Precision "Heavy Duty" Pressure Gauges: Trade Catalogue 2005
Precision "Heavy Duty" Pressure Gauges: Trade Catalogue 2005
Precision "Heavy Duty" Pressure Gauges: Trade Catalogue 2005
PAGE
INDEX 1
GENERAL INFORMATION 2
PRESSURE RECORDERS:
RPX bourdon tube system 26
ELECTRICAL DEVICES:
Minimum pressure ranges for electrical devices 32
HZ Contact devices 33
Microswitch HZ Contact devices 34
Add-on Contact devices 35
Options on contact devices 35
Built-in transmitter devices 35
Distributer :
■ ZEAL were established in 1888 to fulfill a demand for quality temperature and pressure instrumentation,
either mechanical and/or electronic e.g. Temperature and Pressure Gauges, PT-100, Thermocouples, Pressure
and Temperature Transmitters, Pressure and Temperature Switches, Bimetallic Thermometers, etc.
Products are manufactured to the relevant British/Din standards to ISO-9001 quality approvals.
■ To find the complete specification for a PRESSURE GAUGE refer to the following:
EXAMPLE : PAGE:
1. BASIC TYPE PBX100XA 3
2. PRESSURE RANGE 0 - 160 BAR 22
3. ELECTRICAL DEVICE M-1-HZ CONTACT 27 - 28
4. ANY OPTIONS BLOW-OUT DEVICE 24 - 25
■ Dimensions used in this catalogue are in: millimeters (mm).They are intended as a guide.
■ Other variations which are not mentioned in this catalogue are available on request.
■ Certificates of Calibration for all manufactured products are available. These certificates indicate
deviations from standards traceable to European N.K.O. or D.K.D. (Dutch/German National Standards).
The results are recorded on a certificate which include calibration date, instrument serial number, type number
and the N.K.O. or D.K.D. standard used. If required, calibration certificates from an independent CALIBRATION
LABORATORY can be supplied.
■ Material Certificates for all ZEAL manufactured products are available. These certificates indicate the
specifications of the materials used.
■ An efficient repair and sparepart service is provided at competitive rates for ZEAL products and products of
other manufacturers. Instruments for repair should be sent carriage paid and labelled with the senders name and
address, together with a brief description of the work required. We will advise you of the costs involved before
commencement of the repair.
E&OE
PAGE 2
PRESSURE GAUGES, STAINLESS CASE, BRASS INTERNALS
< 60 bar
PBX063XA-BI PBX100XA-BI PBX160XA-BI
A
> = 60-600 bar
PBX063XA-BI PBX100XA-BI PBX160XA-BI
< 60 bar
PBX063XB-BI PBX100XB-BI PBX160XB-BI
B
> = 60-600 bar
PBX063XB-BI PBX100XB-BI PBX160XB-BI
< 60 bar
PBX063XC-BI PBX100XC-BI PBX160XC-BI
C
> = 60-600 bar
PBX063XC-BI PBX100XC-BI PBX160XC-BI
< 60 bar
PBX063XH-BI PBX100XH-BI PBX160XH-BI
H
> = 60-600 bar
PBX063XH-BI PBX100XH-BI PBX160XH-BI
< 60 bar
PBX063XJ-BI PBX100XJ-BI PBX160XJ-BI
J
> = 60-600 bar
PBX063XJ-BI PBX100XJ-BI PBX160XJ-BI
PAGE 4
PRESSURE GAUGES, STAINLESS CASE, BRASS INTERNALS
< 60 bar
PBX063XA-BI PBX100XA-BI PBX160XA-BI
A
> = 60-600 bar
PBX063XA-BI PBX100XA-BI PBX160XA-BI
< 60 bar
PBX063XB-BI PBX100XB-BI PBX160XB-BI
B
> = 60-600 bar
PBX063XB-BI PBX100XB-BI PBX160XB-BI
< 60 bar
PBX063XC-BI PBX100XC-BI PBX160XC-BI
C
> = 60-600 bar
PBX063XC-BI PBX100XC-BI PBX160XC-BI
< 60 bar
PBX063XH-BI PBX100XH-BI PBX160XH-BI
H
> = 60-600 bar
PBX063XH-BI PBX100XH-BI PBX160XH-BI
< 60 bar
PBX063XJ-BI PBX100XJ-BI PBX160XJ-BI
J
> = 60-600 bar
PBX063XJ-BI PBX100XJ-BI PBX160XJ-BI
PAGE 4
PRESSURE GAUGES, ALL STAINLESS STEEL
ZEAL TYPE PBX, Economy Line-SI
STANDARD MODEL
ELEMENT : bourdon tube of AISI316Ti (1.4571)
SCALE : bar, kg/cm2, psi, kPa, standard EN range
CONNECTION : AISI316Ti (1.4571), Ø63mm: ¼" BSP or ¼"NPT
: AISI316Ti (1.4571), Ø100 and Ø160mm : ½" BSP or ½"NPT
CASE : AISI 304 (1.4301), fillable
BEZEL : bayonet lock ring polished
WINDOW : laminated safety glass
POINTER : standard pointer for Ø63mm
: micro adjustable for Ø100 and Ø160mm
CASE DIAMETER ( Ø in mm)
TYPE MODEL RANGE 63 100 160
< 60 bar
PBX063XA-SI PBX100XA-SI PBX160XA-SI
A
> = 60-600 bar
PBX063XA-SI PBX100XA-SI PBX160XA-SI
< 60 bar
PBX063XB-SI PBX100XB-SI PBX160XB-SI
B
> = 60-600 bar
PBX063XB-SI PBX100XB-SI PBX160XB-SI
< 60 bar
PBX063XC-SI PBX100XC-SI PBX160XC-SI
C
> = 60-600 bar
PBX063XC-SI PBX100XC-SI PBX160XC-SI
< 60 bar
PBX063XH-SI PBX100XH-SI PBX160XH-SI
H
> = 60-600 bar
PBX063XH-SI PBX100XH-SI PBX160XH-SI
< 60 bar
PBX063XJ-SI PBX100XJ-SI PBX160XJ-SI
J
> = 60-600 bar
PBX063XJ-SI PBX100XJ-SI PBX160XJ-SI
PAGE 5
"CLASS 0,25 TEST PRESSURE GAUGES, TYPE PBX-TG
ZEAL TYPE PBX-TG, with bourdon tube of copper-beryllium
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65
BOURDON TUBE : Copper/Beryllium
WINDOW : mineral glass 4 mm
DIAL : Mirrorscale aluminium, black figures on white
POINTER : knife edge aluminium, black
CONNECTION : ½"BSP or ½"NPT, AISI316Ti/1.4571
RANGE : from 0 - 1 upto 0-60 bar, acc. to EN 837-1
or from 0-15 psi upto 1.000 psi
ACCURACY : 0,25% F.S. / class 0,25
MOVEMENT : stainless steel AISI304/1.4301
CALIBRATION REPORT : included, minimal 10 points
OPTIONS / GRADUATIONS : see page 28-31
A
PBX-TG-160XA PBX-TG-250XA
B
PBX-TG-160XB PBX-TG-250XB
C
PBX-TG-160XC PBX-TG-250XC
D
PBX-TG-160XD PBX-TG-250XD
F
PBX-TG-160XF PBX-TG-250XF
H
PBX-TG-160XH PBX-TG-250XH
J
PBX-TG-160XJ PBX-TG-250XJ
bar / psi
DOUBLE
bar / kPa
SCALE
ect.
