JSG General Line Catalogue PDF

JSG Industrial Systems
GENERAL LINE CATALOGUE 2016
quality industry solutions

High quality
JSG INDUSTRIAL SYSTEMS
hand tools & In 1921, the foundation of the John Sample Group of companies
equipment commenced as the automotive aftermarket supplier to the emerging

Australian automotive manufacturing industry. Through those early
which guarantee days, the John Sample Group became involved in many different
products and delivering brands such as:
performance.
Mann Piston Rings
Federal Mogul Bearing
Blackhawk Hand Tools and Hydraulic Equipment
For all your

Porto-Power Hydraulic Equipment
Hoyts Dashboard Ammeters Instruments
service, repair

Van Cleef Bros Automotive Chemicals
Fitzgerald Gaskets
& maintenance The following decades saw the emergence of products manufactured
by the John Sample Group. Brands such as:
needs. Gee Jay Works products
Vane Electrical Instruments
Auto Lab Test Instruments
They also represented Bradbury Hoists.
Today, JSG Industrial systems is proud to offer world class

products manufactured from trusted European and North American
equipment brands such as Faicom, All-Flo, GPI Lubrication and
Metering, Lincoln and Mityvac.
This General Line catalogue offers products typically found in

workshops, maintenance sheds and fluid handling applications; in
industries such as Automotive Servicing, Fuel, Agriculture, Food and
Beverage Manufacturing and MRO.
All the products listed are stocked locally, supplied locally and
supported locally through our JSG branch offices and an extensive
regional distribution network.
CONTENTS
GREASE 4 WATER & CHEMICAL 37
Grease Nipples / Trico Spectrum Grease Water & Chemical Pump Layout / Water &
5 38
Identification Chemical Pumps
Manual Grease Guns 6 Air Operated Diaphragm Pumps 39
Grease Gun Fittings & Accessories/ Single Point Water Meters 40

7
Lubricators
Chemical Meters 41
Electric Grease Guns 8
Air, Water & Chemical Hose Reels / Hose Reels
Electric Grease Guns Accessories 9 42
Accessories
Grease Pump Layout / Pneumatic Piston Grease Chemical Hand Pumps / Pump Air Supply
10 43
Pumps Accessories / Nozzles
Grease Pump Kits / Grease Pump Covers & ADBLUE 44
11
Follower Plates
Grease Pump Accessories / Grease Meters / Pump Adblue Pump Layout / Adblue Pump Kits 45
12
Air Supply Accessories
Adblue Pump / Adblue Meters 46
Grease Hose Reels / Hose Reel Accessories 13
Adblue Nozzles & Hoses / Adblue Hose Reels 47
OIL 14
ELECTRICAL & CABLE MANAGEMENT 48
Trico Spectrum Oil Containers & Nozzle Lids 15
Electrical Supply Reels / Faicom Curtain Cable
Trico Spectrum Accessories / Industrial Fast 49
16 Reels Gleason Static Discharge Reels
Funnel
Gleason Cable-Master Reels / Gleason Series “S”
Manual Oil Pumps 17 Spring-Driven Electric Cable Reels / Gleason “C” 50
Track Festoon Systems
Electric Oil Pumps 18 Gleason PowerTrak® / Gleason Ergonomic Tool
51
Balance Reels
Air Operated Diaphragm Pumps 19
MITYVAC 52
Oil Pump Layout 20
Cooling System Testing & Diagnostic Equipment 53
Pneumatic Piston Oil Pump Kits 21
Pneumatic Piston Oil Pumps / Oil Pump Engine Diagnostic Equipment 54

22
Accessories Specialty Tools & Equipment / Fluid Evacuation &
56
Oil Control Valves & Meters / Pump Air Supply Dispensing Equipment
23
Accessories
Brake & Clutch Bleeding Equipment 57
Oil Hose Reel / Hose Reel Accessories 24
Hand Vacuum Pumps 59
Desiccant Breathers 25
Accessories 61
WASTE OIL 26
FIRE EXTINGUISHERS 62
Portable / Automatic & Trolley Mounted 63
Waste Oil Pneumatic Piston Pump / Mobile Waste
28
Oil Drains
Extinguisher Servicing 64
FUEL 29
Portable Extinguisher Support & Accessories 65
Diesel Pump Layout / Electric Diesel Pumps 30
QUICK REFERENCE 66
Electric Diesel Pumps Kits 31
Piston & Electric Pumps 67
Electrical Supply Reel 68
Fuel Filters / Fuel Nozzles 33
Diaphragm Pumps 69
Fuel Meters 34
Hose Reels 70
Faicom Hose Reels / Hose Reel Accessories / Hand
36
Fuel Pumps
GREASE
4 JSG Industrial Systems | General Line Catalogue

Grease
GREASE
Grease Nipples
Popular grease nipples supplied in convenient packs of 10. Manufactured from Cad plated
steel.
PART NUMBER HEAD TYPE THREAD SIZE THREAD TYPE ORIENTATION
04-12LA165 Grease Nipple 6mm Metric 90°
04-12L161 Grease Nipple 6mm Metric Straight
04-12LA169 Grease Nipple 8mm Metric 90°
04-12LA204 Grease Nipple 10mm Metric 90° Grease Nipples - Pack of 10

04-12L028 Grease Nipple 1/8” NPT Straight
04-12LA043 Grease Nipple 1/8” NPT 90°
04-12L029 Grease Nipple 1/8” BSP Straight
04-12LA044 Grease Nipple 1/8” BSP 90°
04-12LA060 Grease Nipple 1/4” BSP 90°
04-12L048 Grease Nipple 1/4” BSP Straight
04-12LA059 Grease Nipple 1/4” NPT 90°
04-12L047 Grease Nipple 1/4” NPT Straight
04-12LT046 Button Head 1/8” BSP Straight
04-12LT326 Button Head 1/4” NPT Straight
04-12LT52 Button Head 1/4” BSP Straight
Trico Spectrum Grease Identification

Avoid grease cross contamination and misapplication with spectrum grease nipple
identification caps and grease gun identification bands. Trico grease fitting caps available
in packs of 10.
Trico Grease Fitting Caps
YELLOW GREEN RED BLUE PURPLE ORANGE
07-37024 07-37025 07-37026 07-37027 07-37041 07-37058

Trico Grease Fitting Caps
Trico Grease Gun Bands
YELLOW GREEN RED BLUE PURPLE ORANGE
07-37036 07-37037 07-37038 07-37039 07-37044 07-37056
Trico Grease Gun Bands
Quality Industry Solutions | www.jsgindustrial.com 5

Grease
Grease Guns
Manual Grease Guns.
The choice of mechanics and industrial maintenance professionals everywhere. Lincoln grease guns are designed for rough treatment on
the job.
PART NUMBER CARTRIDGE PRODUCT DESCRIPTION

SIZE
01-G120 400g Lincoln Guardian Single Shot Air Grease Gun Max. 4800 psi delivery pressure
01-001162 400g Lincoln Air Operated Grease Gun Max. 6000 psi delivery pressure, ergonomic handle
01-001132 400g Lincoln Pistol Grip Grease Gun With 127mm whip hose and coupler
01-001133AUS 450g Lincoln Heavy Duty Pistol Grip Grease Gun One hand operation, 18” whip hose and coupler
01-001133 400g
01-001134 400g Lincoln Heavy Duty Pistol Grip Grease Gun Jam proof handle. With coupler, 457mm whip hose and 152mm rigid
extension
01-001142AUS 450g Lincoln Heavy Duty Lever Grease Gun Rigid nozzle, bulk fill or grease cartridge
01-001142 400g
01-001148 400g Lincoln Deluxe Lever Gun With comfort vinyl grip and purging valve. Dual output for either high
pressure or volume
01-001147 400g Lincoln Heavy Duty Lever Grease Gun With 457mm whip hose and coupler
01-001151 600g Bulk Lincoln Bulk Lever Gun Bulk fill 600g barrel with rigid pipe and coupler
Clear Grease Guns and Grease Tubes
01-001100CLR 400g Lincoln Clear Tube Conversion Kit Tube only. For easy conversion from Lincoln 400g steel tubes.
01-001107CLR 400g Lincoln Clear Tube Kit Tube only. For easy conversion of many competitor models.
01-001142CLR 400g Lincoln Lever Gun with Clear Tube Grease gun with high strength clear tube
01-001148CLR 400g Lincoln Deluxe Lever Gun with Clear Tube Grease gun with high strength clear tube
01-001134CLR 400g Lincoln Pistol Gun with Clear Tube Grease gun with high strength clear tube
Lincoln Guardian Single Lincoln Air Operated Lincoln Heavy Duty Pistol Lincoln Heavy Duty Lincoln Pistol Grip Lincoln Heavy Duty
Shot Air Grease Gun Grease Gun Grip Grease Gun Pistol Grip Grease Gun Grease Gun Lever Grease Gun
Lincoln Deluxe Lincoln Heavy Duty Lincoln Bulk Lincoln Clear Lincoln Lever Gun Lincoln Deluxe Lever Lincoln Pistol Gun
Lever Gun Lever Grease Gun Lever Gun Grease Tube with Clear Tube Gun with Clear Tube with Clear Tube

Grease
Grease Gun Fittings & Accessories
High quality grease gun accessories to meet all of your requirements.
PART NUMBER PRODUCT DESCRIPTION

Guardian 18” x 1/8” NPT Hose Extension
01-G212 Guardian 12” x 1/8” NPT Hose Extension Working pressure 3500 psi, burst with Guard
pressure 14000 psi
01-G218 Guardian 18” x 1/8” NPT Hose Extension Working pressure 3500 psi, burst
pressure 14000 psi
01-G218S Guardian 18” x 1/8” NPT Hose Extension Working pressure 3500 psi, burst
with Guard pressure 14000 psi
Guardian Heavy Duty Grease
01-G907 Guardian Grease Filler Nipple 1/8” NPT Bulk fill grease guns Coupler 1/8”
01-G300 Guardian 1/8” Standard Grease Coupler Suitable for most grease guns, 1/8”
NPT, knurled body for ease of handling
01-G310 Guardian Heavy Duty Grease Coupler Knurled body for ease of handling
1/8” NPT
01-001230 Lincoln Flexible Grease Hose 30" Working Pressure 3500psi, burst
pressure 14000 psi
01-001236 Lincoln Flexible Grease Hose 36" Working Pressure 3500psi, burst Lincoln Flexible
pressure 14000 psi Grease Hose 30"
Single Point Lubricators

Ready-to-use straight from the box. Tool-free activation and time-setting allow easy and accurate
adjustment of lubrication flow.
PART NUMBER CARTRIDGE SIZE PRODUCT DESCRIPTION
SKLAGD125/WA2 125g SKF System 24 Single Point Lubricator Gas Driven, 1 to 12 months dispense
rate. Multi-purpose EP type grease
for conveyors, electric motors, pumps
& fans.
SKLAGD125/HP2 125g SKF System 24 Single Point Lubricator Gas Driven, 1 to 12 months dispense
rate. High performance polyurea for
electric motors, pumps & fans.
SKLAGD125/GB2 125g SKF System 24 Single Point Lubricator Gas Driven, 1 to 12 months dispense
rate. Biodegradable, low toxicity for
agriculture, forestry, construction
SKF System 24 Single
& earthmoving equipment, water
Point Lubricator
treatment & irrigation.
Note: for other specification refer to JSG sales personel

