTZ to activate the PTZ
control panel. For detailed configuration, please refer to Chapter 4.3 PTZ Control in Live View.
8. Right-click on a playing window to activate the decoding management menu, as shown below:
128
Note: The menu differs depending on the devices.
Stop/Start Decoding: Stop/Start the decoding.

Start/Pause Successive Decoding: Start/Pause the cycle decoding. This function is only supported by
decoder.
Refresh: Refresh the decoding.
Open/Close Digital Zoom: Enable/Disable digital zoom.
Enable Audio: Turn on/off the audio of the decoding video.
Enlarge Window: Display the window in full-screen mode.
Decoding Channel Status: View the status of the decoding channel, such as decoding status, stream
type.
Upload Logo: Upload a picture as the logo to the video window and set the display parameters for it.
After setting, the logo shows in the defined position of the window on physical video wall.
Show/Hide Logo: Show/Hide the logo.
Stick on Top: Always stick the window on the top layer.
Stick at Bottom: Always stick the window at the bottom layer.
Lock: Lock the window to disable the roaming function.
Set Alarm Window: Display the video triggered by event or alarm input on Video Wall.
Decoding Delay: Set the delay degree of the decoding according to the actual needs.
Go to Playback: Enter the playback mode. This function is only supported by decoder.
129
Icon Description
Start all the decoding
Stop all the decoding
Stop all the roaming windows
Refresh all the decoding windows
Set cycle decoding and switching interval
12.4.2 Windowing and Roaming Settings
Purpose:
Windowing is to open a new window on the screen(s). The window can be within a screen or span
multiple screens. You can move the playing window within the video wall as desired and this function
is called roaming.
Note: The windowing and roaming function should be supported by the decoding device.
Steps:
1. Click-and-drag on a screen which links to a decoding output to open a window. The window can
be within a screen or span multiple screens. If you want to open a window on the opened
window, click-and-drag and hold the Ctrl key to create one. And for the locked window (refer to
step 6), you can click-and-drag to create a new window on it.
Note: At least one camera should be selected before opening window.
becomes directional arrow. You can also hold the Shift key to scale the window in proportion.
3. During moving the window, the dotted borders will display. The window will be adjusted to align
with the borders if it is moved to the location near the dotted borders.
4. Double-click the window and it will enlarge to fill the spanning screens and display on the top
layer. You can double-click again to restore.
130
5. (Optional) Select a window and click to set the window division for it. Click to save the
settings for it.
6. Right-click on a window and select Lock in the right-click menu to disable the roaming function,
and the icon shows on the top-right corner of the window. In this way, the window cannot
be moved and resized. You can right-click on the window and select Unlock in the right-click
menu to recover the roaming function.
7. Right-click on a window and select Stop Decoding in the right-click menu, or move the mouse to
the window and click in the upper-right corner to stop the decoding of the window and it
will be closed. You can also click to close all the roaming windows.
8. The window only shows a captured picture of the decoded video. You can right-click on a
window and select Refresh in the right-click menu, or move the mouse to the window and click
in the lower-right corner to capture a latest picture of the decoded video and display on the
window.
9. If you want to view the specific area of the video in details, you can right-click on a window and
select Open Digital Zoom (if available) in the right-click menu and the cursor becomes . Use
the mouse to drag on the video to realize digital zoom. You can check the effect on the physical
video wall
10. Select a playing window and click the icon to get a preview of the video in the lower-right
corner of the screen. Or you can directly drag a camera to the preview window for live view. You
can also double-click the preview window to get a full-screen view.
11. Right-click on a playing window and you can control decoding management via the right-click
menu.
12.4.3 Configuring Playback
Purpose:
The video file is supported to be played back on the video wall.
Note: Playback function is only supported by decoder.
Steps:
1. Click-and-drag the camera on the left-side list to the display window of video wall, or you can
open a window if supported.
2. Move the mouse to the window and click in the upper-right corner. Or you can right-click on
the window and select Go to Playback in the right-click menu.
3. If there is video file of current day, the video file will be played back automatically. If not, you
can set the search condition on the search panel which shows in the left area of the interface
(click to show more search options, and then click the icon to specify the start time and
end time for the search), and click Search to find the video file.
131
4. Right-click on the playback window and you can control the playback through the right-click
menu, such as pause, stop, fast forward, slow forward, capture, start recording and full-screen
playback.
Note: The saving path for the captured pictures and recorded files can be configured on System
Configuration page. Please refer to Chapter 20.4 File Saving Path Settings for detailed settings.
When you move the mouse to the screen, the icons will display as shown below.
Icon Description
Pause the playback
Stop the playback
Capture the playback video
Record the playback video
Back to live view mode
Playback speed.
12.4.4 Configuring Cycle Decoding
Purpose:
The cycle decoding refers that you can configure multiple video streams of encoding devices to one
decoding output and you can set the switching interval for the decoding.
Note: The cycle decoding is only supported by decoder.
Steps:
1. Click beside and set the switching interval for the cycle decoding.
2. Click-and-drag the camera on the left-side list to the display window of video wall, or you can
open a window if supported.
Note: The cycle decoding is not supported by the signal source of DS-6400HDI-T and
DS-6900UDI.
3. Move the mouse to the group node and click to start cycle decoding (the decoding output
under cycle decoding will be marked with ). Right-click on the window and you can control
decoding management via the right-click menu.
132
Chapter 13 Security Control Panel

Purpose:
The Security Control Panel module provides remote control and configuration via the iVMS-4200
client software.
Note: For the users with security control panel permissions, they can enter the Security Control
Panel module to manage the security control panel and real-time alarm. For setting the user
permission of Security Control Panel module, refer to Chapter 19 Account Management.
Before you start:
Before you can remotely configure and control the security control panel, you should add device to
the software. For details about adding security control panel, refer to Chapter 3.1 Adding Device.
13.1 Configuring Zone Event

Purpose:
You can configure the event linkages, including siren, relay, client linkage and triggered cameras, for
the zones of the security control panel.
Note: The zone should be disarmed before configuring the zone event linkages.
Steps:
1. Click on the Control Panel, or click Tool -> Event Management to open the Event
Management page.
2. Click Zone Event tab.
3. Click the icon to unfold the zone list of a security control panel on the left panel.
4. Click a zone name on the list to activate the configuration of the zone event.
5. Configure the name, type and event linkages for the zone.
133
1) Edit the zone name in the Zone Name field.

2) Unfold the drop-down list of the Zone Type field and select a type.
3) Check the checkbox(es) to select the linked relay(s) on the Linked Relay panel.
4) Check the checkbox(es) to select the linked siren(s) on the Linked Siren panel.
5) Check the checkbox(es) to activate the linkage action(s) on the Trigger Client Action panel.
See the detailed actions below:
The client software gives an audible warning when alarm is triggered.
Audible Warning You can select the alarm sound for audible warning. For setting the
alarm sound, refer to Chapter 20.7 Alarm Sound Settings.
Send an email notification of the alarm information to one or more
Email Linkage
receivers.
Alarm Triggered Display the video on the Video Wall when alarm is triggered.
Video Wall Display Note: You should set the triggered camera first.
6) Select the camera(s) on the Trigger Camera panel to be triggered for popping up image or
displaying on the video wall when the alarm is triggered.
To capture the picture of the triggered camera when the selected event occurs, you should
set the capture schedule and the storage in Storage Schedule. For details, refer to Chapter
5.1 Remote Storage.
Note: Up to 4 cameras can be set as the triggered cameras.
6. Optionally, click Copy to to copy the event settings to other zones.
13.2 Remote Control

Purpose:
In this section, you can control the security control panel remotely to perform operations such as
arming, disarming, bypass, group bypass, and so on for both the partitions and zones.
Click on the Control Panel, or click View->Security Control Panel to open the Security Control
Panel page.
134
You can check the checkbox(es) of Network Security Control Panel, Video Security Control Panel, or
Panic Alarm Station to display the security control panels by type.
Or you can input the keyword on the search field to search the desired panels.
Click Refresh to update the status of security control panels.
13.2.1 Display Mode
Purpose:
The Security Control Panel module provides two display modes for showing the added security
control panel, including list mode and tile mode.
By default, the panels are shown in list mode. You can click the icon or at the upper right
corner of the page to switch the display mode between the tile or list mode.
List Mode
Click the icon , and the security control panels will display in list on the left panel of the page.
And you can click the panel name in the list to show the details of the device s partitions and zones
on the right panel.
135
Tile Mode
Click the icon , and the security control panels will tile with the icons, types, names, partitions
and zones on the page. You can click to view different partitions.
13.2.2 Partition Remote Control
Purpose:
You can remotely perform operations of away arming, stay arming, instant arming, disarming,
136
clearing alarm, group bypass, and recovering group bypass for the configured partitions.
Steps:
1. Click Operation (list mode) or (tile mode) to pop up the Partition Operation window and
control the partitions in batch.
2. Check the checkbox(es) to select the partition(s), or check the All checkbox to select all the
partitions.
3. Click the operation button (e.g., Away Arming, Stay Arming, Instant Arming, Disarm, Clear Alarm,
Group Bypass or Group Bypass Recovery) to control the selected partition(s).
(Optional) You can click Cancel to cancel applying the operations and close the Partition
Operation window.
You can also click the icon in the Status column (list mode) or the area at the right of the partition
name (tile mode) on the Security Control Panel page to show the drop-down list and select an
operation to control a single partition.
13.2.3 Zone Remote Control
Purpose:
You can remotely perform bypass, or recover bypass for the zones.
Steps:
1. Click View in the Linked Zone column (list mode) or the partition name (tile mode) to pop up
Zone Operation window.
You can view the all linked zones of the partition in this window and check the zone status.
Note: The icon will appear in the Status column on the left of the partition name if there is
fault zone in the partition or when the zone alarm is triggered. You can move the cursor to the
icon to view the detailed zone status. For the details about the triggered zone alarm, refer to
Chapter 13.4 Handling Alarms.
137
2. Check the checkbox(es) to select the zone(s), or check the Zone No. checkbox to select all the
zones.
3. Click the Bypass or Bypass Recovery button on the upper left corner of the window to control
the selected zones.
4. Click the icon in the Live View column to view the live view of the triggered camera in the
zone.
Note: You can set the triggered camera of the zone in the Event Management module. For details,
refer to Chapter 13.1 Configuring Zone Event.
13.3 Displaying Zone on E-map

Purpose:
You can add the zones on the E-map, and when the alarm in the zone is triggered, you can view the
alarm notification on the E-map and check the alarm details.
Note: For detailed operations of E-map, refer to Chapter 8 E-map Management.
Adding Zones as Hot Spots

Steps:
1. In the E-map module, click Edit Map tab at the lower left corner to enter the map editing mode.
2. Click the icon on the E-map Toolbar to open the Add Hot Spot dialog.
Or you can directly drag the zone icons from the group list on the left panel of E-map page to the
map to add the hot spots.
138
3. Check the checkbox(es) to select the zone(s) to be added.

Optionally, you can edit hot spot name, select the name color and select the hot spot icon by
The zone icon(s) will be added to the map as hot spot(s) and the icon(s) of added zone(s) in the
group list of the left panel will change from to .
You can drag the zone icon to move the hot spot to the desired location.
Modifying Hot Spots

Purpose:
the icon, etc.
Steps:
1. In the E-map module, click the Edit Map tab at the lower left corner to enter the map editing
mode.
2. Select the hot spot icon on the map and then click in the E-map Toolbar to open the Modify
Hot Spot dialog.
Or right-click the hot spot icon on the map and select Modify in the right-click menu to open the
Modify Hot Spot dialog.
Or double-click the hot spot icon on the map to pop up the Modify Hot Spot dialog.
139
You can edit the hot spot name in the text field and select the color, the icon and the linked
zone.
Previewing Hot Spots

In the E-map module, click the Map Preview tab at the lower left corner to enter the map preview
mode.
If there is any alarm triggered in the zone, an icon will appear and twinkle near the hot spot (it
will twinkle for 10s). Click the alarm icon, or right-click the hot spot icon and select Display Alarm
Information, to check the alarm information, including alarm type and triggered time.
Notes:
To display the alarm information on the map, the Alarm on E-map functionality needs to be set
as the alarm linkage action. For details, refer to Chapter 13.1 Configuring Zone Event.
You can also check the zone alarm information in the Real-time Alarm module. For details, refer
to Chapter 13.4 Handling Alarms.
To clear the alarm information displayed on the map, you can click on the toolbar, or right-click
the zone icon and select Clear Alarm Information to clear the alarms of the selected zone.
13.4 Handling Alarms

Purpose:
In this section, you can view the real-time triggered CID alarm information of the security control
panel and handle alarms. And you can also search the history alarms by time or by alarm type.
140
13.4.1 Real-time Alarm
Purpose:
You can check the real-time triggered alarm information, including alarm type, alarm time, device
name, CID code, zone, partition, alarm description, etc. You can also subscribe and acknowledge the
alarms, or check the triggered cameras live view and view the linked hot spots on the E-map.
Steps:
1. Click on the Control Panel, or click View->Real-time Alarm to open the Real-time Alarm
page.
All the real-time triggered alarms will display on this page and you can check the alarm type,
alarm time, device name, user, CID code, zone, partition, alarm description and so on.
You can check the Alarm, Exception, Restore or Operation checkbox(es) to show the alarms in
corresponding type(s).
Notes:
The Alarm type is marked with ; the Exception type is marked with ; the Restore type
is marked with ; and the Operation type is marked with .
The number after the alarm type indicates the alarm quantity of this type.
2. Click the icon in the Operation column to acknowledge the selected alarm.
Or you can click the Acknowledge in Batch button to acknowledge all the real-time triggered
alarms.
The acknowledged alarm will disappear from the list.
3. (Optional) Click the icon in the Operation column to view the live view of the triggered
cameras.
Note: Before you can get the linked live view, you should configure triggered cameras for the
zone. For details about setting triggered cameras, refer to Chapter 13.1 Configuring Zone Event.
141
4. (Optional) Click the icon in the Operation column to check the zone as hot spot on the
map.
Note: Before you can check the zone on the map, you should add the zone as hot spot to the
map. For details about adding zone as hot spot, refer to Chapter 13.3 Displaying Zone on E-map.
5. (Optional) You can also subscribe the alarm types in this module to receiving desired alarms.
Steps:
1) Click the Subscribe button to pop up the Subscribe dialog.
2) Click Alarm, Exception, Restore or Operation tab to select the major alarm type(s).
3) Check the checkbox(es) under the tab to select the minor alarm type(s).
You can also check All checkbox to select all the minor types in the corresponding major
type.
4) Click OK to save the selections.
13.4.2 Searching History Alarms
Purpose:
In this section, you can search the history alarms by time and filter the searching results by alarm
type. You can also handle the matched alarms.
In the Real-time Alarm module, click History Alarm tab to enter the History Alarm page.
142
Steps:
1. Click the icon to set the start time and end time of a time period.
2. Click Search button and the matched alarms will display on this page.
3. (Optional) Filter the searching results by alarm type.
1) Click Filter button to pop up the Filter dialog.
2) Click Alarm, Exception, Restore or Operation tab to select the major alarm type(s).
Note: The Alarm type is marked with ; the Exception type is marked with ; the
Restore type is marked with ; and the Operation type is marked with .
3) Check the checkbox(es) under the tab to select the minor alarm type(s).
You can also check All checkbox to select all the minor types in the corresponding major
type.
4) Click OK to start filtering by alarm types and the alarms of the selected types will list on
this page.
4. (Optional) For the searched alarms, click the icon or click the Acknowledge in Batch button
to acknowledge the unacknowledged alarms, and the acknowledged alarm items will turn to
gray.
You can also click and to check the linked live view of the alarms and view the linked
hot spots on the e-map.
For details about operating the alarms, refer to Chapter 13.4.1 Real-time Alarm.
13.4.3 Handling Panic Alarm
Purpose:
For the pole panic alarm station, when the panic alarm is triggered, you can handle the alarm via the
client.
Steps:
1. When the user calls the center via panic alarm station, the panic alarm is triggered. The
143
following window will pop up.
You can view the live video.

The following icons are available on the toolbar.
Icon Name
Answer
Refuse
Waiting
Turn On Alarm Lamp
Volume In
Volume Out
2. You can click to answer the call.
3. Right-click on the live view window to open the right-click menu.
The following buttons are available
Icon Name
Capture Capture the picture in the live view process.
Start/Stop the manual recording. The video file is
Start/Stop Recording
stored in the PC.
If the zone is linked to the speed dome, you can
enable PTZ control function on the display window.
Open PTZ Control Click again to disable the function.
Note: For setting the triggered camera, refer to
Chapter 13.1 Configuring Zone Event.
144
Chapter 14 Pyronix Control Panel

Purpose:
Pyronix cntrol panel can be added to the client for management and control. You can control the
partitions, zones, and alarm outputs of the added Pyronix control panel. After setting the zone event
for the Pyronix control panel, the client can receive the alarms triggered by Pyronix control panel
when the device is in alarm mode.
You can also add the zone of Pyronix control panel to the E-map, and when the alarm in the zone is
triggered, you can view the alarm notification on the E-map and check the alarm details. For detailed
operations for adding zone to E-map, refer to Chapter 13.3 Displaying Zone on E-map.
You can also search the operation logs stored in Pyronix control panel. For details, refer to Chapter 18
Log Management.
Note: For the users with Pyronix control panel permissions, they can enter the Pyronix Control Panel
module to manage the Pyronix control panel and real-time alarm. For setting the user permission of
Pyronix Control Panel module, refer to Chapter 19 Account Management.
14.1 Device Management

Purpose:
You can add the Pyronix control panel to the client in Device Management module. The device can
be managed and controlled via the client once it is authorized by the device administrator on the
PyronixCloud service.
14.1.1 Adding Pyronix Control Panel
Perform the following steps to add the Pyronix control panel.

Steps:
1. Click icon on the control panel,

or click Tools->Device Management to open the Device Management page.
2. Click Device tab to enter the following interface.
145
3. Click Add New Device Type to pop up the following dialog box.
4. Check Pyronix Control Panel checkbox and click OK.

The Pyronix control panel will display in the device type panel.
5. Click Pyronix Control Panel to enter the Pyronix control panel management interface.
6. Click Add.
7. In the pop up dialog box, input the required information for adding a Pyronix control panel.
146
Nickname: Set a nickname for the device as you want.

Client User Name: Set the user name which is used for applying the permission from
PyronixCloud.
Note: See Chapter 14.1.2 Authorizing iVMS-4200 via PyronixCloud for details.
System ID: The system ID of the Pyronix control panel. It is a unique serial number for each
control panel.
Note: You can get the control panel ID via the device. For details, refer to the specified
device user manual.
App Password: The password used to identify the control panel together with the ID on the
user cloud account.
Note: The App password should be set via the device. For details, refer to the specified
device user manual.
User Code: The code for every user with different priorities to arm/disarm the control
panel and perform allowed operations.
Note: You should set the user code via the device. For details about setting the user code,
refer to the specified device user manual.
You can import all the zones of the Pynonix control panel to the corresponding group by default.
9. Click Add to add the Pyronix control panel.
10. (Optional) To edit the device parameters, you can select the device and click Modify.
11. (Optional) To delete the added device, select the device and click Delete.
If it is the first time you add the Pyronix control panel to your client, after adding the Pyronix control
panel, its network status is offline. You cannot manage and operate it via the control client until the
administrator authorizes the client via the PyronixCloud.
What to do next: You should contact the administrator to authorize the client via the PyronixCloud.
For details, refer to Chapter 14.1.2 Authorizing iVMS-4200 via PyronixCloud.
14.1.2 Authorizing iVMS-4200 via PyronixCloud
Purpose:
For the administrator, you need to login the PyronixCloud website to authorize the client so that the
user can operate and control the Pyronix control panel via iVMS-4200.
147
Note: For one computer, you should ask for authorization if it is the same time adding the Pyronix
control panel.
Creating PyronixCloud Account
Purpose:
Before you can authorize the phone, you need to register a PyronixCloud account and connect the
Pyronix control panel to PyronixCloud.
Steps:
1. Go to www.pyronixcloud.com via PC to register an account.
2. Click Create an account and complete the form.