PAGE 6
"ALL-STAINLESS" SOLID-FRONT PRESSURE GAUGES, TYPE PBX-SF
ZEAL TYPE PBX-SF, full safety pattern according to EN 837-1
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 RANGE : -1/0 and 0-0,6 - 60 bar,
solid front & blow-out back acc. to EN 837-1 acc. to EN 837-1 (see page 28)
WETTED PARTS : bourdon tube + connection AISI316Ti/1.4571 for higher ranges (max. 4000 bar): see page 28
WINDOW : safety glass ACCURACY : case Ø 63 : ± 1.6% F.S. / class 1.6
DIAL : aluminium, black figures on white case Ø100 and Ø160 : ± 1.0% F.S./class 1
POINTER : aluminium, black MOVEMENT : AISI304/1.4301
CONNECTION : Ø63mm: ¼"BSP or ¼"NPT APPLICATION : general and heavy industry
Ø100 and Ø160mm : ½"BSP or ½"NPT OPTIONS : electrical contact, see page 33-35
CASE DIAMETER ( Ø in mm)
TYPE MODEL 63 100 160
A
PBX-SF063XA PBX-SF100XA PBX-SF160XA
B
PBX-SF063XB PBX-SF100XB PBX-SF160XB
D
PBX-SF063XD PBX-SF100XD PBX-SF160XD
PAGE 7
"ALL-STAINLESS" SOLID-FRONT PRESSURE GAUGES, TYPE PBX-SF-HP
CASE : bayonet lock, AISI304/1.4301, IP-65 RANGE : 0 - 4000 bar upto 0 - 6000 bar
solid front & blow-out back acc. to EN 837-1 for higher ranges (max. 7000 bar): see below
WETTED PARTS : spiral wound tube, HP160 ACCURACY : ± 1.0% F.S./class 1
WINDOW : safety glass ± 0.6% F.S./class 0.6 on demand
DIAL : aluminium, black figures on white MOVEMENT : AISI304/1.4301
POINTER : aluminium, black
CONNECTION : 9/16" UNF x18 H.P. female, AISI316Ti, 1.4571
A
PBX-SF-HP160XA
B
PBX-SF-HP160XB
D
PBX-SF-HP160XD
Lx GLYCERINE
PBX-SF-HP160Lx
PAGE 8
STAINLESS STEEL DUPLEX PRESSURE GAUGE, TYPE PBB
ZEAL TYPE PBB, with double bourdon-tube and two pointers
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 RANGES : -1/0 and 0-0,6 - 60 bar, acc. to EN 837-1 (see page 28)
WETTED PARTS : double bourdon tube AISI316Ti/1.4571 for higher ranges (max. 1600 bar), see page 28
WINDOW : mineral 4 mm MOVEMENT : brass
DIAL : aluminium, black figures on white ACCURACY : Ø 100 and Ø 160 mm± 1.0% F.S./class 1.0
POINTERS : two pointers, 1x black and 1x red, aluminium APPLICATIONS : general industry
CONNECTION : Ø100 and Ø160 mm : 2x ½"BSP or ½"NPT OPTIONS : see page 24-25, electrical contact or transmitters
4-20mA, 0-20mA, 0-10Vdc see page 32-35.
CASE DIAMETER xxx (Ø in mm)
TYPE MODEL 100 160
K
PBB100XK PBB160XK
L
PBB100XL PBB160XL
M
PBB100XM PBB160XM
N
PBB100XN PBB160XN
O
PBB100XO PBB160XO
H
PBB100XH PBB160XH
DIFFERENTIAL
SCALE 0 6
BAR
PAGE 9
STAINLESS STEEL LOW PRESSURE GAUGES, TYPE PCX
ZEAL TYPE PCX, with capsule measuring element
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-45 RANGE : Ø100: 0-25 upto 0-400 mbar, acc to EN 837-3: see page 29
WETTED PARTS : capsule AISI316/1.4401 Ø160: 0-4 upto 0-400 mbar, acc to EN 837-3: see page 29
WINDOW : mineral glass 4 mm Ø250: 0-10 upto 0-400 mbar, acc to EN 837-3: see page 29
DIAL : aluminium, black figures on white available in vacuum , compound and pressure
POINTER : aluminium, black ACCURACY : ± 1.6% F.S./class 1.6
CONNECTION : ½"BSP or ½"NPT, AISI316Ti/1.4571 APPLICATIONS : only for low-air and dry gases
MOVEMENT : nickel plated brass with external OPTIONS : see page 24-25, electrical contact only possible with
adjustment device case Ø160 mm: type I-Intervall see page 33
A
PCX100XA PCX160XA PCX250XA
B
PCX100XB PCX160XB PCX250XB
D
PCX100XD PCX160XD PCX250XD
E
PCX100XE PCX160XE PCX250XE
G
PCX100XG PCX160XG PCX250XG
H
PCX100XH PCX160XH PCX250XH
ELECTRICAL
"Hz" CONTACT ONLY for case Ø160 mm: type I-Intervall see page 33
DEVICE
NOTE : LIQUID FILLING NOT POSSIBLE WITH TYPE PCX
PAGE 10
DIAPHRAGM TYPE PRESSURE GAUGE, TYPE PMX
ZEAL TYPE PMX, all stainless steel with diaphragm
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 RANGES : diaphragm Ø160 mm: 25 upto 400 mbar, acc. to EN 837-3
WETTED PARTS : diaphragm AISI316Ti/1.4571 other on demand diaphragm Ø100 mm: 0,6 upto 25 bar, acc. to EN 837-3
WINDOW : mineral glass 4 mm vacuum, compound and pressure, (see page 28-29)
DIAL : aluminium, black figures on white ACCURACY : case Ø100 and Ø160 : ± 1.6% F.S./class 1.6
MOVEMENT : AISI304/1.4301 OPTIONS : see page 30-31, electrical contacts see page 32-35
½"BSP or ½"NPT,
PMXxxxXA-06 AISI316/1.4401
25 mbar
400 mbar
DIN-NW25 PN40
PMXxxxXA-09 AISI316/1.4401
DIN-NW50 PN16-40