Grease
Grease Guns
Lincoln PowerLuber Electric Grease Guns.
PART NUMBER CARTRIDGE PRODUCT DESCRIPTION

SIZE
01-001882E-400 400g Lincoln PowerLuber 20V DC Li-ion Grease Gun, single battery 2 speed PowerLuber with single battery, charger and carry case.
LCD screen monitors grease output and battery level. Fitted with
LED work lamp.
01-001842AUS 450g
Lincoln PowerLuber 18V DC NiCad Grease Gun, single battery With single battery, charger and carry case
01-001842E-400 400g
01-001862AUS 450g Quick recharge with single battery, level gauge,
Lincoln PowerLuber 18V DC Li-ion Grease Gun, single battery Charger and carry case
01-001862E-400 400g
01-001442AUS 450g
Lincoln Powerluber 14V DC NiCad Grease Gun, single battery With single battery, charger and carry case
01-001442E-400 400g
01-G121AUS 450g
Lincoln Guardian 12V DC NiCad Grease Gun, single battery With single battery, charger and carry case
01-G121A400 400g
Lincoln Guardian 12V DC NiCad Grease Gun Lincoln PowerLuber 14V DC NiCad Grease Gun Lincoln 18V DC NiCad Grease Gun
Lincoln PowerLuber Li-ion 18V DC Grease Gun Lincoln PowerLuber Li-ion 20V DC Grease Gun

Grease
Grease Guns
Lincoln Electric Grease Gun Accessories.
01-G915A Lincoln Guardian 12V DC NiCaD Battery Battery to suit 01-G121AUS
01-001210A Lincoln 12V DC NiCaD Charger 230V AC 3 Pin Charger to suit 01- G121(AUS/400)
01-001215 Lincoln 12V DC NiCad Charger 12/24V DC In-Car Charger to suit 01-G121(AUS/400)
01-001401 Lincoln 14.4V NiCaD Battery Suits 01-001442AUS and 01-001442E-400
01-001801 Lincoln 18V NiCaD Battery Suits 01-001842AUS and 01-001842E-400
01-001410A Lincoln 14.4V DC and 18V DC NiCad Charger 230V AC - 11/18V DC 3 Pin Charger to suit 01-001842(AUS/E-400)
01-001815A Lincoln 18V DC NiCad Charger 12/24V DC 3 In - Car Charger to suit 01-001842(AUS/E-400)
01-001861 Lincoln 18V DC Li Ion Battery Li-ion Battery to suit 01-001862(AUS/E-400)
01-001850A Lincoln 18V DC Li Ion 230V AC 230V AC 3 Pin Charger to suit 01-001862(AUS/E-400)
Battery Charger
01-001855A Lincoln 18V Li Ion Charger 12/24V DC in Car charger. Suits 01-001862AUS and 01-001862E-400
01-001871 Lincoln 20V DC Li Ion Battery Li Ion Battery to suit 01-001882(AUS/E-400)
01-001870A Lincoln 20V DC Li Ion 230V AC Battery Charger 230V AC to suit 01-001882(AUS/E-400)
01-001875A Lincoln 20V DC Li Ion Charger 12/24V DC 3 In-Car Charger to suit 01-001882(AUS/E-400)
Lincoln Guardian Lincoln Guardian 12V DC Lincoln Guardian 12V DC Lincoln 14.V4 Lincoln 18V NiCad
12V DC NiCad Battery NiCad 230V AC Charger NiCad Charger - In Car NiCad Battery Battery
Lincoln 14.4V DC & 18V DC Lincoln 18V DC Lincoln 18V DC Lincoln 18V DC Lincoln 18V Li-ion
NiCad 230V AC Charger NiCad Charger - In Car Li Ion Battery 230V AC Li Ion Charger Charger - In Car
Lincoln 20V DC Lincoln 20V DC Li Ion Lincoln 20V DC Li Ion

Li Ion Battery 230V AC Battery Charger Charger - In Car

Grease
Grease Pump Layout

Typical Setup – Grease dispensing setup using Grease Pump in Pail
Grease Pump
Control Valve
Air Filter, Regulator,

Lubricator Swivel
Cover
Hose
Follower Plate
Pneumatic Piston Grease Pumps

The pneumatic GP72 grease pumps with a high compression ratio delivers grease at high pressure both at
short and at long distances. The GPM65 is useful for where increased flows are required.
PART NUMBER DRUM COMPRESSION DELIVERY OUTLET TUBE Ø COVER FOLLOWER

RATIO THREAD PLATE
48-GP7241 12 - 20kg 58:1 1500g/min 1/4” BSP M 30mm 48-C28 48-M27
48-GPM6594 180 - 200kg 65:1 4100g/min 1/2” BSP M 35mm 48-C6135 48-M5935
Grease Pumps

Grease
Grease Pump Kits
Grease dispensing kits are available for portable or fixed solutions. Hose reel pump kits (HR) are designed to be combined with hose reels
up to 15m length.
PART NUMBER PRODUCT DRUM COMPRESSION DELIVERY DESCRIPTION

RATIO
48-KP7247E Grease Pump Trolley Kit 18 - 30kg 58:1 600g/min Pump, lid follower plate, trolley, hose, control valve
48-KP7247P Grease Pump Carry Kit 18 - 30kg 58:1 600g/min Pump, lid follower plate, hose, control valve
48-KP7294HR Grease Pump Wall Kit 180 - 200kg 58:1 600g/min Compatible for hose reel. Hose reel not included*
Grease Pump Trolley Kit Grease Pump Wall Kit Grease Pump Carry Kit
(Reel not included)
Grease Pump Covers & Follower Plates

Follower plates and drum covers to suit various grease drum sizes. These are designed to
assist with pump priming and prevent contamination.
03-FPT45 Follower Plate Suits 20 - 30kg drum, 270 - 290mm, 20 - 35mm shaft
48-M40 Follower Plate Suits AUS 60kg drum, 370 - 400mm, 30mm shaft Follower Plate
48-M59 Follower Plate Suits 180 - 200kg drums, 540 - 580mm, 30mm shaft
48-M5935 Follower Plate Suits 180 - 200kg drums, 540 - 580mm, 35mm shaft
(GPM6594 pump)
48-C32 Drum Cover Suits 20 - 30kg grease drums, 270 - 310mm, 30mm
shaft
48-C42 Drum Cover AUS Suits 50 - 60kg grease drums, 380 - 410mm, 30mm
shaft
48-C61 Drum Cover Suits 180 - 200kg grease drums, 560 - 600mm,
30mm shaft
48-C6135 Drum Cover Suits 180 - 200kg grease drums, 560 - 600mm,
Drum Cover
35mm shaft
Note: *Select from Faicom Hose Reel Section. Recommend up to 15m hose only.

Grease
Grease Pump Accessories

High quality grease accessories to match your grease pumping needs.
48-P14FF Flex Grease Control Valve With 400mm 'fortius' flex hose and 4 jaw
coupler. 1/4” BSP F inlet
48-P14R Rigid Grease Control Valve Rigid pipe nozzle and 4 jaw coupler. 1/4” BSP
F inlet
Faicom Rigid Grease Control Valve 1/4” BSP
48-S14D Grease Swivel Joint 1/4” BSP M/F, suits P14FF and P14R nozzles
48-S14Z Z Swivel 1/4” BSP M/F, suits P14FF and P14R nozzles
48-T1404 Grease Hose 1/4” BSP M/M x 4m, max. 6000 psi
48-T1406 Grease Hose 1/4” BSP M/M x 6m, max. 6000 psi
48-T4GR 4 Jaw Grease Coupler M10 x 1. Suits P14 series control valves
01-000740 Lincoln Grease Gun 1/4” Inlet Rigid pipe nozzle and 4 jaw coupler. 1/4” NPT
F inlet
01-083594 Lincoln 1/4” Universal Swivel Z swivel, 1/4” NPT M x 1/4” NPT M
01-081387 Lincoln 1/2” - 1/4” Swivel Z swivel, 1/2” - 27 x 1/4” NPT M

Lincoln Rigid Grease Control Valve 1/4” NPT
Lincoln 1/4” Universal Swivel
Grease Hose and Coupler
Grease Meters
High accuracy grease meters for high pressure pumping systems.
PART NUMBER PRODUCT ACCURACY FLOW RANGE MAX. CONNECTION

OF READING PRESSURE
15-F0043011A K200 Inline Grease +/- 0.5% 0.1 - 2.5 kg/min 7200 psi 1/8” BSP
Meter
15-F0043100A K200 Greaster Meter +/- 0.5% 0.1 - 2.5 kg/min 7200 psi 1/8” BSP
Control Valve
K200 Inline Meter and K200 Meter Control Valve
Pump Air Supply Accessories

Clean, lubricated air supply to the pump will ensure a long pump life. All assemblies
include gauge.
PART NUMBER PRODUCT THREAD SIZE
48-FRL12 Filter, Regulator and Lubricator 1/2” BSP
48-R14 Regulator 1/4” BSP Air/Filter, Regulator and Lubricator

Grease
Grease Hose Reels*
Engineered with a robust spring canister, Faicom grease reels reliably dispense and retract hose for dispensing applications. A powder
coated finish over a hot galvanised steel structure ensures the longevity of function and aesthetic appearance.
PART NUMBER SERIES MAX. HOSE MAX. HOSE SWIVEL INLET OUTLET MAX. WORKING DESCRIPTION
SIZE LENGTH THREAD THREAD PRESSURE
48-V4G1415 V 1/4” 15m 1/4” BSP F 1/4” BSP M 6000 psi Suitable for grease
48-VL4G1420 VL 1/4” 20m 1/4” BSP F 1/4” BSP M 5600 psi Suitable for grease
48-VL4G3815 VL 3/8” 15m 3/8” BSP F 3/8” BSP F 5600 psi Suitable for grease
V Series VL Series
Hose Reel Accessories

Optional hose reel accessories for professional installation and increased
function.
PART NUMBER PRODUCT DESCRIPTION Faicom 4 Reel Bracket

48-PFA04 Faicom 4 Reel Bracket Suitable for V, VL reels
Note: *Reels include hose.

