No.

SS2-PTG300-0100

PTG series
Smart Pressure Transmitter
Model PTG71 / PTG72
OVERVIEW
The Smart Pressure Transmitter model PTG is a
high- performance, highly reliable gauge
pressure transmitter. Based on Azbil
Corporation's proven Smart Transmitter
technologies, the model PTG offers improved
performance and reliability with size, weight and
cost advantages. An optional, built-in digital
indicator allows the pressure transmitter to be
used in a wide variety of applications.
The model PTG can also enable two-way
communications between HART 375
communicator, and, via DE protocol, a
TDCS3000 or 3000X and a database, thus
CE mark
facilitating self-diagnosis, range resetting, and
automatic zero adjustment operations. Model PTG71G screw type

Type of protection
FEATURES • Water and dust proof for IEC IP67
Compact and lightweight • FM Explosionproof
• Approx. 0.9 kg (Screw connection type) • FM Dust-ignition-proof
• FM Intrinsically safe
Broad range setting • KOSHA Flameproof
• Range from -100 kPa to +50 MPa. • NEPSI Flameproof
• Span from 2.0 kPa to 50 MPa. • NEPSI Dust ignition-proof
Note) Screw connection type. Covered with five ranges. • ATEX Flameproof
Remote communication China RoHS
Any range can be set using the Smart This device is used in the Oil & Gas, Petrochem-
communicator or the HART communicator ical, Chemical, Pulp & Paper, Food & Beverage,
(available separately). Machinery, Steel/Metal & Mining, and Automo-
This further increases range flexibility and keeps bile industries and therefore does not fall under
inventory down. the China RoHS Legislation.
Built-in digital indicator
If this device is used in semiconductor manufac-
The built-in digital indicator option effectively turing equipment, labeling on the device and
checks output on site. documents for the China RoHS may be required.
If such documents are required, consult an Azbil
Corp. representative.

Specifications are subject to change without notice. -1- 18th edition

No. SS2-PTG300-0100 Azbil Corporation

External views of the PTG series

Model PTG7_G Model PTG7_B Model PTG7_F Model PTG7_S

(Screw type) (Flush diaphragm type) (Flange type) (Ferrule clamp type)

Model PTG7_S Model PTG7_K Model PTG7_K

(Ferrule cap nut type) (Ferrule clamp type (Ferrule cap nut type
with cooling tower) with cooling tower)

Model PTG7_T Model PTG7_T

(Remote seal with ferrule clamp type) (Remote seal with ferrule cap nut type)

-2-
Azbil Corporation No. SS2-PTG300-0100

COMMON SPECIFICATIONS Output / Communication

Type of protection Model PTG71
JIS C0920 watertight, NEMA 3 and 4X, IEC IP67 • Analog output (4 to 20 mA DC) with SFN communi-
cation
FM Explosionproof approval
Explosionproof for Class I, Division 1, Groups A, B, C Model PTG72
and D, T4, ambient temperature = 60°C • Analog output (4 to 20 mA DC) with HART protocol
Dust-ignition for Class II and III, Division 1, Groups E, • DE output with CommStaff communication
F and G, T6 ambient temperature = 60°C, Type 4X Response speed
FM Intrinsically safe approval Approx. 400 ms
Intrinsically safe for Class I, II, III, Division1, Group A,
Vibration Tolerance
B, C, D, E, F, G
T4 / Class I, Zone 0, AEx ia IIC T4 Less than 100 Hz : 2G
100 to 2000 Hz : 1G
KOSHA Flameproof approval
Ex d IIC T4
Zero adjustment
Internal zero adjustment function
NEPSI Flameproof approval
CE conformity
Ex d IIC T4
• EN50081-2-1993, Electromagnetic Compatibility-
Ambient temperature: -25°C to +60°C
Generic Emission Standard, Part 2: Industrial
Temperature of wetted part: -25°C to +130°C
Environment
Ex d IIC T5 • EN50082-2-1995, Electromagnetic Compatibility-
Ambient temperature: -25°C to +60°C Generic Immunity Standard, Part 2: Industrial
Temperature of wetted part: -40°C to +95°C Environment
Ex d IIC T6 • EN61010-1-1993, Safety requirements for electrical
Ambient temperature: -25°C to +40°C equipment, control and laboratory use, Part: General
Temperature of wetted part: -40°C to +80°C requirement

NEPSI Dust ignition-proof Finish

DIP DP T11 Baked acrylic paint, metallic green (Munsell 5G7/8)
ATEX Flameproof approval Electrical connection
0344 1/2 NPT internal thread

II 2 G EEx d IIC T4 MAX. AMBIENT Mounting

TEMP.: +60°C • Direct mounting on a pipe (line mount)
PTB 02 ATEX 1117 • 2-inch pipe mounting
IP67 • Wall mounting
When mounting a PTG transmitter, consider its
characteristics against vibration and overall vibration
Supply voltage and load resistance including piping.
Refer to Figure 1. Use an optional mounting bracket when mounting it onto
2-inch pipe or wall.
R
850
Optional specifications
E-11.5
Built-in indicating meter
External load resistance (W)

R= With and without

0.0218 remote communication
Without remote The digital LCD indicator (optional) displays
communication
A minimum of 250W of
engineering units and can be set freely between -19999
loop resistance is required
for communication with the
and 19999 (4.5 digits).
HART communication.
250 Corrosion-proof finish
Corrosion-proof paint (Baked epoxy paint), fungus-
0 11.5 16.9 30 E
Supply voltage (V DC) proof finish

Figure 1 Supply voltage vs. load resistance

Remote communication function
characteristics Remote configuration function by using the smart com-
municator.
Power supply and voltage effect Oil free finish
0.005% F.S./V
Oil is removed from the wetted parts before shipment.

-3-
No. SS2-PTG300-0100 Azbil Corporation

Oil and water free finish

Oil and water are removed from the wetted parts before
shipment.
Electrolytic grinding (For ferrule type only)
The surface of the wetted parts is smoothed by
electrolytic grinding.
Passive state finish (For ferrule type only)
The surface of the wetted parts is treated with a passive
state finish to form a protective film to increase resis-
tance to corrosion.
Test report
The test report indicates the results of appearance,
I/O characteristics, insulation resistance, and
breakdown voltage tests.
Material certificate
The material certificate shows the chemical composi-
tion, heat-treatment conditions, and mechanical proper-
ties of the materials used for the wetted parts. The
transmitter can be easily zeroadjusted in the field with
a flat-blade screwdriver.
Withstand pressure test
The withstand pressure test result sheet shows the
results of a pressure resistance test (under water pres-
sure for 10 minutes) performed on the wetted parts.
Strength calculation sheet
The strength calculation sheet indicates the strength of
the meter body cover, flanges, bolts, etc.
Traceability certificate
This certificate consists of three parts: the transmitter's
measurement control system configuration diagram, a
calibration certificate, and a test report.
Mounting bracket
Bracket for 2-inch pipe or wall mounting (For thread
connection type and ferrule remote sealed type)
Withstand pressure and air tight test (for
general purposes)
The withstand pressure and air tight test result sheet
shows the results of a pressure resistance test (under
water pressure for 10 minutes) and a gas-tightness test
(using N2 gas for 10 minutes) performed on the wetted
parts.

-4-
Azbil Corporation No. SS2-PTG300-0100

Working range of negative pressure

1000
Unusable range
(T: 110 C to 120 C)

Process pressure (kPa abs.)

Normal operating range
(T: - 40 C to -110 C) 1000 Unusable range

Process pressure (kPa abs.)

100 Normal operating range (T: 110 C to 125 C)
(T: - 10 C to -110 C)

100
Unusable range
(T: - 50 C to -40 C) Unusable range
(T: - 20 C to -10 C)
10
10

1 1
-60 -10 40 90 140 -50 0 50 100 150
Temperature at wetted parts: T ( C) Temperature at wetted parts: T ( C)

Figure 2 Minimum working pressure for model Figure 3 Minimum working pressure for combination of
PTG__G. model PTG__S or model PTG__T or model PTG__B
or PTG__F and propylene glycol.

Unusable range
Unusable range (T: -20 to -10 C) (T: 150 to 155 C)
1000
1000
Unusable range
Process pressure (kPa abs.)

Normal operating range (T: 110 C to 125 C)

Process pressure (kPa abs.)