PMXxxxXA-12 AISI316/1.4401
Ø100x83x6xM8
PMXxxxXA-16 AISI316/1.4401
0.6 bar 25 bar
1"ASA 150-600# or
PMXxxxXA-18 DIN-NW25 PN16-40
AISI316/1.4401
1½"ASA 150-600# or
PMXxxxXA-19 DIN-NW40 PN16-40 0.6 bar 25 bar
AISI316/1.4401
2"ASA 150-600# or
PMXxxxXA-20 DIN-NW50 PN16-40
AISI316/1.4401
1"ASA 150# or
PMXxxxXA-21 DIN-NW25 PN16
AISI316/1.4401
1½"ASA 150# or
PMXxxxXA-22 DIN-NW40 PN16 25 mbar 400 mbar
AISI316/1.4401
2"ASA 150# or
PMXxxxXA-23 DIN-NW50 PN16
AISI316/1.4401
OVERRANGE
UPTO 5 TIMES FULL SCALE (MAX. 40 bar) 25 mbar 25 bar
PROTECTION
FOR TYPE PMX WITH BACK CONNECTION: SEE NEXT PAGE
PAGE 11
ZEAL DIAPHRAGM TYPE PRESSURE GAUGE, TYPE PMX
TYPE PMX, stainless steel with diaphragm and back connection
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-45 RANGES : diaphragm Ø160 mm: 25 upto 400 mbar, acc. to EN 837-3
WETTED PARTS : diaphragm AISI316Ti/1.4571 diaphragm Ø100 mm: 0,6 upto 25 bar, acc. to EN 837-3
WINDOW : mineral glass 4 mm vacuum, compound and pressure (see page 28-29)
DIAL : aluminium, black figures on white ACCURACY : case Ø100 and Ø160 : ± 1.6% F.S./class 1.6
POINTER : aluminium, black APPLICATION : general and heavy industry
MOVEMENT : nickel plated brass with external adjustment device OPTIONS : see page 30-31, electrical contact only possible with
case Ø160 mm: type I-Intervall: see page 32-33
½"BSP or ½"NPT,
PMX100XE-02 AISI316/1.4401
0.6 bar 25 bar
½"BSP or ½"NPT,
PMX160XE-02 AISI316/1.4401
25 mbar 400 mbar
½"BSP or ½"NPT,
PMX100XG-02 AISI316/1.4401
0.6 bar 25 bar
½"BSP or ½"NPT,
PMX160XG-02 AISI316/1.4401
25 mbar 400 mbar-
DIN-NW25 PN40
PMX100XE-05 AISI316/1.4401
0.6 bar 25 bar
DIN-NW25 PN40
PMX100XE-06 PTFE LINING
DIN-NW50 PN40
PMX160XE-08 AISI316/1.4401
25 mbar 400 mbar
DIN-NW50 PN40
PMX160XE-09 PTFE LINING
40 mbar 400 mbar
PAGE 12
SQUARE AND RECTANGULAR PRESSURE GAUGES
ZEAL TYPE PPB, with bourdon tube for panel mounting
CASE : profile, glassfibre reinforced black Noryl CONNECTION : ¼"BSP or ¼"NPT female, AISI316Ti/1.4571
IP-45 RANGE : see table, higher pressure (max. 1000 bar) see page 28
WETTED PARTS : bourdon tube, see table MOVEMENT : see table
WINDOW : plexiglass ACCURACY : see table
DIAL : aluminium, black figures on white OPTIONS : see page 30-31, electrical contact, transmitters page 32-35
POINTER : aluminium, black
S
PPB72x72XS PPB96x96XS PPB144x144XS PPB192x192XS
V
PPB72x144XV PPB96x192XV
H
PPB144x72XH PPB192x96XH
PAGE 13
SQUARE AND RECTANGULAR LOW PRESSURE GAUGES
TYPE PPC, for panel mounting with capsule measuring element
CASE : profile, glassfibre reinforced black Noryl CONNECTION : ¼"BSP or ¼"NPT, female, AISI316Ti/1.4571
IP-45 RANGE : see table, acc. to EN, see page 29
WETTED PARTS : capsule, see table MOVEMENT : see table
WINDOW : plexiglass ACCURACY : see table
DIAL : aluminium, black figures on white APPLICATIONS : only for low-air and dry gases
POINTER : aluminium, black OPTIONS : see page 30-31, electrical devices: not possible
S
PPC72x72XS PPC96x96XS PPC144x144XS PPC192x192XS
V
PPC72x144XV PPC96x192XV
H
PPC144x72XH PPC192x96XH
72x72 96x96
WETTED PARTS AISI316Ti/1.4571
ALL DIMENSIONS
ELECTRIC LIGHT 12Vdc or 24Vdc with connector
INSIDE CASE
NOTE: LIQUID FILLING AND ELECTRICAL DEVICE NOT POSSIBLE WITH PPC
PAGE 14
"ALL-STAINLESS" DIAPHRAGM SEAL PRESSURE GAUGES, TYPE PBS
ZEAL TYPE PBS, with chemical seal
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 RANGE : -1/0 upto 0-60 bar acc. to EN 837-1 (see page 28)
WETTED PARTS : AISI316/1.440, other on demand high pressure ranges (max. 600 bar): see page 28
WINDOW : mineral glass 4 mm ACCURACY : case Ø 63 and Ø 80 mm: ±1.6% F.S./class 1.6
DIAL : aluminium, black figures on white case Ø 100 and Ø 160 mm: ±1.0% F.S. /class 1.0
POINTER : aluminium, black Tprocess : -20/+120 °C (-40°C upto +250°C on demand)
MOVEMENT : stainless steel AISI304/1.4301 OPTIONS : see page 24-25, electrical contact or transmitter 4-20 mA,
0-20mA, 0-10Vdc: see page 32-35
EXAMPLE: PBS100XA-06
MINIMUM MAXIMUM CASE DIAMETER xxx (Ø in mm)
TYPE SEAL MODEL DN PN PN 063 080 100 160
PBSxxxXA-01 ½"BSP/NPT 25 bar 600 bar N.A.
PBSxxxXA-02 ¾"BSP/NPT 16 bar 600 bar N.A.
PBSxxxXA-03 FLUSH DIAPHRAGM
1"BSP/NPT 1,6 bar 600 bar N.A.
1"BSP
PBSxxxXA-04 FEMALE
25 bar 600 bar N.A.
1L"BSP
PBSxxxXA-05 FEMALE
25 bar 600 bar N.A.