Oil
OIL

Oil
Trico Spectrum Oil Containers & Nozzle Lids
The Spectrum® oil containers promote a fully integrated visual lubrication management system that improves productivity and efficiency.
The system enables operators to identify lubricants, while ensuring accurate and consistent delivery. The Spectrum oil container lids are
available in 10 colors.
8 LITRE 11 LITRE 15 LITRE
07-34460 07-34461 07-34462
Trico Oil Containers
1” Nozzle Lid
Ideal for topping-off engines, crankcases, and other areas where higher flow is required.
YELLOW RED BLUE GREEN BLACK ORANGE PURPLE GREY TAN DARK
GREEN
07-34420 07-34421 07-34422 07-34423 07-34424 07-34425 07-34426 07-34427 07-34428 07-34429
1” Nozzle Lid
1/2” Nozzle Lid
Ideal for use with oils having viscosities up to ISO 460 or where precise pouring is required.
GREEN
07-34410 07-34411 07-34412 07-34413 07-34414 07-34415 07-34416 07-34417 07-34418 07-34419
1/2” Nozzle Lid
1/4” Nozzle Lid
Ideal for controlled pouring into small reservoirs or filler holes.
GREEN
07-34400 07-34401 07-34402 07-34403 07-34404 07-34405 07-34406 07-34407 07-34408 07-34409
1/4” Nozzle Lid

Oil
Trico Spectrum Accessories

Pump Storage Lid
This multi-purpose lid allows rapid pouring of oils, making it ideal for topping off machinery such
as crankcases or large engine blocks.
GREEN
07-34430 07-34431 07-34432 07-34433 07-34434 07-34435 07-34436 07-34437 07-34438 07-34439 Pump Storage Lid
Identification Tags
Avoid lubricant cross contamination and misapplication with spectrum tags. The spectrum tags
provide a simple and fast solution for identifying lubricants from storage to point of use.
GREEN
07-37077 07-37075 07-37079 07-37078 07-37084 07-37076 07-37080 07-37083 07-37082 07-37081
Trico Spectrum Tag
Hand Pump
Fits directly in to Trico Spectrum lids. Ideal for awkward or hard to reach oil top-off applications
such as gearboxes, lathes, and milling machines. Supplied with outlet hose and anti-drip nozzle.
P/N 07-34463
Hand Pump
Industrial Fast Funnel

Trico’s Industrial Fast Funnels® are the simple, convenient and clean way to
pour fluids into containers and equipment. Intended for one-time use, each
funnel remains clean and compact until separated from the header and
opened. Made of coated, heavy grade paper stock, they can be used with
most lubricants and liquids and are designed to fit a wide variety of orifices
as small as 3/4” in diameter.
PART NUMBER PRODUCT QUANTITY TOTAL NO.

OF FUNNELS
07-36990 Industrial Fast Funnel – Standard 12 x 3 pack 36

Industrial Fast Funnel
07-36991 Industrial Fast Funnel – Large 12 x 3 pack 36

Oil
OIL
Manual Oil Pumps

Ideal for applications requiring portability and economy, manual oil pumps dispense lubricants from most bulk containers.
16-112930 Maspel 20L Hand Oil Pump Light to medium grade oils
16-112965 Maspel 60L Hand Oil Pump 60L drums Light to medium grade oils. Plastic body
16-112965-STEEL Maspel 60L Deluxe Hand Oil Pump 60L drums Light to medium grade oils. Steel body
01-001340 Lincoln Lever Action Barrel Pump 60/205L drums, light to medium oils. 414ml/stroke. Removeable non drip spout
01-001326 Lincoln Diaphragm Action Hand Pump 60/205L drums, light to heavy gear oils. Double acting, 475ml/stroke. With 2.4m hose and nozzle
16-152650 Maspel Low Volume Rotary Pump 60/205L drums, 330ml/revolution
16-152751 Maspel High Volume Rotary Pump 60/205L drums, 1L/revolution
01-001385 Lincoln Rotary Hand Pump 60/205L drums, light to medium oils. Internal check for constant prime
01-001387 Lincoln Rotary Hand Pump with Hose 60/205L drums, light to medium oils. Internal check for constant prime. 2.44m hose with nozzle
20L Hand Oil Pump Maspel 60L Hand Oil Maspel 60L Deluxe Lincoln Lever Action Lincoln Diaphragm
Pump Hand Oil Pump Barrel Pump Action Hand Pump
Low Volume Rotary Pump High Volume Rotary Pump Lincoln Rotary Hand Lincoln Rotary Hand
Pump Pump with Hose

Oil
Electric Oil Pumps

Reliable oil electric pumps suited for dispensing. DC and AC models available with some versions able to handle oils up to 5000 cSt.
Available as pump only or as a kit.
PART NUMBER PRODUCT VOLTAGE DESIGN FLUID FLOW PRESSURE INLET/ DUTY DESCRIPTION
TYPE RATE OUTLET CYCLE
52-142100-03 L5016 Oil Pump 12 VDC Gear Oil up to 200 cSt 15 lpm 1" NPT, 30 min Incl. 3/4" ball valve, suction
3/4" BSP pipe, 2.5m hose
52-118000-9 P-200-BV Oil Pump 12 VDC Gear Oil up to 80 cSt 30 lpm 1" NPT 30 min Incl. 1" ball valve, suction
pipe, 3.7m hose, 4.6m cord
15-F0031002A Viscomat 60/1 Oil 24 VDC Gear Oil up to 2000 cSt 4 lpm 70 psi 1/2” BSP 30 min Pump only
Pump
52-142100-02 L5132 Oil Pump 230 VAC/ Gear Oil up to 200 cSt 30 lpm 1" NPT, 30 min Incl. 3/4" ball valve, suction
50 Hz 3/4" NPT pipe, 2.5m hose
15-F0031001A Viscomat 60/2 24 VDC Gear Oil up to 600 cSt 10 lpm 70 psi 3/4” BSP 30 min Pump only
15-F00303M00 Viscomat 90 M 230 VAC/ Vane Oil up to 500 cSt 50 lpm 1” BSP Continuous Pump only. With bypass
50 Hz valve
15-000303000 Viscomat 90T Pump 415 VAC/ Vane Diesel,Oils up to 25 lpm 1” BSP F Continuous Pump only
three 500 cSt
phase
15-F00268000 Viscomat 60/1 12 VDC Gear Oil up to 2000 cSt 5 lpm 70 psi 30 min Incl. manual nozzle and
Pump Kit 4m hose
15-F00263210 Viscotroll 120/1 12 VDC Gear Oil up to 2000 cSt 6 lpm 70 psi 30 min Incl. 4 wheel trolley, manual
Pump and Trolley Kit nozzle, battery charger,
K400 digital meter
15-F0026303D Viscotroll 200/2 230 VAC/ Gear Oil up to 500 cSt 9 lpm 70 psi Continuous Incl. 4 wheel trolley, manual
Pump and Trolley Kit 50 Hz nozzle, K400 digital meter
Viscomat 60/1 and 60/2 Viscomat 90 M Viscomat 90 T P-200-BV Oil Pump
L5016 Oil Pump
Viscomat Drum Pump Kit Viscotroll 120/1 Viscotroll 200/2 L5132 Oil Pump

Oil
Air Operated Diaphragm Pumps for Oil
All-Flo Diaphragm pumps are designed for pumping oils at high volume. Rugged diaphragm materials combined with a sturdy aluminium
body ensures quality construction and continuous reliability.
PART NUMBER BODY FLUID CON- MAX. FLOW MAX. AIR NOISE DIAPHRAGM VALVE/ VALVE SEAT O-RINGS FLUIDS
MATERIAL NECTIONS RATE PRESSURE LEVELS MATERIAL BALL
51-A050-BAA-GGPN-000 Aluminium 1/2” BSP F 56.8 lpm 8.2 bar 80 Dba (with Geolast Geolast Polypropylene Buna-N Oils
(15 gpm) (120 psi) muffler)
51-A050-BAA-VVAV-000 Aluminium 1/2” BSP F 56.8 lpm 8.2 bar 80 Dba (with Viton Viton Aluminium Viton Oils
51-AB-10-P15 Aluminium 1” BSP 155.8 lpm 8.2 bar 80 Dba (with Geolast Geolast Polypropylene Nitrile Oils
51-A200-BAA-VVYV-000 Aluminium 2” BSP F 719 lpm 8.2 bar 76 Dba (with Viton Viton Nylon Viton Oils
(190 gpm) (120 psi) muffler) 103
Dba (without)
51-AN-30-P15 Aluminium 3” BSP F 965 lpm 8.2 bar 86 Dba (with Nitrile Nitrile Polypropylene Nitrile Oils
Note: For other specifications refer to JSG sales personnel.
1/2” A-Series Diaphragm Pump 1” Aluminium Body Diaphragm Pump
2” A-Series Diaphragm Pump 3” Aluminium Body Diaphragm Pump

Oil
Oil Pump Layout

Typical Setup – Oil dispensing using Oil Pump in IBC
Pickup Tube
Oil Stub Pump with

Wall Mount
Hose
Control Valve
Typical Setup – Oil dispensing using Oil Pump in Barrel
Meter
Hose
Oil Pump with Extension

Oil
Pneumatic Piston Oil Pump Kits
These kits are suitable for the transfer of oil for use with tanks and 205L drums. Hose reel pump kits (HR) are designed to be combined
with hose reels up to 15m length.
PART NUMBER PRODUCT DRUM RATIO DELIVERY* DESCRIPTION
48-KP41M110 Oil Pump Wall Mount Kit 205L 4:1 21L/min Hose and tank pick up
48-KPL41M110 High Flow Oil Pump Wall Mount Kit 205L 4:1 26L/min Hose and tank pick up
48-KP61M110 Oil Pump Wall Mount Kit 205L 6:1 15L/min Hose and tank pick up, high viscosity oil, long distance
48-KP61M110HR Oil Pump Wall Mount Kit 205L 6:1 15L/min Compatible for hose reel. Hose reel not included**
48-KP4194SC Oil Pump Kit 205L 4:1 10L/min Pump, hose, digital meter and valve
48-KP41OILSPI Oil Pump IBC Kit 1000L 4:1 10L/min Pump, regulator, suction tube, pump support, drip tray,
5m Hose (No control valve)
48-KP41OILSPIAV Oil Pump IBC Kit 1000L 4:1 10L/min Pump, regulator, suction tube, pump support, drip tray,
hose reel support (No control valve, hose reel & hose)
High Flow Oil Pump Wall Mount Kit Oil Pump Kit with Meter
Oil Pump Hose Reel**, IBC Kit*** Wall Mount Hose Reel Kit**
Note: *Free flow delivery. **Refer to Faicom Hose Reel section. Recommend up to 15m only. ***Refer to Oil Control Valve and Meters section

Oil
Pneumatic Piston Oil Pumps

Faicom oil pumps are available in stub and 205L drum versions. Designed with a double
action pumping system to ensure constant delivery of oil.
A unique pneumatic double-cylinder motor results in powerful and compact size.
Materials have been selected to guarantee high reliability and resistance to wear and all
pumps include a bung bush.
PART NUMBER PRODUCT RATIO DELIVERY* INLET OUTLET TUBE Ø DESCRIPTION Stub Pump
THREAD THREAD
48-DP4117 Oil Stub Pump 4:1 21L/min 1” BSP F 1” BSP F 50mm High flow
48-DP6117 Oil Stub Pump 6:1 15L/min 1” BSP F 1/2” BSP F 42mm High viscosity oil,
long distance
48-DPL6122 Oil Stub Pump 6:1 18L/min 1” BSP F 1/2” BSP M 42mm High viscosity oil,
long distance
48-DPL612294 205L Oil Pump 6:1 18L/min N/A 1/2” BSP M 42mm High viscosity oil, 205L Pump
long distance
Oil Pump Accessories

High quality accessories from JSG Industrial Systems ensure reliability in all oil systems.
48-MRG10-1 Faicom Nozzle Drip Tray Powder coated finish
48-P0173 Faicom Suction Pipe, 1” BSP F Suits 50 - 60kg drums, D4117 and DP6117
stub pumps, 555mm long
48-P0194 Faicom Suction Pipe 1” with Filter Suits 180 - 200kg drums, DP4117 and
DP6117 stub pumps, 765mm long
48-SG02 Faicom Pump Wall Mount Bracket Includes 2” BSP plastic lock ring, suits
DP41, DP61, DPL41, DPL61, DP41NK stub
pumps
48-T1205 Faicom Oil Hose 1/2” x 5m, M/F BSP ends, max. 700 psi Pump wall mount Bracket
Nozzle Drip Tray Suction pipe Faicom Oil Hose