(T: - 40 C to -110 C) Normal operating range (T: -10 to 150 C)

100
100
Unusable range
(T: - 50 C to -40 C)

10
10

1
-60 -10 40 90 140
Temperature at wetted parts: T ( C) 1
-30 0 30 60 90 120 150
Temperature at wetted parts: T ( C)

Figure 4 Minimum working pressure for combination Figure 5 Minimum working pressure for model PTG_K.
of model PTG__B or model PTG__F and
silicone oil.

1000

Normal operating range(T: -20 to 75 C)

Process pressure (kPa abs.)

100
85

10
-40 -20 0 20 25 40 60 80 100
Temperature at wetted parts: T ( C)

Figure 6 Minimum working pressure for combination Note) *A minimum of 250 Ω of loop resistance is required
of model PTG__G and fluorine oil. for communication with the HART Communicator.

-5-
No. SS2-PTG300-0100 Azbil Corporation

Transmitter handling notes Handling precautions for HART-

To get the most from the performance this transmitter specification devices
can offer, please use it properly noting the points • "If you need to operate with a secondary host (HART
mentioned below. Before using it, please read the communicator, etc.), set the communication interval of
Instruction Manual. the primary host (DCS, device management system) to 8
Transmitter installation notes seconds or more, or suspend communication from the
 WARNING
primary host. If the primary host repeats HART commu-
nication within 8 seconds, the request from the second-
• When installing the transmitter, ensure that ary host may not be received (communication may not
gaskets do not protrude from connecting points be possible).
into the process (such as adapter flange
connection points and connecting pipes and • "If electrical noise in the environment prevents HART
flanges). Gasket protrusion may result in leaks communications with the host, take countermeasures
and output errors. such as separating the signal cables from the source of
• Do not use the transmitter outside its defined the noise, improving the grounding, changing to
pressure, temperature, and connection shielded signal cables, etc. Even if noise interferes with
specifications. A serious accident may otherwise HART communications, the 4-20 mA analog signal will
occur due to damage and leaks. be unaffected and can be used for control.
• When performing wiring work in explosion-proof
areas, follow the work method specified in the • "If this product is being operated in multidrop mode,
explosion-proof guidelines. there is a limit to the number of devices that can be used.
If you are using multidrop mode, please consult with us.

 CAUTION
• After installing the transmitter, do not stand on it.
Using it as a foothold could cause it to collapse
and cause physical injury.
• Be careful not to hit the glass indicator with tools
etc. This could break the glass and cause injury.
• The transmitter is heavy. Wear safety shoes and
take care when installing it.
• Impact to transmitter can damage sensor module.

Wiring notes
 WARNING
• To avoid shocks, do not perform electrical wiring
work with wet hands or with live wires.

 CAUTION
• Do wiring work properly in conformance with the
specifications. Wiring mistakes may result in
malfunction or irreparable damage to the
instrument.
• Use a power supply that conforms to the
specifications. Use of an improper power supply
may result in malfunction or irreparable damage
to the instrument.

-6-
Azbil Corporation No. SS2-PTG300-0100

Index of detailed specifications for process connection types

Process connection Process connection style Measurement span Reference page
Screw type G3/8 external thread 2.0 to 100 kPa {0.021 to 1.019 kgf/cm²} 8 to 14
PTG_G G1/2 external thread 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
Rc3/8 internal thread 0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
Rc1/2 internal thread 1 to 10 MPa {10.20 to 101.9 kgf/cm²}
1/2NPT internal thread
M20 × 1.5 external
Rc1/4 internal thread 5 to 50 Mpa {51.0 to 509 kgf/cm2}
G1/2 external thread
1/4NPT internal thread
M20 × 1.5 external thread
Flush diaphragm type G2-inch external thread 2.0 to 100 kPa {0.021 to 1.019 kgf/cm²} 15 to 17
PTG_B 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
1 to 10 MPa {10.20 to 101.9 kgf/cm²}
G1/2-inch external thread 0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
1 to 10 MPa {10.20 to 101.9 kgf/cm²}
Flange type JIS10K 50 mm 2.0 to 100 kPa {0.021 to 1.019 kgf/cm²} 18 to 22
PTG_F JIS30K 50 mm 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
JIS20K 25 mm 0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
JIS10K 15 mm 1 to 10 MPa {10.20 to 101.9 kgf/cm²}
JIS20K 15 mm
JIS30K 15 mm
Ferrule type IDF 2S clamp 2.0 to 100 kPa {0.021 to 1.019 kgf/cm²} 23 to 25
(Direct mount) IDF 1.5S clamp 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
PTG_S IDF 1S clamp 0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
IDF 2S cap nut 2.0 to 100 kPa {0.021 to 1.019 kgf/cm²} 26 to 28
IDF 1.5S cap nut 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
Ferrule type with cool- IDF 2S clamp 2.0 to 100 kPa {0.021 to 1.019 kgf/cm²} 29 to 31
ing tower IDF 1.5S clamp 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
PTG_K 0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
IDF 1S clamp 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
IDF 2S cap nut 2.0 to 100 kPa {0.021 to 1.019 kgf/cm²} 32 to34
IDF 1.5S cap nut 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
Remote seal with fer- IDF 2S clamp 2.0 to 100 kPa {0.021 to 1.019 kgf/cm²} 35 to 37
rule type 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
(Capillary 1, 3, 5 m) 0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
PTG_T IDF 1.5S clamp 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
IDF 2S cap nut 2.0 to 100 kPa {0.021 to 1.019 kgf/cm²} 38 to 40
40 to 400 kPa {0.408 to 4.07 kgf/cm²}
0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}
IDF 1.5S cap nut 40 to 400 kPa {0.408 to 4.07 kgf/cm²}
0.2 to 2 MPa {2.04 to 20.3 kgf/cm²}

-7-
No. SS2-PTG300-0100 Azbil Corporation

Screw type Ambient temperature limits

Normal operating range
FM Explosion proof
FM Intrinsically safe
Water and dust KOSHA Flameproof NEPSI Flameproof
proof NEPSI Flameproof (Ex d IICT6)
(Ex d II CT4, 5)
ATEX Flameproof

-20 to +70°C -20 to +60°C -20 to +40°C

Transportation and storage conditions

-30 to +80°C
Temperature range of wetted parts
FM Explosion proof
FM Intrinsically safe
Measuring span / Setting range / Max. Fill fluid
Water
and dust
KOSHA Flameproof
NEPSI
Flameproof
NEPSI
Flameproof
NEPSI Flameproof
working pressure proof
(Ex d II CT4)
(Ex d II CT5) (Ex d II CT6)

Max. ATEX Flameproof

Measuring Setting
Model no. Working Process Connection
span Range -40 to
Pressure Silicone oil -20 to +110°C -20 to +95°C -20 to +80°C
+110°C
2.0 to 100 -100 to
PTG7_G - _3 200 kPa Fluorine oil -25 to +75°C
kPa +100 kPa Rc3/8 internal thread,
40 to 400 -100 to Rc1/2 internal thread,
PTG7_G - _4 800 kPa
kPa +400 kPa G3/8 external thread, Ambient humidity limits
0.2 to 2 -0.1 to +2 G1/2 external thread, 5 to 100% RH
PTG7_G - _5 4 MPa
MPa MPa 1/2NPT internal thread,

PTG7_G - _6
1 to 10 -0.1 to +10
20 MPa
M20 x 1.5 external thread Materials
MPa MPa
Rc1/4 internal thread Fill fluid
5 to 50 -0.1 to +50 75 G1/2 external thread
PTG7_G - _7
MPa MPa MPa* 1/4NPT internal thread
• Silicone oil (for general purpose models)
M20 x 1.5external thread • Fluorine oil (for oxygen and chlorine models)
Note) * 62.5 MPa for explosion-proof type
Wetted parts
Accuracy / Temperature effect Diaphragm
Model PTG7_ G- _3 SUS316L
± 0.2% F.S. (100 kPa > X > 20 kPa) Others
Accuracy *1 ± (0.2×20 / X)% F.S. (20 kPa > X > 2 kPa)
SUS316
Zero temperature
effect per 30°C *1
± (0.5×40 / X +0.35)% Case
Aluminum alloy
Model PTG7_ G- _4
± 0.2% F.S. (400 kPa > X > 80 kPa) Weight
Accuracy *1 ± (0.2×80 / X)% F.S. (80 kPa > X > 40 kPa) Approx. 0.9 kg
Zero temperature
± (0.4 × 80 / X +0.35)% Process connection
effect per 30°C *1
• G1/2 external thread
Model PTG7_ G- _5 • G3/8 external thread
± 0.2% F.S. (2.0 MPa > X > 0.4 MPa) • Rc1/4 external thread
Accuracy *1 ± (0.2 × 0.4 / X)%F.S. (0.4 MPa > X > 0.2 MPa) • Rc1/2 external thread
• Rc3/8 external thread
Zero temperature
± (0.4 × 0.4 / X +0.35)% • 1/4 NPT internal thread
effect per 30°C *1
• 1/2 NPT internal thread
Model PTG7_ G- _6 • M20 x 1.5 external thread
± 0.2% F.S. (10 MPa > X > 2.0 MPa)
Accuracy *1 ± (0.2 × 2.0/X)%F.S. (2.0 MPa > X > 5.0 MPa) For other specification, please refer to COMMON
Zero temperature
SPECIFICATIONS.
± (0.4 × 2.0 / X +0.35)%
effect per 30°C *1