FLUSH DIAPHRAGM
½"BSP/NPT
PBSxxxXA-09 MALE
1 bar 100 bar
½"BSP/NPT
PBSxxxXA-10 MALE
100 bar 250 bar
INTERNAL DIAPHRAGM
½"BSP/NPT
PBSxxxXA-11 FEMALE
1 bar 100 bar
½"BSP/NPT
PBSxxxXA-12 FEMALE
100 bar 250 bar
INTERNAL DIAPHRAGM
1"ASA or 150# or
PBSxxxXA-13* NW25-DIN
1,6 bar
PN40
1½"ASA or 150# or
PBSxxxXA-14* NW40-DIN
1,6 bar
PN40
2"ASA or 150# or
PBSxxxXA-15* INTERNAL DIAPHRAGM NW50-DIN
1,6 bar
PN40
1"ASA or 150# or
PBSxxxXA-16* NW25-DIN
1,6 bar
PN40
1½"ASA or 150# or
PBSxxxXA-17* NW40-DIN
1 bar
PN40
2"ASA or 150l# or
PBSxxxXA-18* FLUSH DIAPHRAGM NW50-DIN
1 bar
PN40
OPTIONS EXTRA COSTS
PTFE (LINING)
FOR TYPES: XX= 16, 17 AND 18,other types on demand
WETTED PARTS
OFF-CENTRE BACK
PBSxxxXC-xx CONNECTION
EXAMPLE: PBSxxxXC-06
PAGE 15
"ALL-STAINLESS" PRESSURE GAUGES WITH CAPILLARY, TYPE PFS
ZEAL TYPE PFS, capillary tube with chemical seal
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 RANGE : -1/0.6 upto 0-60 bar acc. to EN 837-1 (see page 28)
WETTED PARTS : AISI316Ti/1.4571, others on demand higher pressure ranges (max. 600 bar): see page 28
WINDOW : mineral glass 4 mm ACCURACY : case Ø 63 and Ø 80 mm: ±1.6% F.S./class 1.6
DIAL : aluminium, black figures on white case Ø 100 and Ø 160 mm: ±1.0% F.S. /class 1.0
POINTER : aluminium, black Tprocess : -20/+120° Celcius (-40°C upto +400°C on demand)
MOVEMENT : stainless steel AISI304/1.4301 OPTIONS : see page 30-31, electrical contact or transmitter 4-20 mA,
CAPILLARY : AISI304/1.4301 plain or armoured PFSxxxXB-xx 0-20mA, 0-10Vdc: see page 32-35
MINIMUM MAXIMUM CASE DIAMETER xxx (Ø in mm)
TYPE SEAL MODEL DN PN PN 063 080 100 160
1"BSP
PFSxxxXB-01 TURNING 25 bar 600 bar N.A.
NIPPLE
1¼" BSP
PFSxxxXB-02 COUPLING 25 bar 600 bar N.A.
FLUSH DIAPHRAGM NUT
½"BSP/NPT
PFSxxxXB-03 MALE
1.6 bar 100 bar
½"BSP/NPT
PFSxxxXB-04 MALE
100 bar 250 bar
INTERNAL DIAPHRAGM
½"BSP/NPT
PFSxxxXB-05 FEMALE
1.6 bar 100 bar
½"BSP/NPT
PFSxxxXB-06 FEMALE
100 bar 250 bar
INTERNAL DIAPHRAGM
1"ASA or 150# or
PFSxxxXB-07* NW25-DIN
1.6 bar
PN16
1½"ASA or 150# or
PFSxxxXB-08* NW40-DIN
1.6 bar
PN40
2"ASA or 150# or
PFSxxxXB-09* INTERNAL DIAPHRAGM NW50-DIN
1.6 bar
PN40
1"ASA or 150# or
PFSxxxXB-10* NW25-DIN
2.5 bar
PN40
1½"ASA or 150# or
PFSxxxXB-11* NW40-DIN
1.6 bar
PN40
2"ASA or 150# or
PFSxxxXB-12* FLUSH DIAPHRAGM NW50-DIN
1.6 bar
PN40
WALL-MOUNTING BRACKET
PFSxxxXA-xx BOTTOM ENTRY
PAGE 16
TANK LEVEL PRESSURE GAUGES, TYPE PFS-TL
ZEAL TYPE PFS-TL
STANDARD MODEL
CASE : 160 mm, bayonet, AISI304/1.4301, IP-45
back flange, capillary bottom entry
WETTED PARTS : sensing element AISI316/1.4401
welded diaphragm
DIAL : aluminium, black figures on white
according to tank table, see sample
WINDOW : mineral glass 4 mm
POINTER : aluminium black
RANGE : 0 - 800 mmWG upto 0 - 10.000 mmWG
ACCURACY : ± 1.6% F.S./class 1.6
CAPILLARY : red copper with yellow PVC cover
MOVEMENT : nickel plated brass
ES
PFS-TL160XB-ES
¾" BSP coupling nut
EM
PFS-TL160XB-EM
¾" BSP coupling nut
IM
PFS-TL160XB-IM
Tank wall mounting
FL
PFS-TL160XB-FL
Flange 4"ANSI 150 lbs RF
EXTRA COSTS
Capillary Capillary Cover First 1000 mm Per 1000 mm extra
d
STANDARD red copper Yellow PVC
d = 6 mm
d
ARMOURED Armour
red copper
CAPILLARY AISI304/1.4301
d = 6 mm
PAGE 17
"ALL-STAINLESS" SANITARY PRESSURE GAUGES, TYPE PBQ
ZEAL TYPE PBQ, with sanitary chemical seal
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301 RANGE : from -1/0 upto 0-40 bar, acc. to EN-837-1 (see page 28)
IP-65 ACCURACY : case Ø 63 and Ø 80 mm: ±1.6% F.S./class 1.6
WETTED PARTS : flush diaphragm, AISI316Ti/1.4571 case Ø 100 and Ø 160 mm: ±1.0% F.S. /class 1.0
WINDOW : mineral glass 4 mm Tprocess : -20°/+120° Celcius (-40°C upto 250°C on demand)
DIAL : aluminium, black figures on white OPTIONS : see page 30-31, electrical contact or transmitter 4-20 mA,
POINTER : aluminium, black 0-20mA, 0-10Vdc: see page 32-35
MOVEMENT : stainless steel AISI304/1.4301
PBQxxxXA-xx
SEAL MINIMUM CASE DIAMETER xxx (Ø in mm)
TYPE MODEL NORM DN PN 063 080 100 160
PBQxxxXA-01 DIN-11851 1"-NW25 1.6 bar
OFF-CENTRE BACK
PBQxxxXC-xx CONNECTION
PAGE 18
"ALL-STAINLESS" SANITARY PRESSURE GAUGES, TYPE PFQ
ZEAL TYPE PFQ, capillary tube with sanitary chemical seal
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 RANGE : -1/0.6 upto 0-40 bar acc. to EN 837-1 (see page 28)
WETTED PARTS : flush diaphragm, AISI316Ti/1.4571 ACCURACY : case Ø 63 and Ø 80 mm: ±1.6% F.S./class 1.6
WINDOW : mineral glass 4 mm case Ø 100 and Ø 160 mm: ±1.0% F.S. /class 1.0
DIAL : aluminium, black figures on white Tprocess : -20/+120° Celcius (-40°/+400°C on demand)
POINTER : aluminium, black OPTIONS : see page 30-31, electrical contacts and/or transmitters
MOVEMENT : stainless steel AISI304/1.4301 4-20mA, 0-20mA, 0-10Vdc: see page 32-35
CAPILLARY : AISI321/1.4541 plain or armoured PFQxxxXB-xx
SEAL MINIMUM CASE DIAMETER xxx (Ø in mm)
TYPE NORM MODEL DN PN 063 080 100 160