Oil
Oil Control Valves & Meters
Oil control valves with ergonomic handles for user comfort with extensive use. Combine with reliable and user friendly meters for
accurate dispensing.
PART NUMBER PRODUCT FLOW ACCURACY PRESSURE SPOUT SWIVEL NOZZLE TYPE DESCRIPTION
RANGE
48-P12FS Faicom oil control valve 30 lpm N/A 1000 psi Flex 1/2” BSP F Automatic Manual Control valve only
Swivel non drip
48-P12CFS Faicom oil control valve 30 lpm +/-0.5% 1000 psi Flex 1/2” BSP F Automatic Manual Control valve and meter
with digital meter Swivel non drip
52-120000-28 GPI LM-300 7.5 - 76 lpm +/-2% 50 N/A 1” NPT N/A Meter only
Easyoil Control Valve Control Valve with Digital Meter LM-300

include gauge.
48-R14 Regulator 1/4” BSP

Air/Filter, Regulator and Lubricator

Oil
Oil Hose Reel*

Engineered with a robust spring canister, Faicom oil reels reliably dispense and retract hose for dispensing applications. A powder coat
finish over a hot galvanised steel structure ensures the longevity of function and aesthetic appearance.
48-MC601210 MC 1/2” 10m 1/2” BSP M 1/2” BSP M 840 psi Suitable for oil
48-V601215 V 1/2” 15m 1/2” BSP M 1/2” BSP M 840 psi Suitable for oil
48-BG181325 BG 1/2” 25m 1/2” BSP F 1/2” BSP M 840 psi Suitable for oil
48-VGL603415 VGL 3/4” 15m 1” BSP M 3/4” BSP F 840 psi Suitable for oil
48-VGM600115 VGM 1” 15m 1” BSP F 1” BSP M 840 psi Suitable for oil
BG Series
MC Series V Series
VGL Series VGM Series

function.
PART NUMBER PRODUCT DESCRIPTION Faicom 4 Reel Bracket

48-MCSG10 Faicom Swivel Mount Suitable for MC hose reel
48-PFA04 Faicom 4 Reel Bracket Suitable for MC A, AL, V, VL, VGL reels
Faicom Swivel Mount

Oil
Desiccant Breathers
Watchdog Desiccant Breathers are a unique particle filtration and water removal system. They prevent destructive contaminants from
entering industrial equipment as air is breathed in and out due to thermal expansion or fluid level changes. They feature visual indication
of the silica for replacement, which turns from orange to dark green.
By allowing only clean, dry air into industrial equipment, the Watchdog Desiccant Breathers prolong fluid life, reduce abrasive wear,
downtime, and repair costs.
Modular Design Allows for Customization

Guardian is a new desiccant type breather and revolutionary by design.
Rather than a one-size-fits-all, the Guardian has a modular platform that
allows industry to configure the necessary breather for nearly any application
and life expectancy.
Because of the modular design feature, the Guardian has an optional Stack
Ring, which allows multiple cartridges to be stacked atop each other for
longer breather life and higher moisture removal capabilities. It also means
less servicing and maintenance costs.
07-39170 07-39173 07-39176

Applications:
Desiccant Filters shown are fitted with optional
Fuel Tanks Compound Indicator Gauge
Hydraulic Systems
Gearboxes
Wind Turbines
Mobile Service Vechicles
MODEL HEIGHT DIAMETER FEMALE SILICA MAX. MAX. MAX. ISOLATION COMPOUND CARTRIDGE
NO. MOUNTING GEL ADSORPTION AIR RESERVOIR CHECK INDICATING
CONNECTION CAPACITY FLOW FLUID FLOW VALVE GAUGE
07-39170 9” 5.125” 1” NPT 1.5 Ibs 0.68kg 9.2 fl oz 272ml 25 CFM 187 GPM Yes No 07-39179
07-39171 9” 5.125” 2” NPT 1.5 Ibs 0.68kg 9.2 fl oz 272ml 25 CFM 187 GPM Yes No 07-39179
07-39172 9” 5.125” 1” BSP 1.5 Ibs 0.68kg 9.2 fl oz 272ml 25 CFM 187 GPM Yes No 07-39179
07-39173 12” 5.125” 1” NPT 2.8 Ibs 1.27kg 17.2 fl oz 508.7ml 25 CFM 187 GPM Yes No 07-39180
07-39174 12” 5.125” 2” NPT 2.8 Ibs 1.27kg 17.2 fl oz 508.7ml 25 CFM 187 GPM Yes No 07-39180
07-39175 12” 5.125” 1” BSP 2.8 Ibs 1.27kg 17.2 fl oz 508.7ml 25 CFM 187 GPM Yes No 07-39180
07-39176 16” 5.125” 1” NPT 4.5 Ibs 2kg 27.6 fl oz 816ml 25 CFM 187 GPM Yes No 07-39181
07-39177 16” 5.125” 2” NPT 4.5 Ibs 2kg 27.6 fl oz 816ml 25 CFM 187 GPM Yes No 07-39181
07-39178 16” 5.125” 1” BSP 4.5 Ibs 2kg 27.6 fl oz 816ml 25 CFM 187 GPM Yes No 07-39181
07-39179 5” 5” N/A 1.5 Ibs 0.68kg 9.2 fl oz 272ml N/A N/A Yes N/A N/A
07-39180 8” 5” N/A 2.8 Ibs 1.27kg 17.2 fl oz 508.7ml N/A N/A Yes N/A N/A
07-39181 12” 5” N/A 4.5 Ibs 2kg 27.6 fl oz 816ml N/A N/A Yes N/A N/A

WASTE OIL

Waste Oil
WASTE OIL
Air Operated Diaphragm Pumps for Waste Oil

All-Flo Diaphragm pumps are designed for pumping waste oils at high volume. Rugged diaphragm materials combined with a sturdy
aluminium body ensures quality construction and continuous reliability.
51-A050-BAA-GGPN-000 Aluminium 1/2” BSP F 56.8 lpm 8.2 bar 80 Dba (with Geolast Geolast Polypropylene Buna-N Waste
(15 gpm) (120 psi) muffler) Oil
51-A050-BAA-VVAV-000 Aluminium 1/2” BSP F 56.8 lpm 8.2 bar 80 Dba (with Viton Viton Aluminium Viton Waste
51-AB-10-P15 Aluminium 1” BSP 155.8 lpm 8.2 bar 80 Dba (with Geolast Geolast Polypropylene Nitrile Waste
51-A200-BAA-VVYV-000 Aluminium 2” BSP F 719 lpm 8.2 bar 76 Dba (with Viton Viton Nylon Viton Waste
(190 gpm) (120 psi) muffler) 103 Oil
Dba (without)
51-AN-30-P15 Aluminium 3” BSP F 965 lpm 8.2 bar 86 Dba (with Nitrile Nitrile Polypropylene Nitrile Waste

Waste Oil
Waste Oil Pneumatic Piston Pump

Faicom waste oil pumps is available in stub with extension tube that can be modified to suit any tank depth to be used primarily for the
bulk transfer of waste oil. Designed with a double action pumping system to ensure constant delivery of oil. A unique pneumatic double-
cylinder motor results in powerful and compact size. Materials have been selected to guarantee high reliability and resistance to wear
and all pumps include a bung bush.
ITEM PRODUCT POWER DESIGN FLOW INLET/ DESCRIPTION

TYPE RATE OUTLET
48-DP411794NK Faicom 4:1 Waste Oil Pump Air Piston 22 lpm 1/2” BSP Antifreeze, waste oil and other anti corrosion
fluids. Not to be used with water solutions,
brake fluids and flammable products.
Mobile Waste Oil Drains

Mobile suction units are suitable for gravity draining of engine, gearbox and differential oil
or draining oil from engines through the dip stick hole by pneumatic suction. Kits include 4
wheel trolley, probes, inflating valve and safety valve.
PART NUMBER PRODUCT DRUM DESCRIPTION
48-ZR65 Waste Oil Drain Unit 65L Telescopic steel drain bowl rotatable 360°
48-ZR90 Waste Oil Drain Unit 90L Telescopic steel drain bowl rotatable 360°
48-ZRA65PAN Waste Oil Drain Unit 65L Includes probes for extraction through vehicle dip
stick. Adjustable tray.
48-ZRA90PAN Waste Oil Drain Unit 90L Includes probes for extraction through vehicle dip
stick. Adjustable tray.
48-ZRAV90PAN Waste Oil Drain Unit 90L Includes probes for extraction through vehicle dip
stick. Adjustable tray and oil discharge viewer.
Waste Oil Drain Units
ZR Waste oil with pan up/down

FUEL

Fuel
FUEL
Diesel Pump Layout

Typical Setup – Diesel dispensing using Electric Pump
Diesel Nozzle
Diesel Pump with

Extension
Hose
Electric Diesel Pumps
PART NUMBER PRODUCT VOLTAGE DESIGN FLUID FLOW RATE INLET/ DUTY CYCLE
TYPE OUTLET
15-000303000 Piusi Viscomat 90T Pump 415 VAC/three phase Vane Diesel Oils up to 500cSt 25 lpm 1" BSP F Continuous
15-000312000 Piusi E120 High Flow Diesel Pump 415 VAC/three phase Vane Diesel 100 lpm 1" BSP F Continuous
15-000326000 Piusi E120 High Flow Diesel Pump 230 VAC/single phase Vane Diesel 100 lpm 1" BSP F Continuous
15-F0036302A Piusi Bipump 12 VDC with 4m cable Vane Diesel 85 lpm 1 1/2" BSP F 30 min
15-F0036304A Piusi Bipump 24 VDC with 4m cable Vane Diesel 86 lpm 1 1/2" BSP F 30 min
15-F0034100C Piusi Panther DC Pump Only 12/24 VDC Gear Diesel 35 or 70 lpm 1" BSP 30 min
(volt
dependant)
Viscomat 90 T E 120 Bipump Panther DC

Fuel
Electric Diesel Pumps Kits*
GPI and Piusi Diesel kits are complete with power supply cable (12/24 VDC), delivery hose, nozzle and tank pick up tube to suit 205L
drums and bulk tanks.
PART PRODUCT NOZZLE VOLTAGE DESIGN TYPE FLOW RATE POWER HOSE DESCRIPTION
NUMBER CORD
52-110000-99 GPI M-150S-ML Manual 12 VDC Aluminum Gear 57 lpm 5.5m 3/4” x 3.7m Overload Protected Motor
52-110000- GPI M-150S-AU Automatic 12 VDC Aluminum Gear 57 lpm 5.5m 3/4” x 3.7m Overload Protected Motor
100
52-133240-1 GPI M3025-ML Manual 12 VDC Electric Vane 95 lpm 4.6m 1” x 3.7m Motor is UL Listed to U.S. and
Canadian safety standards.
52-133240-2 GPI M3025-ML Automatic 12 VDC Electric Vane 95 lpm 4.6m 1” x 3.7m Motor is UL Listed to U.S. and
52-133260-01 GPI M3425-ML Manual 24 VDC Electric Vane 95 lpm 4.6m 1” x 3.7m Motor is UL Listed to U.S. and
52-133260-02 GPI M3425-AD Automatic 24 VDC Electric Vane 95 lpm 4.6m 1” x 3.7m Motor is UL Listed to U.S. and
52-133210-01 GPI M-3260-ML Manual 230 VAC Heavy Duty Vane 64 lpm @ 50 Hz None 1” x 3.7m Motor is UL Listed to U.S. and
15-00021800B Piusi 205L Drum Manual 12 VDC Electric Vane 50 lpm 2m 4m Duty cycle 30 min on/off
Pump Kit
15-00021900B Piusi 205L Drum Manual 24 VDC Electric Vane 50 lpm 2m 4m Duty cycle 30 min on/off
Pump Kit
15-000271P00 Piusi 205L Drum Pump Manual 230 VAC/ Electric Vane 56 lpm 1.75m 4m Continuous duty cycle
Kit - Panther 56 single
phase
15-000272P00 Piusi 205L Drum Pump Manual 230 VAC/ Electric Vane 56 lpm 1.75m 4m Continuous duty cycle
Kit - Panther 56 with single
K33 Meter phase
M150S shown with Manual Nozzle M3425 and M3025 shown with Auto Nozzle M3260 shown with Manual Nozzle
205L Drum Pump Kit 205L Drum Pump Kit with Meter
Note: *Electric pumps suitable for diesel and Kerosene. U.L approval only for pumping Gasoline in U.S.A.