Model PTG7_ G- _7
± 0.2% F.S. (50 MPa > X > 10 MPa)
Accuracy *1 ± (0.2 × 10.0 / X)% F.S. (10 MPa > X > 5.0 MPa)

Zero temperature
± (0.4 × 10.0 / X+0.35)%
effect per 30°C *1
Note) *1: Within a range of URV > 0 and LRV > 0

-8-
Azbil Corporation No. SS2-PTG300-0100

MODEL SELECTION
Smart Pressure Transmitter model PTG7XG
Process connection: Screw type
Measuring span: 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa, 1 to 10 MPa, 5 to 50 MPa
Model number structure: Basic model number - selection - Option1 - Option2
Basic model number - - -

Product description Gauge pressure transmitter: Screw connection type

PTG71G
with SFN communication
Gauge pressure transmitter: Screw connection type
PTG72G
with HART communication
-
Type of protection Water and dust proof: IEC IP67
N
Electrical connection:1/2 NPT
FM Explosionproof and dust-ignition
D
Electrical connection:1/2 NPT
FM Intrinsically safe
E
Electrical connection: 1/2 NPT
KOSHA Flameproof
K
Electrical connection: 1/2 NPT
NEPSI Flameproof and dust-ignition
L
Electrical connection:1/2 NPT
ATEX Flameproof
V
Electrical connection: M20 × 1.5 *4
Measuring span 2.0 to 100 kPa (0.021 to 1.019 kgf/cm²) 3
40 to 400 kPa (0.408 to 4.07 kgf/cm²) 4
0.2 to 2 MPa (2.04 to 20.3 kgf/cm²) 5
1 to 10 MPa (10.20 to 101.9 kgf/cm²) 6
5 to 50 MPa (51.0 to 509 kgf/cm²) *1 7
Material: SUS316L / SUS316 / Silicone oil B1
Diaphragm / wetted
parts other than dia- SUS316L / SUS316 / Fluorine oil *2 B2
phragm / fill fluid
Process connection G½ external thread G4
G3/8 external thread (Not applicable for measuring span code “7”) G3
Rc1/4 internal thread (Applicable only for measuring span code “7”) C2
Rc½ internal thread (Not applicable for measuring span code “7”) C4
Rc3/8 internal thread (Not applicable for measuring span code “7”) C3
1/2NPT external thread (Not applicable for measuring span code “7”) M4
1/4NPT internal thread (Applicable only for measuring span code “7”) N2
½NPT internal thread (Not applicable for measuring span code “7”) N4
M20 × 1.5 external thread PH
Option 1 -
No option X
Built-in digital indicator M
Corrosion-proof finish B
Wetted part finish Oil free finish G
Water and oil free finish H
Option 2 -
No option X
Test report 1
Material certificate 2
Withstand pressure test 4
Strength calculation sheet (JIS) 5
Traceability certificate 6
Non SI unit F
Mounting bracket H
Electrical connection M20 × 1.5 adapter *3 T
Note) *1 Not applicable for ATEX Flame proof “V” in the Type of protection.
*2 The oil free finish or the water and oil free finish in the Option1 must be selected.
*3 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protection.
*4 “Built-in digital indicator” in the Option 1 must be selected.
-9-
No. SS2-PTG300-0100 Azbil Corporation

DIMENSIONS
[mm]

- 10 -
Azbil Corporation No. SS2-PTG300-0100

[mm]

- 11 -
No. SS2-PTG300-0100 Azbil Corporation

[mm]

- 12 -
Azbil Corporation No. SS2-PTG300-0100

[mm]

- 13 -
No. SS2-PTG300-0100 Azbil Corporation

[mm]

- 14 -
Azbil Corporation No. SS2-PTG300-0100

Flush diaphragm type Ambient temperature limits

(G2 inch external, G1/2 inch external / flush diaphragm) Normal operating range
Water and dust proof
FM Explosion proof
FM Intrinsically safe
NEPSI Flameproof
KOSHA Flameproof
(Ex d IICT6)
NEPSI Flameproof
(Ex d II CT4,5)
ATEX Flameproof

G2 external
-10 to +60°C -10 to +40°C
thread

G1/2 external
-10 to +50°C -10 to +40°C
thread

Transportation and storage temperature

-20 to +60°C
Measuring span / Setting range / Max.
working pressure Temperature ranges of wetted parts
Max. Water and dust proof
Model Measuring Setting Process FM Explosionproof
Working FM Intrinsically safe NEPSI NEPSI
Number span Range Connection
Pressure KOSHA Flameproof Flameproof Flameproof
NEPSI Flameproof (Ex d IICT5) (Ex d IICT6)
2.0 to 100
-100 to (Ex d II CT4)
PTG7_B - _3 200 kPa
kPa+100 kPa G2 external ATEX Flameproof
40 to 400
-100 to thread
PTG7_B - _4 800 kPa G2 external
kPa+400 kPa -10 to +110°C -10 to +95°C -10 to +80°C
0.2 to 2
-0.1 to +2 thread
G2 external
PTG7_B - _5 4 MPa
MPa MPa thread G1/2 external
-10 to +85°C -10 to +85°C -10 to +80°C
-0.1 to +10 G1/2 external thread
PTG7_B - _6 1 to 10 MPa 20 MPa
MPa thread
Ambient humidity limits
Accuracy / Temperature effect
5 to 100% RH
Model PTG7_ B- _3
Materials
± 0.5%F.S. (100 kPa > X > 20 kPa)
Accuracy *1 ± (0.5 × 20 / X)% F.S. (20k Pa > X > 2.0 kPa) Fill fluid
Zero temperature • Silicone oil
G2 external thread ± (4.7×40 / X +0.35)%
effect per 30°C *1 • Propylene glycol

Model PTG7_ B- _4 Wetted parts

Accuracy *1
± 0.5% F.S. (400 kPa > X > 80 kPa) Diaphragm
± (0.5 × 80 / X)%F.S. (80 kPa > X > 40 kPa) SUS316L
Zero temperature
G2 external thread ± (2.5 × 80 / X +0.35)%
Others
effect per 30°C *1 SUS316
Model PTG7_ B- _5 Case
*1 ± 0.5% F.S. (2 MPa > X > 0.4 MPa) Aluminum alloy
Accuracy ± (0.5 × 0.4 / X)%F.S. (0.4 MPa > X > 0.2 MPa)

Zero temperature G2 external thread ± (0.82 × 0.4 / X +0.35)%

Weight
effect per 30°C *1 G1/2 external thread ± (10.8 × 0.4 / X +0.35)% • G2 inch external thread: Approx. 2.5 kg
• G1/2 inch external thread: Approx. 1.5 kg
Model PTG7_ B- _6
± 0.5% F.S. (10.0 MPa > X > 2.0 MPa) Process connection
Accuracy *1 ± (0.5 × 2.0 / X)% F.S. (2.0 MPa > X > 1.0 MPa) • G2 inch external thread
Zero temperature G2 external thread ± (0.49 × 2.0 / X +0.35)%
• G1/2 inch external thread
effect per 30°C *1 G1/2 external thread ± (2.48 × 2.0 / X +0.35)%
For other specification, please refer to COMMON
Note) *1: Within a range of URV > 0 and LRV > 0 SPECIFICATIONS.