Note: Once the form is completed, you will receive an email from admin@pyronixcloud.com
with a confirmation link. Click this link and you can continue on to PyronixCloud and connect
your device.
3. Return to PyronixClound home page and login.
Connecting Device to PyronixCloud
Steps:
1. Input the Pyronix control panel s system ID in the System ID field.
2. Input the cloud password that you entered in the Pyronix device.
3. Click Submit.
4. Input a system reference to set a different name for the device.
5. Click Submit to compete the operation.
Notes:
The system ID is the device unique ID. You can get the system ID via the device. For details,
refer to the specified device user manual.
148
The cloud password should be set via the device. For details, refer to the specified device
user manual.
After clicking the Submit button, you will receive an email. Click the confirmation link in the
email to continue.
The control panel will be appeared on View Systems interface. You can click the tick at the
upper-right corner of the interface to make sure the device is connected successfully.
Authorizing iVMS-4200
Steps:
1. In the View Systems interface, click a user in the User column and make sure the user is from the
client that you want to authorize.
Note: The user name in the User column is the client user name you input when adding the
Pyronix control panel. See Chapter 14.1.1 Adding Pyronix Control Panel for details.
2. Click the permission icon next to the selected user
3. Click Save Now to save the settings.
The icon will turn to .
Then you can access the device via the client successfully.
14.1.3 Setting Working Mode
Purpose:
You can set the working mode of Pyronix control panel by clicking Switch to Alarm Mode or Switch
to Operation Mode to alarm mode or operation mode according to actual needs.
Alarm Mode: In this mode, the client can receive the triggered alarm of the Pyronix control
panel.
Note: If you switch to alarm mode, the net status of the device will turn to offline.
Operation Mode: In this mode, you can operate and control the Pyronix control panel, including
arming/disarming, bypass/bypass recovery, alarm output control, etc.
149
14.2 Configuring Event

Purpose:
You can configure the client linkage and triggered cameras for the triggered events of Pyronix control
panel s zones, or for the device event of Pyronix control panel.
Steps:
1. Click on the Control Panel, or click Tool -> Event Management to open the Event
Management page.
2. Click Pyronix Control Panel Event tab.
The added Pyronix control panel is displayed in the list on the left.
3. Click to unfold the zone list and select the zone icon to configure its zone event linkage.
You can also click the Pyronix Control Panel s icon to configure its device event linkage.
4. In the Trigger Camera field, select the camera to be triggered for popping up image when the
alarm is triggered.
To capture the picture of the triggered camera when the selected event occurs, you should set
Remote Storage.
Note: Up to one camera can be set as the triggered camera.
5. Check Trigger Client Action checkbox to activate the client linkage actions.
You can check the detailed actions as the client linkage. See the detailed actions below for
details:
The client software gives an audible warning when alarm is triggered.
Audible Warning You can select the alarm sound for audible warning. For setting the
alarm sound, refer to Chapter 20.7 Alarm Sound Settings.
Send an email notification of the alarm information to one or more
Email Linkage
receivers.
Display the zone s alarm information on the E-map.
Alarm on E-map
Note: This linkage is only available for device event.
6. Optionally, click Copy to to copy the event settings to other zones.
150
14.3 Remote Control

Purpose:
In this section, you can control the Pyronix control panel remotely to perform operations such as
arming, disarming, bypass, bypass recovery, and so on for partitions and zones. You can also control
the alarm output connected to the Pyronix control panel.
Note: You can control the Pyronix control panel remotely after you switch the device to operation
mode.
Click on the Control Panel, or click View->Pyronix Control Panel to open the Pyronix Control
Panel page.
14.3.1 Partition Remote Control
Purpose:
You can arm and disarm the partition of the added Pyronix control panel. The status of the partitions
will be displayed in real-time.
Steps:
1. Click on the Control Panel, or click View->Pyronix Control Panel to open the Pyronix
Control Panel page as follows.
All the added Pyronix control panels and partitions will be displayed.
Note: The device name will turn grey if it is offline.
2. (Optional) You can click to edit the partition name as you want.
3. Click on the switch of each partition to control its status.
The following table shows the icons and corresponding partition statuses.
Icon Status
The partition is disarmed.
and Twinkle The partition is being armed.
The partition is armed.
and Twinkle The partition is armed and is in alarm.
151
You can click on the twinkled alarm icon to

clear alarm and it will turn to be disarmed.
14.3.2 Zone Remote Control
Purpose:
You can view the zone real-time status of the added Pyronix control panel and perform bypass and
bypass recovery operations to control the zone.
Steps:
1. Click Zone to enter the zone control interface as follows.
The zones will be displayed.

You can view the zone details including zone No., name, and its location.
The zone s bypass status and running status are displayed in real-time.
2. (Optional) You can select the zone and click Modify to edit the zone name as you want.
3. To bypass the zone, select the zone and click Bypass.
To recover the bypass, select the zone and click Bypass Recovery.
14.3.3 Alarm Output Remote Control
Purpose:
When the Pyronix control panel is connected with alarm outputs, such as siren, alarm lamp, etc., you
can also control the alarm output status.
Steps:
1. Click Alarm Output to enter the alarm output control interface as follows.
152
Its connected alarm outputs will be displayed.

You can view the alarm output details including No., name, type, and pulse duration.
The alarm output s running status is displayed in real-time.
2. (Optional) You can select the alarm output and click Modify to edit the alarm output name as
you want.
3. To turn on the alarm output, select the alarm output and click Open.
To turn off the alarm output, select the alarm output and click Close.
153
Chapter 15 Access Control

Purpose:
The Access Control module is applicable to access control devices and video intercom. It provides
multiple functionalities, including person and card management, permission configuration, access
control status management, video intercom, and other advanced functions.
You can also set the event configuration for access control and display access control points and
zones on E-map.
Note: For the user with access control module permissions, the user can enter the Access Control
module and configure the access control settings. For setting the user permission of Access Control
module, refer to Chapter 19 Account Management.
Click to enter the Access Control Module as follows:
Before you start:

For the first time opening the Access Control module, the following dialog will pop up and you are
required to select the scene according to the actual needs.
Non-residence: You can set the attendance rule when adding person, while set the access control
parameters.
Residence: You cannot set the attendance rule when adding person.
Note: Once the scene is configured, you cannot change it later.
154
The Access Control module is composed of the following sub modules.

Managing the organizations, persons, and assigning cards to
Person and Card
persons.
Configuring the week schedule, holiday group, and setting the
Schedule and Template
template.
Assigning access control permissions to persons and applying to
Permission
the devices.
Providing advanced functions including access control
parameters settings, card reader authentication, opening door
Advanced Function
with first card, anti-passing back, multi-door interlocking, and
authentication password.
Video intercom between client and resident, searching the dial
Video Intercom
log, and releasing notice.
Searching history events of access control; Searching call logs,
Search
unlocking logs, and released notices.
Managing the access control devices and video intercom
Device Management
devices.
Note: In this chapter, we only introduce the operations about access control. For detailed operations
about video intercom, refer to Chapter 17 Video Intercom.
15.1 Access Control Device Management

Before you start:
You can add and manage the access control devices in Device Management, or in Access Control ->
Device Management module. For details about adding device, refer to Chapter 3.1 Adding Device.
15.1.1 Viewing Device Status
In the device list, You can view the door status, host status, card reader status, alarm input status,
alarm output status, arming status, DIP information, general status, active infrared intrusion detetion
status, and component status.
155
Note: The interface may different from the picture displayed above. Refer to the actual interface
when adopting this function.
Status Name Description
Door Status View the device door s status.
Host Status View the device host s status, including the device power supply
status, anti-passing back status, host tampering status, etc.
Card Reader Status View the card reader s status, including the online status, the
tampering status, and the authentication method.
Alarm Input Status View the alarm input s status.
Alarm Output Status View the alarm output s status.
Event Sensor Status View the event sensor s status.
Arming Status View the arming device s IP address and its arming type.
DIP Information View the device local DIP information.
General Status View the device general status, including the BUS synchronization
status, IR people counting for entrance, authenticated people
counting for entrance, etc.
Active Infrared Intrusion View the status of active infrared intrusion detector, receiving
Detector Status board, etc.
Component Status View the device components status, including the status of the
motor sensor, brake status, etc.
15.1.2 Editing Basic Information
Purpose:
After adding the access control device, you can edit the device basic information.
Steps:
1. Select the device in the device list.
2. Click Modify to pop up the modifying device information window.
3. Click Basic Information tab to enter the Basic Information interface.
156
4. Edit the device information, including the adding mode, the device name, the device IP address,
port No., user name, and the password.
15.1.3 Network Settings
Purpose:
After adding the access control device, you can set the uploading mode, and set the network center
and wireless communication center.
Select the device in the device list, and click Modify to pop up the modifying device information
window.
Note: The function should be supported by the device.
Click Network Settings tab to enter the network settings interface.
Log Uploading Mode Settings
Purpose:
You can set the mode for uploading logs via EHome protocol.
Steps:
1. Click the Uploading Mode tab.
2. Select the center group in the dropdown list.

157
3. Check the Enable checkbox to enable the selected center group.

4. Select the uploading mode in the dropdown list. You can enable N1/G1 for the main channel
and the backup channel, or select Close to disable the main channel or the backup channel.
Note: The main channel and the backup channel cannot enable N1 or G1 at the same time.
5. Click Save button to save parameters.
Network Center Settings
You can set the account for EHome protocol in Network Settings page. Then you can add devices via
EHome protocol.
Steps:
1. Click the Network Center tab.

3. Select the Address Type as IP Address or Domain Name.
4. Input IP address or domain name according to the address type.
5. Input the port No. for the protocol. By default, the port No. is 7660.
6. Select the protocol type as EHome.
7. Set an account name for the network center.
Note: The account should contain 1 to 32 characters and only letters and numbers are allowed.
Notes:
The port No. of the wireless network and wired network should be consistent with the port No.
of EHome.
You can set the domain name is Enable NTP area of Editing Time Section in Remote
Configuration. For details, refer to Editing Time in Chapter 15.1.6 Authenticating M1 Card
Encryption
Before you start:
You should use the specified Hikvision card enrollment station to issue card. For details, refer to
Adding Person (Card) in Chapter 15.3.1 Adding Person.
Purpose:
The M1 Card Encryption function increases the authentication security level, which should be
applied together with the card enrollment station of our company via the client software or the web
client. After issuing the card, you can set the M1 card encryption function on the controller.
Note: The function should be supported by the access control device and the card reader.
158
Steps:
1. Select the device in the device list, and click Modify to pop up the modifying device information
window.
2. Click M1 Card Encryption tab to enter the M1 Card Encryption interface.
3. In the M1 Card Encryption interface, check Enable checkbox to enable the M1 card encryption
function.
4. Set the sector ID.

Note: The sector ID ranges from 1 to 100.
Remote Configuration.
Wireless Communication Center Settings
Steps:
1. Click the Wireless Communication Center tab.
2. Select the APN name as CMNET or UNINET.

3. Input the SIM Card No.
5. Input the IP address and port No.
6. Select the protocol type as EHome. By default, the port No. for EHome is 7660.
7. Set an account name for the network center. A consistent account should be used in one
platform.
Note: The port No. of the wireless network and wired network should be consistent with the port No.
of EHome.
15.1.4 Capture Settings
You can set the parameters of capture linkage and manual capture.
159
window.
Click Capture Settings tab to enter the capture settings interface.
Notes:
The Capture Settings should be supported by the device.
Before setting the capture setting, you should configure the storage server for picture storage.
For details, refer to Chapter 5.1 Remote Storage.
Linked Capture
Steps:
1. Select the Linked Capture tab.
2. Set the picture size and quality.

3. Set the linked capture times once triggered.
4. Set the capture interval according to the capture times.
Manual Capture
Steps:
1. Select the Manual Capture tab.
2. Select the resolution of the captured pictures from the dropdown list.
3. Select the picture quality as High, Medium, or Low.
5. You can click Restore Default Value to restore the parameters to default settings.
160
15.1.5 RS-485 Settings
Purpose:
You can set the RS-485 parameters including the serial port, the baud rate, the data bit, the stop bit,
the parity type, the communication mode, and the working mode.
window.
Click RS-485 Settings tab to enter the RS-485 settings interface.
Note: The RS-485 Settings should be supported by the device.
Steps:
1. Click RS-485 Settings tab to enter the RS-485 settings interface.
2. Select the serial No. of the port from the dropdown list to set the RS-485 parameters.
3. Set the baud rate, data bit, the stop bit, parity, flow control, communication mode, and working
mode in the dropdown list.
4. Click Save to save the settings and the configured parameters will be applied to the device
automatically.
Note: After changing the working mode, the device will be rebooted. A prompt will be popped up
after changing the working mode.
15.1.6 Authenticating M1 Card Encryption
Before you start:

You should use the specified Hikvision card enrollment station to issue card. For details, refer to
Adding Person (Card) in Chapter 15.3.1 Adding Person.
Purpose:
The M1 Card Encryption function increases the authentication security level, which should be
applied together with the card enrollment station of our company via the client software or the web
client. After issuing the card, you can set the M1 card encryption function on the controller.
Note: The function should be supported by the access control device and the card reader.
Steps:
6. Select the device in the device list, and click Modify to pop up the modifying device information
window.
7. Click M1 Card Encryption tab to enter the M1 Card Encryption interface.
8. In the M1 Card Encryption interface, check Enable checkbox to enable the M1 card encryption
161
function.
9. Set the sector ID.

Note: The sector ID ranges from 1 to 100.
15.1.7 Remote Configuration
Purpose:
In the device list, select the device and click Remote Configuration button to enter the remote
configuration interface. You can set the detailed parameters of the selected device.
Checking Device Information
Steps:
1. In the device list, you can click Remote Configuration to enter the remote configuration
interface.
2. Click System -> Device Information to check the device basic information and the device
version information.
Editing Device Name
In the Remote Configuration interface, click System -> General to configure the device name and
162
overwrite record files parameter. Click Save to save the settings.
Editing Time
Steps:
1. In the Remote Configuration interface, click System -> Time to configure the time zone.
2. (Optional) Check Enable NTP and configure the NTP server address, the NTP port, and the
synchronization interval.
3. (Optional) Check Enable DST and configure the DST star time, end time and the bias.
Setting System Maintenance
Purpose:
You can reboot the device remotely, restore the device to default settings, import configuration file,
upgrade the device, etc.
Steps:
1. In the Remote Configuration interface, click System -> System Maintenance.
2. Click Reboot to reboot the device.
Or click Restore Default Settings to restore the device settings to the default ones, excluding
the IP address.
163
Or click Restore All to restore the device parameters to the default ones. The device should be
activated after restoring.
Note: The configuration file contains the device parameters.
3. You can also remote upgrade the device.
1) In the Remote Upgrade part, select Controller Upgrade File, Card Reader Upgrade File or
Upgrade File of Lange Controller from the drop down list.
2) Upgrade File of Lange Controller from the drop down list.
Controller Upgrade File: Upgrade access controller.
Card Reader Upgrade File: Upgrade card reader. Only card readers connected via RS-485
can be upgraded remotely.
Upgrade File of Lane Controller: Select master lane controller or slave lane controller to
upgrade.
3) Click to select the upgrade file.
4) Click Upgrade to start upgrading.
Setting RS-485 Parameters
You can set the RS-485 parameters in this page.
164
Notes:
Supports 9 peripherals: ID card reader, IC card reader, QR code scanner, fingerprint and card
reader, QR code scanner and text screen, text screen, card recycler, fingerprint reader, and ID
card identification terminal.
If selecting ID card reader, QR code scanner, card recycler, text screen, or fingerprint reader as
the peripheral, you should set the accessing direction.
If selecting IC card reader or fingerprint reader as the peripheral, you should set accessing
direction by setting the DIP switch.
The system supports 2 authentication centers: Device and Client.
The authentication center type Client is mainly adopted by developers of the third party
software.
Managing Network User
Steps:
1. In the Remote Configuration interface, click System -> User -> Network User.
2. Click Add to add the user (Do not support by the elevator controller.).
Or select a user in the user list and click Edit to edit the user. You are able to edit the user
password, the IP address, the MAC address and the user permission. Cilck OK to confirm editing.
165
Managing Remote Control User
Purpose:
You can match the remote control s code in this page. After the code is matched, you can control the
device by the remote control.
Steps:
1. In the Remote Configuration interface, click System -> User -> Remote Control User.
2. Click Add to add the user.
3. Check Enable in the pop-up window and set the remote control s serial No.
4. (Optional) Enable the Remian Open Status of the swing barrier.
Note: If enabling this function, after the remote control matching completed, you can control
the baffle remaining open by using the remote control.
5. Set the door open direction.
Note: You can add up to 32 remote control users.
Setting Security
Purpose:
You can set the security parameters when logging in the device.
Steps:
1. Click System -> Security.
2. Select the encryption mode in the dropdown list.

You can select Compatible Mode or Encryption Mode.
166
Configuring Lane Parameters
Purpose:
You can set the passing parameters for a person to pass through the device, including the alarm
triggering delay time and Triggering IR timeout period.
Click System -> Lane Settings and set the parameters. Click Save to save the settings.
The parameters descriptions are as follows:
Max. Intrusion Duration: If a person has entered the lane or passed through the lane for more
than the configured time duration, an alarm will be triggered. 0
represents the function is disabled.
Note: The suggested minimum detection time duration is 2s.
Max IR Obstructed Duration: Set the maximum time duration for the obstruction of the IR light. If
the IR light is obstructed for more than the configured time
duration, the alarm will be triggered. 0 represents the function is
disabled.
Configuring Screen Parameters
Purpose:
The device can connect to a text screen. You can set the display parameters on this page.
Click System -> Text Screen Settings and set the parameters. Click Save to save the settings.
Note: For better performance, we suggest you to use the default parameters.
Screen Position:
If select Exit from the drop-down list, the screen will be installed at the exit
position of the device.
Screen Model: Select the screen model from the drop-down list.
Font Size: Select the text font size in the screen.
Text Orientation: Select the text orientation on the screen.
167
Line Spacing: Set the space between two lines.
Word Spacing: Set the space between two words.
Initial Position: Set the first character s position displayed on the screen.
Configuring People Counting Parameters
Purpose:
You can set the people counting s parameters and after the configuration.
Click System -> People Counting and set the parameters. Click Save to save the settings.
Clear Counted Number: Click Clear and the counted people number will be restored to zero.
Device People Counting: Click Enable or Disable to enable or disable the people counting
function.
Offline People Counting: Click Enable or Disable to enable or disable function of the offline
people counting on the client.
If enabling the function and if the device is offline, the device will
continue counting the people and the number will be stored in the
device. When the device is online, the client will read the updated
number from the device automatically.
People Counting Type: You can select from Invalid, By IR Detection, and By Authentication
Number.
None: The device will not count people.