Fuel
Air Operated Diaphragm Pumps for Diesel
51-A050-BAA-GGPN-000 Aluminium 1/2” BSP F 56.8 lpm 8.2 bar 80 Dba (with Geolast Geolast Polypropylene Buna-N Diesel
51-A050-BAA-VVAV-000 Aluminium 1/2” BSP F 56.8 lpm 8.2 bar 80 Dba (with Viton Viton Aluminium Viton Diesel
51-AB-10-P15 Aluminium 1” BSP 155.8 lpm 8.2 bar 80 Dba (with Geolast Geolast Polypropylene Nitrile Diesel
51-A200-BAA-VVYV-000 Aluminium 2” BSP F 719 lpm 8.2 bar 76 Dba (with Viton Viton Nylon Viton Diesel
(190 gpm) (120 psi) muffler) 103
Dba (without)
51-AN-30-P15 Aluminium 3” BSP F 965 lpm 8.2 bar 86 Dba (with Nitrile Nitrile Polypropylene Nitrile Diesel

Fuel
Fuel Filters
Filter kit add on and Replacement filter cartridges for GPI Diesel dispensing and metering.
52-111010-1 GPI Filter Element Replacement filter element for FM-100 series meters
52-133527-01 GPI Fuel Filter Kit Includes 3/4” NPT cast iron adapter, 10 micron filter
and 3/4” x 4” nipple
52-133537-01 GPI Fuel Filter Kit Includes 1” NPT, 30 micron particulate filter, adapter,
2 pipe nipples and 2 elbow fittings
GPI Fuel Filter Kit – 52-133537-01
Fuel Nozzles
Automatic and manual nozzles for Diesel handling. Options for leaded and unleaded also available.
PART NUMBER PRODUCT TYPE CONNECTION SWIVEL FLUID FLOW RATE
15-F00602020 Piusi A60 Fuel Nozzle Auto 1” BSP F Yes Diesel and unleaded 60 lpm
15-F00603060 Piusi A60 Fuel Nozzle Auto 1” BSP F Yes Diesel and leaded 60 lpm
15-F00604030 Piusi A80 Fuel Nozzle Auto 1” BSP F Yes Diesel and leaded 90 lpm
15-F00610020 Piusi A120 Fuel Nozzle Auto 1” BSP F Yes Diesel 120 lpm
15-F00641130 Piusi S2000 Fuel Nozzle Manual 1” BSP F Yes Diesel, oil and leaded 120 lpm
52-110121-8 GPI Fuel Nozzle Auto 3/4" NPT F No Diesel, unleaded and kerosene 60 lpm
52-110376-01 GPI Fuel Nozzle Auto 1" NPT F No Diesel 76 lpm
52-906005-1 GPI Fuel Nozzle Auto 1" NPT F No Diesel, unleaded and kerosene 114 lpm
52-110155-1 GPI Fuel Nozzle Manual 3/4" NPT F Yes Diesel, unleaded and kerosene 69 lpm
52-110155-4 GPI Fuel Nozzle Manual 1" NPT F Yes Diesel, unleaded and kerosene 69 lpm
Piusi A60 Fuel Nozzle Piusi A80 Fuel Nozzle Piusi A120 Diesel Nozzle Piusi S2000 Fuel Nozzle
GPI Auto 3/4" Fuel Nozzle GPI Auto 1" Diesel Nozzle GPI Auto 1" Fuel Nozzle GPI Man. Fuel Nozzle

Fuel
Fuel Meters
GPI fuel meters provide a economical solution for tracking fuel inventory and fuel dispensing. Available in electronic and mechanical
versions, GPI meters provide accurate and repeatable measurements.
PART NUMBER SERIES PRODUCT DESIGN FLOW RANGE ACCURACY INLET/ DESCRIPTION
TYPE OF READING OUTLET SIZE
52-111200-19 FM-100 GPI FM-100-L6N Fuel Mechanical 15 - 76 lpm +/- 2% 3/4” NPT Suitable for gasoline, E10, diesel.
Meter Calibrated for litres. Built in filter
52-111200-22 FM-100 GPI FM-100-L6N Fuel Mechanical 15 - 76 lpm +/- 2% 3/4" BSPP F Suitable for gasoline, E10, diesel.
52-111200-21 FM-200 GPI FM-200-L6N Fuel Mechanical 15 - 76 lpm +/- 2% 3/4” NPT Suitable for gasoline, E10, diesel.
Meter Calibrated for litres
52-111200-23 FM-200 GPI FRM-200-L6N Fuel Mechanical 15 - 76 lpm +/- 2% 3/4" BSPP F Suitable for gasoline, E10, diesel.
52-126300-02 MR 5-30 GPI MR 5-30-L6N Fuel Mechanical 19 - 114 lpm +/- 2% 3/4” NPT Suitable for gasoline, E10, diesel.
Meter Calibrated for litres. Changeable flow
direction
52-126300-07 MR 5-30 GPI MR 5-30-L6N Fuel Mechanical 19 - 114 lpm +/- 2% 3/4" BSPP F Suitable for gasoline, E10, diesel.
Meter Calibrated for litres. Changeable flow
direction
52-111200-10 FM-100 GPI FM-100-L6N Fuel Mechanical 15 - 76 lpm +/- 2% 1” NPT Suitable for gasoline, E10, diesel.
52-111200-12 FM-100 GPI FM-100-L6N Fuel Mechanical 15 - 76 lpm +/- 2% 1" BSPP F Suitable for gasoline, E10, diesel.
52-111200-13 FM-200 GPI FM-200-L6N Fuel Mechanical 15 - 76 lpm +/- 2% 1” NPT Suitable for gasoline, E10, diesel.
52-111200-15 FM-200 GPI FM-200-L6N Fuel Mechanical 15 - 76 lpm +/- 2% 1" BSPP F Suitable for gasoline, E10, diesel.
52-113255-2 01 GPI 01A31LM Fuel Meter Electronic 10 - 100 lpm +/-5% 1” NPT Suitable for gasoline, E10, diesel.
Turbine Calibrated for litres. Powered by two
AAA batteries, field replaceable
52-113255-12 01 GPI 01A31LM Fuel Meter Electronic 10 - 100 lpm +/-5% 1" BSPP F Suitable for gasoline, E10, diesel.
52-113900-9501 03 GPI 03A31GM Fuel Meter Electronic 11 - 100 lpm +/-1.5% 1” NPT Suitable for gasoline, E10, diesel.
52-113900-9502 03 GPI 03A32GM Fuel Meter Electronic 114 - 1135 lpm +/-1.5% 2” NPT Suitable for gasoline, E10, diesel.
15-F00484000 K Piusi K400 Fuel Meter Oval Gear - 1 - 30 lpm +/-0.5% 1/2" BSP F Suitable for Diesel, AdBlue and oil up
Electronic to 2000cSt.
15-F00496A00 K Piusi K600/3 Fuel Meter Oval Gear _ 10 - 100 lpm +/-0.5% 1" BSP F Suitable for Diesel and Anti Freeze
Electronic
15-000550000 K Piusi K33 Fuel Meter Mechanical 20 - 120 lpm +/-1% 1" BSP F Suitable for Diesel
Nutating
Disk

Fuel
Fuel Meters
GPI FM-100 Fuel Meter GPI FM-200 Fuel Meter GPI MR 5-30 Fuel Meter
GPI 01A31LM Fuel Meter GPI 03A31GM Fuel Meter GPI 03A32GM Fuel Meter
Piusi K33 Fuel Meter Piusi K400 Fuel Meter Piusi K600/3 Fuel Meter

Fuel
Faicom Hose Reels*

Engineered with a robust spring canister, Faicom fuel reels reliably dispense and retract hose for dispensing applications. A powder
coated finish over a hot galvanised steel structure ensures the longevity of function and aesthetic appearance.
PART NUMBER SERIES MAX. HOSE MAX. HOSE SWIVEL INLET OUTLET THREAD MAX. WORKING DESCRIPTION
SIZE LENGTH THREAD PRESSURE
48-V181315 V 1/2” 15m 1/2” BSP M 1/2” BSP M 250 psi Suitable for diesel
48-VG603408 VG 3/4” 8m 1” BSP M 3/4” BSP M 840 psi Suitable for diesel
48-VGL102510GO VGL 1” 10m 1” BSP F 1” BSP M 120 psi Suitable for diesel
48-BGL102525GO BGL 1” 25m 19mm HOSE BARB 1” BSP M 140 psi Suitable for diesel
V Series VG Series VGL Series BGL Series

Optional hose reel accessories for professional installation and increased function.