- 15 -
No. SS2-PTG300-0100 Azbil Corporation

MODEL SELECTION
Smart pressure transmitter model PTG7XB
Process connection: Flush diaphragm type (G2 inch external, G1/2 inch external / flush diaphragm)
Measuring span: 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa, 1 to 10 MPa
Selection Option1 Option2
Basic model number - - -

Product description Gauge pressure transmitter: Screw connection

PTG71B
type (flush) with SFN Communication
Gauge pressure transmitter: Screw connection
PTG72B
type (flush) with HART communication
-
Type of protection Water and dust proof: IEC IP67
N
Electrical connection:1/2NPT
FM Explosionproof and dust-ignition
D
Electrical connection:1/2NPT
FM Intrinsically safe
E
Electrical connection: 1/2 NPT
KOSHA Flameproof
K
Electrical connection: 1/2 NPT
NEPSI Flameproof and dust-ignition
L
Electrical connection:1/2 NPT
ATEX Flameproof
V
Electrical connection: M20 × 1.5
Measuring span 2.0 to 100 kPa (0.021 to 1.019 kgf/cm²)
3
(Not applicable for process connection G1/2)
40 to 400 kPa (0.408 to 4.07 kgf/cm²)
4
(Not applicable for process connection G1/2)
0.2 to 2MPa (2.04 to 20.3 kgf/cm²) 5
1 to 10MPa (10.20 to 101.9 kgf/cm²) 6
Material: SUS316L/SUS316L/Silicone oil C1
Diaphragm / wetted
parts other than dia- SUS316L/SUS316L/Propylene glycol CB
phragm /fill fluid
G2 external thread AGF
Process connection
G½ external thread AG4
Option 1 -
No option X
Built-in digital indicator M
Corrosion-proof finish B
Oil free finish G
Wetted part finish
Water and oil free finish H
Option2 -
No option X
Test report 1
Material certificate 2
Withstand pressure test 4
Strength calculation sheet (JIS) 5
Traceability certificate 6
Non SI unit F
Mounting bracket H
Electrical connection: M20 × 1.5 adapter *1 T

Note) *1 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protection.

- 16 -
Azbil Corporation No. SS2-PTG300-0100

DIMENSIONS
[mm]

- 17 -
No. SS2-PTG300-0100 Azbil Corporation

Flange type Ambient temperature limits

(1/2 inch, 1 inch, 2 inches) Normal operating range
FM Explosion proof
FM Intrinsically safe
NEPSI
Water and KOSHA Flameproof
Fill fluid Flameproof
dust proof NEPSI Flameproof
(Ex d IICT6)
(Ex d II CT4,5)
ATEX Flameproof

Silicone oil -20 to +70°C -20 to +60°C -20 to +40°C

Propylene glycol -10 to +70°C -10 to +60°C -10 to +40°C

Transportation and storage temperature

-30 to +80°C
Temperature ranges of wetted parts
FM Explosion proof
FM Intrinsically safe
NEPSI NEPSI
Water and KOSHA Flameproof
Fill fluid Flameproof Flameproof
dust proof NEPSI Flameproof
(Ex d IICT5) (Ex d IICT6)
(Ex d II CT4)
ATEX Flameproof

-40 to
Silicone oil -20 to +110°C -20 to +95°C -20 to +80°C
Measuring Span / Setting Range / Max. +110°C

Working Pressure Propylene glycol

-10 to
+110°C
-10 to +110°C -10 to +95°C -10 to +80°C

Max. 150°C for 60 minutes during steam cleaning for water

Model Measuring Setting Process
Working
Number span Range Connection and dust proof model
Pressure
PTG7_F - _3 2.0 to 100 -100 to 200 kPa Ambient humidity limits
kPa +100 kPa
5 to 100% RH
PTG7_F - _4 40 to 400 -100 to 800 kPa 2 inches
kPa +400 kPa (50 mm), Materials
PTG7_F - _5 0.2 to 2 -0.1 to +2 4 MPa or 1inch
MPa MPa flange rat- (25 mm), Fill fluid
ing 1/2 inch
(15 mm)
• Silicone oil
PTG7_F - _6 1 to 10 MPa -0.1 to 20 MPa or
+10 MPa flange rat-
• Propylene glycol
ing
Wetted parts
Accuracy / Temperature effect Diaphragm
SUS316L
Model PTG7_ F- _3
± 0.5% F.S. (100 kPa > X > 20 kPa) Others
Accuracy *1 ± (0.5 × 2 0 / X)% F.S. (20 kPa > X > 2 kPa) SUS316

Zero temperature
1 inches (25mm)
± (4.5 × 40 / X +0.35)% Flange parts
*1 2 inches (50 mm) SUS304
effect per 30°C
1/2 inch (15 mm) ± (10.0 × 40 / X +0.35)%
Case
Model PTG7_ F- _4
Aluminum alloy
*1 ± 0.5% F.S. (400 kPa > X > 80 kPa)
Accuracy ± (0.5 × 80 / X)% F.S. (80 kPa > X> 40 kPa) Weight
1 inches (25mm) JIS10K 50mm type : Approx. 4.2 kg
Zero temperature ± (2.4 × 80 / X +0.35)%
*1 2 inches (50 mm) JIS10K 15mm type : Approx. 2 kg
effect per 30°C
1/2 inch (15 mm) ± (7.1 × 80 / X +0.35)%
Process connection
Model PTG7_ F- _5 • JIS10K 15 mm, 50 mm
*1 ± 0.5%F.S. (2MPa>X>0.4MPa) • JIS20K 15 mm, 25 mm
Accuracy ± (0.5×0.4 / X)%F.S. (0.4MPa >X>0.2MPa)
• JIS30K 15 mm, 50 mm
1 inches (25mm)
Zero temperature ± (0.8×0.4 / X +0.35)% For other specification, please refer to COMMON
*1 2 inches (50 mm)
effect per 30°C SPECIFICATIONS.
1/2 inch (15 mm) ± (1.4×0.4 / X +0.35)%

Model PTG7_ F- _6
*1 ± 0.5% F.S. (10.0 MPa > X > 2.0 MPa)
Accuracy ± (0.5 × 2.0 / X)% F.S. (2.0 MPa > X > 1.0 MPa)

1 inches (25mm)
Zero temperature
*1 2 inches (50 mm) ± (0.5 × 2.0 / X +0.35)%
effect per 30°C
1/2 inch (15 mm)

Note) *1: Within a range of URV > 0 and LRV > 0 - 18 -

Azbil Corporation No. SS2-PTG300-0100

MODEL SELECTION
Smart pressure transmitter model PTG7XF
Process connection: Flange type
Measuring span: 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa, 1 to 10 MPa
Model number structure: Basic model number - Selection - Option1 - Option2
Selection Option1Option2
Basic model number - - -

Product description Gauge pressure transmitter:

Flange mount type with SFN communi- PTG71F
cation
Gauge pressure transmitter:
Flange mount type with HART commu- PTG72F
nication
-
Type of protection Water and dust proof: IEC IP67
N
Electrical connection:1/2NPT
FM Explosionproof and dust-ignition
D
Electrical connection:1/2NPT
FM Intrinsically safe
E
Electrical connection: 1/2 NPT
KOSHA Flameproof
K
Electrical connection: 1/2 NPT
NEPSI Flameproof and dust-ignition
L
Electrical connection:1/2 NPT
ATEX Flameproof
V
Electrical connection: M20 × 1.5
Measuring span 2.0 to 100 kPa (0.021 to 1.019 kgf/cm²) 3
40 to 400 kPa (0.408 to 4.07 kgf/cm²) 4
0.2 to 2 MPa (2.04 to 20.3 kgf/cm²) 5
1 to 10 MPa (10.20 to 101.9 kgf/cm²) 6
Material SUS316L/SUS316L/Silicone oil C1
Diaphragm / wetted
parts other than dia- SUS316L/SUS316L/Propylene glycol CB
phragm/fill fluid
Flange JIS10K A
standard/rating JIS20K *1 C
JIS30K D
ANSI 150 G
ANSI 300 H
ANSI 600 J
Flange diameter 2 inches / 50 mm 3
1 inch / 25 mm *2 5
1/2 inch / 15 mm 7
Flange material SUS304 S
Flange extension None X
Option 1 -
No option X
Built-in digital indicator M
Corrosion-proof finish B
Wetted parts finish Oil free finish G
Water and oil free finish H
Option2 -
No option X
Test report 1
Material certificate 2
Withstand pressure test 4
Strength calculation sheet (JIS) 5
Traceability certificate 6
Non SI unit F
Electrical connection:M20 × 1.5 adapter *3 T

Note) *1 The 2 inches / 50 mm “code 3” in the Flange diameter can not be selected.
*2 Only applicable for the JIS20K “code C” in the Flange standard / rating.
*3 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protection.