If the device people counting function is enabled, the people
counting function is still disabled.
By IR Detection: The device will count the people who passing through the
device depending on the IR detection.
168
By Authentication The device will count the people who authenticating on the
Number: device.
The failed authentication will also count as once.
Configuring Network Parameters
Click Network -> General. You can configure the NIC type, the IPv4 address, the subnet mask (IPv4),
the default gateway (IPv4), MTU address, and the device port. Click Save to save the settings.
Configuring Advanced Network
Click Network -> Advanced Settings. You can configure the DNS 1 IP address and the DNS 2 IP
address. Click Save to save the settings.
169
Configuring Zone Parameters
Steps:
1. Click Alarm -> Zone.
You can view the zone parameters.
2. Click to pop up the Zone Settings window.

3. Set the zone name, the zone detector type, the zone type, the sensitivity value, the linked
trigger and other parameters.
4. Click Save to save the paramters.
Or click Copy to to copy the relay information to other relays.
Configuring Relay Parameters
Steps:
1. Click Alarm -> Relay.
You can view the relay parameters.
2. Click the to pop up the Relay Parameters Settings window.

3. Set the relay name and the output delay.
4. Click Save to save the paramters.
Or click Copy to to copy the relay information to other relays.
Configuring Lane Controller Alarm Output
Purpose:
You can set the lane controller s relay parameters.
Steps:
1. In the Remote Configuration interface, click Alarm -> Lane Controller.
170
You can view the controller type, the relay, and the output delay information.
2. Click to pop up the Configuring Relay Parameters window.

3. Set the output delay time duration.
Configuring Audio File
Purpose:
You can relate the audio file to the corresponding playing scene. You can also export the audio file
from the system and impor the audio file from the local.
Steps:
1. Click Other -> Audio File to enter the Audio File page.
Note: By default, the system contains the audio content. For details about the index related
audio content, see Appendix B Table of Audio Index Related Content.
2. Select the index (the playing content) corresponded play scene.
171
3. (Optional) Input the descrptions of the play scene.

4. Click Save Parameters to save the relationship between the index (the playing content) and the
play scene.
5. (Optional) Click Export to export the default audio file to the local computer.
6. (Optional) Clic and select audio file from the local computer. Click Import to import the file to
the device.
Notes:
The imported audio file should be in MEM format.
For details about converting other format of the audio file to MEM format, see the audio
conversion manual.
Operating Zone
Purpose:
You can arm/disarm the zone.
Click Operation -> Zone to enter the Zone Operation page. Check a zone and click Arm or Disarm to
control the zone.
Operating Relay
Steps:
1. Click Operation -> Relay.
You can view the relay status.
2. Check the relay checkbox
3. Click Open or Close to open/close the relay.
4. (Optional) Click Refresh to refresh the relay status.
172
Configuring Lane Controller Alarm Output
Purpose:
Open or close the lane controller alarm output s relay.
Steps:
1. Click Operation -> Lane Controller to enter the Configuring Lane Controller page.
2. Check the target relay checkbox.

3. Click Open or Close to open or close the relay.
4. (Optional) Click Refresh to refresh the relay status.
Viewing Zone Status
Click Status -> Zone to view the zone status.
Viewing Relay Status
Click Status -> Relay to view the relay status.
173
15.2 Organization Management

Purpose:
You can add, edit, or delete the organization as desired.
Click tab to enter the Person and Card Management interface.
15.2.1 Adding Organization
Steps:
1. In the organization list on the left, you should add a top organization as the parent organization
of all organizations.
Click Add button to pop up the adding organization interface.
2. Input the Organization Name as desired.

3. Click OK to save the adding.
4. You can add multiple levels of organizations according to the actual needs.
To add sub organizations, select the parent organization and click Add.
Repeat Step 2 and 3 to add the sub organization.
Then the added organization will be the sub-organization of the upper-level organization.
Note: Up to 10 levels of organizations can be created.
15.2.2 Modifying and Deleting Organization
You can select the added organization and click Modify to modify its name.
You can select an organization, and click Delete button to delete it.
Notes:
The lower-level organizations will be deleted as well if you delete an organization.
Make sure there is no person added under the organization, or the organization cannot be
deleted.
15.3 Person Management

After adding the organization, you can add person to the organization and manage the added person
such as issuing cards in batch, importing and exporting person information in batch, etc.
Note: Up to 10,000 persons or cards can be added.
174
15.3.1 Adding Person
Adding Person (Basic Information)
Steps:
1. Select an organization in the organization list and click Add button on the Person panel to pop
up the adding person dialog.
2. The Person No. will be generated automatically and is not editable.

3. Input the basic information including person name, gender, phone No., birthday details, and
email address.
4. Click Upload Picture to select the person picture from the local PC to upload it to the client.
Note: The picture should be in *.jpg format.
5. (Optional) You can also click Take Phone to take the person s photo with the PC camera.
6. Click OK to finish adding.
Adding Person (Detailed Information)
Steps:
1. In the Add Person interface, click Details tab.
175
2. Input the detailed information of the person, including person s ID type, ID No., country, etc.,
according to actual needs.
Linked Device: You can bind the indoor station to the person.
Note: If you select Analog Indoor Station in the Linked Device, the Door Station field will
display and you are required to select the door station to communicate with the analog
indoor station.
Room No.: You can input the room No. of the person.
Adding Person (Permission)
You can assign the permissions (including operation permissions of access control device and access
control permissions) to the person when adding person.
Note: For setting the access control permission, refer to Chapter 15.5 Permission Configuration.
Steps:
1. In the Add Person interface, click Permission tab.
2. In the Device Operation Role field, select the role of operating the access control device.
Normal User: The person has the permission to check-in/out on the device, pass the access
control point, etc.
Administrator: The person has the normal user permission, as well as permission to configure
the device, including adding normal user, etc.
3. In the Permission(s) to Select list, all the configured permissions display.
Check the permission(s) checkbox(es) and click > to add to the Selected Permission(s) list.
176
(Optional) You can click >> to add all the displayed permissions to the Selected Permission(s) list.
(Optional) In the Selected Permission(s) list, select the selected permission and click < to remove
it. You can also click << to remove all the selected permissions.
Adding Person (Card)
You can add card and issue the card to the person.
Adding General Card
Steps:
1. In the Add Person interface, click Card tab.
2. Click Add to pop up the Add Card dialog.

3. Click Card to enter the Card tab.
4. Select the card type according to actual needs.

Normal Card
177
Card for Disabled Person: The card is for the disabled person.
Card in Blacklist: The card swiping action will be uploaded and the door cannot be opened.
Patrol Card: The card swiping action can used for checking the working status of the
inspection staff. The access permission of the inspection staff is configurable.
Duress Card: The door can open by swiping the duress card when there is duress. At the
same time, the client can report the duress event.
Super Card: The card is valid for all the doors of the controller during the configured
schedule.
Visitor Card: The card is assigned for visitors. For the Visitor Card, you can set the Max.
Swipe Times.
Notes:
The Max. Swipe Times should be between 0 and 255. When setting as 0, it means the
card swiping is unlimited.
Up to 3000 visitor cards can be added.
5. Input the password of the card itself in the Card Password field. The card password should
contain 4 to 8 digits.
Note: The password will be required when the card holder swiping the card to get enter to
or exit from the door if you enable the card reader authentication mode as Card and Password,
Password and Fingerprint, and Card, Password, and Fingerprint. For details, Chapter 0 Lane
Controller Parameters
Steps:
1. In the device list on the left, click to expand the door, select a lane controller and you can
edit the lane controller s parameters on the right.
2. You can edit the following parameters:

Passing Mode: Select the controller which will control the barrier status of the device.
If select According to Lane Controller s DIP Settings, the device will follow the lane
controller s DIP settings to control the barrier. The settings on the software system will be
invalid.
If select According to Main Controller s Settings, the device will follow the settings of the
software system to control the barrier. The DIP settings of the lane controller will be
invalid.
Note: For details about setting the barrier status, see 15.9.2 Controlling Door Status.
Enable Free Passing Authentication: If check the checkbox, when both entrance and exit s
barrier mode is Remain Open, the pedestrians should authenticate each time passing
through the lane. Or an alarm will be triggered.
Open/Close Door Speed: Set the barrier s open and close speed. You can select from 1 to
10. The greater the value, the faster the speed.
Alarm Audio Prompt Time Duration: Set the alarm audio prompt playing duration.
178
Note: 0 refers to the alarm audio will be played until the alarm is ended.
Temperature Unit: Select the temperature unit that displayed in the device status.
Note: For details about viewing device status, see 15.1.1 Viewing Device Status.
3. Click Save to save the lane controller s parameters.
Card Reader Authentication.
6. Click to set the effective time and expiry time of the card.
7. Select the Card Reader Mode for reading the card No.
Access Controller Reader: Place the card on the reader of the Access Controller and click
Read to get the card No.
Card Enrollment Station: Place the card on the Card Enrollment Station and click Read to
get the card No.
Note: The Card Enrollment Station should connect with the PC running the client. You can
click Set Card Enrollment Station to enter the following dialog.
1) Select the Card Enrollment Station type.

Note: Currently, the supported card reader types include DS-K1F100-D8, DS-K1F100-M,
DS-K1F100-D8E, and DS-K1F180-D8E.
2) Set the parameters about the connected card enrollment station.
If the card is M1 card, and if you need to enable the M1 Card Encryption function, you
should check Enable checkbox of M1 Card Encryption and click Modify to select the
sector.
Note: The M1 Card Encryption function is supported by DS-K1F100-D8, DS-K1F100-D8E,
and DS-K1F180-D8E.
3) Click Save button to save the settings.
You can click Restore Default Value button to restore the defaults.
Manually Input: Input the card No. and click Enter to input the card No.
8. Click OK and the card(s) will be issued to the person.
9. (Optional) You can select the added card and click Modify or Delete to edit or delete the card.
10. (Optional) You can generate and save the card QR code for QR code authentication.
1) Select an added card and click QR Code to generate the card QR code.
2) In the QR code pop-up window, click Download to save the QR code to the local PC.
You can print the QR code for authentication on the specified device.
Note: The device should support the QR code authentication function. For details about
setting the QR code authentication function, see the specified device user manual.
179
11. (Optional) You can click Link Fingerprint to link the card with the person s fingerprint, so that the
person can place the finger on the scanner instead of swiping card when passing the door.
12. (Optional) You can click Link Face Picture to link the card with the face picture, so that the
person can pass the door by scanning the face via the device instead of swiping card when
passing the door.
Adding Smart Card
Purpose:
You can store fingerprints and ID card infomration in the smart card. When authenticating, after
swiping the smart card on the device, you can scan your fingerprint or swipe your ID card on the
device. The device will compare the fingerperint or ID card information in the smart card with the
ones collected. If you use the smart card for authentication, there is no need to store the fingerprints
or ID card information in the device in advance.
Steps:
1. In the Add Person page, set the person basic information.
2. Click Card to enter the card tab.
3. Click Add to pop up the Add Card dialog.
4. Click Smart Card to enter the Smart Card tab.
5. Select an issuing card mode from the dropdown list.

6. Set the external device.
1) Click Set External Device to enter the Set External Device page.
2) (Optional) Select the issuing card mode again.
3) Set a card enrollment station.
4) If you select Fingerprint + Card No. as the issuing mode, set the fingerprint recorder
model.
If you select ID Card No. + Card No. as the issuing mode, set the ID card reader model.
If you select Fingerprint + ID Card No. + Card No. as the issuing mode, set the fingerprint
recorder model and the ID card reader model.
180
5) Click OK save the settings.

7. Select a card type for the smart card.
Normal Card
Card for Disabled Person: The card is for the disabled person.
Card in Blacklist: The card swiping action will be uploaded and the door cannot be opened.
Patrol Card: The card swiping action can used for checking the working status of the
inspection staff. The access permission of the inspection staff is configurable.
Duress Card: The door can open by swiping the duress card when there is duress. At the
Super Card: The card is valid for all the doors of the controller during the configured
schedule.
Visitor Card: The card is assigned for visitors. For the Visitor Card, you can set the Max.
Swipe Times.
Notes:
The Max. Swipe Times should be between 0 and 255. When setting as 0, it means the
card swiping is unlimited.
Up to 3000 visitor cards can be added.
Dismiss Card: Swipe the card to dismiss alarm.
8. Set other parameters of the card.
1) Set the card password.
2) Set the card effective date.
3) Scan your fingerprint and swipe your ID card according to the promt.
4) Swipe the smart card.
The added card information will display in the list below.
9. Click OK and the card(s) will be issued to the person.
10. (Optional) Select the added card and click Modify or Delete to edit or delete the card.
11. (Optional) Generate and save the card QR code for QR code authentication.
1) Select an added card and click QR Code to generate the card QR code.
2) In the QR code pop-up window, click Download to save the QR code to the local PC.
You can print the QR code for authentication on the specified device.
Note: The device should support the QR code authentication function. For details about
setting the QR code authentication function, see the specified device user manual.
12. (Optional) Click Link Fingerprint to link the card with the person s fingerprint, so that the person
can place the finger on the scanner instead of swiping card when passing the door.
13. (Optional) Click Link Face Picture to link the card with the face picture, so that the person can
pass the door by scanning the face via the device instead of swiping card when passing the door.
Adding Person (Face Picture)
You can collect the face picture in two ways: Local Collection and Remote Collection.
Local Collection: Collect the face picture via face picture scanner.
Remote Collection: Collect the face picture via the access control terminal.
Note: The access control terminal should support face recognition function.
Steps:
1. In the Add Person interface, click Face Picture tab
181
2. To get the face picture via face picture scanner:

1) Select Local Collection.
2) Connect the face picture scanner to the PC running the client.
3) Select the device type.
Note: Currently, the face picture scanner of DS2CS5432B-S is supported.
4) (Optional) You can click Initialize to initialize the face picture scanner.
3. To get the face picture via access control terminal:
1) Select Remote Collection.
2) Click Select Device to select the access control terminal which supports face recognition
function.
4. Click Collect to capture the face picture.
You can click Re-Collect the captured picture again.
You can click Delete to delete the captured picture.
Adding Person (Fingerprint)
Steps:
1. In the Add Person interface, click Fingerprint tab.
2. Select Local Collection as desired.

3. Before inputting the fingerprint, you should connect the fingerprint machine to the PC and set
its parameters first.
Click Set Fingerprint Machine to enter the following dialog box.
182
1) Select the device type.

Currently, the supported fingerprint machine types include DS-K1F800-F, DS-K1F810-F,
DS-K1F820-F, and DS-K1F181-F.
2) For fingerprint machine type DS-K1F800-F, you can set the serial port number, baud rate,
and overtime parameters of the fingerprint machine.
You can click Restore Default Value button to restore the default settings.
Notes:
The serial port number should correspond to the serial port number of PC.
The baud rate should be set according to the external fingerprint card reader. The default
value is 19200.
Timeout after field refers to the valid fingerprint collecting time. If the user does not input
a fingerprint or inputs a fingerprint unsuccessfully, the device will indicate that the
fingerprint collecting is over.
4. Click Start button and select the fingerprint to start collecting.
5. Lift and rest the corresponding fingerprint on the fingerprint scanner twice to collect the
fingerprint to the client.
6. (Optional) You can also click Remote Collection to collect fingerprint from the device.
7. (Optional) You can select the registered fingerprint and click Delete to delete it.
You can click Clear to clear all fingerprints.
8. Click OK to save the fingerprints.
Adding Person (Attendance Rule)
You can set the attendance rule for the person.

Note: This tab page will display when you select Non-Residence mode in the application scene when
running the software for the first time.
Steps:
1. In the Add Person interface, click Attendance Rule tab.
183
2. If the person joins in the time and attendance, check the Time and Attendance checkbox to
enable this function for the person. Then the person s card swiping records will be recorded and
analyzed for time and attendance.
For details about Time and Attendance, click More to go to the Time and Attendance module.
Importing and Exporting Person Information
The person information can be imported and exported in batch.

Steps:
1. Exporting Person: You can export the added persons information in Excel format to the local PC.
1) After adding the person, you can click Export Person button to pop up the following dialog.
2) Click to select the path of saving the exported Excel file.
3) Check the checkboxes to select the person information to export.
4) Click OK to start exporting.

2. Importing Person: You can import the Excel file with persons information in batch from the local
184
PC
1) click Import Person button.
2) You can click Download Template for Importing Person to download the template first.
3) Input the person information in the downloaded template.
Note: If the person has multiple cards, separate the card No. with semicolon.
4) Click to select the Excel file with person information.
5) Click OK to start importing.
Getting Person Information from Access Control Device
If the added access control device has been configured with person information (including person
details, fingerprint, issued card information), you can get the person information from the device and
import to the client for further operation.
Note: This function is only supported by the device the connection mothod of which is TCP/IP when
adding the device.
Steps:
1. In the organization list on the left, click to select an organization to import the persons.
2. Click Get Person button to pop up the following dialog box.
3. The added access control device will be displayed.

4. Click to select the device and then click OK to start getting the person information from the
device.
You can also double click the device name to start getting the person information.
Notes:
The person information, including person details, person s fingerprint information (if configured),
and the linked card (if configured), will be imported to the selected organization.
185
If the person name stored in the device is empty, the person name will be filled with the issued
card No. after importing to the client.
The gender of the persons will be Male by default.
15.3.2 Managing Person
Modifying and Deleting Person
To modify the person information and attendance rule, click or in the Operation column, or
select the person and click Modify to open the editing person dialog.
You can click to view the person s card swiping records.
To delete the person, select a person and click Delete to delete it.
Note: If a card is issued to the current person, the linkage will be invalid after the person is deleted.
Changing Person to Other Organization
You can move the person to another organization if needed.

Steps:
1. Select the person in the list and click Change Organization button.
2. Select the organization to move the person to.

Searching Person
You can input the keyword of card No. or person name in the search field, and click Search to search
the person.
You can input the card No. by clicking Read to get the card No. via the connected card enrollment
station.
You can click Set Card Enrollment Station in the dropdown list to set the parameters.
15.3.3 Issuing Card in Batch
You can issue multiple cards for the person with no card issued in batch.
Steps:
1. Click Issue Card in Batch button to enter the following dialog.
186
All the added person with no card issued will display in the Person(s) with No Card Issued list.
2. Select the card type according to actual needs.

Note: For details about the card type, refer to Adding Person (Card).
3. Input the password of the card itself in the Card Password field. The card password should
contain 4 to 8 digits.
Note: The password will be required when the card holder swiping the card to get enter to
or exit from the door if you enable the card reader authentication mode as Card and Password,
Password and Fingerprint, and Card, Password, and Fingerprint. For details, refer to Chapter 0
Lane Controller Parameters
Steps:

invalid.
invalid.
187
4. Input the card quantity issued for each person.
For example, if the Card Quantity is 3, you can read or enter three card No. for each person.
5. Click to set the effective time and expiry time of the card.
6. In the Person(s) with No Card Issued list on the left, select the person to issue card.
Note: You can click on the Person Name, Gender, and Department column to sort the persons
according to actual needs.
7. Select the Card Reader Mode for reading the card No.
Access Controller Reader: Place the card on the reader of the Access Controller and click
Read to get the card No.
Card Enrollment Station: Place the card on the Card Enrollment Station and click Read to
get the card No.
Note: The Card Enrollment Station should connect with the PC running the client. You can
click Set Card Enrollment Station to enter the following dialog.
1) Select the Card Enrollment Station type.