PFQxxxXB-01 DIN 11851 1"-NW25 1.6 bar
SMS 1145
PFQxxxXB-06 1½"-NW40 1.6 bar
APV-RJT (BS)
PFQxxxXB-10 1½"-NW40 1.6 bar
IDF-ISS ISO-2853
PFQxxxXB-14 1½"-NW40 1.6 bar
ISO-2852
PFQxxxXB-18 1" - 1½" 1.6 bar
FRONT FLANGE
PFQxxxXD-xx BOTTOM ENTRY
0 0 0 0
MOUNTING
BEZEL AND U-
PFQxxxXH-xx CLAMP, OFF-
CENTRE BACK
ENTRY
FRONT FLANGE,
PFQxxxXJ-xx OFF-CENTRE
BACK ENTRY
PAGE 19
ALL-STAINLESS" PRESSURE GAUGES FOR HOMOGENISERS
TYPE PBR, chemical seal with flush diaphragm and built-in pulsation dampener
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 RANGE : 0 + 25 upto 0 + 60 bar, standard acc. to EN 837-1 (see page 28)
WETTED PARTS : flush diaphragm, AISI316Ti/1.4571 higher pressure ranges (max. 1000 bar): see page 28
WINDOW : mineral glass 4 mm ACCURACY : case Ø 100 and Ø 160 mm: ±1.0% F.S. /class 1.0
DIAL : aluminium, black figures on white Tprocess : -20°/+120° Celcius (-40°C upto +250°C on demand)
POINTER : aluminium, black OPTIONS : see page 30-31, electrical contact or transmitter 4-20 mA,
MOVEMENT : stainless steel AISI304/1.4301 0-20mA, 0-10Vdc: see page 32-35
WITHOUT
PBRxxxXA-01
FLANGE
WITH FLANGE
95x43x28 mm with
PBRxxxXA-02
2 holes Ø17 mm
on pitch 60 mm
TYPE PBT, finger type chemical seal with built-in pulsation dampener
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 RANGE : 0 + 16 upto 0 + 60 bar, standard acc. to EN 837-1 (see page 28)
WETTED PARTS : tubular probe ±100 mm, AISI316Ti/1.4571 high pressure ranges (max. 1000 bar): see page 28
WINDOW : mineral glass 4 mm ACCURACY : case Ø 100 and Ø 160 mm: ±1.0% F.S. /class 1.0
DIAL : aluminium, black figures on white Tprocess : -20°/+120° Celcius (-40°C upto +250°C on demand)
POINTER : aluminium, black OPTIONS : see page 30-31, electrical contact or transmitter 4-20 mA,
MOVEMENT : stainless steel AISI304/1.4301 0-20mA, 0-10Vdc: see page 32-35
EXAMPLE: PBRxxxXC-01
CASE GLYCERINE FILLED (in combination with
PBxxxxLx-xx electrical device: OIL see page 35)
PAGE 20
STAINLESS STEEL LOW-DIFFERENTIAL PRESSURE GAUGE, TYPE PCD
ZEAL TYPE PCD, with capsule measuring element
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-66 RANGE : case Ø100: 0-25 upto 0-400 mbar
WETTED PARTS : capsule AISI316Ti/1.4571 case Ø160: 0-6 upto 0-400 mbar
WINDOW : macrolon 4 mm STATIC PRESSURE: : case Ø100: maximum 1.0 bar
DIAL : aluminium, black figures on white case Ø160: maximum 1.0 bar
POINTER : aluminium, black ACCURACY : ± 1.6% F.S./class 1.6
CONNECTION : 2x ½"BSP or ½"NPT, AISI316Ti/1.4571 APPLICATIONS : only for clean air and dry gases
MOVEMENT : nickel plated brass OPTIONS : see page 30-31
CASE DIAMETER (Ø in mm)
TYPE MODEL 100 160
K
PCD100XK PCD160XK
L
PCD100XL PCD160XL
M
PCD100XM PCD160XM
N
PCD100XN PCD160XN
O
PCD100XO PCD160XO
H
PCD100XH PCD160XH
PAGE 21
STAINLESS STEEL DIFFERENTIAL PRESSURE GAUGE, TYPE PBD
ZEAL TYPE PBD, with bourdon-tube system
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-66 AVAILABLE DIFFERENTIAL PRESSURE RANGES:
WETTED PARTS : double bourdon tube AISI316Ti/1.4571 DIFFERENTIAL MAX. STATIC PRESSURE
WINDOW : mineral 4 mm 0 - 0.6 bar 3 bar
DIAL : aluminium, black figures on white 0 - 1 bar 4 bar
POINTER : aluminium, black 0 - 1.6 bar 6 bar
CONNECTION : 2x ½"BSP or ½"NPT AISI316Ti/1.4571 0 - 2.5 bar 10 bar
MOVEMENT : AISI304/1.4301 0 - 4 bar 16 bar
ACCURACY : ± 1.6% F.S./class 1.6 0 - 6 bar 25 bar
APPLICATIONS : general industry 0 - 10 bar 30 bar
OPTIONS : see page 30-31, electrical contacts and 0 - 16 bar 40 bar
mechanical transmitters: see page 32-35 POINTER DEFLECTION BETWEEN 120° AND 180°
K
PBD100XK PBD160XK
L
PBD100XL PBD160XL
M
PBD100XM PBD160XM
N
PBD100XN PBD160XN
O
PBD100XO PBD160XO
H
PBD100XH PBD160XH
PAGE 22
STAINLESS STEEL DIFFERENTIAL PRESSURE GAUGE, TYPE PMD
ZEAL TYPE PMD, diaphragm system with two measuring chambers
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 : Ø100 : 0-100 upto 400 mbar, max. static 100 bar
DIFFERENTIAL RANGE
WETTED PARTS : diaphragm AISI316Ti/1.4571 Ø100 : 0-0,6 upto 25 bar, max. static 100 bar
WINDOW : mineral glass (4 mm) Ø160 : 0-0,6 upto 25 bar, max. static 100 bar
DIAL : aluminium, black figures on white Ø160 : 0-25 upto 400mbar, max. static 25 bar
POINTER : aluminium, black ACCURACY : case Ø100 and Ø160 : ± 1.6% F.S./class 1.6
CONNECTION : 2x ½"BSP or ½"NPT, AISI316/1.4401 APPLICATION : general and heavy industry
MOVEMENT : AISI304/1.4301 OPTIONS : see page 30-31, electrical contacts and
mechanical transmitters: see page 32-35
K
PMD100XK-low PMD100XK PMD160XK-low PMD160XK
L
PMD100XL-low PMD100XL PMD160XL-low PMD160XL
M
PMD100XM-low PMD100XM PMD160XM-low PMD160XM
N
PMD100XN-low PMD100XN PMD160XN-low PMD160XN
O
PMD100XO-low PMD100XO PMD160XO-low PMD160XO
Lx
LIQUID FILLED CASE:
GLYCERINE
(in combination with electrical
device OIL: see page 35) PMD100Lx-low PMD100Lx PMD160Lx-low PMD160Lx
"Hz"
EXCLUDING "Hz" CONTACT
CONTACT (see page 33) O.D. O.D.