- 19 -
No. SS2-PTG300-0100 Azbil Corporation

DIMENSIONS
[mm]

- 20 -
Azbil Corporation No. SS2-PTG300-0100

[mm]

- 21 -
No. SS2-PTG300-0100 Azbil Corporation

[mm]

- 22 -
Azbil Corporation No. SS2-PTG300-0100

Ferrule type Ambient temperature limits

(1S, 1.5S, 2S clamp type) Normal operating range
FM Explosion proof
FM Intrinsically safe
NEPSI
Water and dust KOSHA Flameproof
Flameproof
proof NEPSI Flameproof
(Ex d IICT6)
(Ex d II CT4,5)
ATEX Flameproof
-10 to +70°C -10 to +60°C -10 to +40°C

Transportation and storage temperature

-30 to +80°C

Temperature ranges of wetted parts

FM Explosion proof
FM Intrinsically safe
NEPSI NEPSI
Water and dust KOSHA Flameproof
Flameproof Flameproof
proof NEPSI Flameproof
(Ex d IICT5) (Ex d IICT6)
(Ex d II CT4)
ATEX Flameproof
Measuring span / Setting range / Max. -10 to +121°C -10 to +110°C -10 to +95°C -10 to +80°C
working pressure 150°C for 60 minutes during steam cleaning for water
Model Measuring Setting
Max.
Process and dust proof model
Working
Number span Range Connection
Pressure Ambient humidity limits
PTG7_S - _3
2.0 to 100 -100 to
200 kPa 2S, 1.5S 5 to 100% RH
kPa +100 kPa
PTG7_S - _4
40 to 400 -100 to 800 kPa or Materials
kPa +400 kPa clamp rating
2S, 1.5S, 1S Fill fluid
-0.1 to +2 4 MPa or
PTG7_S - _5 0.2 to 2 MPa
MPa clamp rating • Propylene glycol
Accuracy / Max. working pressure Wetted parts
Model PTG7_ S- _3 Diaphragm
± 0.5% F.S. (100 kPa > X > 20 kPa) SUS316L
Accuracy *1 ± (0.5 × 20 / X)% F.S. (20 kPa > X > 2 kPa) Others
2S SUS316
Zero tempera- ± (2.4 × 40 / X +0.35)%
(Clamp type)
ture effect per
1.5S Case
30°C *1 ± (11.5 × 40 / X +0.35)%
Aluminum alloy
(Clamp type)

Model PTG7_ S- _4 Weight

Accuracy *1
± 0.5% F.S. (400 kPa > X > 80 kPa) Approx 1.2 kg
± (0.5 × 80 / X)% F.S. (80 kPa > X > 40 kPa)
Process connection
2S
± (1.3 × 80 / X +0.35)% • IDF 1S ferrule clamp type
(Clamp type)
Zero tempera-
1.5S • IDF 1.5S ferrule clamp type
ture effect per ± (5.9 × 80 / X +0.35)%
(Clamp type) • IDF 2S ferrule clamp type
30°C *1
1S
± (30.4 × 80 / X +0.35)%
(Clamp type) For other specification, please refer to COMMON
Model PTG7_ S- _5 SPECIFICATIONS.
± 0.5% F.S. (2 MPa > X > 0.4 MPa)
Accuracy *1 ± (0.5 × 0.4 / X)% F.S.(0.4 MPa > X > 0.2 MPa)

2S
± (0.58 × 0.4 / X +0.35)%
(Clamp type)
Zero tempera-
ture effect per 1.5S
± (1.5 × 0.4 / X +0.35)%
(Clamp type)
30°C *1
1S
± (6.4 × 0.4 / X +0.35)%
(Clamp type)

Note) *1: Within a range of URV > 0 and LRV > 0

- 23 -
No. SS2-PTG300-0100 Azbil Corporation

MODEL SELECTION
Smart pressure transmitter model PTG7XS
Process connection: Ferrule clamp type
Measuring span: 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa
Model number structure: Basic model number - Selection - Option1 - Option2
Selection Option1 Option2
Basic model number

Product description Gauge pressure transmitter:

Ferrule type with SFN communi- PTG71S
cation
Gauge pressure transmitter:
Ferrule type with HART commu- PTG72S
nication
-
Type of protection Water and dust proof: IEC IP67
N
Electrical connection:1/2NPT
FM Explosionproof and dust-ignition
D
Electrical connection:1/2NPT
FM Intrinsically safe
E
Electrical connection: 1/2 NPT
KOSHA Flameproof
K
Electrical connection: 1/2 NPT
NEPSI Flameproof and dust-ignition
L
Electrical connection:1/2 NPT
ATEX Flameproof
V
Electrical connection: M20 × 1.5
Measuring span 2.0 to 100 kPa (0.021 to 1.1019 kgf/cm²) 3
(Not applicable for process connection 1S.)
40 to 400 kPa (0.408 to 4.07 kgf/cm²) 4
0.2 to 2 MPa (2.04 to 20.3 kgf/cm²) 5
Material:
Diaphragm / wetted
SUS316L/ SUS316L/ Propylene glycol CB
parts other than dia-
phragm/fill fluid
Process connection IDF 1S ferrule clamp type AH2X
IDF1.5S ferrule clamp type AH3X
IDF 2S ferrule clamp type AH4X
Option 1 -
No option X
Built-in digital indicator M
Corrosion-proof finish B
Wetted parts finish Oil free finish G
Water and oil free finish H
Electrolytic grinding K
Passive state finish W
Option2 -
No option X
Test report 1
Material certificate 2
Withstand pressure test 4
Strength calculation sheet (JIS) 5
Traceability certificate 6
Non SI unit F
Mounting bracket H
Electrical connection: M20 × 1.5 adapter *1 T

Note) *1 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protection.

- 24 -
Azbil Corporation No. SS2-PTG300-0100

DIMENSIONS
[mm]

- 25 -
No. SS2-PTG300-0100 Azbil Corporation

Ferrule type Ambient temperature limits

(1.5S, 2S cap nut type) Normal operating range
FM Explosion proof
FM Intrinsically safe
Water and KOSHA Flameproof NEPSI Flameproof
dust proof NEPSI Flameproof (Ex d IICT6)
(Ex d II CT4,5)
ATEX Flameproof

-10 to
-10 to +60°C -10 to +40°C
+70°C

Transportation and storage temperature

-30 to +80°C

Temperature ranges of wetted parts

FM Explosion proof
FM Intrinsically safe
NEPSI NEPSI
Water and KOSHA Flameproof
Flameproof Flameproof
dust proof NEPSI Flameproof
(Ex d IICT5) (Ex d IICT6)
Measuring Span / Setting Range / Max. (Ex d II CT4)
ATEX Flameproof
Working Pressure
-10 to
Max. -10 to +110°C -10 to +95°C -10 to +80°C
Model Measuring Setting Process +121°C
Working
Number span Range Connection
Pressure 150°C for 60 minutes during steam cleaning for water
2.0 to 100 -100 to +100 and dust proof model
PTG7_S - _3 200 kPa
kPa kPa
40 to 400 -100 to +400 800 kPa or cap Ambient humidity limits
PTG7_S - _4 2S, 1.5S
kPa kPa nut rating 5 to 100% RH
0.2 to 2 -0.1 to +2 4 MPa or cap
PTG7_S - _5
MPa MPa nut rating Materials
Accuracy / Max. working pressure Fill fluid
• Propylene glycol
Model PTG7_ S- _3
± 0.5% F.S. (100 kPa > X > 20 kPa) Wetted parts
Accuracy *1 ± (0.5 × 20 / X)% F.S. (20 kPa > X > 2 kPa)
Diaphragm
2S SUS316L
± (2.4 × 40 / X +0.35)%
Zero temperature (Cap nut type) Others
effect per 30°C *1 1.5S SUS316
± (11.5 × 40 / X +0.35)%
(Cap nut type)
Case
Model PTG7_ S- _4 Aluminum alloy
*1 ± 0.5% F.S. (400 kPa > X > 80 kPa)
Accuracy ± (0.5 × 80 / X)%F.S. (80 kPa > X > 40 kPa) Weight
• 1.5S : Approx. 1.4 kg
Zero temperature 2S (Cap nut type) ± (1.3 × 80 / X +0.35)%
*1 • 2S : Approx. 1.7 kg
effect per 30°C 1.5S (Cap nut type) ± (5.9 × 80 / X +0.35)%
Process connection
Model PTG7_ S- _5
• IDF 1.5S ferrule cap nut type
± 0.5% F.S. (2 MPa > X > 0.4 MPa)
Accuracy *1 ± (0.5 × 0.4 / X)% F.S. (0.4 MPa > X > 0.2M Pa)
• IDF 2S ferrule cap nut type