Faicom 4 Reel Bracket
48-PFA04 Faicom 4 Reel Bracket Suitable for VGL reels
Hand Fuel Pumps
16-112930 Maspel Hand Plunger Pump 20L drums. Suits diesel and gasoline.
16-112965 Maspel Hand Plunger Pump 60L drums. Suits diesel and gasoline.
52-129003-1 GPI RP-5 Hand Rotary Pump 205L drums. Suits diesel, gasoline, light weight and hydraulic oils.
U.L Listed. 30L/90 revolution.
52-114000-10 GPI HP-100-NUL High Flow Hand Adjustable 60 - 205L drums. Suits diesel, gasoline, medium weight
Diaphragm pump and hydraulic oils. U.L Listed. 1.9L/stroke.
GPI 205L – 60L High
16-152650 Maspel Rotary Pump 60 -205L drums. 330ml/rev Flow Hand Pump
16-152751 Maspel High Flow Rotary Pump 60 -205L drums. 1L/rev
Maspel 60L GPI 205L Rotary Maspel 20L Maspel High Flow Maspel Rotary
Hand Pump Hand Pump Hand Pump Rotary Pump Pump

WATER & CHEMICAL

Water & Chem
WATER & CHEMICALS
Water & Chemical Pump Layout

Typical Setup – Chemical dispensing using Chemical Pump in IBC
Pickup Tube
Chemical Pump with

Wall Mount
Hose
Water & Chemical Pumps

Water and chemical pump kits are complete with power supply cable (12/24 VDC), delivery hose, nozzle and tank pick up tube.
PART NUMBER PRODUCT POWER DESIGN FLOW INLET/ DUTY DESCRIPTION

TYPE RATE OUTLET CYCLE
52-118000-1 GPI P-120H-2UR Chemical Pump 12 VDC Gear 45 lpm 1” 30 min Thin Chemicals 0 - 5 cSt,, not to be used with fuels
or mirco-encapsulated chemicals.
52-118000-2 GPI P-200H-2UR Chemical Pump 12 VDC Gear 30 lpm 1” 30 min Medium/Thick Chemicals 10 - 160 cSt, not ot be
used with fuels or mirco-encapsulated chemicals.
48-DP2101 Faicom 2:1 Multifluid Pump Air Piston 50 lpm 20mm N/A Water solutions, low viscosity oil, Adblue,
antifreeze, windshield fluid and water based
detergents. Not to be used with solvents,
flammable liquids or highly aggressive/corrosive
liquids. For Stainless steel 1.1m extension tube use
48-PX01127 includes one way valve and filter.
48-DP411794NK Faicom 4:1 Antifreeze Pump Air Piston 22 lpm 1/2” BSP N/A Antifreeze, waste oil and other anti corrosion
fluids. Not to be used with water solutions, brake
fluids and flammable products.
GPI 12 VDC Chemical Pump Faicom 4:1 Multifluid Pump Faicom 4:1 Antifreeze Pump

Water & Chem
Air Operated Diaphragm Pumps for Chemical Solutions
All-Flo Diaphragm pumps are designed for pumping water based chemical solutions at high volume. Rugged diaphragm materials
combined with a sturdy aluminium body ensures quality construction and continuous reliability.
51-PB-05 Polypropylene 1/2” NPT/ 64.6 lpm 8.2 bar 83 Dba (with Geolast Geolast Polypropylene Nitrile Chemical,
BSP (17 gpm) (120 psi) muffler) Glycol & Water
51-NC-10-P15 Polypropylene 1” BSP 155.8 lpm 8.2 bar 80 Dba (with Geolast Geolast Polypropylene Nitrile Chemical,
(41 gpm) (120 psi) muffler) Glycol & Water
51-PB-10 Polypropylene 1” ANSI/ 155.8 lpm 8.2 bar 80 Dba (with Geolast Geolast Polypropylene Nitrile Chemical,
DIN Flange (41 gpm) (120 psi) muffler) Glycol & Water
51-BK-10V-P15 Polypropylene 1” BSP 152 lpm 6.8 bar 80 Dba (with Viton Viton Polypropylene Viton Chemical,
(41 gpm) (100 psi) muffler) Glycol & Water
1/2” Polypropylene, Model PB 1” Polypropylene, Model PB

Water & Chem
Water Meters
GPI Water meters provide an economical solution for tracking water dispensing. Available in electronic and mechanical versions, GPI
meters provide accurate and repeatable measurements.
PART NUMBER PRODUCT DESIGN FLOW ACCURACY INLET, POWER FLUID DESCRIPTION
TYPE RANGE OF READING OUTLET SIZE
52-113255-5 Economy GPI Electronic 10 - 100 lpm +/-1% 1” ISO 2 x AAA Water Water only. Ideal for monitoring
01N12LM Water Turbine Batteries and indication. Ceramic bearings,
Meter tungsten carbide shaft, nylon
rotors, ferrite signal generators.
52-113255-6 Economy GPI Electronic 10 - 100 lpm +/-1% 1” NPT 2 x AAA Water Water only. Ideal for monitoring
01N12LM Water Turbine Batteries and indication. Ceramic bearings,
Meter tungsten carbide shaft, nylon
rotors, ferrite signal generators.
52-TM300-F PVC Flow Meter Electronic 151 - 514 lpm +/-3% 3” ANSI - 150 2 x AAA Water Ideal for monitoring and indication.
Turbine Flanges Batteries Stainless steel shaft and thrust
washers, acetal rotors and nose
cone, ferrite signal generator, ANSI
- 150 flange connections
52-TM100 PVC Flow Meter Electronic 19 - 190 lpm +/-3% 1” Schedule 2 x AAA Water Ideal for monitoring and indication.
Turbine 80 Spigot Batteries Tungsten carbide shaft, PVDF rotor
and 316 stainless steel rings
52-TM400-F PVC Flow Meter Electronic 227 - 271 lpm +/-3% 4” ANSI - 150 2 x AAA Water Ideal for monitoring and indication.
Turbine Flanges Batteries Stainless steel shaft and thrust
washers, acetal rotors and nose
cone, ferrite signal generator, ANSI
- 150 flange connections
52-TM050 PVC Flow Meter Electronic 3.8 - 38 lpm +/-3% 1/2” Schedule 2 x AAA Water Ideal for monitoring and indication.
52-TM150 PVC Flow Meter Electronic 38 - 380 lpm +/-3% 11/2” 2 x AAA Water Ideal for monitoring and indication.
Turbine Schedule 80 Batteries Tungsten carbide shaft, PVDF rotor
Spigot and 316 stainless steel rings
52-TM200 PVC Flow Meter Electronic 76 - 760 lpm +/-3% 2” Schedule 2 x AAA Water Ideal for monitoring and indication.
Economy 01 Series Water Meter PVC Flow Meter TM Series with 1/2” Spigot Connection PVC Flow Meter TM Series with 2” Spigot Connection
PVC Flow Meter TM Series with 4” RF Flange

Water & Chem
Chemical Meters
Available in electronic and mechanical versions, GPI chemical meters provide accurate and repeatable measurements. Compatible
with mild chemical solutions as well as water.
PART NUMBER PRODUCT DESIGN FLOW ACCURACY INLET, POWER FLUID DESCRIPTION
TYPE RANGE OF READING OUTLET SIZE
52-111200-17 GPI FM-100 Mechanical 12 - 75 +/-1% 1” BSP P N/A Water, Suitable with most herbicides and
Series Chemical lpm compatible other chemicals compatible with
Meter (FM-100H- chemicals. meter materials. Do not use with
L8B) water.
52-A109LMA025IA1 GPI A1 Series Paddle 1 - 11 +/-1% 1” BSP 2 x AAA Water, Ceramic bearings, tungsten carbide
Aluminium Low Wheel lpm Batteries compatible shaft, nylon rotors, ferrite signal
Flow Meter chemicals. generators.
52-A109LMA100IA1 GPI A1 Series Electronic 11 - 190 +/-1% 1” BSP 2 x AAA Water, Ceramic bearings, tungsten carbide
Aluminium Flow Turbine lpm Batteries compatible shaft, nylon rotors, ferrite signal
Meter chemicals. generators.
52-A109LMA200IA2 GPI A1 Series Electronic 114 - +/-1% 1” BSP 2 x AAA Water, Ceramic bearings, tungsten carbide
Aluminium Flow Turbine 1135 lpm Batteries compatible shaft, nylon rotors, ferrite signal
Meter chemicals. generators.
52-A109LMN100IA1 GPI A1 Series Electronic 11 - 190 +/-3% 1” BSP 2 x AAA Water, Ceramic bearings, tungsten carbide
Nylon Flow Meter Turbine lpm Batteries compatible shaft, nylon rotors, ferrite signal
chemicals. generators.
52-120000-2 GPI FM-300 Electronic 7 - 76 +/-1% 1” NPT 1 x 9V Water, Suitable with water, most
Series Chemical Turbine lpm Battery herbicides, herbicides, fertiliser and oils. Do
and Water Meter fertiliser, not use with fuels and flammables.
(FM-300H-L8N) oils
FM-100 Series Mechanical Chemical Meter FM-300 Series Chemical Meter A1 Series High Flow Nylon Chemical Meter
A1 Series High Flow Aluminium Chemical Meter

Water & Chem
Air, Water & Chemical Hose Reels*

Engineered with a robust spring canister, Faicom Water and Chemical reels reliably dispense and retract hose for dispensing
applications. A powder coat finish over a hot galvanised steel structure ensures the longevity of function and aesthetic.
48-MC180815 MC 3/8” 15m 3/8” BSP F 3/8” BSP M 250 psi Suitable for air and water
48-MC601210 MC 1/2” 10m 1/2” BSP M 1/2” BSP M 840 psi Suitable for air and water
48-V181315 V 1/2” 15m 1/2” BSP M 1/2” BSP M 250 psi Suitable for air and water
48-VL601220 VL 1/2” 20m 1/2” BSP M 1/2” BSP M 840 psi Suitable for air and water
48-BG181325 BG 1/2” 25m 1/2” BSP F 1/2” BSP M 840 psi Suitable for air and water
48-BG600115 BG 1” 15m 1” BSP F 1” BSP F 840 psi Suitable for air and water
48-VX4H3815 VX 3/8” 15m 3/8” BSP F 3/8” BSP M 5600 psi @ 150°C Suitable for water, high
pressure hot wash.
48-VL4H3820 VL 3/8” 20m 3/8” BSP F 3/8” BSP M 5600 psi @ 150°C Suitable for water, high
pressure hot wash.
48-VGLX101915K VGLX 3/4” 15m 19mm HOSE 3/4” BSP F 140 psi @ 150°C Suitable for water, high flow,
BARB high temperature wash.
V Series VX Series VGLX Series
MC Series VL Series BG Series
Hose Reels Accessories

function.
48-MCSG10 Faicom Swivel Mount Suitable for MC hose reel Faicom 4 Reel Bracket
48-PFA04 Faicom 4 Reel Bracket Suitable for MC, V, VL, VGL reels
Note: *Reels include hose. Faicom Swivel Mount

Water & Chem
Chemical Hand Pumps
16-001461 Maspel Plunger Pump 60 - 205L drums. Chromed finish. Suits mild soaps, waxes
and thinners. 250ml/stroke
16-112930 Maspel Hand Plunger Pump 20L drums. Suits oils, soaps and water based fluids.
16-112965 Maspel Hand Plunger Pump 60L drums. Suits oils, soaps and water based fluids.
Hand Lever Pump
52-129000-1 GPI Hand Lever Pump 60 - 205L drums. Suits water, antifreeze, mild detergents,
lubricants, Adblue and agricultural chemicals
Maspel 60L Hand Pump Chrome Hand Plunger Pump

Maspel 20L Hand Pump

include gauge.
48-R14 Regulator 1/4” BSP

Air/Filter, Regulator and Lubricator
Nozzles
PART NUMBER PRODUCT CONNECTION DESCRIPTION
52-906008-01 GPI Chemical Auto Nozzle 3/4” BSP P Stainless steel, no swivel
48-PPM90ADB Faicom Manual Nozzle 1” BSP P Plastic, includes swivel
48-P12A95 Faicom Spray Nozzle 1/2” BSP P Chrome plated brass for water
only, includes swivel
30-FD-DP-AH072101 Filcar Fluid Nozzle 3/8" BSP P Stainless Steel Nozzle for Fluid
and Water
Faicom Water Spray Nozzle
GPI Auto Chemical Nozzle Faicom Manual Chemical Nozzle Filcar Fluid Nozzle