DEVICE
PAGE 23
STAINLESS STEEL DIFFERENTIAL PRESSURE GAUGE, TYPE POD
TYPE POD, with double diaphragm system, max. st. press. 100 bar
max. overload 100 bar on both sides
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 MOVEMENT : AISI304/1.4301
WETTED PARTS : diaphragms duratherm DIFFERENTIAL RANGE : 0-0,6 upto 25 bar
other AISI316/1.4401 ACCURACY : ± 1.6% F.S./class 1.6
WINDOW : safety glass STATIC PRESSURE : max. 100 bar
DIAL : aluminium, black figures on white OVERLOAD : both sides upto 100 bar
POINTER : aluminium, black APPLICATION : general and heavy industry
CONNECTION : 2 x ¼"NPT female, AISI316Ti/1.4571 OPTIONS : electrical contacts and
at pitch 54 mm mechanical transmitters
manifolds, swivel adapters
CASE DIAMETER (Ø in mm)
TYPE MODEL 100 160
K
POD100XK POD160XK
L
POD100XL POD160XL
Y
POD100XY POD160XY
2" yoke, horizontal or vertical
OPTION EXTRA COSTS
Lx
LIQUID FILLED CASE: GLYCERINE
(in combination with electrical contact:
PAGE 24
DIAPHRAGM SEAL DIFFERENTIAL PRESSURE GAUGES, TYPE POD
ZEAL TYPE POD, with 2 x chemical seals
STANDARD MODEL
CASE : bayonet lock, AISI304/1.4301, IP-65 MOVEMENT : AISI304/1.4301
with backflange (wall mounting) DIFFERENTIAL RANGE :min. 0-1 bar upto 0-25 bar
WETTED PARTS : AISI316/1.4401 ACCURACY : ± 1.6% F.S./class 1.6
WINDOW : safety glass STATIC PRESSURE : see below
DIAL : aluminium, black figures on white OVERLOAD : both sides upto static pressure
POINTER : aluminium, black APPLICATION : general and heavy industry
CAPILLARY : 2 x 1.000 mm, AIS321/1.4301 OPTIONS : electrical contacts, on page 33
CONNECTION : 2 x chemical seal see below
EXAMPLE: POD100XL-09
SEAL MAXIMUM CASE DIAMETER xxx (Ø in mm)
TYPE SEAL MODEL CONNECTION PN 100 160
PODxxxXL-06 ½"BSP/NPT 40 bar
½"BSP/NPT
PODxxxXL-11 FEMALE
100 bar
NW25-DIN, 4xM12
PODxxxXL-16 thread holes
PN 40
PODxxxXL-18 NW50-DIN PN 40
example: POD100XY-xx
"Hz" CONTACT
EXCLUDING "Hz" CONTACT (see page 33) ON DEMAND ON DEMAND
DEVICE
PAGE 25
STAINLESS STEEL PRESSURE RECORDERS
ZEAL TYPE RPX, with mechanical spring wound clock
STANDARD MODEL
CASE : AISI316 / 1.4401 CHARTS 50 pcs. : Ø166mm for 192 x 192mm,
WETTED PARTS : bourdon tube, AISI316Ti/1.4571 Ø223 for 288 x 288 mm
WINDOW : plexiglass CONNECTION : ½"BSP or ½"NPT, AISI316Ti/1.4571
DIAL : transparent with black figures RANGE : -1/+0,6 upto 0-60 bar, acc. to DIN,
PEN OPERATION : single or double-pen, writing with for higher ranges, see page 28
long-life fiber pens on disc MOVEMENT : brass
CLOCKWORK : mechanical spring wound, 1-, 4-, 12- ACCURACY : ±1.0%F.S./class 1.0
24-hour or 7 day rotation. OPTIONS : see page 30-31
CASE DIMENSIONS
TYPE MODEL
192 x 192 mm 288 x 288 mm
H
PANEL MOUNTING RPX192x192XH RPX288x288XH
B
SURFACE MOUNTING RPX192x192XB RPX288x288XB
T
TRANSPORTABLE RPX192x192XT RPX288x288XT
CASE DIMENSIONS
OPTIONS 192 x 192 mm 288 x 288 mm
DOUBLE MEASURING SYSTEM
RPX-DUPLEX AISI316Ti/1.4571
PAGE 26
"SUB SEA" PRESSURE GAUGES, TYPE PBX-SS
ZEAL TYPE PBX-SS, with pressure tight solid bar stock case
STANDARD MODEL
CASE : screwed bezel, AISI316/1.4401, RANGE : 0-6 upto 0-60 bar, acc. to EN 837-1 (see page 28)
pressure tight for depths down to see below for higher ranges (max. 1600 bar): see page 28
WETTED PARTS : bourdon tube + connection AISI316Ti/1.4571 ACCURACY : case Ø 63 : ± 1.6% F.S. / class 1.6
WINDOW : armoured glass 19mm thick case Ø100 and Ø160 : ± 1.0% F.S./class 1
DIAL : aluminium, black figures on white MOVEMENT : AISI304/1.4301
POINTER : aluminium, black APPLICATION : for operating at great depths of sea water
CONNECTION : Ø63mm: ¼"BSP or ¼"NPT and in hyperbaric conditions
Ø100 and Ø160mm : ¼"BSP or ¼"NPT OPTIONS : see page 30-31
CASE DIAMETER ( Ø in mm)
TYPE MODEL 63 (upto 1200m) 100 (upto 900 m) 160 (upto 450 m)
A
PBX-SS063XA PBX-SS100XA PBX-SS160XA
B
PBX-SS063XB PBX-SS100XB PBX-SS160XB
C
PBX-SS063XC PBX-SS100XC PBX-SS160XC
D
PBX-SS063XD PBX-SS100XD PBX-SS160XD
J
PBX-SS063XJ PBX-SS100XJ PBX-SS160XJ
PAGE 27
STANDARD PRESSURE RANGES FOR TYPES:
PBX, PBX-TG, PBX-SF, PBB, PMS, PMX, PPB, PBS, PFS, PBQ, PFQ, PBR, PBT, RPX, PBX-SS