Zero temperature 2S (Cap nut type) ± (0.58 × 0.4 / X +0.35)% For other specification, please refer to COMMON
effect per 30°C *1 1.5S (Cap nut type) ± (1.5 × 0.4 / X +0.35)% SPECIFICATIONS.
Note) *1: Within a range of URV > 0 and LRV > 0

- 26 -
Azbil Corporation No. SS2-PTG300-0100

MODEL SELECTION
Smart pressure transmitter model PTG7XS
Process connection: Ferrule cap nut type
Measuring span: 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa
Model number structure: Basic model number - Selection - Option1 - Option2
Selection Option1 Option2
- - -

Product Descrip- Gauge pressure transmitter:

PTG71S
tion Ferrule type with SFN communication
Gauge pressure transmitter:
PTG72S
Ferrule type with HART communication
-
Type of protection Water and dust proof: IEC IP67
N
Electrical connection:1/2NPT
FM Explosionproof and dust-ignition
D
Electrical connection:1/2NPT
FM Intrinsically safe
E
Electrical connection: 1/2 NPT
KOSHA Flameproof
K
Electrical connection: 1/2 NPT
NEPSI Flameproof and dust-ignition
L
Electrical connection:1/2 NPT
ATEX Flameproof
V
Electrical connection: M20 × 1.5
Measuring span 2.0 to 100 kPa (0.021 to 1.1019 kgf/cm²) 3
40 to 400 kPa (0.408 to 4.07 kgf/cm²) 4
0.2 to 2 MPa (2.04 to 20.3 kgf/cm²) 5
Material:
Diaphragm / wetted
SUS316L/SUS316L/Propylene glycol CB
parts other than dia-
phragm/fill fluid
Process connection IDF1.5S ferrule cap nut type AC3X
IDF 2S ferrule cap nut type AC4X
Option 1 -
No option X
Built-in digital indicator M
Corrosion-proof finish B
Wetted part finish Oil free finish G
Water and oil free finish H
Electrolytic grinding K
Passive state finish W
Option2 -
No option X
Test report 1
Material certificate 2
Withstand pressure test 4
Strength calculation sheet (JIS) 5
Traceability certificate 6
Non SI unit F
Mounting bracket H
Electrical connection: M20 × 1.5 adapter *1 T

Note) *1 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protection.

- 27 -
No. SS2-PTG300-0100 Azbil Corporation

DIMENSIONS
[mm]

- 28 -
Azbil Corporation No. SS2-PTG300-0100

Ferrule with cooling tower Ambient temperature limits

(1S, 1.5S, 2S clamp type) Normal operating range
FM Explosion proof
FM Intrinsically safe
NEPSI
Water and KOSHA Flameproof
Flameproof
dust proof NEPSI Flameproof
(Ex d IICT6)
(Ex d II CT4,5)
ATEX Flameproof

-10 to +70°C -10 to +60°C -10 to +40°C

Transportation and storage temperature

-30 to +80°C
Temperature ranges of wetted parts
FM Explosion proof
FM Intrinsically safe
NEPSI NEPSI
Water and KOSHA Flameproof
Flameproof Flameproof
dust proof NEPSI Flameproof
(Ex d IICT5) (Ex d IICT6)
(Ex d II CT4)
ATEX Flameproof

-10 to +150°C -10 to +110°C -10 to +95°C -10 to +80°C

Measuring span / Setting range / Max. Ambient humidity limit

working pressure 5 to 100% RH
Max.
Model Number
Measuring Setting
Working
Process Materials
span Range Connection
Pressure
Fill fluid
2.0 to 100 -100 to
PTG7_K - _3
kPa +100 kPa
200 kPa 2, 1.5S • Propylene glycol
-100 to 800 kPa or Wetted parts
PTG7_K - _4 40 to 400 kPa
+400 kPa clamp rating
2S, 1.5S, 1S Diaphragm
-0.1 to +2 4 MPa or
PTG7_K - _5 0.2 to 2 MPa
MPa clamp rating SUS316L
Accuracy / Temperature effect Others
SUS316
Model PTG7_ K- _3
± 0.5% F.S. (100 kPa > X > 20 kPa) Case
Accuracy *1 ± (0.5 × 20 / X)% F.S. (20 kPa > X > 2 kPa) Aluminum alloy
Zero tempera- 2S (Clamp type) ± (2.5 × 40 / X +0.35)% Weight
ture effect per
1.5S (Clamp type) ± (15.5 × 40 / X +0.35)% Approx. 1.4 kg
30°C *1
Process connection
Model PTG7_ K- _4
± 0.5% F.S. (400 kPa > X > 80 kPa)
• IDF 1S ferrule clamp
Accuracy *1 ± (0.5 × 80 / X)% F.S. (80 kPa >X > 40 kPa) • IDF 1.5S ferrule clamp
• IDF 2S ferrule clamp
Zero tempera- 2S (Clamp type) ± (1.4 × 80 / X +0.35)%
ture effect per 1.5S (Clamp type) ± (7.9 × 80 / X +0.35)%
For other specification, please refer to COMMON
30°C *1 1S (Clamp type) ± (38.4 × 80 / X +0.35)%
SPECIFICATIONS.
Model PTG7_ K- _5
± 0.5% F.S. (2 MPa > X > 0.4 MPa)
Accuracy *1 ± (0.5 × 0.4 / X)% F.S. (0.4 MPa > X > 0.2 MPa)

Zero tempera- 2S (Clamp type) ± (0.6 × 0.4 / X +0.35)%

ture effect per 1.5S (Clamp type) ± (1.9 × 0.4 / X +0.35)%
30°C *1 1S (Clamp type) ± (8.0 × 0.4 / X +0.35)%

Note) *1: Within a range of URV > 0 and LRV > 0

- 29 -
No. SS2-PTG300-0100 Azbil Corporation

MODEL SELECTION
Smart pressure transmitter model PTG7XK
Process connection: Ferrule clamp type with cooling tower
Measuring span: 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa
Model number structure: Basic model number - Selection - Option1 - Option2
Selection Option1 Option2
Basic model number - - -

Product description Gauge pressure transmitter:

Ferrule type with cooling tower with SFN com- PTG71K
munication
Gauge pressure transmitter:
Ferrule type with cooling tower with HART PTG72K
communication
-
Type of protection Water and dust proof: IEC IP67
N
Electrical connection:1/2NPT
FM Explosionproof and dust-ignition
D
Electrical connection:1/2NPT
FM Intrinsically safe
E
Electrical connection: 1/2 NPT
KOSHA Flameproof
K
Electrical connection: 1/2 NPT
NEPSI Flameproof and dust-ignition
L
Electrical connection:1/2 NPT
ATEX Flameproof
V
Electrical connection: M20 × 1.5
Measuring span 2.0 to 100 kPa (0.021 to 1.019 kgf/cm²) 3
(Not applicable for process connection 1S.)
40 to 400 kPa (0.408 to 4.07 kgf/cm²) 4
0.2 to 2 MPa (2.04 to 20.3 kgf/cm²) 5
Material:
Diaphragm / wetted
SUS316L/ SUS316L/ Propylene glycol CB
parts other than dia-
phragm/fill fluid
Process connection IDF 1S ferrule clamp type AH2X
IDF 1.5S ferrule clamp type AH3X
IDF 2S ferrule clamp type AH4X
Option 1 -
No option X
Built-in digital indicator M
Corrosion-proof finish B
Wetted part finish Oil free finish G
Water and oil free finish H
Electrolytic grinding K
Passive state finish W
Option2 -
No option X
Test report 1
Material certificate 2
Withstand pressure test 4
Strength calculation sheet (JIS) 5
Traceability certificate 6
Non SI unit F
Mounting bracket H
Electrical connection: M20 × 1.5 adapter *1 T

Note) *1 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protection.