Note: Currently, the supported card reader types include DS-K1F100-D8, DS-K1F100-M,
DS-K1F100-D8E, and DS-K1F180-D8E.
2) Set the parameters about the connected card enrollment station.
You can click Restore Default Value button to restore the defaults.
Manually Input: Input the card No. and click Enter to input the card No.
8. After issuing the card to the person, the person and card information will display in the Person(s)
with Card Issued list.
188
15.4 Schedule and Template

Purpose:
You can configure the template including week schedule and holiday schedule. After setting the
templates, you can adopt the configured templates to access control permissions when setting the
permission, so that the access control permission will take effect in the time durations of the
template.
Click to enter the schedule and template interface.
You can manage the schedule of access control permission including Week Schedule, Holiday
Schedule, and Template. For permission settings, please refer to Chapter 15.5 Permission
Configuration.
15.4.1 Week Schedule
Click Week Schedule tab to enter the Week Schedule Management interface.
The client defines two kinds of week plan by default: Whole Week Schedule and Blank Schedule,
which cannot be deleted and edited.
Whole Week Schedule: Card swiping is valid on each day of the week.
Blank Schedule: Card swiping is invalid on each day of the week.
You can perform the following steps to define custom schedules on your demand.
Steps:
1. Click Add Week Schedule button to pop up the adding schedule interface.
189
2. Input the name of week schedule and click OK button to add the week schedule.
3. Select the added week schedule in the schedule list and you can view its property on the right.
You can edit the week schedule name and input the remark information.
4. On the week schedule, click and drag on a day to draw on the schedule, which means in that
period of time, the configured permission is activated.
Note: Up to 8 time periods can be set for each day in the schedule.
5. When the cursor turns to , you can move the selected time bar you just edited. You can also
edit the displayed time point to set the accurate time period.
and then click Delete Duration to delete the selected time bar,
or click Clear to delete all the time bars,
or click Copy to Week to copy the time bar settings to the whole week.
15.4.2 Holiday Group
Click Holiday Group tab to enter the Holiday Group Management interface.
Steps:
190
1. Click Add Holiday Group button on the left to pop up the adding holiday group interface.
2. Input the name of holiday group in the text filed and click OK button to add the holiday group.
3. Select the added holiday group and you can edit the holiday group name and input the remark
information.
4. Click Add Holiday icon on the right to add a holiday period to the holiday list and configure the
duration of the holiday.
Note: Up to 16 holidays can be added to one holiday group.
1) On the period schedule, click and drag to draw the period, which means in that period of
time, the configured permission is activated.
Note: Up to 8 time durations can be set for each period in the schedule.
2) When the cursor turns to , you can move the selected time bar you just edited. You can
3) When the cursor turns to , you can lengthen or shorten the selected time bar.
4) Optionally, you can select the schedule time bar,
and then click to delete the selected time bar,
or click to delete all the time bars of the holiday,
or click to delete the holiday directly.
Note: The holidays cannot be overlapped with each other.
15.4.3 Template
After setting the week schedule and holiday group, you can configure the template which contains
week schedule and holiday group schedule.
Note: The priority of holiday group schedule is higher than the week schedule.
191
Click Template tab to enter the Template Management interface.
There are two pre-defined templates by default: Whole Week Template and Blank Template, which
cannot be deleted and edited.
Whole Week Template: The card swiping is valid on each day of the week and it has no holiday
group schedule.
Blank Template: The card swiping is invalid on each day of the week and it has no holiday group
schedule.
You can define custom templates on your demand.
Steps:
1. Click Add Template to pop up the adding template interface.
2. Input the template name in the text filed and click OK button to add the template.
3. Select the added template and you can edit its property on the right. You can edit the template
name and input the remark information.
4. Select a week schedule to apply to the schedule.
Click Week Schedule tab and select a schedule in the dropdown list.
You can also click Add Week Schedule to add a new week schedule. For details, refer to Chapter
15.4.1 Week Schedule.
192
5. Select holiday groups to apply to the schedule.

Note: Up to 4 holiday groups can be added.
Click to select a holiday group in the list and click Add to add it to the template. You can also
click Add Holiday Group to add a new one. For details, refer to Chapter 15.4.2 Holiday Group.
You can click to select an added holiday group in the right-side list and click Delete to delete it.
You can click Clear to delete all the added holiday groups.
6. Click Save button to save the settings.
15.5 Permission Configuration

In Permission Configuration module, you can add, edit, and delete the access control permission, and
then apply the permission settings to the device to take effect.
Click icon to enter the Access Control Permission interface.
193
15.5.1 Adding Permission
Purpose:
You can assign permission for persons to enter/exist the access control points (doors) in this section.
Notes:
You can add up to 4 permissions to one access control point of one device.
You can add up to 128 permissions in total.
Steps:
1. Click Add icon to enter following interface.
2. In the Permission Name field, input the name for the permission as desired.
3. Click on the dropdown menu to select a template for the permission.
Note: You should configure the template before permission settings. You can click Add Template
button to add the template. Refer to Chapter 15.4 Schedule and Template for details.
4. In the Person list, all the added persons display.
Check the checkbox(es) to select person(s) and click > to add to the Selected Person list.
(Optional) You can select the person in Selected Person list and click < to cancel the selection.
5. In the Access Control Point/Device list, all the added access control points (doors) and door
stations will display.
Check the checkbox(es) to select door(s) or door station(s) and click > to add to the selected list.
(Optional) You can select the door or door station in the selected list and click < to cancel the
selection.
194
6. Click OK button to complete the permission adding. The selected person will have the
permission to enter/exit the selected door/door station with their linked card(s) or fingerprints.
7. (Optional) after adding the permission, you can click Details to modify it. Or you can select the
permission and click Modify to modify.
You can select the added permission in the list and click Delete to delete it.
15.5.2 Applying Permission
Purpose:
After configuring the permissions, you should apply the added permission to the access control
device to take effect.
Steps:
1. Select the permission(s) to apply to the access control device.
To select multiple permissions, you can hold the Ctrl or Shift key and select permissions.
2. Click Apply All to start applying all the selected permission(s) to the access control device or
door station.
You can also click Apply Changes to apply the changed part of the selected permission(s) to the
device(s).
3. The following window will pop up, indicating the applying permission result.
Notes:
When the permission settings are changed, the following hint box will pop up.
You can click Apply Now to apply the changed permissions to the device.
Or you can click Apply Later to apply the changes later in the Permission interface.
The permission changes include changes of schedule and template, permission settings,
person s permission settings, and related person settings (including card No., fingerprint, face
195
picture, linkage between card No. and fingerprint, linkage between card No. and fingerprint,
card password, card effective period, etc).
15.6 Advanced Functions

Purpose:
After configuring the person, template, and access control permission, you can configure the
advanced functions of access control application, such as access control parameters, authentication
password, and opening door with first card, anti-passing back, etc.
Note: The advanced functions should be supported by the device.
Click icon to enter the following interface.
15.6.1 Access Control Parameters
Purpose:
After adding the access control device, you can configure its access control point (door or floor) s
Click Access Control Parameters tab to enter the parameters settings interface.
Door (Floor) Parameters
Steps:
1. In the controller list on the left, click to expand the access control device, select the door or
196
floor (access control point) and you can edit the information of the selected door on the right.

Door Magnetic: The Door Magnetic is in the status of Remain Closed (excluding special
conditions).
Exit Button Type: The Exit Button Type is in the status of Remain Open (excluding special
conditions).
Door Locked Time: After swiping the normal card and relay action, the timer for locking
the door starts working.
Door Open Timeout Alarm: The alarm can be triggered if the door has not been close
Enable Locking Door when Door Closed: The door can be locked once it is closed even if
the Door Locked Time is not reached.
Duress Code: The door can open by inputting the duress code when there is duress. At the
Super Password: The specific person can open the door by inputting the super password.
Dismiss Code: Input the dismiss code to stop the buzzer of the card reader.
Notes:
The Duress Code, Super Code, and Dismiss Code should be different.
The duress code, super password, and the dismiss code should be different from the
authentication password.
The duress code, super password, and the dismiss code should contain 4 to 8
numerics.
Card Reader Parameters
Steps:
1. In the device list on the left, click to expand the door, select the card reader name and you
can edit the card reader parameters on the right.
197

Nickname: Edit the card reader name as desired.
Enable Card Reader: Select Yes to enable the card reader.
OK LED Polarity: Select the OK LED Polarity of the card reader mainboard.
Error LED Polarity: Select the Error LED Polarity of the card reader mainboard.
Buzzer Polarity: Select the Buzzer LED Polarity of the card reader mainboard.
Minimum Card Swiping Interval: If the interval between card swiping of the same card is
less than the set value, the card swiping is invalid. You can set it as 0 to 255.
Max. Interval When Inputting Password: When you inputting the password on the card
reader, if the interval between pressing two digits is larger than the set value, the digits you
pressed before will be cleared automatically.
Enable Failed Attempts Limit of Card Reading: Enable to report alarm when the card
reading attempts reach the set value.
Max. Times of Card Swiping Failure: Set the max. failure attempts of reading card.
Enable Tampering Detection: Enable the anti-tamper detection for the card reader.
Detect When Card Reader is Offline for: When the access control device cannot connect
with the card reader for longer than the set time, the card reader will turn offline
automatically.
Buzzing Time: Set the card reader buzzing time. The available time ranges from 0 to 5999s.
0 represents continuous buzzing.
Card Reader Type: Get the card reader s type.
Card Reader Description: Get the card reader description.
Fingerprint Recognition Level: Select the fingerprint recognition level in the dropdown list.
By default, the level is Low.
3. Click the Save button to save parameters.
198
Lane Controller Parameters
Steps:

invalid.
invalid.
15.6.2 Card Reader Authentication
Purpose:
You can set the passing rules for the card reader of the access control device.
Steps:
1. Click Card Reader Authentication tab and select a card reader on the left.
2. Click Configuration button to select the card reader authentication modes for setting the
schedule.
Notes:
The available authentication modes depend on the device type.
199
Password refers to the card password set when issuing the card to the person. Chapter
15.3 Person Management.
Authentication password refers to the password set to open the door. Refer to Chapter
15.6.8 Authentication Password
1) Select the modes and click to add to the selected modes list.
You can click or to adjust the display order.
2) Click OK to confirm the selection.

3. After selecting the modes, the selected modes will display as icons.
Click the icon to select a card reader authentication mode.
4. Click and drag your mouse on a day to draw a color bar on the schedule, which means in that
period of time, the card reader authentication is valid.
5. Repeat the above step to set other time periods.

Or you can select a configured day and click Copy to Week button to copy the same settings to
the whole week.
(Optional) You can click Delete button to delete the selected time period or click Clear button to
delete all the configured time periods.
6. (Optional) Click Copy to button to copy the settings to other card readers.
200
15.6.3 Multiple Authentication
Purpose:
You can manage the cards by group and set the authentication for multiple cards for one access
control point (door).
Note: Please set the card permission and apply the permission setting to the access control device
first. For details, refer to Chapter 15.5 Permission Configuration.
Steps:
1. Click Multiple Authentication tab to enter the following interface.
2. Select access control device from the list on the left.

3. In the Set Card Group panel, click Add button to pop up the following dialog:
201
1) In the Card Group Name field, input the name for the group as desired.
2) Click to set the effective time and expiry time of the card group.
3) Check the checkbox(es) to select the card(s) to add the card group.
4) Click OK to save the card group.
4. In the Set Authentication Group panel, select the access control point (door) of the device for
multiple authentications.
5. Input the time interval for card swiping.
6. Click Add to pop up the following dialog.
202
1) Select the template of the authentication group from the dropdown list. For details about
setting the template, refer to Chapter 15.4 Schedule and Template.
2) Select the authentication type of the authentication group from the dropdown list.
Local Authentication: Authentication by the access control device.
Local Authentication and Remotely Open Door: Authentication by the access control
device and by the client.
For Local Authentication and Remotely Open Door type, you can check the checkbox to
enable the super password authentication when the access control device is
disconnected with the client.
Local Authentication and Super Password: Authentication by the access control device
and by the super password.
3) In the list on the left, the added card group will display. You can click the card group and
click to add the group to the authentication group.
You can click the added card group and click to remove it from the authentication
group.
You can also click or to set the card swiping order.
4) Input the Card Swiping Times for the selected card group.
Notes:
The Card Swiping Times should be larger than 0 and smaller than the added card
quantity in the card group.
The upper limit of Card Swiping Times is 16.
5) Click OK to save the settings.
7. Click Save to save and take effect of the new settings.
Notes:
For each access control point (door), up to four authentication groups can be added.
For the authentication group which certificate type is Local Authentication, up to 8 card groups
can be added to the authentication group.
For the authentication group which certificate type is Local Authentication and Super Password
or Local Authentication and Remotely Open Door, up to 7 card groups can be added to the
authentication group.
15.6.4 Open Door with First Card
Purpose:
You can set multiple first cards for one access control point. After the first card swiping, it allows
multiple persons access the door or other authentication actions. The first card mode contains
Remain Open with First Card, Disable Remain Open with First Card, and First Card Authorization.
Remain Open with First Card: The door remains open for the configured time duration after the
first card swiping until the remain open duration ends.
Disable Remain Open with First Card: Disable the function.
First Card Authorization: All authentications (except for the authentications of super card,
super password, duress card, and duress code) are allowed only after the first card
authorization.
Notes:
203
The first card authorization is effective only on the current day. The authorization will be
expired after 24:00 on the current day.
You can swipe the first card again to disable the first card mode.
Steps:
1. Click Open Door with First Card tab to enter the following interface.
2. Select an access control device from the list on the left.

3. Select the first card mode in the drop-down list for the access control point.
4. (Optional) If you select Remain Open with First Card, you should set remain open duration.
Notes:
The Remain Open Duration should be between 0 and 1440 minutes. By default, it is 10
minutes.
You can swipe the first card again to disable the first card mode.
5. In the First Card list, Click Add button to pop up the following dialog box.
1) Select the cards to add as first card for the door

Note: Set the card permission and apply the permission setting to the access control
device first. For details, refer to Chapter 15.5 Permission Configuration.
2) Click OK button to save adding the card.
204
6. You can click Delete button to remove the card from the first card list.
15.6.5 Anti-Passing Back
Purpose:
You can set to only pass the access control point according to the specified path and only one person
could pass the access control point after swiping the card.
Notes:
Either the anti-passing back or multi-door interlocking function can be configured for an access
control device at the same time.
You should enable the anti-passing back function on the access control device first.
Steps:
1. Click Anti-passing Back tab to enter the following interface.
2. Select an access control device from the device list on the left.
3. In the First Card Reader field, select the card reader as the beginning of the path.
4. In the list, click the text filed of Card Reader Afterward and select the linked card readers.
Example: If you select Reader In_01 as the beginning, and select Reader In_02, Reader Out_04
as the linked card readers. Then you can only get through the access control point by swiping
the card in the order as Reader In_01, Reader In_02 and Reader Out_04.
Note: Up to four afterward card readers can be added for one card reader.
205
5. (Optional) You can enter the Select Card Reader dialog box again to edit its afterward card
readers.
15.6.6 Cross-Controller Anti-passing Back
Purpose:
You can set anti-passing back for card readers in multiple access control devices. You should swipe
the card according to the configured swiping card route. And only one person could pass the access
control point after swiping the card.
Click Cross-Controller Anti-passing Back to enter the Cross-Controller Anti-passing Back tab.
Setting Route Anti-passing Back
Purpose:
The route anti-passing back depends on the card swiping route. You should set the first card reader
and the card readers afterwards.
Steps:
1. Check the Enable Cross-Controller Anti-passing Back checkbox to enable the function.
2. Set the anti-passing back parameters.
Based on Card
Note: The system will judge the anti-passing back according to the entrance and exit
records on the card.
1) Select Based on Card as the anti-passing back mode in the drop-down list.
2) Select Route Anti-passing Back as the rule.
3) Set the sector ID.
206
4) Click Select Access Controller to select a device in the pop-up window.

5) In the Card Reader area, click the icon on the left of the card reader column to select
the first card reader. The icon will turn to .
6) Click the card reader afterward input field to select the card readers afterward in the
pop-up window.
7) Check the checkbox in the Enable Anti-passing Back column to enable the anti-passing
back function.
Notes:
The displayed card readers in the card reader afterward input field should be in
authentication order.
Up to 64 devices with anti-passing back function can be added.
Up to 16 card readers afterward can be added for each card reader.
It supports M1 card at present and the sector cannot be encrypted.
Based on Network
Note: Authenticate the anti-passing back according to the entrance and exit information on
the card reader.
1) Select Based on Network as the anti-passing back mode in the drop-down list.
2) Select Route Anti-passing Back as the rule.
3) Select a server in the drop-down list for judging the anti-passing back.
4) (Optional) You can click Delete Record and select the card in the pop-up window to
delete the card swiping information in all devices.
The user should be start swiping card again from the first card reader.
6) In the Card Reader area, click the icon on the left of the card reader column to select
the first card reader. The icon will turn to .
7) Click the card reader afterward input field to select the card readers afterward in the
pop-up window.
8) Check the checkbox in the Enable Anti-passing Back column to enable the anti-passing
back function.
Notes:
The displayed card readers in the card reader afterward input field should be in
authentication order.
Up to 16 card readers afterward can be added for each card reader.
Up to 5000 cards swiping records can be stored in the selected server.
Setting Entrance/Exit Anti-passing Back
Purpose:
You can set the entrance card reader and the exit card reader only for entering and exiting, without
setting the first card reader and the card readers afterwards.
Steps:
1. In the Cross-Controller Anti-passing Back tab, check the Enable Cross-Controller Anti-passing
Back checkbox to enable the function.
207
2. Set the anti-passing back parameters.

Based on Card
Note: The system will judge the anti-passing back according to the entrance and exit
records on the card.
1) Select Based on Card as the anti-passing back mode in the drop-down list.
2) Select Entrance/Exit Anti-passing Back as the rule.
3) Set the sector ID.
5) In the Card Reader area, check the checkboxes in the Enable Anti-passing Back column
to select the entrance card reader and the exit card reader.
6) Click Save to save the settings.
Notes:
Up to one entrance carder and one exit card reader should be checked.
It supports M1 card at present and the sector cannot be encrypted..
Based on Network
Note: Authenticate the anti-passing back according to the entrance and exit information on
the card reader.
1) Select Based on Network as the anti-passing back mode in the drop-down list.
2) Select Entrance/Exit Anti-passing Back as the rule.
3) Select the server in the dropdown list for judging the anti-passing back.
4) (Optional) You can click Delete Record and select the card in the pop-up window to
delete the card swiping information in all devices.
6) In the Card Reader area, check the checkboxes in the Enable Anti-passing Back column
to select the entrance card reader and the exit card reader.
Notes:
Up to one entrance carder and one exit card reader should be checked.
Up to 5000 cards swiping records can be stored in the selected server.
15.6.7 Multi-door Interlocking
Purpose:
You can set the multi-door interlocking between multiple doors of the same access control device. To
open one of the doors, other doors must keep closed. That means in the interlocking combined door
group, up to one door can be opened at the same time.
Notes:
The function should be supported by the device.
The Multi-door Interlocking function is only supported by the access control device which has
more than one access control points (doors).
Either the anti-passing back or multi-door interlocking function can be configured for an access
control device at the same time.
208
Steps:
1. Click Multi-door Interlocking tab to enter the multi-door interlock settings page.
2. Select an access controller from the Controller List.