PRESSURE RANGES EXTRA COSTS
SCALE DIVISION
CASE DIMENSIONS ( in mm)
(in bar)***** OPTION
only
cl. 1.0 cl. 0.6 PBX-TG 192x192 72x144 192x96
Ø 63 Ø 80 Ø 100 Ø 160 Ø 250 72x72 96x96 144x144
cl. 1.6 cl. 0.5 cl. 0.3 288x288 144x72 96x192
cl 0.25
PAGE 28
STANDARD PRESSURE RANGES FOR TYPES:
PCX, PMS, PMX, PPC, PCD, PMD
PRESSURE RANGES
SCALE DIVISION CASE DIMENSIONS (in mm)
(in mbar) ** cl. 1.6
option
Ø 100 Ø 160 Ø 250 72x72 96x96 144x144 192x192
72x144 192x96
cl. 1.0 144x72 96x192
-4 ...0 0 ...4 0.1 0.1 × • × × × • • × •
-6 ...0 0 ...6 0.1 0.1 × • × × × • • • •
-10 ...0 0 ...10 0.2 0.2 × • • × × • • • •
-16 ...0 0 ...16 0.5 0.5 × • • × × • • • •
-25 ...0 0 ...25 0.5 0.5 • • • × • • • • •
-40 ...0 0 ...40 1 1 • • • • • • • • •
-60 ...0 0 ...60 1 1 • • • • • • • • •
-100 ...0 0 ...100 2 2 • • • • • • • • •
-160 ...0 0 ...160 5 5 • • • • • • • • •
-250 ...0 0 ...250 5 5 • • • • • • • • •
-400 ...0 0 ...400 10 10 • • • • • • • • •
-2.5 ...1.5 -1.5 ...2.5 0.1 0.1 × • × × × • • × •
-4 ...2 -2 ...4 0.1 0.1 × • × × × • • • •
-6 ...4 -4 ...6 0.2 0.2 × • • × × • • • •
-10 ...6 -6 ...10 0.5 0.5 × • • × × • • • •
-15 ...10 -10 ...15 0.5 0.5 • • • × • • • • •
-25 ...15 -15 ...25 1 1 • • • • • • • • •
-40 ...20 -20 ...40 1 1 • • • • • • • • •
-60 ...40 -40 ...60 2 2 • • • • • • • • •
-100 ...60 -60 ...100 5 5 • • • • • • • • •
-150 ...100 -100 ...150 5 5 • • • • • • • • •
-250 ...150 -150 ...250 10 10 • • • • • • • • •
NON STANDARD RANGES:
e.g. 0-50 mbar etc.
DOUBLE SCALES
e.g. mbar/mmWC, mbar/Pa, etc.
ACCURACY
±1.6% F.S. / class 1.6 • • • • • • • • •
±1.0% F.S. / class 1.0 * ×
Mirrorscale × × × × × × ×
Calibration certificate pressure gauge (Traceable to N.K.O.) (standard for PBX-TG page 6)
Calibration certificate pressure gauge with transmitter (see page 35) (Traceable to N.K.O.) N.A. N.A.
Calibration certificates for type PBB (duplex) (Traceable to N.K.O.) N.A. N.A.
PAGE 29
ZEAL'S OPTIONS ON PRESSURE GAUGES
EXTRA COSTS
CASE CONNECTIONS CASE & BEZEL
TYPE
DIMENSIONS
(in mm) 1/2"BSP max.
M16x1.5 H.P. 9/16"UNFx18 BACK / FRONT
1/8"BSP/NPT 1/4"BSP/NPT 1600 bar, 3/8"BSP/NPT M20x1.5 max. AISI316 /
female max. H.P. female FLANGE
max. 400 bar max. 1000 bar 1/2"NPT max. max. 1000 bar 1600 bar 1.4401 * AISI316/1.4401*
7000 bar max. 7000 bar
1000 bar
063 • ×
080 • × ×
PBX 100 •
160 •
250 • × ×
063 • O ×
PBX-SF 100 • O
160 • O
PBB
100 • × ×
160 • × ×
100 • × ×
PCX 160 • × ×
250 • × × × ×
PMX
100 • × × ×
160 • × × ×
square • × × × ×
PPB - PPC
rectangular • × × × ×
PBS - PBQ 063
PFS - PFQ 080 ON DEMAND: SEE ALSO PAGE 15-19 × ×
100
160
100 SEE PAGE 20 ×
PBR - PBT
160 ×
100 • × ×
PCD
160 • × ×
100 • × × × ×
PBD
160 • × × × ×
100 • × × × ×
PMD -POD
160 • × × × ×
RPX ALL • × ×
063 • • •
PBX-SS 100 • • •
160 • • •
× NOT AVAILABLE • STANDARD O ON DEMAND * Not possible in combinations with contacts or transmitters
PAGE 30
ZEAL'S OPTIONS ON PRESSURE GAUGES
EXTRA COSTS
WINDOW
CASE MATERIAL BLOW- OUT POINTERS MEASURING SYSTEM
TYPE
DIMENSIONS DRAG
PULSATION
(in mm) LAMINATED PLUG * INDEX POINTER in OIL & MONEL OVERLOAD
PMMA - DRAG DAMPER
SECURIT SAFETY DISC (LIQUID ADJUSTABLE POINTER ON combination GREASE WETTED 2x F.S. other
PLEXIGLASS POINTER AISI316
GLASS FILLED) GLASS with HZ FREE PARTS on demand
1.4401
contact
PBX 063 ×
080 ×
100
PBX-TG 160
250 × ×
063 × × • × × ×
PBX-SF 100 × × • × ×
160 × × • × ×
100 ×
PBB
160 ×
100 × O × ×
see
160 × O × × page 10
PCX 250 × × × ×
100 × × see page
PMX 11-12
160 × ×
PPB square • × × × × × O
PPC rectangular • × × × × × × × × × O
PBS 063 × × O O
PBQ 080 × × × O O
PFS 100 O O
PFQ 160 O O
PBR 100 O O
PBT 160 O O
100 × × × × × × × × × see
PCD
page 21
160 × × × × × × × × ×
100 × ×
PBD
160 × ×
100 × × ×
PMD
160 × × ×
100 × × × ×
POD
160 × × × ×
RPX ALL × × × × • × × × × × ×
063 × • × × × × × ×
100 × • × × × × × ×
PBX-SS 160 × • × × × × × ×
× NOT AVAILABLE • STANDARD O ON DEMAND * WITH COMPENSATING DIAPHRAGM
PAGE 31
MINIMUM PRESSURE RANGE FOR PRESSURE GAUGES WITH ELECTRICAL DEVICE
PT-x
TYPE OF MECHANICAL
S-x S-xx S-xxx M-x M-xx M-xxx I-x I-xx I-xxx P-x P-xx (max.