- 30 -
Azbil Corporation No. SS2-PTG300-0100

DIMENSIONS
[mm]

- 31 -
No. SS2-PTG300-0100 Azbil Corporation

Ferrule with cooling tower Ambient temperature limits

(1.5S, 2S cap nut type) Normal operating range
FM Explosion proof
FM Intrinsically safe
NEPSI
Water and KOSHA Flameproof
Flameproof
dust proof NEPSI Flameproof
(Ex d IICT6)
(Ex d II CT4,5)
ATEX Flameproof

-10 to +70°C -10 to +60°C -10 to +40°C

Transportation and storage temperature

-30 to +80°C

Temperature ranges of wetted parts

FM Explosion proof
FM Intrinsically safe
NEPSI NEPSI
Water and KOSHA Flameproof
Flameproof Flameproof
dust proof NEPSI Flameproof
(Ex d IICT5) (Ex d IICT6)
(Ex d II CT4)
ATEX Flameproof

-10 to +150°C -10 to +110°C -10 to +95°C -10 to +80°C

Measuring span/ Setting range/ Max. Ambient humidity limits

working pressure 5 to 100% RH
Max.
Model Measuring Setting
Working
Process Materials
Number span Range Connection
Pressure
Fill fluid
2.0 to 100-100 to
PTG7_K - _3 200 kPa • Propylene glycol
kPa +100 kPa

PTG7_K - _4
40 to 400 -100 to 800 kPa or
2S, 1.5S Wetted parts
kPa +400 kPa cap nut rating
-0.1 to +2 4 MPa or cap Diaphragm
PTG7_K - _5 0.2 to 2 MPa
MPa nut rating SUS316L

Accuracy / Temperature effect Others

SUS316
Model PTG7_ K- _3
± 0.5% F.S. (100 kPa > X > 20 kPa)
Case
Accuracy *1 ± (0.5 × 20 / X)% F.S. (20k Pa > X> 2 kPa) Aluminum alloy
Zero temperature 2S (Cap nut type) ± (2.5 × 40 / X +0.35)% Weight
effect per 30°C *1 1.5S (Cap nut type) ± (15.5 × 40 / X +0.35)% • 1.5S: Approx. 1.6 kg
Model PTG7_ K- _4 • 2S: Approx. 1.9 kg

Accuracy *1
± 0.5% F.S. (400 kPa > X > 80 kPa) Process connection
± (0.5 × 80 / X)% F.S. (80 kPa > X > 40 kPa)
• IDF 1.5S ferrule cap nut type
Zero temperature 2S (Cap nut type) ± (1.4 × 80 / X +0.35)% • IDF 2S ferrule cap nut type
effect per 30°C *1 1.5S (Cap nut type) ± (7.9 × 80 / X +0.35)%
For other specification, please refer to COMMON
Model PTG7_ K- _5 SPECIFICATIONS.
± 0.5% F.S. (2 MPa > X > 0.4 MPa)
Accuracy *1 ± (0.5 × 0.4 / X)% F.S. (0.4 MPa > X > 0.2 MPa)

Zero temperature 2S (Cap nut type) ± (0.6 × 0.4 / X +0.35)%

effect per 30°C *1 1.5S (Cap nut type) ± (1.9 × 0.4 / X +0.35)%

Note) *1: Within a range of URV > 0 and LRV > 0

- 32 -
 Azbil Corporation No. SS2-PTG300-0100

MODEL SELECTION
Smart pressure transmitter model PTG7XK
Process connection: Ferrule cap nut type with cooling tower
Measuring span 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa
Model number structure: Basic model number - Selection - Option1 - Option2
Selection Option1 Option2
Basic model number - - -

Product description Gauge pressure transmitter:

Ferrule type with cooling tower with PTG71K
SFN communication
Gauge pressure transmitter:
Ferrule type with cooling tower with PTG72K
HART Communication
-
Type of protection Water and dust proof: IEC IP67
N
Electrical connection:1/2NPT
FM Explosionproof and dust-ignition
D
Electrical connection:1/2NPT
FM Intrinsically safe
E
Electrical connection: 1/2 NPT
KOSHA Flameproof
K
Electrical connection: 1/2 NPT
NEPSI Flameproof and dust-ignition
L
Electrical connection:1/2 NPT
ATEX Flameproof
V
Electrical connection: M20 × 1.5
Measuring span 2.0 to 100 kPa (0.021 to 1.019 kgf/cm²)
3
(Applicable only for process connection 2S)
40 to 400 kPa (0.408 to 4.07 kgf/cm²) 4
0.2 to 2 MPa (2.04 to 20.3 kgf/cm²) 5
Material:
Diaphragm / wetted parts
SUS316L / SUS316L / Propylene glycol CB
other than diaphragm/fill
fluid
Process connection IDF 1.5S ferrule cap nut type AC3X
IDF 2S ferrule cap nut type AC4X
Option 1 -
No option X
Built-in digital indicator M
Corrosion-proof finish B
Wetted part finish Oil free finish G
Water and oil free finish H
Electrolytic grinding K
Passive state finish W
Option2 -
No option X
Test report 1
Material certificate 2
Withstand pressure test 4
Strength calculation sheet (JIS) 5
Traceability certificate 6
Non SI unit F
Mounting bracket H
Electrical connection: M20 × 1.5 adapter *1 T

Note) *1 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protec-
tion.

- 33 -
No. SS2-PTG300-0100 Azbil Corporation

DIMENSIONS
[mm]

- 34 -
Azbil Corporation No. SS2-PTG300-0100

Remote seal with ferrule type Ambient temperature limits

(1.5S, 2S clamp type) Normal operating range
Water and dust proof
FM Explosion proof
FM Intrinsically safe NEPSI
KOSHA Flameproof Flameproof
NEPSI Flameproof (Ex d IICT6)
(Ex d II CT4,5)
ATEX Flameproof

IDF 1.5 S -5 to +55°C -5 to +40°C

IDF 2 S -5 to +60°C -5 to +40°C

Transportation and storage temperature

-30 to +80°C

Temperature range of wetted parts

FM Explosion proof
FM Intrinsically safe
Measuring span/ Setting range/ Max. Water and KOSHA Flameproof
NEPSI NEPSI
Flameproof Flameproof
working pressure dust proof NEPSI Flameproof
(Ex d II CT4)
(Ex d IICT5) (Ex d IICT6)

Max. ATEX Flameproof

Model Measuring Setting Process
Working
Number span Range Connection -5 to +121°C -5 to +110°C -5 to +95°C -5 to +80°C
Pressure
2.0 to 100
-100 to +100 150°C for 60 minutes during steam cleaning for water
PTG7_T - _3 200 kPa 2S
kPa kPa and dust proof model
40 to 400
-100 to +400 800 kPa or
PTG7_T - _4
kPa kPa clamp rating Ambient humidity limits
2S, 1.5S
PTG7_T - _5 0.2 to 2 MPa
-0.1 to +2 4 MPa or 5 to 100% RH
MPa clamp rating
Materials
Accuracy / Temperature effect
Fill fluid
Model PTG7_ T- _3 • Propylene glycol
*1 ± 0.5% F.S. (100 kPa > X > 20 kPa)
Accuracy ± (0.5 × 20 / X)% F.S. (20 kPa > X > 2 kPa) Wetted parts
Zero temperature Diaphragm
2S (Clamp type) ± (11.5 × 40 / X +0.35)%
effect per 30°C *1 SUS316L

Model PTG7_ T- _4 Others

± 0.5% F.S. (400 kPa > X > 80 kPa)
SUS316
Accuracy *1 ± (0.5 × 80 / X)%F.S. (80 kPa > X > 40 kPa) Case
Zero temperature 2S (Clamp type) ± (5.9 × 80 / X +0.35)% Aluminum alloy
effect per 30°C *1 1.5S (Clamp type) ± (33.9 × 80 / X +0.35)%
Capillary cover
Model PTG7_ T- _5 Olefin
± 0.5% F.S. (2 MPa > X > 0.4 MPa)
Accuracy *1 ± (0.5 × 0.4 / X)%F.S. (0.4 MPa > X > 0.2 MPa) Weight
Approx. 1.8 kg (Capillary length 3 m)
Zero temperature 2S (Clamp type) ± (1.5 × 0.4 / X +0.35)%
effect per 30°C *1 1.5S (Clamp type) ± (7.1 × 0.4 / X +0.35)% Process connection
• IDF 1.5S ferrule clamp type
Note) *1: Within a range of URV > 0 and LRV > 0
• IDF 2S ferrule clamp type

For other specification, please refer to COMMON

SPECIFICATIONS.
Note) *1 Applicable only for water and dust
proof “N” and FM intrinsically safe
“E” in the type of protection.