3. Click Add to pop up the Add Access Control Point to Interlock interface.
4. Select the access control point (door) from the list.

Note: Up to four doors can be added in one multi-door interlocking combination.
5. Click OK to save the adding.
6. (Optional) After adding the multi-door interlocking combination, you can select it from the list
and click Delete to delete the combination.
7. Click Save button to save and take effect.
15.6.8 Authentication Password
Purpose:
You can open the door by inputting the authentication password on the card reader keypad after
finishing the operation of setting authentication password.
Notes:
This authentication password function is only valid during the schedules when the
card reader authentication mode for the access control device is set as Card or Authentication
Password. For details, please refer to Chapter 0 Lane Controller Parameters
Steps:
209

invalid.
invalid.
This function should be supported by the access control device.
Steps:
1. Click Authentication Password tab and select an access control device from the list.
All the cards and persons which have been applied to the device will be displayed.
Note: For setting and applying the permissions to the device, refer to Chapter 15.5 Permission
Configuration.
2. Click the Password field of the card and input the authentication password for the card.
Note: The authentication password should contain 4 to 8 digits.
3. After setting the authentication password, the authentication password function of the card will
be enabled by default.
210
4. (Optional) You can input the keywords of card No., person name, or authentication password to
search.
Note: Up to 500 cards with authentication password can be added to one access control device. The
password should be unique and cannot be same with each other.
15.6.9 Relay Settings
Purpose:
For elevator controller, you can manage the relationship between the floor and the relay in this
chapter.
Configuring Relay and Floor
Steps:
1. Click Relay Settings tab to enter the Relay Settings interface.
2. Select an elevator controller in the Controller List on the left of the interface.
3. Select an unconfigured relay in the Unconfigured Relay panel on the right of the interface.
There are three types of unconfigured relays: Button Relay, Call Elevator Relay and Auto Button
Relay.
Button Relay: Control the validity for buttons of each floor.
Call Elevator Relay: Control to call the elevator to go to the specified floor.
Auto Button Relay: Control to press the button when the user swipes card inside the
elevator. The button of the floor will be pressed automatically according to the user s
permission.
211
4. Click and drag the unconfigured relay from the Unconfigured Relay panel to the coressponding
floor in the Floor List panel.
Or click and drag the relay from the Floor List panel to the Unconfigured Relay panel.
Or click and drag the relay from one floor to another floor in the Floor List panel.
When clicking and dragging, if two relays are of the same relay type in the two different floors,
the relays will change the place.
5. Click Save to apply the settings to the selected device.

Notes:
An elevator controller can link to up to 24 distributed elevator controllers. A distributed
elevator controller can link up to 16 relays.
Three types of relay are available: Button Relay, Call Elevator Relay and Auto Button Relay.
represents the button relay, represents the call elevator relay, and represents
the auto button relay.
Take the fiugre as an example. In the number 1-2, 1 represents the distributed
elevator controller number, 2 represents the ralay, and the icon represents the relay
type. You can click Relay Type to configure the relay type. For details about configuring the
relay type, see Configuring Relay Type.
By default, the relay total amount is the added floor number *3 (three types of relay).
Each floor contains up to 3 types of relay. You can click and drag one relay once.
If you change the floor number in the door group management, all relays in the Relay
Settings interface will restore to the default settings.
212
Configuring Relay Type
Purpose:
You can change the relay type by following the steps in this section.
Steps:
1. In the Relay Settings interface, click Relay Type to pop up the Relay Type Settings window.
Note: All relays in the Relay Type Settings window are unconfigured relays.
2. Click and drag the relay from one relay type panel to the other one.
Note: Three types of relay are available: Button Relay, Call Elevator Relay and Auto Button Relay.
represents the button relay, represents the call elevator relay, and represents the auto
button relay.
15.6.10 Custom Wiegand
Purpose:
Based on the knowledge of uploading rule for the third party wiegand, you can set multiple
customized wiegand protocols to communicate between the device and the third party card readers.
Before you start:
Wire the third party card readers to the device.
Steps:
1. Click Custom Wiegand to enter the Custom Wiegand tab.
213
2. Select a custom wiegand on the left of the interface.

3. Check Enable checkbox to enable the custom wiegand.
4. Set the wiegand name.
5. Select device.
1) Click Select Device.
2) Select the device need to use custom wiegand.
6. Input the Total Length and select the parity mode in the drop-down list.
If you select Odd-Even Parity, you should set the odd parity start bit, the odd parity length, the
even parity start bit and the even parity length.
If you select XOR Parity, you should set the XOR parity start bit, length per group and total
length.
If you select None, you are no need to set the parity mode.
7. Set output transformation rule.
1) Click Set Rule to pop up the Set Output Transformation Rules window.
2) Select rules on the left list.

Note: Press the Shift key to select multiple rules.
3) Click to move the selected rules to the right list.
4) (Optional) Click or to change the rule order.
5) (Optional) Select the rules in the Selected Rule list and click to remove the rule from
the list on the right.
214
7) In the Custom Wiegand tab, set the rule start bit, length, and the decimal digit.
8. Click Save at the upper right corner of the interface to save the settings.
Notes:
By default, the device disables the custom wiegand function.
If the device enables the custom wiegand function, all wiegand interfaces in the device will
use the customized wiegand protocol.
Up to 5 custom wiegands can be set.
Up to 32 characters are allowed in the custom wiegand name.
Up to 80 bits are available in the total length.
The odd parity start bit, the odd parity length, the even parity start bit and the even parity
length range from 1 to 80 bit.
The start bit of the card ID, the manufacturer code, the site code, and the OEM should
range from 1 to 80 bit.
For details about the custom wiegand, see Appendix A Custom Wiegand Rule Descriptions.
15.7 Searching Access Control Event

Purpose:
You can search the access control history events including remote event and local event via the client.
Local Event: Search the access control event from the database of the control client.
Remote Event: Search the access control event from the device.
Click icon and click Access Control Event tab to enter the following interface.
15.7.1 Searching Local Access Control Event
Steps:
215
1. Select the Event Source as Local Event.

2. Input the search condition according to actual needs.
3. Click Search. The results will be listed below.
4. For the access control event which is triggered by the card holder, you can click the event to view
the card holder details, including person No., person name, organization, phone number, contact
address and photo.
5. (Optional) If the event contains linked pictures, you can click in the Capture column to view the
captured picture of the triggered camera when the alarm is trigged.
6. (Optional) If the event contains linked video, you can click in the Playback column to view the
recorded video file of the triggered camera when the alarm is trigged.
Note: For setting the triggered camera, refer to Chapter 15.8.1 Access Control Event Linkage.
7. You can click Export to export the search result to the local PC in *.csv file.
15.7.2 Searching Remote Access Control Event
Steps:
1. Select the Event Source as Remote Event.
2. Input the search condition according to actual needs.
3. (Optional) You can check With Alarm Picture checkbox to search the events with alarm pictures.
4. Click Search. The results will be listed below.
5. You can click Export to export the search result to the local PC in *.csv file.
15.8 Access Control Event Configuration

Purpose:
For the added access control device, you can configure its access control linkage including access
control event linkage, access control alarm input linkage, event card linkage, and cross-device
linkage.

or click Tool->Event Management to open the Event Management page.
15.8.1 Access Control Event Linkage
Purpose:
You can assign linkage actions to the access control event by setting up a rule. For example, when the
access control event is detected, an audible warning appears or other linkage actions happen.
Note: The linkage here refers to the linkage of the client software s own actions.
Steps:
1. Click Access Control Event tab.
2. The added access control devices will display in the Access Control Device panel on the left.
Select the access control device, or alarm input, or access control point (door), or card reader to
216
configure the event linkage.

3. Select the event type to set the linkage.
4. Select the triggered camera. The image or video from the triggered camera will pop up when the
selected event occurs.
Remote Storage.
Actions for Access Control Event.
7. You can click Copy to button to copy the access control event to other access control device,
alarm input, access control point, or card reader.
Select the parameters for copy, select the target to copy to, and click OK to confirm.

Display the alarm information on the E-map.
Alarm on E-map
Note: This linkage is only available to access control point and alarm input.
217
15.8.2 Access Control Alarm Input Linkage
Purpose:
The access control alarm inputs can be linked to some actions (e.g., alarm output, host buzzer) when
it is triggered.
Steps:
1. Click Access Control Alarm Input tab to enter the following interface.
2. In the event list on the left, select an alarm input.

3. Switch the property from to to enable this action.
Host Buzzer: The audible warning of controller will be triggered.
Card Reader Buzzer: The audible warning of card reader will be triggered.
Alarm Output: The alarm output will be triggered for notification.
Access Control Point (Open/Close): The door will be open or closed when the case is triggered.
Note: The Door cannot be configured as open or closed at the same time.
4. Click Save button to save the settings.
15.8.3 Event Card Linkage
Click Event Card Linkage tab to enter the following interface.

Note: The Event Card Linkage should be supported by the device.
218
Select the access control device from the list on the left.
Click Add button to add a new linkage. You can select the event source as Event Linkage, Card
Linkage, or MAC Linkage.
Event Linkage
For the event linkage, the alarm event can be divided into four types: device event, alarm input, door
event, and card reader event.
Steps:
1. Select a device on the left and click Add.
2. Click to select the linkage type as Event Linkage, and select the event type from the dropdown
list.
For Device Event, select the detailed event type from the dropdown list.
For Alarm Input, select the type as alarm or alarm recovery and select the alarm input
name from the panel.
For Door Event, select the detailed event type and select the source door from the panel.
For Card Reader Event, select the detailed event type and select the card reader from the
panel.
3. Click different tabs to set different parameters. Switch the property from to to
enable this function.
You can set the parameters of buzzer, recording, alarm output, zone, access control point, and
audio play.
Linkage Type Linkage Target Descriptions
Host Buzzer The audible warning of controller will be triggered.
Buzzer Card Reader
The audible warning of card reader will be triggered.
Buzzing
Recording Capture Status The real-time capture will be triggered.
Alarm Output Alarm Output The alarm output will be triggered for notification.
219
The zone will be armed or disarmed according to your

Zone Zone
settings.
The door status of open, close, remain open, and
remain closed will be triggered.
Notes:
Access Control Access Control The door status of open, close, remain open,
Point Point and remain close cannot be triggered at the
same time.
The target door and the source door cannot be
the same one.
The audio prompt will be triggered. And the select
audio index related audio content will be played
Audio Play Audio Play Status according to the configured play mode.
Note: For details about the audio index content, see
Appendix B Table of Audio Index Related Content
4. Click Save to save and take effect of the parameters.
Card Linkage
Steps:
1. Click to select the linkage type as Card Linkage.
2. Input the card No. or select the card from the dropdown list.
3. Select the card reader from the panel for triggering.
5. Click different tabs to set different parameters. Switch the property from to to
enable this function.
You can set the parameters of buzzer, recording, alarm output, zone, access control point, and
audio play.
Linkage Type Linkage Target Descriptions
Host Buzzer The audible warning of controller will be triggered.
Buzzer Card Reader
The audible warning of card reader will be triggered.
Buzzing
Recording Capture Status The real-time capture will be triggered.
Alarm Output Alarm Output The alarm output will be triggered for notification.
The zone will be armed or disarmed according to your
Zone Zone
settings.
The door status of open, close, remain open, and
remain closed will be triggered.
Notes:
Access Control Access Control The door status of open, close, remain open,
Point Point and remain close cannot be triggered at the
same time.
The target door and the source door cannot be
the same one.
220
The audio prompt will be triggered. And the select

audio index related audio content will be played
Audio Play Audio Play Status according to the configured play mode.
Note: For details about the audio index content, see
Appendix B Table of Audio Index Related Content
4. Click Save to save and take effect of the parameters.
15.8.4 Cross-Device Linkage
Purpose:
You can assign to trigger other access control device s action by setting up a rule when the access
control event is triggered.
Click Cross-Device Linkage tab to enter the following interface.
Click Add button to add a new client linkage. You can select the event source as Event Linkage or
Card Linkage.
Event Linkage
For the event linkage, the alarm event can be divided into four types: device event, alarm input, door
event, and card reader event.
Steps:
1. Click to select the linkage type as Event Linkage, select the access control device as event source,
and select the event type from the dropdown list.
For Device Event, select the detailed event type from the dropdown list.
For Alarm Input, select the type as alarm or alarm recovery and select the alarm input
name from the table.
For Door Event, select the detailed event type and select the door from the table.
221
For Card Reader Event, select the detailed event type and select the card reader from the
table.
2. Set the linkage target, select the access control device from the dropdown list as the linkage
target, and switch the property from to to enable this function.
Access Control Point: The door status of open, close, remain open, and remain close will be
triggered.
Note: The door status of open, close, remain open, and remain close cannot be triggered at
the same time.
Card Linkage
Steps:
1. Click to select the linkage type as Card Linkage.
2. Select the card from the dropdown list and select the access control device as event source.
3. Select the card reader from the table for triggering.
4. Set the linkage target, select the access control device from the dropdown list as the linkage
target, and switch the property from to to enable this function.
15.9 Door Status Management

Purpose:
The door status of the added access control device will be displayed in real time. You can check the
door status and the linked event(s) of the selected door. You can control the status of the door and
set the status duration of the doors as well.
15.9.1 Access Control Group Management
Purpose:
Before controlling the door status and setting the status duration, you are required to organize it into
group for convenient management.
Perform the following steps to create the group for the access control device:
Steps:
1. Click on the control panel to open the Device Management page.

2. Click Group tab to enter the Group Management interface.
222
3. Perform the following steps to add the group.

1) Click to open the Add Group dialog box.
2) Input a group name as you want.
3) Click OK to add the new group to the group list.
You can also check the checkbox Create Group by Device Name to create the new group by
the name of the selected device.
4. Perform the following steps to import the access control points to the group:
1) Click Import on Group Management interface, and then click the Access Control tab to
open the Import Access Control page.
Notes:
You can also select Alarm Input tab and import the alarm inputs to group.
For the Video Access Control Terminal, you can add the cameras as encoding channel
to the group.
2) Select the names of the access control points in the list.
3) Select a group from the group list.
4) Click Import to import the selected access control points to the group.
You can also click Import All to import all the access control points to a selected group.
223
5. After importing the access control points to the group, you can click , or double-click the
group/access control point name to modify it.
For other detailed operations, please refer to Chapter 3.2 Group Management.
15.9.2 Controlling Door Status
Purpose:
You can control the status for a single access control point (door), including opening door, closing
door, remaining open, and remaining closed.
Click icon on the control panel to enter the Status Monitor interface.
Steps:
224
1. Select an access control group on the left. For managing the access control group, refer to
Chapter 15.9.1 Access Control Group Management.
2. The access control points of the selected access control group will be displayed on the right.
Click icon on the Status Information panel to select a door.

3. Click the following button listed on the Status Information panel to control the door.
Open Door: Click to open the door once.
Close Door: Click to close the door once.
Remain Open: Click to keep the door open.
Remain Closed: Click to keep the door closed.
Capture: Click to capture the picture manually.
4. You can view the anti-control operation result in the Operation Record panel.
Notes:
If you select the status as Remain Open/Remain Closed, the door will keep open/closed until a
new anti-control command being made.
The Capture button is available when the device supports capture function. And it cannot be
realized until the storage server is configured. Refer to Chapter 5.1 Remote Storage.
15.9.3 Controlling Floor Status
Purpose:
You can control the status for a single floor when the device is elevator controller, including opening
door, controlled, free, calling elevator, etc.
Click icon on the control panel to enter the Status Monitor interface.
1. Select an access control group on the left. For managing the access control group, refer to
Chapter 15.9.1 Access Control Group Management.
2. The floors of the selected access control group will be displayed on the right of the interface.
3. Click on the Status Information panel to select a floor.

4. Click the following button listed on the Status Information panel to control the elevator.
Open Door: The floor button will be valid for a period of time.
Controlled: You should swipe the card to press the selected floor button. And the elevator
can go to the selected floor.
Free: The selected floor button will be valid all the time.
Disable: You cannot go to the selected floor.
Call Elevator (Visitor): The elevator will go down to the first floor. The visitor can only
press the selected floor button.
Call Elevator (Resident): Call the elevator to the selected floor.
5. You can view the anti-control operation result in the Operation Record panel.
Notes:
The elevator cannot be controlled by other client software if the elevator status changes.
Only one client software can control elevator each time.
225
The client software which has controlled the elevator can receive the alarm information and the
elevator status. Other client cannot.
15.9.4 Configuring Status Duration for Door
Purpose:
You can schedule weekly time periods for an access control point (door) to remain open or remain
closed.
In the Door Status module, click Status Duration button to enter the Status Duration interface.
Steps:
1. Click to select a door from the access control device list on the left.
2. On the Door Status Configuration panel on the right, draw a schedule for the selected door.
1) Select a door status brush as Remain Open or Remain Closed.
Remain Open: The door will keep open during the configured time period. The brush
is marked as .
Remain Closed: The door will keep closed during the configured duration. The brush is
marked as .
2) Click and drag on the timeline to draw a color bar on the schedule to set the duration.
226
3. Optionally, you can select the schedule time bar and click Copy to Whole Week to copy the time
bar settings to the other days in the week.
4. You can select the time bar and click Delete Duration to delete the time period.
Or you can click Clear to clear all configured durations on the schedule.
6. You can click Copy to button to copy the schedule to other doors.
15.9.5 Configuring Status Duration for Floor
Purpose:
You can schedule weekly time periods for an access control point (floor) to be free or disabled.
In the Door Status module, click Status Duration button to enter the Status Duration interface.
Steps:
227
1. Click to select a floor from the elevator controller list on the left.
2. On the Door Status Configuration panel on the right, draw a schedule for the selected floor.
1) Select a status brush as Free or Disabled.
Free: The floor button will be free during the configured time period. The brush is
marked as .
Disabled: You cannot press the floor button during the configured duration. The brush
is marked as .
2) Click and drag on the timeline to draw a color bar on the schedule to set the duration.
3. Optionally, you can select the schedule time bar and click Copy to Whole Week to copy the time
bar settings to the other days in the week.
4. You can select the time bar and click Delete Duration to delete the time period.
Or you can click Clear to clear all configured durations on the schedule.
6. You can click Copy to button to copy the schedule to other floors.
15.9.6 Real-time Card Swiping Record
Click Card Swiping Record tab to enter the following interface.
228
The logs of card swiping records of all access control devices will display in real time. You can view the
details of the card swiping event, including card No., person name, organization, event time, etc.
You can also click the event to view the card holder details, including person No., person name,
organization, phone, contact address, etc.
Note: Authentication result refers to the card swiping result, such as card No. not registered,
succeeded, etc.
15.9.7 Real-time Access Control Alarm
Purpose:
The logs of access control events will be displayed in real time, including device exception, door event,
card reader event, and alarm input.
Click Access Control Alarm tab to enter the following interface.
Steps:
1. All access control alarms will display in the list in real time.
229
You can view the alarm type, alarm time, location, etc.
2. Click to view the alarm on E-map. For configuring the access control point on E-map, refer to
Chapter 15.11 Displaying Access Control Point on E-map.
3. You can click or to view the live view or the captured picture of the triggered camera
when the alarm is trigged.
Note: For setting the triggered camera, refer to Chapter 15.8.1 Access Control Event Linkage.
4. Click Subscribe to select the alarm that the client can receive when the alarm is triggered.
1) Check the checkbox(es) to select the alarm(s), including device exception alarm, door
event alarm, card reader alarm, and alarm input.
15.10 Controlling Door during Live View

Purpose:
You can control the door during live view.
Steps:
1. Right click on the live view window to pop up the right-click menu.
2. Click Link to Access Control Point to pop up the Set Linked Access Control Point dialog.
3. Check the Enable checkbox to enable the linkage function.
4. Select access control point from the dropdown list.