TYPE CONTACT TRANSMITTERS
1600 bar)
case
dimensions MINIMUM RANGE (IN bar)
PBX 100 1 1,6 4 1 1,6 4 1 1,6 1,6 1 1,6 1 1,6
PBQ 100 1,6 1,6 4 1,6 1,6 4 1,6 1,6 1,6 1,6 1,6 1,6 2,5
160 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 1,6 2,5
PBS 100 1,6 1,6 4 1,6 1,6 4 1,6 1,6 1,6 1,6 1,6 1,6 2,5
160 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 1,6 2,5
PFQ 100 1,6 1,6 4 1,6 1,6 4 1,6 1,6 1,6 1,6 1,6 1,6 2,5
160 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 1,6 2,5
PFS 100 1,6 1,6 4 1,6 1,6 4 1,6 1,6 1,6 1,6 1,6 1,6 2,5
160 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 1,6 2,5
PBD 100 1,6 1,6 4 1,6 1,6 4 1,6 1,6 1,6 1,6 1,6 1,6 ×
160 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 1,6 ×
PMD 100 1,6 1,6 4 1,6 1,6 4 1,6 1,6 1,6 1,6 1,6 1,6 ×
160 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 2,5 1,6 1,6 1,6 ×
PMX 100 1 1,6 4 1 1,6 4 1 1,6 1,6 1 1,6 1 ×
160 1 1,6 2,5 1 1,6 2,5 1 1,6 1,6 1 1,6 1 ×
PMX-E/G* 160 × × × × × × × 1,6 × × × × ×
PBR 100 25 25 25 25 25 25 25 25 25 25 25 25 25
160 25 25 25 25 25 25 25 25 25 25 25 25 25
PBT 100 16 16 16 16 16 16 16 16 16 16 16 16 16
160 16 16 16 16 16 16 16 16 16 16 16 16 16
case
TYPE dimensions MINIMUM RANGE (in mbar)
PCX* 160 × × × × × × × 10 × × × × ×
PMX 100 40 100 250 40 100 250 40 100 100 40 100 × ×
160 40 100 250 40 100 250 40 100 250 40 100 × ×
PMX-E/G* 160 × × × × × × × 40 × × × × ×
PMD 160 40 100 250 40 100 250 40 100 100 40 100 × ×
PPC* 144x144 × × × × × × × 10 × × × × ×
* PCX, PPC and PMX-E/G only possible with inductive "INTERVALL" Contact type : I-intervall × NOT POSSIBLE
** Only possible on one pointer
*** Only possible with stainless steel bourdon tube
PAGE 32
CONTACT DEVICES FOR PRESSURE GAUGES
ZEAL BUILT-IN EXECUTION (HZ = contact device under the dial)
DIN16085/16196 Switch function in clockwise direction EXTRA COSTS
TYPE CASE DIMENSIONS (in mm)
STANDARD CONTACT (=10W/~18VA), TYPE: S Ø 100 Ø 160 96 x 96 144 x 144 72 x 144
S -1 contact closes
S -2 contact opens
INDUCTIVE CONTACT (=8V, Ri=1 kohm, EEx ib IIC T6), TYPE: I Ø 100 Ø 160 96 x 96 144 x 144 72 x 144
I -1 contact closes (operating current)
I -2 contact opens
I -x+SN single contact with safety oscillator (SN)
PAGE 33
PRESSURE GAUGE WITH
LOW HYSTERESIS BUILT-IN MICROSWITCH TYPE Q
1
Q - 3 Hz SINGLE
2 1 3
Q - 33 Hz DOUBLE
2 1 3 5 4 6
PAGE 34
ADD-ON UNITS WITH ELECTRICAL CONTACTS FOR PRESSURE GAUGES
ADD-ON UNIT (contact device on top of dial) with PG cable conduit and 1500 mm cable
DIN16085/16196 Switch function in clockwise direction EXTRA COSTS
TYPE CASE DIMENSIONS (in mm)
STANDARD ADD-ON CONTACT (=10W/~18VA), TYPE: S Ø 100 Ø 160
S -1 contact closes
S -2 contact opens
S -3 single change-over contact (SPDT)
S -11 1st contact closes, 2nd contact closes
S -12 1st contact closes, 2nd contact opens
S -21 1st contact opens, 2nd contact closes
S -22 1st contact opens, 2nd contact opens
S- xx+GS double acting contact with separate circuits
S -xxx triple acting contact, 1=closes, 2=opens
MAGNETIC ADD-ON CONTACT (=30W/~50VA), TYPE: M Ø 100 Ø 160
M -1 contact closes
M -2 contact opens
M -3 single change-over contact (SPDT)
M -11 1st contact closes, 2nd contact closes
M -12 1st contact closes, 2nd contact opens
M -21 1st contact opens, 2nd contact closes
M -22 1st contact opens, 2nd contact opens
M -xx+GS double acting contact with separate circuits
M -xxx triple acting contact, 1=closes, 2=opens
INDUCTIVE ADD-ON CONTACT (=8V, Ri=1 kohm, EEx ib IIC T6), TYPE: I Ø 100 Ø 160
I -1 contact closes (operating current)
I -2 contact opens
I -x+SN single contact with safety oscillator (SN)
I -11 1st contact closes, 2nd contact closes
I -12 1st contact closes, 2nd contact opens
I -21 1st contact opens, 2nd contact closes
I -22 1st contact opens, 2nd contact opens
I -xx+SN double contact with safety oscillator (SN)
PAGE 35
ZEAL
The Gauge of Quality
Distributer :