- 35 -
No. SS2-PTG300-0100 Azbil Corporation

MODEL SELECTION
Smart pressure transmitter model PTG7XT
Process connection: Remote seal with ferrule clamp type
Measuring span: 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa
Model number structure: Basic model number - Selection - Option1 - Option2
Selection Option1 Option2
- - -

Product description Gauge pressure transmitter:

Ferrule type with remote seal PTG71T
with SFN Communication
Gauge pressure transmitter:
Ferrule type with remote seal PTG72T
with HART Communication
-
Type of protection Water and dust proof: IEC IP67
N
Electrical connection:1/2NPT
FM Explosionproof and dust-ignition
D
Electrical connection:1/2NPT
FM Intrinsically safe
E
Electrical connection: 1/2 NPT
KOSHA Flameproof
K
Electrical connection: 1/2 NPT
NEPSI Flameproof and dust-ignition
L
Electrical connection:1/2 NPT
ATEX Flameproof
V
Electrical connection: M20 × 1.5
Measuring span 2.0 to 100 kPa (0.021 to 1.019 kgf/cm²) 3
(Not applicable for process connection 1S)
40 to 400 kPa (0.408 to 4.07 kgf/cm²) 4
0.2 to 2 MPa (2.04 to 20.3 kgf/cm²) 5
Material:
Diaphragm / wetted parts
SUS316L/SUS316L/Propylene glycol CB
other than diaphragm/fill
fluid
Process connection IDF 1.5S ferrule clamp type AH3X
IDF 2S ferrule clamp type AH4X
Capillary length 1 m (with Olefin tube) E
3 m (with Olefin tube) G
5 m (with Olefin tube) J
Option 1 -
No option X
Corrosion-proof finish B
Built-in digital indicator M
Wetted parts finish Oil free finish G
Water and oil free finish H
Electrolytic grinding K
Passive state finish W
Option2 -
No option X
Test report 1
Material certificate 2
Withstand pressure test 4
Strength calculation sheet (JIS) 5
Traceability certificate 6
Non SI unit F
Mounting bracket H
Electrical connection: M20 × 1.5 adapter *1 T

Note) *1 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protection.

- 36 -
Azbil Corporation No. SS2-PTG300-0100

DIMENSIONS
[mm]

- 37 -
No. SS2-PTG300-0100 Azbil Corporation

Remote seal with ferrule type Ambient temperature limits

(1S, 2S cap nut type) Normal operating range
Water and dust proof
FM Explosion proof
FM Intrinsically safe NEPSI
KOSHA Flameproof Flameproof
NEPSI Flameproof (Ex d IICT6)
(Ex d II CT4,5)
ATEX Flameproof

IDF 1.5 S -5 to +55°C -5 to +40°C

IDF 2 S -5 to +60°C -5 to +40°C

Transportation and storage temperature

-30 to +80°C

Temperature range of wetted parts

FM Explosion proof
Measuring span/ Setting range/ Max. FM Intrinsically safe
NEPSI NEPSI
Water and KOSHA Flameproof
working pressure dust proof NEPSI Flameproof
Flameproof
(Ex d IICT5)
Flameproof
(Ex d IICT6)
(Ex d II CT4)
Max. ATEX Flameproof
Model Measuri Setting Process
Working
Number ng span Range Connection
Pressure -5 to +121°C -5 to +110°C -5 to +95°C -5 to +80°C
2.0 to -100 to +100
PTG7_T - _3 200 kPa 2S 150°C for 60 minutes during steam cleaning for water
100 kPa kPa
40 to 400 -100 to +400 800 kPa or cap
and dust proof model
PTG7_T - _4
kPa kPa nut rating
2S, 1.5S Ambient humidity limits
0.2 to 2 -0.1 to +2 4 MPa or cap
PTG7_T - _5 5 to 100% RH
MPa MPa nut rating

Accuracy / Temperature effect Materials

Model PTG7_ T- _3 Fill fluid
± 0.5% F.S. (100 kPa > X > 20 kPa) • Propylene glycol
Accuracy *1 ± (0.5 × 20 / X)% F.S. (20 kPa > X > 2 kPa)
Wetted parts
Zero temperature
2S (Cap nut type) ± (11.5×40 / X +0.35)% Diaphragm
effect per 30°C *1
SUS316L
Model PTG7_ T- _4 Others
*1 ± 0.5% F.S. (400 kPa > X > 80 kPa) SUS316
Accuracy ± (0.5 × 80 / X)% F.S. (80 kPa > X > 40 kPa)

Zero temperature 2S (Cap nut type) ± (5.9 × 80 / X +0.35)%

Case
effect per 30°C *1 1.5S (Cap nut type) ± (33.9 × 80 / X +0.35)% Aluminum alloy

Model PTG7_ T- _5 Capillary cover

± 0.5% F.S. (2 MPa > X > 0.4 MPa) Olefin
Accuracy *1 ± (0.5 × 0.4 / X)% F.S. (0.4 MPa > X > 0.2 MPa)
Weight
Zero temperature 2S (Cap nut type) ± (1.5 × 0.4 / X +0.35)% Approx. 2.3 kg (Capillary length 3 m)
effect per 30°C *1 1.5S (Cap nut type) ± (7.1 × 0.4 / X +0.35)%
Process connection
Note) *1: Within a range of URV > 0 and LRV > 0
• IDF 1.5S ferrule cap nut type
• IDF 2S ferrule cap nut type

For other specification, please refer to COMMON

SPECIFICATIONS.

- 38 -
Azbil Corporation No. SS2-PTG300-0100

MODEL SELECTION
Smart pressure transmitter model PTG7XT
Process connection: Remote seal with ferrule cap nut type
Measuring span 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa
Model number structure: Basic model number - Selection - Option1 - Option 2
Selection Option1 Option2
- - -

Product description Gauge pressure transmitter: Fer-

rule type with remote seal with PTG71T
SFN communication
Gauge Pressure Transmitter: Fer-
rule type with remote seal with PTG72T
HART Communication
-
Type of protection Water and dust proof: IEC IP67
N
Electrical connection:1/2NPT
FM Explosionproof and dust-ignition
D
Electrical connection:1/2NPT
FM Intrinsically safe
E
Electrical connection: 1/2 NPT
KOSHA Flameproof
K
Electrical connection: 1/2 NPT
NEPSI Flameproof and dust-ignition
L
Electrical connection:1/2 NPT
ATEX Flameproof
V
Electrical connection: M20 × 1.5
Measuring span 2.0 to 100 kPa (0.021 to 1.019 kgf/cm²) 3
40 to 400 kPa (0.408 to 4.07 kgf/cm²) 4
0.2 to 2 MPa (2.04 to 20.3 kgf/cm²) 5
Material:
Diaphragm / wetted parts
SUS316L / SUS316L / Propylene glycol CB
other than diaphragm/fill
fluid
Process connection IDF 1.5S ferrule cap nut type AC3X
IDF 2S ferrule cap nut type AC4X
Capillary length 1 m (with Olefin tube) E
3 m (with Olefin tube) G
5 m (with Olefin tube) J
Option 1 -
No option X
Corrosion-proof finish B
Built-in digital indicator M
Wetted parts finish Oil free finish G
Water and oil free finish H
Electrolytic grinding K
Passive state finish W
Option2 -
No option X
Test report 1
Material certificate 2
Withstand pressure test 4
Strength calculation sheet (JIS) 5
Traceability certificate 6
Non SI unit F
Mounting bracket H
Electrical connection: M20 × 1.5 adapter *1 T

Note) *1 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protection.

- 39 -
 No. SS2-PTG300-0100 Azbil Corporation

DIMENSIONS
[mm]

Please, read ‘Terms and Conditions’ from following URL before

the order and use.
http://www.azbil.com/products/bi/order.html
Specifications are subject to change without notice.

1-12-2 Kawana, Fujisawa 1st edition: Jun. 2001

Kanagawa 251-8522 Japan 18th edition: July 2015

http://www.azbil.com/ No part of this publication may be reproduced or duplicated

(11)
- 40 - without the prior written permission of Azbil Corporation.