You can also click Cancel to cancel the operation.
6. Get the stream again (double-click the camera) to make the settings effective.
Four door control buttons will appear on the toolbar during live view.
230
The following table shows the descriptions of the four buttons.

Button Description
Open the door.
Close the door.
Remain open.
Remain closed.
7. Click / to open or close the door.
Or click / to set the door status as remain open or remain closed.
Note: One camera can be linked to only one access control point; Different cameras can be linked to
the same access control point.
15.11 Displaying Access Control Point on

E-map
Purpose:
You can add the access control point on the E-map, and when the alarm of the access control point is
triggered, you can view the alarm notification on the E-map, check the alarm details, and control the
door.
Note: For detailed operations of E-map, please refer to Chapter 8 E-map Management.
Adding Access Control Point as Hot Spots

Steps:
3. Check the checkboxes to select the access control point to be added.
5. Click OK to save the settings. The door icons are added on the map as hot spots and the icons of
added access control points change from to in the group list. You can click-and-drag the
access control point icons to move the hot spots to the desired locations.
You can also click-and-drag the access control point icons from the group list to the map directly
to add the hot spots.
231
Note: For Video Access Control Terminal, you can also add its camera to the E-map to view the live
view of the camera.
Modifying Hot Spots

Purpose:
the icon, etc.
Steps:
2. Select the hot spot icon on the map and then click in the toolbar, right-click the hot spot
icon and select Modify, or double-click the hot spot icon on the map to open the Modify Hot
Spot dialog box.
3. You can edit the hot spot name in the text field and select the color, the icon and the linked
access control point.
Previewing Hot Spots

Steps:
232
2. To control the access control point, you can right click the access control point icon on the map,
and click Open Door, Close Door, Remain Open, and Remain Closed to control the door.
3. If there is any alarm triggered, an icon will appear and twinkle near the hot spot (it will
twinkle for 10s). Click the alarm icon, or you can right click the door icnon and select Display
Alarm Information, to check the alarm information, including alarm type and triggering time.
Note: To display the alarm information on the map, the Alarm on E-map functionality needs to
be set as the alarm linkage action. For details, refer to Chapter 15.8 Access Control Event
Configuration.
4. To clear the alarm information displayed on the map, click on the toobar, or right click the
access control point icnon and select Clear Alarm Information to clear the alarms of the
selected zone.
Note: To display the alarm information on the map, the Alarm on E-map functionality needs to be set
as the alarm linkage action. For details, refer to Chapter 6 Event Management.
233
Chapter 16 Time and Attendance

Purpose:
The Time and Attendance module provides multiple functionalities, including shift schedule
management, attendance handling, attendance statistics and other advanced functions.
Before you start:
You should add organization and person in Access Control module. For details, refer to Chapter 0
Viewing Zone Status
Organization Management and Chapter 15.3 Person Management.

Perform the following steps to access the Time and Attendance module.
Click to enter the Time and Attendance module as follows:
234
16.1 Shift Schedule Management

Open Time and Attendance module and click Shift Schedule Management to enter the Shift
Schedule Management interface.
16.1.1 Shift Settings
Purpose:
You can add time period and shift for the shift schedule.
Click Shift Settings to pop up Shift Settings dialog.
Adding Time Period
Steps:
3. Click Time Period tab.
235
4. Click Add.
5. Set the related parameters.

Name: Set the name for time period.
Start-Work / End-Work Time: Set the start-work time and end-work time.
Attend at Least: Set the minimum attendance time.
Check-in / Check-out Required: Check the checkboxes and set the valid period for check-in or
check-out.
Mark as Late/Mark as Early Leave: Set the time period for late or early leave.
Exclude Break Period from Work Duration: Check the checkbox and set the break period
excluded.
Note: Up to 3 break periods can be set.
Set as Pay-per-Time Period: Check the checkbox and set the pay rate and minimum time unit.
The added time period will display on the left panel of the dialog.
You can also click Delete to delete the time period.
Adding Shift
Steps:
1. Click Shift Tab.
2. Click Add.
236
3. Set the name for shift.

4. Select the shift period from the drop-down list.
5. Configure the shift period with the added time period.
1) Select the time period.
2) Click the time bar to apply the time period for the select day.
You can click the time period on the bar and click or Delete to delete the period.
You can also click Clear to delete all day
The added shift will display on the left panel of the dialog.
You can also click Delete on the left panel to delete the shift.
16.1.2 Shift Schedule Settings
Purpose:
After setting the shift, you can set department schedule, person schedule and temporary schedule.
Note: The temporary schedule has higher priority than department schedule and person schedule.
Department Schedule
You can set the shift schedule for one department, and all the persons in the department will be
assigned with the shift schedule.
Note: In Time and Attendance module, the department list is the same with the organization in
Access Control. For setting the organization in Access Control, refer to Chapter 0 Viewing Zone Status
237
Organization Management.
Steps:
1. Open the Shift Schedule Management interface and select the department on the left panel.
2. Click Department Schedule to pop up Department Schedule dialog.
3. Check Time and Attendance checkbox.

All persons in the department expect those excluded from attendance will apply the attendance
schedule.
4. Select the shift from the drop-down list.
5. Set the start date and end date.
6. (Optional) Set other parameters for the schedule.
You can select Check-in Not Required, Check-out Not Required, Effective for Holiday, Effective for
Overtime, Effective for Multiple Shift Schedules.
Notes:
238
Multiple Shift Schedules contains more than one time periods. The person can check in/out
in any of the time periods and the attendance will be effective.
Example: If the multiple shift schedules contains three time periods: 00:00 to 07:00, 08:00
to 15:00 and 16:00 to 23:00. The attendance of the person adopting this multiple shift
schedules will be effective in any of the three time periods. If the person checks in at 07:50,
it will apply the nearest time period 08:00 to 15:00 to the person s attendance.
After checking the Effective for Multiple Shift Schedules checkbox, you can select the
effective time period(s) from the added time periods for the persons in the department.
1) In the Selectable Time Period list on the left, click the added time period and click
to add it to the right.
2) (Optional) To remove the selected time period, select it and click .
7. (Optional) Check Set as Default for All Persons in Department checkbox.
All persons in the department will use this shift schedule by default.
8. (Optional) If the selected department contains sub department(s), the Set as Shift Schedule for
All Sub Departments checkbox will display. You can check it to apply the department schedule to
its sub departments.
Person Schedule
Steps:
2. Select the person(s) on the right panel.
3. Click Person Schedule to pop up Person Schedule dialog.
4. Check Time and Attendance checkbox.

The configured person will apply the attendance schedule.
5. Select the shift from the drop-down list.
239
6. Set the start date and end date.

7. (Optional) Set other parameters for the schedule.
You can select Check-in Not Required, Check-out Not Required, Effective for Holiday, Effective for
Overtime, Effective for Multiple Shift Schedules.
Temporary Schedule
Steps:
3. Click Temporary Schedule to pop up Temporary Schedule dialog.
4. Click to set the shift date.

5. Configure the shift date with the added time period.
1) Select the time period.
2) Click the time bar to apply the time period for the select date.
You can click the time period on the bar and click to delete the period.
You can also click Clear to delete all day period.
6. You can click Advanced Settings to advanced attendance rules for the temporary schedule.
7. Click Add to save the settings.
240
Checking Shift Schedule Details
Steps:
1. On the Shift Schedule Management interface, select the department on the left panel.
3. Click View to pop up Shift Schedule Details dialog.
You can check the shift schedule details.
4. Click Normal Schedule tab.

You can check and edit the normal schedule details.
1) Select the shift from the drop-down list.
2) Click Attendance Rule Settings to pop up Attendance Rule Settings dialog.
You can check the attendance rules as desired and click OK to save the settings.
3) Click to set the effective date.
5. (Optional) Click Temporary Schedule tab.
241
You can check and edit the temporary schedule details.

(Optional) Click Add to add temporary schedule for the selected person.
(Optional) Click to edit the time period.
(Optional) Click to delete the temporary schedule.
Exporting Shift Schedule Details
On the Shift Schedule Management interface, select the department on the left panel and click
Export to export all persons shift schedule details to local PC.
Note: The exported details are saved in *.csv format.
16.2 Attendance Handling

Purpose:
You can handle the attendance, including check-in correction, check-out correction, leave and
business trip, and manual calculation of attendance.
Open Time and Attendance module and click Attendance Handling to enter the Attendance Handling
interface.
242
16.2.1 Check-in/out Correction
Purpose:
You can add, edit, delete, search the check-in/out correction and generate the related report. You
can also export the check-in/out correction details to local PC.
Add Check-in/out Correction

Steps:
1. Click Check-in/out Correction tab.
2. Click Add to pop up Add Check-in/out Correction dialog.
3. Set the check-in/out correction parameters.

For Check-in Correction: Check Check-in checkbox and set the actual start-work time.
For Check-out Correction: Check Check-out checkbox and set the actual end-work time.
4. Click Employee Name field and select the person.
You can also input the keyword and click to search the person you want.
5. (Optional) Input the remark information as desired.
243
6. Click Add to add the check-in/out correction.

The added check-in/out correction will display on the Attendance Handling interface.
(Optional) Select the check-in/out correction and click Modify to edit the correction.
(Optional) Select the check-in/out correction and click Delete to delete the correction.
(Optional) Click Report to generate the check-in/out correction report.
(Optional) Click Export to export the check-in/out correction details to local PC.
Search Check-in/out Correction

Steps:
1. Click Check-in/out Correction tab.
2. Set the searching conditions.
Department: Select the department from the drop-down list.
Name: Input the person name.
Time: Click to set the specified time as time range.
3. Click Search to search the check-in/out corrections.
The check-in/out correction details will display on the list.
You can also click Reset to reset the searching conditions.
16.2.2 Leave and Business Trip
Purpose:
You can add, edit, delete, search the leave and business trip and generate the related report. You can
also export the leave and business trip details to local PC.
Add Leave and Business Trip

Steps:
1. Click Leave and Business Trip tab.
2. Click Add to pop up Add Leave and Business Trip Application dialog.
244
3. Select the leave and business trip type from the Type drop-down list.
You can configure the leave type in Advanced Settings. For details, refer to Chapter 16.3.5 Leave
Type Settings.
4. Click to set the specified time as time range.
5. Click Employee Name field and select the person for this application.
You can also input the keyword and click to search the person you want.
6. (Optional) Input the remark information as desired.
7. Click Add to add the leave and business trip.
The added leave and business trip will display on the Attendance Handling interface.
(Optional) Select the leave and business trip and click Modify to edit the leave or business trip.
(Optional) Select the leave and business trip and click Delete to delete the leave or business trip.
(Optional) Click Report to generate the leave or business trip report.
(Optional) Click Export to export the leave or business trip details to local PC.
Search Leave and Business Trip

Steps:
1. Click Leave and Business Trip tab.
2. Set the searching conditions.
Department: Select the department from the drop-down list.
Name: Input the person name.
Time: Click to set the specified time as time range.
3. Click Search to search the leave and business trips.
The leave and business trip details will display on the list.
You can also click Reset to reset the searching conditions.
245
16.2.3 Manual Calculation of Attendance
Purpose:
You can calculate the attendance result manually if needed by specifying the start time and end time.
Steps:
1. Click Manual Calculation of Attendance tab.
2. Set the start time and end time for calculation.
3. Click Calculate to start.
Note: It can only calculate the attendance data within three months.
16.3 Advanced Settings

Purpose:
You can configure the basic settings, attendance rule, attendance check point, holiday settings and
leave type for attendance.
Open Time and Attendance module and click Advanced Settings to enter the Advanced Settings
interface.
16.3.1 Basic Settings
Steps:
1. Click Basic Settings tab to enter the Basic Settings interface.
2. Set the basic settings.

Start Day of Each Week: You can select one day as the start day of each week.
246
Start Date of Each Month: You can select one day as the start date of each month.
3. Set the non-work day settings.
Set as Non-Work Day: Check the checkbox(es) to set the selected day(s) as non-work day.
Set Non-Work Day s Color in Report: Click the color filed and select the color to mark the
non-work day in report.
Set Non-Work Day s Mark in Report: Input the mark as non-work day in report.
16.3.2 Attendance Rule Settings
Steps:
1. Click Attendance Rule Settings tab to enter the Attendance Rule Settings interface.
2. Set the attendance or absence settings.

If employee does not check in when starting work, you can mark as Absent or Late and set the
late time.
If employee does not check out when ending work, you can mark as Absent or Early Leave and
set the early leave duration.
3. Set the Check-in/out Settings.
You can check the checkbox of Check-in Required or Check-out Required and set the valid
period.
You can also set the late rule or early leave rule.
Note: The parameters here will be set as default for the newly added time period. It will not
affect the existed one(s).
4. Set the overtime settings.
You can set the overtime rule and set the maximum overtime for each day.
(Optional) You can check Non-scheduled Work Day checkbox and set the overtime rule for
non-work day.
247
16.3.3 Attendance Check Point Settings
You can set the card reader(s) of the access control point as the attendance check point, so that the
card swiping on the card reader(s) will be valid for attendance.
Steps:
1. Click Attendance Check Point Settings tab to enter the Attendance Check Point Settings
interface.
2. Click to pop up Add Attendance Check Point dialog.
3. Set the related information.

Check Point Name: Input a name for check point.
Card Reader: Select the card reader from the drop-down list.
Check Point Function: Select the function for check point.
Door Location: Input the door location.
Check Point Description: Set the description information for check point.
4. Click Add to add the attendance check point.
The added attendance check point will display on the list.
5. (Optional) Check Set All Card Readers as Check Points checkbox.
You can use all the card readers as check points.
Note: If this checkbox is unchecked, only the card readers in the list will be added as attendance
check points.
You can also edit or delete the card readers.
Click to edit the card reader.
Click to delete the card reader.
16.3.4 Holiday Settings
Steps:
1. Click Holiday Settings tab to enter the Holiday Settings interface.
248
2. Click to pop up Add Holiday dialog.
3. Set the related parameters.

Holiday Name: Input the name for the holiday.
Start Date / End Date: Click to specify the holiday date.
4. Click Add to add the holiday.
The added holiday will display on the list.
You can also edit or delete the holiday.
Click to edit the holiday.
Click to delete the holiday.
16.3.5 Leave Type Settings
Purpose
Steps:
1. Click Leave Type Settings tab to enter the Leave Type Settings interface.
2. Add the major leave type.

249
1) Click on the left panel to pop up the Add Major Leave Type dialog.
2) Input the name for major leave type.

3) Click Add to add the major leave type.
You can also edit or delete the major leave type.
Click to edit the major leave type.
Click to delete the major leave type.
3. Add the minor leave type.
1) Select the major leave type.
The minor leave type belonging to this major leave type will display on the right panel.
2) Click on the right panel to pop up the Add Minor Leave Type dialog.
3) Input the name for minor leave type.

4) Click Add to add the minor leave type.
You can also edit or delete the major leave type.
Click to edit the minor leave type.
Click to delete the minor leave type.
16.4 Attendance Statistics

Purpose:
After calculating attendance data, you can check the attendance summary, attendance details,
abnormal attendance, overtime, card swiping logs and reports based on the calculated attendance
data.
Notes:
The client
day.
automatically. If not calculated automatically, you can calculate the attendance data manually.
For details, refer to Chapter 16.2.3 Manual Calculation of Attendance.
250
16.4.1 Attendance Summary
Purpose:
You can get all the attendance information statistics of the employees in the specified time period.
Steps:
1. In the Time and Attendance module, click Attendance Statistics tab to enter the Attendance
Statistics page.
2. Click Attendance Summary item on the left panel to enter the Attendance Summary interface.
3. Set the search conditions, including department, employee name and attendance date.
(Optional) You can click Reset to reset all the configured search conditions.
4. Click Search to start searching and the matched results will list on this page.
(Optional) Click Report to generate the attendance report.
(Optional) Click Export to export the results to the local PC.
16.4.2 Attendance Details
Steps:
1. In the Attendance Statistics page, click Attendance Details item on the left panel to enter the
Attendance Details interface.
251
2. Set the search conditions, including department, employee name, attendance date and status.
3. Click Search to start searching and the matched results will list on this page.
(Optional) You can select a result item in the list and click Correct Check-in/out to correct the
check-in or check-out status.
(Optional) Click Report to generate the attendance report.
(Optional) Click Export to export the results to the local PC.
16.4.3 Abnormal Attendance
You can search and get the statistics of the abnormal attendance data, including No., name and
department of the employees, abnormal type, start/end time and date of attendance. For detailed
operations, refer to Chapter 0 Purpose:
data.
Notes:
The client
day.
Attendance Summary.
252
16.4.4 Overtime Search
You can search and get the overtime status statistics of the selected employee in the specified time
period. And you can check the detailed overtime information, including No., name and department
of the employees, attendance date, overtime duration and overtime type. For detailed operations,
refer to Chapter 0 Purpose:
data.
Notes:
The client
day.
Attendance Summary.
16.4.5 Card Swiping Log
You can search the card swiping logs used for the attendance statistics. After searching the logs, you
can check the card swiping details, including name and department of the employees, card swiping
time, card reader authentication mode and card No.. For detailed operations, refer to Chapter 0
Purpose:
data.
Notes:
The client
day.
Attendance Summary.
16.4.6 Report
In the Attendance Statistics page, click Report item on the left panel to enter the Report interface.
253
It supports to generate 12 kinds of attendance report: Total Overtime Monthly Report, Overtime
Details Monthly Report, Attendance Monthly Report, Start/End-Work Time Report, Department
Attendance Report, Valid Card Swiping Record Report, Attendance Daily Report, First Check-in and
Last Check-out Report, Continuous Absence Report, Continuous Early Leave Report, and Continuous
Early late Report.
254
Chapter 17 Video Intercom

Purpose:
The Video Intercom Management module provides the function of video intercom, checking call logs
and managing notice via the iVMS-4200 client software.
Note: For the user with access control module permissions, the user can enter the Access Control
module and manage video intercom and search information. For setting the user permission of
Access Control module, refer to Chapter 19 Account Management.
Before you start:
Before you can remote control the video intercom, you should add the device to the software and
configure the person to link the device in the Access Control module.
Notes:
Up to 16 door stations can be added, and up to 512 indoor stations or master stations can be
added. For details about adding the video intercom, refer to Chapter 3.1 Adding Device.
For details about configuring person in the Access Control module, refer to Chapter 15.3 Person
Management.
Click on the Control Panel, or click View-> Access Control to open the Access Control page.
Click tab on the left icon bar to enter the Video Intercom interface.
17.1 Video Intercom

Purpose:
In this section, you can call the residents via the iVMS-4200 client software and the residents can
also call the client software via the indoor station. In addition, calling the client software via door
station is also available.
17.1.1 Calling Indoor Station via iVMS-4200
Steps:
1. Click tab on the left icon bar to enter the Video Intercom interface.
255
2. Unfold the organization list on the left panel and click to select a resident group.
The information, including resident name, linked device name and device IP address, of all the
residents in the selected group will display on the right panel.
3. Select a resident, or input the keyword in the Filter field to find the desired resident.
4. Click the icon in the Call Household column to start calling the selected resident.
After answered, you will enter the In Call window.
256
Click to adjust the volume of the loudspeaker.