ADBLUE

Adblue
ADBLUE HANDLING
Adblue Pump Layout

Typical Setup – Adblue dispensing setup using Electric Pump in
Barrel
Adblue Pump
Barrel Mount
Nozzle
Micromatic and
RSV Coupler
Hose
Adblue Pump Kits

Adblue pump kits come complete with electric pump, nozzle and delivery hose. To prevent contamination, kits also include
micromatic and RSV coupler. A convenient mounting plate is designed for secure component holding as well as ease of transfer
between containers.
PART NUMBER PRODUCT NOZZLE VOLTAGE FLOW RATE POWER HOSE DESCRIPTION
CORD
52-118450-32 GPI P-120DEF-2TC-TOTE Automatic 12 VDC Up to 45 lpm 6m 3.7m Includes micromatic coupler and
Adblue IBC Kit powder coated bracket
52-118450-14 GPI P-120DEF-BRL Barrel Manual 12 VDC Up to 45 lpm 6m 3.7m Includes powder coated bracket
Adblue Kit
48-KP21ADBSPI FIACOM 1,000 Litre IBC Air N/A N/A 26 lpm 4.0m Included pressure regulator with
Operated Kit safety valve
Tote Adblue Kit Tote Adblue Kit Barrel Adblue Kit Fiacom 1,000 Litre IBC
Air Operated Kit

Adblue
Adblue Pump
Manual lever pumps offer economical method for dispensing Adblue fluids from IBC tanks and Barrels. For reliable performance, GPI
manual and electric Adblue pumps are constructed from Adblue compatible materials.
PART NUMBER PRODUCT NOZZLE VOLTAGE FLOW RATE POWER HOSE DESCRIPTION
CORD
52-129000-1 GPI DEF Hand Lever Pump Molded Manual Approx. 0.5L/ N/A N/A Designed for easy pumping
LP-50 Acetal Spout stroke
52-118450-22 GPI P-120DEF-2TC-PO Adblue N/A 12 VDC 45 lpm 6m N/A Includes adjustable suction pipe
Pump
48-DP2101 FIACOM High Performance 2:1 Pneumatic N/A N/A 50 lpm N/A Order drop tube 48-PX01ADBSV for
Pump use with 200L Drums
Hand Lever Pump Electrical Adblue Pump
Adblue Meters
GPI meters provide a economical solution for tracking Adblue dispensing. Available in electronic and mechanical versions, GPI meters
provide accurate and repeatable measurements.
PART NUMBER PRODUCT TYPE POWER FLOW PRESSURE CONNECTIONS DESCRIPTION
52-1113255-24 GPI 01N31GM-U Turbine Meter Nylon Digital 2 x AAA 10 - 100 lpm 150 psi 1” NPT Accuracy +/-5% of reading
Turbine Battery
52-120000-32 GPI FM-300U Disc Meter Digital Disc 1x9V 7 - 76 lpm 50 psi 1” NPT Accuracy +/-2% of reading
Battery
Adblue Electronic Turbine Meter Adblue Electronic Disk Meter

Adblue
Adblue Nozzles & Hoses
Automatic and manual nozzles for Adblue handling. Can be combined with GPI Adblue
compatible hoses for maximum reliability.
PART NUMBER PRODUCT CONNECTION POWER
52-906008-01 GPI Adblue Auto Nozzle 3/4” BSP P No swivel
52-906006-83 GPI Adblue Auto Nozzle 3/4” NPT No swivel
52-906008-02 GPI Adblue Manual Nozzle 3/4” HOSE BARB No swivel
48-PPM90ADB Faicom Adblue Manual Nozzle 1” BSP P Swivel
52-150200-01 GPI Adblue Hose 3/4” NPT 3.7m (12ft) long
52-150200-21 GPI Adblue Hose 3/4” BSP P 3.7m (12ft) long
52-150200-22 GPI Adblue Hose 3/4” NPT, BARB 3.7m (12ft) long Adblue Auto Nozzle
52-150200-23 GPI Adblue Hose 3/4” BARB 3.7m (12ft) long
Adblue Manual Nozzle 3.7m Adblue Hose
Adblue Hose Reels*

Engineered with a robust spring canister, Faicom Adblue reels reliably dispense and
retract hose for dispensing applications. A powder coat finish over a hot galvanised steel
structure ensures the longevity of function and aesthetic.
48-VGL101910ADB VGL 3/4” 10m 19mm 19mm 140 psi Suitable for Adblue
48-VGL101915ADB VGL 3/4” 15m 19mm 19mm 140 psi Suitable for Adblue
VGL Series

Elec. Cable
ELECTRICAL & CABLE MANAGEMENT

Elec. Cable
ELECTRICAL & CABLE MANAGEMENT
Electrical Supply Reels

Heavy gauge steel housing with white polyester baked-on finish, hardware
for wall or ceiling mounting, positive ratchet lock and cord stop, designed
for indoor use.
PART NUMBER PRODUCT HOUSING CORD MAX. WEIGHT

LENGTH AMPS
48-ROLLMAS22015 Faicom HDPE 15m 20 7.5kg

Compact Reel Plastic
48-ROLLMAJ22025 Faicom HDPE 25m 15 7.5kg

Compact Reel Plastic
Gleason Compact Supply Reel
Faicom Curtain Cable Reels

Faicom curtain reels are constructed from galvanised and UV resistant
powder coated steel making it suitable for indoor and outdoor applications.
Curtain reels can be used in dividing working areas for activities such as
washing, grinding, welding and painting. It can also be used to create
temporary in such places as sporting facilities and workshops. Faicom Compact Supply Reel
PART NUMBER PRODUCT DIAMETER LENGTH DESCRIPTION
48-MPRT08 Curtain reel 3mm 8m Automatic reel. No curtain

stainless steel included
48-MPRT11 Curtain reel 3mm 11m Automatic reel. No curtain

stainless steel included
Faicom Curtain Reel
Gleason Static Discharge Reels

Ideal for a wide variety of grounding applications, the Static Discharge
Rees are available with your choice of cable length and connector. All reels
include spring rewind, centrifugal brake and ratchet lock.
PART NUMBER PRODUCT CABLE LENGTH
24-SD2030 Gleason Enclosed Static Discharge Reel 9m No Cable Cover
24-SD2050 Gleason Enclosed Static Discharge Reel 15m No Cable Cover
24-SD2050N Gleason Enclosed Static Discharge Reel 15m Nylon Cable

Cover
Static Discharge Reel

Elec. Cable
Poor cable management on reciprocating or moving machinery such as CNC cutting heads, can result in electrical shorting through wear,
abrasion, kinking, interference with the machine or passing traffic. The correct Cable Management System will ensure an extended life
of cables by preventing damage and wear and thus lowering costs.
The following cable reels and cable management equipment are indicative of those available, part numbers of the other reels including
specialized Cable Reels and ancillary products, are available on request.
Gleason Cable-Master Reels

Gleason Cable-Master Reels are ruggedly built and their design refined over many years of field use, they are ideally suited for smaller
reciprocating gantry crane applications.
PART NUMBER PRODUCT NO. OF MAX. MAXIMUM

CONDUCTORS AMPS CABLE LENGTH
23-CM141-43 Gleason Direct Drive Heavy Duty 4 30 6m

Spring-Driven Electric Cable Reel
23-CM164-83 Gleason Direct Drive Heavy Duty 8 30 18m

Cable Master Reel
Gleason Series “S” Spring-Driven Electric Cable Reels

Gleason Series “S” Heavy Duty Spring-Driven Electric Cable Reels are designed to be
mounted on moving machinery. S-Reels utilize self-contained slip ring assemblies which
transfer current to the cable mounted on the rotating spool.
PART NUMBER PRODUCT NO. OF MAX. MAXIMUM

CONDUCTORS AMPS CABLE LENGTH
23-S16-621-43 Gleason Direct Drive Heavy Duty 4 35 20m

23-S24-801-43 Gleason Direct Drive Heavy Duty 4 75 24m


Series "S" Reel
Gleason “C” Track Festoon Systems

Engineered to run on I Beams, “C” Track and the latest technology allowing “Curved Track”
Festoon Systems. The Gleason Festoon Systems come in a wide range of trolley design used
to carry hose and cable of various diameters, widths and weights safely off the ground.
PART NUMBER PRODUCT ACTIVE STORAGE SYSTEM ACTIVE

TRAVEL DISTANCE LENGTH TRAVEL
24-CR-09-36-2 Gleason “C” Track Festoon 13.8m 1m 14.8 19.5m

System for Round Cable
24-CF-09-36-2 Gleason “C” Track Festoon 15m 1m 16m 17.6m

System for Flat Cable

Cable Festoon System

Elec. Cable
Gleason PowerTrak®
Protect cables and hoses on reciprocating machinery and increase safety by keeping cables and hoses together, away from moving
components and operations. PowerTrak® is available in a variety of styles and materials and can work in both vertical and horizontal
applications.
PART NUMBER PRODUCT WIDTH HEIGHT WINDOW WINDOW MAX. CABLE WEIGHT KG/M
WIDTH HEIGHT O.D
21-132P-II-3.7 Gleason GRP PowerTrak 74mm 34mm 58.0mm 24.9mm 20.8mm 0.67
21-162P-II-3.4 Gleason GRP PowerTrak 74mm 41.2mm 58.0mm 25.4mm 21.1mm 0.88
21-PT35E-11-6R2 Gleason Steel PowerTrak 178mm 68mm 144.6mm 39.4mm 38.0mm 6.53
GRP PowerTrak Steel PowerTrak
Gleason Ergonomic Tool Balance Reels

Series "BD Tool Balancers are the economical choice for balancing tools weighing up to 2.3kg.
Heavy Duty Series "BG" Tool Balancers are constructed for balancing heavier tools & parts weighing up to 12.2kg.