Click to hang up.
Click to adjust the volume of the microphone.
Notes:
One indoor station can only connect with one client software.
You can set the maximum ring duration ranging from 15s to 60s, and the maximum speaking
duration ranging from 120s to 600s via the Remote Configuration of indoor station.
17.1.2 Calling iVMS-4200 via Indoor Station/Door Station
Steps:
1. Select the client software in the indoor station or door station interface to start calling the
iVMS-4200 and an incoming call dialog will pop up in the client software.
Here we take the indoor station as an example.
257
2. Click Answer to answer the call.

Or click Hang Up to decline the call.
3. After you answer the call, you will enter the In Call window.
Click to adjust the volume of the loudspeaker.

Click to hang up.
Click to adjust the volume of the microphone.
For door station, you can click to open the door remotely.
Notes:
One video intercom device can only connect with one client software.
The maximum ring duration can be set from 15s to 60s via the Remote Configuration of the
video intercom device.
The maximum speaking duration between indoor station and iVMS-4200 can be set from 120s
to 600s via the Remote Configuration of indoor station.
The maximum speaking duration between door station and iVMS-4200 can be set from 90s to
120s via the Remote Configuration of door station.
17.1.3 Viewing Live Video of Door Station and Outer Door

Station
Purpose:
You can get the live view of the door station and outer door station in the Main View module and
control the door station and outer door station remotely.
In the Main View module, double-click a door station or outer door station device or drag the device
to a display window to start the live view.
Note: For detailed operations of live view, refer to Chapter 4 Live View.
Right-click the live view window to open the right-click menu.
258
You can click Unlock on the menu to open the door remotely.
17.2 Real-Time Call Logs

Purpose:
You can view all the real-time call logs, including dialed call logs, received call logs and missed call
logs. You can also directly dial via the log list and clear the logs.
Steps:
1. In the Video Intercom page, click Call Log tab to enter the Call Log page.
All the call logs will display on this page and you can check the log information, e.g., call status,
start time, resident s organization and name, device name and ring or speaking duration.
259
2. (Optional) Click in the Operation column to re-dial the resident.

3. (Optional) Click in the Operation column to delete the call log.
Or you can click Clear button at the upper right corner to clear all the logs.
Note: If you delete or clear the call log in real-time call log interface, you can still find the
deleted logs in Search Call Log interface. For details, refer to Chapter 17.4.1 Searching Call
Logs.
17.3 Releasing Notice

Purpose:
You can create different types of notices and send them to the residents. Four notice types are
available, including Advertising, Property, Alarm and Notice Information.
Steps:
1. In the Video Intercom page, click Release Notice tab to enter the Release Notice page.
2. Click New Notice button on the left panel to create a new notice.
3. Edit the notice on the right panel.
Steps:
1) Click icon on the Send To field to pop up the Select Resident dialog.
260
2) Check the checkbox(es) to select the resident(s).

Or you can check the All checkbox to select all the added residents.
3) Click OK to save the selection.
4) Input the subject on the Subject field.
Note: Up to 63 characters are allowed in the Subject field.
5) Click in the Type field to unfold the drop-down list and select the notice type.
6) (Optional) Click Add Picture to add a local picture to the notice.
Note: Up to 6 pictures in the JPGE format can be added to one notice. And the maximum
size of one picture is 512KB.
7) Input the notice content in the Content field.
(Optional) You can also click Clear to clear the edited content.
Note: Up to 1023 characters are allowed in the Content field.
4. Click Send to send the edited notice to the selected resident(s).
The sent notice information will display on the left panel. You can click a notice to view the details on
the right panel.
17.4 Searching Video Intercom Information

Purpose:
You can search the call logs between the iVMS-4200 client software and video intercom devices,
device unlocking logs and the sent notice information.
In the Access Control module, click icon tab to open the Search page.
17.4.1 Searching Call Logs
Steps:
261
1. In the Information Search page, click the Call Log tab to enter the Call Log interface.
2. Set the search conditions, including call status, device type, start time and end time.
Call Status: Click to unfold the drop-down list and select the call status as Dialed,
Received or Missed. Or select All to search logs with all statuses.
Device Type: Click to unfold the drop-down list and select the device type as Indoor
Station, Door Station, Outer Door Station or Analog Indoor Station. Or select All Devices
to search logs with all device types.
Start Time/End Time: Click to specify the start time and end time of a time period to
search the logs.
3. Click Search and all the matched call logs will display on this page.
For the search results,
(Optional) Check the detailed information of searched call logs, such as call status,
ring/speaking duration, device name, resident organization, etc.
(Optional) Input keywords in the Search field to filter the desired log.
(Optional) Click Export to export the call logs to your PC.
17.4.2 Searching Unlocking Logs
Steps:
1. In the Information Search page, click Unlocking Log tab to enter the Unlocking Log interface.
262
2. Set the search conditions, including unlocking type, device type, start time and end time.
Unlocking Type: Click to unfold the drop-down list and select the unlocking type as
Unlock by Password, Unlock by Duress, Unlock by Card, Unlock by Resident or Unlock by
Center. Or select All to search logs with all unlocking types.
Device Type: Click to unfold the drop-down list and select the device type as Door
Station or Door Station (V Serie). Or select All Devices to search logs with all device types.
search the logs.
3. Click Search and all the matched unlocking logs will display on this page.
For the searching results,
(Optional) Check the detailed information of searched unlocking logs, such as unlocked
time, card No., device No., etc.
(Optional) Input keywords in the Search field to filter the searching result.
(Optional) Click in the Capture column to view the captured pictures.
Note: Viewing captured picture should be supported by device.
(Optional) Click Export to export the unlocking logs to your PC.
17.4.3 Searching Notice
Steps:
1. In the Information Search page, click the Notice tab to enter the Notice interface.
263
2. Set the search conditions, including notice type, subject, recipient, start time and end time.
Notice Type: Click to unfold the drop-down list and select the notice type as
Advertising Information, Property Information, Alarm Information or Notice Information.
Or select All to search notices with all types.
Subject: Input the keywords in the Subject field to search the matched notice.
Recipient: Input the recipient information in the Recipient field to search the specified
notice.
search the notices.
3. Click Search and all the matched notices will display on this page.
For the searching results,
(Optional) Check the detailed information of searched notices, such as sending time, sending
status, etc.
(Optional) Input keywords in the Search field to filter the searching result.
(Optional) Click in the Operation column to pop up Notice Details dialog.
264
You can view and edit the notice details, check the sending failed/sent succeeded/unread users,
and resend the notice to sending failed/unread users.
(Optional) Click Export to export the notices to your PC.
265
Chapter 18 Log Management

Purpose:
The log files of the client software are stored on the local PC and can be searched for checking. Two
types of log files are provided: client logs and remote logs. The client logs refer to the log files of the
client and are stored on the local PC; the remote logs refer to the log files of the connected devices
and are stored on the local device.
Click icon on the control panel to open the Log Search page.
Searching Log Files

Steps:
1. Open the Log Search page.
2. Select the log type. If Remote Logs is selected, then click to specify the device for search.
3. Click the icon to specify the start time and end time.
Note: You can search the logs within one month.
4. Click Search. The log files between the start time and end time will be displayed on the list.
You can check the operation time, type and other information of the logs.
Note: Please narrow the time range or filter the log type for search if there are too many log files.
266
Filtering Log Files

Purpose:
After searched out successfully, the log files can be filtered by the keyword or condition, and thus
you can find the logs as you want.
Steps:
1. Click Log Filter or the icon on the Log Search page to expand the Log Filter panel.
2. Select Filter by Keyword, and then input keyword for filtering in the text field.
Or select Filter by Condition, and then specify log type in the drop-down list.
3. Optionally, you can click More to filter the log files more accurately.
4. Click Filter to start filtering. You can click Clear Filter the cancel the filtering.
Backing up Log Files

Purpose:
The log files, including the client logs and server logs, can be exported for backup.
Steps:
1. Set the condition and search the log file.
2. Click Backup Log to open the Backup Log dialog box.
3. Click the icon , select a local saving path and set a name for the file.
4. Click Backup to export the selected log file for backup.
You can click File Open Log File to check the information of the backup log files on local PC.
267
Exporting Picture
Purpose:
The alarm pictures, which are stored in the storage server, can be exported to the local PC.
Steps:
1. Select the alarm pictures.
2. Click Export Picture to open the Export Picture dialog box.
3. Click the icon , select a local saving path and set a name for the file.
4. Click Export to export the selected pictures.
268
Chapter 19 Account Management

Purpose:
Multiple user accounts can be added to the client software, and you are allowed to assign different
permissions for different users if needed.

or click Tool->Account Management to open the Account Management page.
Note: The user account you registered to log into the software is set as the super user.
19.1 Adding User

Steps:
1. Open the Account Management page.
2. Click Add User to open the Add User dialog box.
3. Select the user type from the drop-down list. Two types of user accounts are selectable:
Administrator: The administrator account has all permissions by default, and can modify the
passwords and permissions of all operators and its own account.
Operator: The operator account has no permission by default and you can assign the
permissions manually. An operator can only modify the password of its own account.
4. Input the user name, password and confirm password as desired. The software will judge
password strength automatically, and we highly recommend you to use a strong password to
ensure your data security.
5. Check the checkboxes to assign the permissions for the created user.
6. Optionally, you can select a user in the Copy from drop-down list, to copy the permissions of the
selected user.
7. Optionally, you can click Default Permission to restore the default permissions of this user.
269
Note: Up to 50 user accounts can be added for the client software.
19.2 Managing User

Purpose:
After created successfully, the user account is added to the user list on the Account Management
page. You can edit or delete the information of the user accounts.
To edit the information of the user, select the user from the list, and click Edit User.
To delete the information of the user, select the user from the list, and click Delete User.
For super and administrator user, you can click Copy to to copy the permissions to other user(s).
Note: The super user cannot be deleted and only the password of the super user can be edited.
270
Chapter 20 System Configuration

Purpose:
The general parameters, live view and playback parameters, image parameters, file saving paths, icon
of live view and playback toolbar settings, keyboard and joystick shortcuts, alarm sounds, email
settings and video intercom parameters can be configured.

or click Tool->System Configuration to open the System Configuration page.
Note: You can click Default Value to restore the defaults of all the system configurations.
20.1 General Settings

Purpose:
The frequently-used parameters, including the log expired time, network performance, etc., can be
set.
Steps:
1. Open the System Configuration page.
2. Click General tab to enter the General Settings interface.
271
3. Configure the general parameters. For details, refer to Table 20.1 General Parameters.
Log Expiry Date The time for keeping the log files, once exceeded, the files will be deleted.
Network Performance The current network conditions. It can be set as Normal, Better or Best.
Select Maximize or Full Screen as the maximum mode. For selecting
Maximum Mode Maximize, the software will be maximized and the taskbar will display. For
selecting Full Screen, the software will be displayed in full-screen mode.
Enable Auto-login Log into the client software automatically.
Pop up Security Prompt
If the default password of the added device has not been changed, the
When Using Default
prompt will pop up for notification.
Password
Enable Alarm Triggered Enable the image pop-up when alarms occur. You can also click or
Pop-up Image to enable/disable the image pop-up in Alarm Event interface.
Pop Up Alarm Image for Enable the alarm image popping up when the client is minimized if the
Minimized Client When Alarm Triggered Pop-up Image function is enabled.
Alarm Triggered Pop-up For enabling the Alarm Triggered Pop-up Image, refer to Chapter 6 Event
Image Enabled Management.
Pop Up Error Message Set whether the client prompts the error message if the email is not
When Email Settings are configured.
Empty For setting the email, refer to Chapter 20.8 Email Settings.
Auto Time Adjustment Adjust the time automatically at a specified time point.
Set to enable the keyboard or joystick. After enabled, you can set the
Enable Keyboard and
shortcuts for the keyboard and joystick. For details, refer to Chapter 20.6
Joystick
Keyboard and Joystick Shortcuts Settings.
EHome port for registration management server.
Registration
The port No. should be between 2000 to 65535.
Management Server
The default port No. is 7660.
Port
Note: Please restart the client to take effect.
Alarm Management EHome port for alarm management server.
272
Server Port The port No. should be between 2000 to 65535.

The default port No. is 7300.
Note: Please restart the client to take effect.
20.2 Live View and Playback Settings

Purpose:
The parameters for live view and playback, including picture format, pre-play duration, etc., can be
set.
Steps:
2. Click Live View and Playback tab to enter the Live View and Playback Parameter Settings
interface.
3. Configure the live view and playback parameters. For details, refer to Table 20.2 Live View and
Playback Parameters.
Picture Format Set the file format for the captured pictures during live view or playback.
Merge Downloaded San set the maximum size of merged video file for downloading the video
Video Files file by date.
Search Video Files Set to search the video files stored in the local device, in the storage
Stored in server, or both in the storage server and local device for playback.
Pre-play for Set the pre-play time for event playback. By default, it is 30s.
Enable Screen Toolbar
Show the toolbar on each display window in live view or playback.
Display
Prioritize Playback of
Play back the video files recorded on the storage server preferentially.
Video Files on Storage
Otherwise, play back the video files recorded on the local device.
Server
Resume Latest Live View Resume the latest live view status after you log into the client again.
273
Status After Restart

Disconnect Background In multiple-window division mode, double-click a live video to display it in
Videos in Single Live 1-window division mode, and the other live videos will be stopped for
View saving the resource.
Enable to use the mouse wheel for zoom in or out of the video in PTZ
mode, or for zoom in or restoring of the video in digital zoom mode. In this
Enable Wheel for Zoom
way, you can directly zoom in or out (or restore) the live video by scrolling
the mouse.
Skip Unconcerned Video Enable to skip the unconcerned video during VCA playback and the
during VCA Playback unconcerned video won t be played during VCA playback.
20.3 Image Settings

Purpose:
The image parameters of the software can be configured, such as view scale, play performance, etc.
Steps:
2. Click Image tab to enter the Image Settings interface.
3. Configure the image parameters. For details, refer to Table 20.3 Image Parameters.
The view scale of the video in live view or playback. It can be set as Full
View Scale
Screen, 4:3, 16:9 or Original Resolution.
The play performance of the live video. It can be set as Shortest Delay,
Play Performance
Balanced, or Fluency.
Auto-change Stream Change the video stream (main stream or sub-stream) automatically in live
Type view according to the size of the display window.
Set to enable decoding by hardware for live view and playback. Hardware
Hardware Decoding
Decoding can provide better decoding performance and lower CPU usage
Preferred
when playing the HD videos during live view or playback.
Enable Highlight Mark the detected objects with green rectangles in live view and playback.
Display Transaction
Display the transaction information in the live view.
Information
274
VCA Rule Display the VCA rule in the live view.

When play back the video in high-speed (8x speed and above), you can
Enable Frame Extracting
disable this function to make the image of playback more fluent to view
for High-speed Playback
the details.
Display Temperature on For the thermal device, set to display the temperature information on the
Captured Picture captured pictures.
20.4 File Saving Path Settings

Purpose:
The video files from manual recording, the captured pictures and the system configuration files are
stored on the local PC. The saving paths of these files can be set.
Steps:
2. Click File tab to enter the File Saving Path Settings interface.
3. Click the icon and select a local path for the files.
20.5 Toolbar Settings

Purpose:
The icons and the order on the toolbar in the live view and playback window can be customized. You
can set to display what icons and set the icon order.
Steps:
2. Click Toolbar tab to enter the Toolbar Settings interface.
275
3. Click to select the icon to display on the toolbar. You can drag the icon to set the icon order
when displaying on the toolbar.
Icons on Live View Toolbar
Capture
Record Start manual recording. The video file is stored in the PC.
Start PTZ mode for speed dome. Click and drag in the view to
PTZ Control
perform the PTZ control.
Two-way Audio Start the two-way audio with the device in live view.
Digital Zoom
function.
Instant Playback Switch to the instant playback mode.
Remote Configuration Open the remote configuration page of the camera in live view.
Icons on Playback Toolbar
Capture
Record Start manual recording. The video file is stored in the PC.
Digital Zoom
function.
Download
stored in the PC. You can select to download by file or by date.
20.6 Keyboard and Joystick Shortcuts Settings

Purpose:
The keyboard can be connected to the client and be used to control the PTZ cameras. You can set the
276
shortcuts for keyboard and joystick to get quick and convenient access to the commonly used
actions.
Note: This configuration page will display after enabling keyboard and joystick in General Settings.
For details, refer to Chapter 20.1 General Settings.
Steps:
2. Click Keyboard and Joystick tab to enter the Keyboard and Joystick Shortcut Settings interface.
3. For keyboard: Select the COM port from the drop-down list if the keyboard is connected to the
PC installed with the client.
4. For keyboard and joystick:
1) Select a certain function from the list.
2) Double-click the item field under the PC Keyboard, USB Joystick or USB Keyboard column.
3) Select the compound keys operation or number from the drop-down list to set it as the
shortcuts for the function of the keyboard or USB joystick.
20.7 Alarm Sound Settings

Purpose:
When the alarm, such as motion detection alarm, video exception alarm, etc., is triggered, the client
can be set to give an audible warning and the sound of the audible warning can be configured.
Steps:
7. Click Alarm Sound tab to enter the Alarm Sound Settings interface.
277
8. There are six pre-defined alarm sound type in the list. You can click the icon and select the
audio files from the local path for different alarms.
9. You can also click Add button to add customized alarm sound.
Double click the Type field to customize the alarm sound name as desired.
Click the icon and select the audio files from the local path for different alarms.
10. Optionally, you can click the icon for a testing of the audio file.
11. You can select the added custom alarm sound and click Delete to delete it.
Note: The format of the audio file can only be *wav.
20.8 Email Settings

Purpose:
An email notification can be sent when a system alarm occurs. To send the email to some specified
receivers, the settings of the email need to be configured before proceeding.
Steps:
2. Click Email tab to enter the Email Settings interface.

Server Authentication (Optional): If your email server requires authentication, check this
278
checkbox to use authentication to log into the server and enter the login user name and
password of your email account.
SMTP Server: Input the SMTP Server address.
Encryption Type: You can check the radio to select Non-Encrypted, SSL, or STARTTLS.
Port: Input the communication port of email service. The port is 25 by default.
User Name: Input the user name of the sender email address if Server Authentication is
checked.
Password: Input the password of the sender Email address if Server Authentication is checked.
Sender Address: Input the email address of the sender.
Receiver 1 to 3: Input the email address of the receiver. Up to 3 receivers can be set.
4. Optionally, you can check the checkbox Enable SSL to increase the security of email sending.
5. Optionally, you can click Send Test Email to send an email to the receiver for test.
20.9 Video Intercom Settings

Purpose:
You can configure the video intercom parameters accordingly.
Steps:
2. Click the Video Intercom tab to enter the Video Intercom Settings interface.
Ringtone: Click the icon and select the audio file from the local path for the ringtone of
indoor station. Optionally, you can click the icon for a testing of the audio file.
Max. Ring Duration: Input the maximum duration of the ringtone.
Max. Speaking Duration with Indoor Station: Input the maximum duration of speaking with the
indoor station.
Max. Speaking Duration with Door Station: Input the maximum duration of speaking with the
door station.
20.10 Access Control Settings

Purpose:
279
You can set the time so that the system will get the access control events which are not uploaded to
the client from the access control device and save them to the client s database.
For Example: If the device is armed by another client B, the triggered events cannot be uploaded to
the current client A during the arming period. When the client A arms the device again, you can
synchronize these events from device to client A via this function.
Steps:
2. Click Access Control tab to enter the Access Control Settings interface.
3. Check the Auto-synchronize Access Control Event checkbox to enable this function and set the
time for synchronization.
280
Chapter 21 Statistics
Purpose:
In Statistics, it provides eight modules for data statistics via the software: Heat Map, People Counting,
Counting, Road Traffic, Face Retrieval, License Plate Retrieval, Behavior Analysis, and Face Capture.
The Heat Map module provides the display of the heat map statistics.
The People Counting module provides the display of the people counting statistics.
The Counting module provides the display of the counting statistics.
The Road Traffic module provides the display of the road traffic data.
Face Retrieval module provides the query of the picture of face.
License Plate Retrieval module provides the query of the license plate number.
Behavior Analysis module provides the query of behavior analysis.
Face Capture module provides the data search and statistics for captured faces pictures.
21.1 Heat Map

Purpose:
Heat map is a graphical representation of data represented by colors or the heat map data can be
displayed in line chart. The heat map function of the camera usually be used to analyze the visit
times and dwell time of customers in a configured area.
Before you start:
Please add a heat map network camera to the software and properly configure the corresponding
area. The added camera should have been configured with heat map rule.
Note: The heat map network camera should be added to the software as Encoding Device, please
refer to Chapter 3.1 Adding Device for detailed configuration. For configuring heat map rule, please
refer to the User Manual of the heat map network camera.
Click the icon on the control panel to open the Heat Map page.
281
Steps:
1. Open the Heat Map page.
2. Click to select a heat map camera in the area panel.
3. Select the report type as needed and set the start time.
4. Click Generate Heat Map and the heat map of the camera displays. You can click or to
display the statistics in line chart or picture mode.
In picture mode, the red color block (255, 0, 0) indicates the most welcome area, and blue color
block (0, 0, 255) indicates the less-popular area.
5. (Optional) Click to save the detailed data of heat map to your PC.
282
21.2 People Counting Statistics

Purpose:
You can check the people counting statistics of the added people counting device and the statistics
can be displayed in line chart or histogram. The detailed data can be exported for local storage.
Before you start:
Please add a people counting device to the software and properly configure the corresponding area.
The added device should have been configured with people counting rule.
Note: The people counting device should be added to the software as Encoding Device, please refer
to Chapter 3.1 Adding Device for detailed configuration. For configuring people counting rule, please
refer to the User Manual of the people counting device.
Click the icon on the control panel to open the People Counting page.
Steps:
1. Open the People Counting page.
2. Select the report type as needed and set the time.
1) Select daily report, weekly report, monthly report or annual report as the time type for
the report.
2) Select One Camera in Multi-period or One Camera in One Period as the statistics type.
One Camera in Multi-period: One camera can be selected for generating the
statistics for it of the two time periods.
One Camera in One Period: One camera can be selected for generating the statistics
for it of one time period.
3) Select Enter, Exit, or Enter and Exit as the data type.
Enter: The people entered will be counted.
Exit: The people exited will be counted.
283
Enter and Exit: Both people entered and exited will be counted.
4) Set the time period(s).
3. Select the camera for generating the report.
4. Click Search and the statistics displays on the right panel. The detailed data for each hour, day
or month will be also displayed.
By default, the statistics are shown in histogram form. You can switch it to line chart by clicking
the .
5. (Optional) Click to save the detailed data of people counting to your PC.
21.3 Counting Statistics

Purpose:
You can check the counting statistics of the added counting device and the statistics can be displayed
in line chart or histogram. The detailed data can be exported for local storage.
Before you start:
Please add a counting device to the software and properly configure the corresponding area. The
added device should have been configured with counting settings.
Note: The counting device should be added to the software as Encoding Device, please refer to
Chapter 3.1 Adding Device for detailed configuration. For configuring counting settings, please refer
to the User Manual of the counting device.
Click the icon on the control panel to open the Counting page.
284
Steps:
1. Open the Counting page.
1) Select daily report, weekly report, monthly report or annual report as the time type for
the report.
2) Select One Camera in Multi-period or One Camera in One Period as the statistics type.
One Camera in Multi-period: One camera can be selected for generating the
statistics for it of the two time periods.
One Camera in One Period: One camera can be selected for generating the statistics
for it of one time period.
3) Select Enter, Exit, or Enter and Exit as the data type.
Enter: The people entered will be counted.
Exit: The people exited will be counted.
Enter and Exit: Both people entered and exited will be counted.
4) Set the time period(s).
3. Select the camera for generating the report.
By default, the statistics are shown in histogram form. You can switch it to line chart by clicking
the .
5. (Optional) Click to save the detailed data of counting to your PC.
285
21.4 Road Traffic

Purpose:
If you add road traffic monitoring device, the captured pictures of the detected vehicle or license
plate can be searched and checked. Three types are available for searching the corresponding
pictures.
Vehicle Detection: The passed vehicle can be detected and the picture of its license plate can
be captured; besides, the vehicle color, vehicle logo and other information can be recognized
automatically.
Mixed-traffic Detection: The pedestrian, motor vehicle and non-motor vehicle can be detected,
and the picture of the object (for pedestrian/non-motor vehicle/motor vehicle without license
plate) or license plate (for motor vehicle with license plate) can be searched.
Traffic Violations: The captured pictures of the vehicle that violates the traffic rules (such as
illegal parking and congestion) can be checked.
Before you start:
1. Please add a road traffic monitoring device to the software and properly configure the
corresponding area. The added device should have been configured with corresponding
settings for capturing pictures.
2. For Traffic Violations, the Storage Server should be added to software and you must configure
the Storage Server for the device and check the checkbox of Picture Storage and Additional
Information Storage. For details, please refer to Chapter 5.1.2 Storing on Storage Device.
3. For Vehicle Detection and Mixed-traffic Detection, if no storage server is configured, the
software will search the related pictures from the storage device of the local device.
Note: The road traffic monitoring device should be added to the software as Encoding Device, please
refer to Chapter 3.1 Adding Device for detailed configuration. For configuring capture settings, please
286
refer to the User Manual of the device.
Click the icon on the control panel to open the Road Traffic page.
Steps:
1. Open the Road Traffic page.
2. Click to select a road traffic monitoring camera in the camera panel.
3. Set the search condition for finding the related pictures.
Type: Select the query type and the pictures triggered by the event type can be found.
Plate No.: Input the license plate number for searching the pictures.
Start Time/End Time: Click to set the start time and end time.
4. Click Search and the found picture items will list.
5. Click to view the captured pictures and the related information. You can check the
287
checkbox of Select Current Picture or Select All and click Download to save the pictures to your
PC.
6. (Optional) Check the checkbox(es) to select the picture items and click Export Picture to save
the pictures to your PC.
21.5 Face Retrieval

Purpose:
When the connected device (NVR or HDVR) supports face search, you can search the related picture
and play the picture related video file.
Before you start:
Please add the device to the software and properly configure the corresponding settings. For
detailed settings, please refer to the User Manual of the device.
Note: The device should be added to the software as Encoding Device, please refer to Chapter 3.1
Adding Device for detailed configuration.
Click the icon on the control panel to open the Face Retrieval page.
288
Steps:
1. Open the Face Retrieval page.
2. Click to select a device in the camera panel.
Note: This function should be supported by the connected device (NVR or HDVR).
3. Set the corresponding search condition.
(Optional) You can check the checkbox of By Picture, click Select Picture to upload the
pictures from your PC and click to select a detected face from uploaded picture for
matching the captured face pictures.
Set the similarity level.
Example: If you set the similarity as 40, the captured pictures have no less than 40%
similarity with the uploaded face picture will list.
Click to set the start time and end time for searching the captured face pictures or
video files.
4. Click Search to start searching. The search results of the pictures are displayed in list.
5. You can click on a picture from the list to check the detailed information.
You can click to show the large picture, and click to restore.
6. To save the pictures to your PC:
1) Click Export Picture and check the checkboxes to select the pictures to export. You can
also click Select All to choose all the searched pictures.
2) Click Export, and select a local saving path for the pictures.
3) Click Back to leave the picture export mode.
7. Click to play the picture s related video file in the view window on the bottom right.
You can click to show the large video, and click to restore.
You can click to adjust the play speed of the playback, click to play back the video files
frame by frame, click to enable the audio, double-click the playback window to maximize
the window.
289
21.6 License Plate Retrieval

Purpose:
When the connected device (NVR or HDVR) supports license plate search, you can search the related
picture and play the picture related video file.
Before you start:
Click the icon on the control panel to open the License Plate Retrieval page.
Steps:
1. Open the License Plate Retrieval page.
3. Set the corresponding search condition.
(Optional) Input the license plate number in the field for search.
Click to set the start time and end time for searching the matched license plate
pictures.
290
7. You can click to play the picture s related video file in the view window on the bottom right.
the window.
21.7 Behavior Analysis

Purpose:
When the connected device (NVR or HDVR) supports behavior search, you can search the related
picture and play the picture related video file.
Before you start:
Click the icon on the control panel to open the Behavior Analysis page.
Steps:
1. Open the Behavior Analysis page.
3. Click to set the start time and end time for searching the matched pictures.
291
7. Click to play the picture s related video file in the view window on the bottom right.
the window.
21.8 Face Capture

Purpose:
You can check the captured faces statistics of the added face capture device and the statistics can be
displayed in table, line chart, pie chart or histogram. The detailed data can be exported for local
storage.
Before you start:
Please add the face capture device to the software and properly configure the corresponding
settings. For detailed settings, please refer to the User Manual of the device.
Note: The face capture device should be added to the software as Encoding Device, please refer to
Chapter 3.1 Adding Device for detailed configuration.
Click the icon on the control panel to open the Face Capture page.
292
Steps:
1. Open the Face Capture page.
1) Select daily report, weekly report, monthly report or annual report as the time type for the
report.
2) Select Multi-camera in One Period as the statistics type.
Multi-camera in One Period: Multiple cameras can be selected for generating the statistics
for them of one time period.
3) Select Age, Gender or Number of People as the data type.
4) Set the time period.
3. Select the cameras for generating the report.
For Age and Gender statistics, the statistics are shown in pie chart.
For Number of People statistics, the statistics are shown in histogram form by default. You can
switch it to line chart by clicking the .
5. (Optional) Click to save the detailed data of captured face pictures to your PC.
293
Appendix A Custom Wiegand Rule

Descriptions
Take Wiegand 44 as an example, the setting values in the Custom Wiegand tab are as follows:
Custom Wiegand Name: Wiegand 44
Total Length 44
Transformation Rule (Decimal Digit) byFormatRule[4]=[1][4][0][0]
Parity Mode XOR Parity
Odd Parity Start Bit Length
Even Parity Start Bit Length
XOR Parity Start Bit 0 Length per Group 4 Total Length 40
Card ID Start Bit 0 Length 32 Decimal Digit 10
Site Code Start Bit Length Decimal Digit
OEM Start Bit Length Decimal Digit
Manufacturer Code Start Bit 32 Length 8 Decimal Digit 3
Wiegand Data = Valid Data + Parity Data
Total Length: Wiegand data length.
Transportation Rule: 4 bytes. Display the combination types of valid data. The example displays the
combination of Card ID and Manufacturer Code. The valid data can be single rule, or combination of
multiple rules.
Parity Mode: Valid parity for wiegand data. You can select either odd parity or even parity.
Odd Parity Start Bit, and Length: If you select Odd Parity, these items are available. If the odd parity
start bit is 1, and the length is 12, then the system will start odd parity calculation from bit 1. It will
calculate 12 bits. The result will be in bit 0. (Bit 0 is the first bit.)
Even Parity Start Bit, and Length: If you select Even Parity, these items are available. If the even
parity start bit is 12, and the length is 12, then the system will start even parity calculation from bit
12. It will calculate 12 bits. The result will be in the last bit.
XOR Parity Start Bit, Length per Group, and Total Length: If you select XOR Parity, these items are
available. Depending on the table displayed above, the start bit is 0, the length per group is 4, and
the total length is 40. It means that the system will calculate from bit 0, calculate every 4 bit, and
calculate 40 bits in total (10 groups in total). The result will be in the last 4 bits. (The result length is
the same as the length per group.)
Card ID Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are
available. Depending on the table displayed above, the card ID start bit is 0, the length is 32, and the
decimal digit is 10. It represents that from bit 0, there are 32 bits represent the card ID. (The length
here is calculated by bit.) And the decimal digit length is 10 bits.
Site Code Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are
available. For detailed information, see the explanation of the card ID.
294
OEM Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are
available. For detailed information, see the explanation of the card ID.
Manufacturer Code Start Bit, Length, and Decimal Digit: If you use the transformation rule, these
items are available. Depending on the table displayed above, the manufacturer code start bit is 32,
length is 8, and decimal digit is 3. It represents that from bit 32, there are 8 bits are manufacturer
code. (The length here is calculated by bit.) And the decimal length is 3.
295
Appendix B Table of Audio Index Related

Content
Index Content
1 Authenticated.
2 Card No. does not exist.
3 Card No. and fingerprint mismatch.
4 Climbing over the barrier.
5 Reverse passing.
6 Passing timeout.
7 Intrusion.
8 Force accessing.
9 Tailgating.
10 No permissions.
11 Authentication time out.
13 Authentication failed.
14 Expired card.
296
Troubleshooting
Live View
Problem:
Failed to get the live view of a certain device.
Possible Reasons:
Unstable network or the network performance is not good enough.
The device is offline.
Too many accesses to the remote device cause the load of the device too high.
The current user has no permission for live view.
The version of the client software is below the needed version.
Solutions:
Check network status and disable other not in use process on your PC.
Check the device network status.
Restart the device or disable other remote access to the device.
Log in with the admin user and try again.
Download the client software of the latest version.
Recording
Problem:
Local recording and remote recording are confused.
Solutions:
The local recording in this manual refers to the recording which stores the video files on the
HDDs, SD/SDHC cards of the local device.
The remote recording refers to the recording action commanded by the client on the remote
device side.
Playback
Problem:
Failed to download the video files or the downloading speed is too slow.
Possible Reasons:
Unstable network or the network performance is not good enough.
The NIC type is not compatible.
Too many accesses to the remote device
The current user has no permission for playback.
The version of the client software is below the needed version.
Solutions:
Check network status and disable other not in use process on your PC.
Directly connect the PC running the client to device to check the compatibility of the NIC card.
Restart the device or disable other remote access to the device.
Log in with the admin user and try again.
Download the client software of the latest version.
297
FAQ
Q: During live view, an error message prompts and the error code is 91.
A: For live of multiple window, the channel may not support sub stream. Please disable the function
of Auto-change Stream Type in System Configuration -> Image, and select the appropriate steam
type for live view.
Q: During live view, the image is blurred or influent.

A: Please check the driver of video card. We highly recommend you update the driver of video card
to the latest version.
Q: Memory leak and the client crashed after running for a while.
A: In the installation directory of the client software, open the Setup.xml file with Notepad and
modify the value of EnableNetandJoystickCheck to false. Restart the client, and if the problem is
still not solved, please contact our technique support.
Q: During live view, when getting stream via the Stream Media Server, an error message prompts
and the error code is 17.
A: Please check the port mapping of Stream Media Server, especially RTSP port.
298
Error Code
Code Error Name Description
iVMS-4200
It will be prompted when the user has no permission
317 No videos.
to play back.
HCNetSDK.dll
1 Invalid user name or password
2 No permission. The user in the device has no enough permission.
It will be prompted in the live view of remote screen
4 Invalid channel number.
control.
5 No more devices can be connected.
7 Failed to connect the device.
23 Do not support.
29 Operating failed.
It will be prompted when adding a device and the
43 No buffer.
device port is occupied by a web server.
55 Invalid IP address.
56 Invalid MAC address.
The channel does not support the It will be prompted when failed to get the sub
91
operation. stream.
The device is not registered on the
96
DDNS.
153 The user is locked.
250 The device is not activated.
Channel No. error or the device does It will be prompted when failed to get the sub
404
not support the sub stream. stream or the sub stream does not exist.
Failed to receive the data for RTSP It will be prompted when adding the live view for the
424
SETUP. software DVS via external network.
800 No more bandwidth can be used.
Playctrl.dll
2 The stream is not a Video & Audio stream.
The playback window turns black when adopting
6
H.265 in the 64-bit operating system.
SMS
The connection problem between the software and
3
the stream media server.
The streaming problem between the stream media
17
server and the device.
0206021071208
299
UD08293B

IVMS-4200 User Manual

Uploaded by

Copyright:

Available Formats

IVMS-4200 User Manual

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

IVMS-4200 User Manual

Uploaded by

Copyright:

Available Formats

User Manual of iVMS-4200

iVMS-4200 Client Software

ALL RIGHTS RESERVED.

guarantees or representations, express or implied, regarding to the Manual.

About this Manual

Please use this user manual under the guidance of professionals.

AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,

EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE

TECHNICAL SUPPORT IF REQUIRED.

5.2.2 Alarm Input Playback ............................................................................................ 72

11.1 Adding Stream Media Server ....................................................................................... 118

15.1.7 Remote Configuration ......................................................................................... 162

Chapter 16 Time and Attendance .................................................................................................. 234

20.8 Email Settings .............................................................................................................. 278

1.2 Running Environment

1.3 Function Modules

Time and Attendance Enter the Time and Attendance Module.

1. Click to pop up the following dialog.

1.4 Update Instructions

Chapter 2 User Registration and Login

Chapter 3 Device Management

3.1 Adding Device

1. Click the icon on the control panel,

3.1.1 Activating Device

3. Click the Activate button to pop up the Activation interface.

4. Create a password in the password field, and confirm the password.

STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of

2) Create a verification code.

3.1.2 Adding Online Devices

Add Multiple Online Devices

Add All the Online Devices

Modify Network Information

2. Send the file to our technical support.

Synchronizing the Password

3.1.3 Adding Devices by IP or Domain Name

3.1.4 Adding Devices by IP Segment

3.1.5 Adding Devices by Hik-Connect Domain

3.1.6 Adding Devices by EHome Account

3. Input the required information.

3.1.7 Adding Devices by Serial Port

3. Input the required information.

3.1.8 Adding Devices by IP Server

3. Input the required information.

3.1.9 Adding Devices by HiDDNS

2. Select HiDDNS as the adding mode.

3. Input the required information.

3.1.10 Importing Devices in Batch

pre-defined CSV file.

3.1.11 QR Code of Encoding Devices

Check the QR Code

3.1.12 Checking Device s Online Users

3.2 Group Management

Devices need to be added to the client software for group management.

Perform the following steps to enter the Group Management interface:

3.2.1 Adding Group

3.2.2 Importing Encoding Device to Group

3.2.3 Modifying Group/Camera