PART NUMBER PRODUCT CABLE REEL MIN-MAX RATCHET

LENGTH WEIGHT LOAD LOCK
24-BD-03 Ecomonical Tool Balancer 1.8m 0.6 Kg 0.5kg - 1.4kg No
24-BD-05 Ecomonical Tool Balancer 1.8m 0.6kg 1.4kg - 2.3kg No
24-BG-07 Heavy Duty Tool Balancer 2.4m 2.7kg 2.3kg - 4.5kg No
24-BG-07-L Heavy Duty Tool Balancer 2.4m 2.7kg 2.3kg - 4.5kg Yes
24-BG-25 Heavy Duty Tool Balancer 2.4m 3.6kg 9.9kg - 12.2kg No BG Series

BD Series

MITYVAC

Mityvac
MITYVAC – AUTOMOTIVE & VACUUM RELATED TOOLS & EQUIPMENT
Mityvac brand of hand vacuum pumps and kits, fluid evacuators, brake and clutch bleeding kits, engine diagnostic equipment, cooling
system testers and other specialty tools and accessories.
Cooling System Testing & Diagnostic Equipment
12-MV4506 Universal Cooling System Adaptor Includes universal cooling system adapter and user's manual
12-MV4510 Motorcycle Cooling Test Kit Includes Mityvac Selectline hand pressure pump with Ø50mm gauge; low-profile Bayonet test adapter;
Bayonet cap test adapter; connection hose; compression nut and user manual
12-MV4525 Cooling System Test and Refill Kit Includes pressure pump; Ø64mm diaphragm style compound gauge with hanging hook; Venturi vacuum; valve
coupler; temperature probe; (2x) 760mm extension hose; 1.5m refill hose; 1.5m drain hose; cap wrench; hose
clip; MVA100 cooling system adapter (US and foreign cars); MVA101 cooling system adapter (Asian cars);
MVA102 cooling system adapter (Asian cars); MVA103 cooling system adapter (US and foreign cars); custom
molded case; user manual and adapter selection guide
12-MV4530 Cooling System Pressure Test Kit Includes hand pressure pump with 610mm long hose and push-button pressure relief valve; MVA100 cooling
system adapter (US and foreign cars); MVA101 cooling system adapter (Asian cars); MVA102 cooling system
adapter (Asian cars); MVA103 cooling system adapter (US and foreign cars); cap wrench; custom molded case;
user manual and adapter selection guide
12-MV4535 Cooling System Air Evacuation Kit Includes Ø64mm diaphragm style vacuum gauge with hanging hook; Venturi vacuum; valve coupler; universal
cooling system adapter; (2x) 760mm extension hose; 1.5m refill hose; custom molded case and user manual
12-MV4560 Cooling System Pressure Test Kit Includes Mityvac Selectline hand pressure pump with Ø50mm gauge; small Bayonet test adapter – deep; small
Bayonet test adapter – shallow; large Bayonet test adapter; GM/Ford test adapter; small Bayonet cap test
adapter; large Bayonet/GM/Ford cap test adapter; connection hose; compression nut and user manual
12-MV4529 Cooling System Pressure Tester Includes high-quality pressure pump and adapter for connecting to bayonet style radiator and coolant bottle
necks
Universal Cooling Motorcycle Cooling Cooling System Pressure Cooling System

System Adaptor Test Kit Test Kit Pressure Tester
Cooling System Test Cooling System Pressure Cooling System Air Evacuation Kit
and Refill Kit Test Kit

Mityvac
Engine Diagnostic Equipment
12-MV5511 Vacuum Pressure Test Gauge and Includes 90mm compound gauge (readings indicated in psi, kg/cm2, in. Mercury (Hg), and cm Mercury (Hg))
Fuel Pump Tester with barb fitting; 24” (610mm) oil-resistant hose; universal fuel line adapter; tapered adapter; tee adapter and
user manual
12-MV5515 Fuel Injector Pressure Test Kit Includes Ø70mm Bourdon tube gauge (readings indicated in psi and kPa) with manual pressure release,
380mm braided hose and GM/Chrysler adapter; Ford adapter; 1.8m fuel drain hose and user manual
12-MV5520 Compression Tester Includes Ø70mm Bourdon tube gauge (readings indicated in four (4) scales of measure (bar, psi, kPa, and kg/
cm²) with pressure release and quick-change coupler; 14mm and 18mm short-thread adapter with 380mm
hose; 14mm long-thread adapter and user manual
12-MV5525 Compression Tester Includes Ø70mm Bourdon tube gauge (readings indicated in psi and kPa) with manual pressure release,
380mm braided hose and GM/Chrysler adapter; Ford adapter and 1.8m fuel drain hose
12-MV5530 Pro Compression Test Kit Includes Ø70mm gauge with high impact lens, rubber boot, and four (4) scales of measure (psi, kg/cm², bar,
kPa), attached to 250mm hose and quick release coupler; 14mm short-thread adapter with 165mm and 305mm
hoses; 14mm long-thread adapter with 305mm hose; 18mm short-thread adapter with 305mm hose; 14mm
short-thread x 18mm long-thread adapter; 10mm thread small engine adapter; 12mm thread small engine
adapter; quick-release air hold adapter; custom blow-molded case; field service kit and user manual
12-MV5532 Digital Compression Test Kit Includes digital compression tester comprising of test gauge with rubber boot, 250mm high-pressure hose
and female quick-change coupler; 14mm standard reach thread x 165mm hose adapter; 14mm standard reach
thread x 305mm hose adapter; 14mm reach thread x 305mm hose adapter; 18mm standard reach thread x
305mm hose adapter;18mm reach male thread x 14mm standard reach female thread plug adapter; 16mm
male thread x 14mm standard reach female thread plug adapter; 10mm male thread x 14mm standard reach
female thread plug adapter; 12mm male thread x 14mm standard reach female thread plug adapter; air hold
adapter; field service kit; custom-molded case and user manual
12-MV5534 Analog Compression Test Kit Includes compression tester comprising of glycerin-filled test gauge with rubber boot, 380mm long high
pressure hose and quick-change coupler; custom-molded case and user manual
Vacuum Pressure Test Gauge Compression Tester Fuel Injector Pressure Test Kit
and Fuel Pump Tester
Pro Compression Test Kit Digital Compression Test Kit Analog Compression Test Kit

Mityvac
Engine Diagnostic Equipment (cont.)
12-MV5535 Digital Diesel Compression Test Kit Includes digital compression tester comprising of
test gauge with rubber boot, 380mm long, high-
pressure hose, quick-change coupler; adapters
MVA5601, MVA5602, MVA5603, MVA5604,
MVA5605, MVA5606, MVA5607; injector adapter
(Dodge 24 V 5.9L Cummins (1999-2003), 5.9L
Cummins ISB and ISBE); injector adapter (Case/
Cummins Series “B” 2.9L, 3.9L, 5.9L through 1998);
glow plug adapter (GM 4.3L, 5.7L (1978-1985),
Navistar 6.9L, 7.3L through 1994); glow plug adapter
(GM 6.2L, 6.5L V8); glow plug adapter (Ford/Navistar
7.3L Power Stroke (1994-2003)); glow plug adapter
(Volkswagen 1.9L TDI); right-angle adapter; field Digital Diesel Compression Test Kit
service kit; custom-molded case; user manual
12-MV5545 Fuel System Test Kit Includes 90mm high pressure gauge with rubber
boot, push-button relief valve, and hanging hook;
flow meter with borosilicate glass flow tube,
patented flow-control valve, and 1 gallon/min
maximum flow capability; (2x) 1.2m long flow meter
hose; clear bypass and pressure relief hoses; (2x)
fuel hose clamp; adapters for connecting to U.S.,
European, and Asian manufactured cars and light
trucks; flow meter faceplates with gallons/minute
and liters/minute units of measure; custom molded
case; operator manual
12-MVA5552 Pressure Test Accessory Kit Includes 1.2m long fuel pressure test hose; right
angle adapter for Schrader style fuel rail test
ports with 7/16 x 20 thread; right angle adapter for
Schrader style fuel rail test ports with 0.308 x 32
thread; inline adapter for Schrader style fuel rail
test ports with 7/16 x 20 thread; inline adapter for
Schrader style fuel rail test ports with 0.308 x 32 Pressure Test Accessory Kit
thread; operator manual
12-MVA5612 Glow Plug Adaptor Includes Mityvac adaptor model 12-MVA5612

(thread size M10 x 1.25) fits the below make and
model vehicles; Ford Escort, Lynx, Tempo, Topaz
(1984-85); Ford/Mazda 2.0L and 2.2L Ford products
including Ranger; Lincoln Mark VII, Continental with
Volvo engines; Mitsubishi 2 and 3 cylinder engines,
some Fuso; Nissan 2.2L and Medium UD truck;
Toyota 2.2L
12-MVA510 GM Test Port Adaptor Fits GM and some Chrysler vehicles with 7/16 x 20 Glow Plug Adaptor
thread test port on fuel rail
12-MVA511 Ford Test Port Adaptor For Ford and some Chrysler vehicles with 0.308 x 32
thread test port on fuel rail
GM Test Port Adaptor
Fuel System Test Kit Ford Test Port Adaptor

Mityvac
Specialty Tools & Equipment
12-MV5565 Fuel Injection Cleaning Kit Includes fuel injection cleaner assembly with pressure
regulator, gauge, valves, fittings, and 950ml canister; 1.2m
long connection hose; wall mount bracket and user manual
regulator, gauge, valves, fittings, and 950ml canister; 1.2m
long connection hose; 16 fuel injection system connectors
in custom-molded case (12-MVA565); wall mount bracket
and user manual
regulator, gauge, valves, fittings, and 950ml canister; wall
mount bracket and user manual
12-MV7241 Fluid Transfer Pump Includes hand pump with intake and discharge ports;
2 intake/discharge hoses; 2 intake/discharge hose
connectors; inline reducer; air-pressure hose; dipstick hose;
instruction manual
Fluid Evacuation & Dispensing Equipment
PART NUMBER PRODUCT DESCRIPTION Fuel Injection Cleaning Kit
12-MV6410 ATF Refill System Includes 5L fluid reservoir; reservoir lid with integrated
manual pump, pressure gauge, and pressure relief valve;
1.5m fluid dispensing hose with flow control and auto-
shutoff valves; 12-MVA5800 ATF refill adapter kit (includes
ten adapters, part No's. 12-MVA580 – 12-MVA589); fluid
dispensing wand; hanging hook and user manual
12-MV7201 Fluid Evacuator Plus Includes 5L fluid reservoir; reservoir lid with integrated
manual pump, pressure gauge, and pressure relief valve;
1.5m fluid dispensing hose with flow control and auto-
shutoff valves; 12-MVA5800 ATF refill adapter kit (includes
ten adapters, part No's. 12-MVA580 – 12-MVA589); fluid
dispensing wand; hanging hook and user manual
12-MV7400 7.3L Fluid Evacuator Includes fluid evacuator; 5.7mm O.D. x 1.5m long dipstick
tube; 6.6mm O.D. x 1.5m long dipstick tube; 10mm O.D. x
1.5m long main evacuation tube; tube adapters and user Fluid Transfer Pump
manual
12-MV6400 Fluid Dispensing System Includes 5L resevoir with integrated pump pressure gauge
and relif valve. 12cm dispensing hose with flow control and
auto shutoff valve.
ATF Refill System Fluid Dispensing System ATF Refill System 7.3L Fluid Evacuator

Mityvac
Brake & Clutch Bleeding Equipment
12-MV6830 Airbrake Bleeder and Evacuator Includes brake bleeder; 1.8m bleed hose assembly; 1.2m fluid evacuation hose; molded base with screws for
bench mounting; automatic fluid refill kit (12-MVA6825); hanging hook; 3 universal bleed screw adapters and
user manual
12-MV6835 Premium Vacuum Brake Bleed Kit Includes brake bleeder; 1.8m bleed hose assembly; 1.2m fluid evacuation hose; molded base with screws
for bench mounting; clamp-on style automatic fluid refill kit (12-MVA6832); hanging hook; 3 Universal bleed
screw adapters and user manual
12-MV6838 Master Vacuum Bleed Kit Includes brake bleeder; 1.8m bleed hose assembly; 1.2m fluid evacuation hose; molded base with screws for
bench mounting; master automatic fluid refill kit (12-MVA6832 plus 12-MVA6834); hanging hook; 3 universal
bleed screw adapters and user manual
12-MV6840 Pressure Bleed System Includes 5L fluid reservoir; reservoir lid with integrated manual pump, pressure gauge, and pressure relief
valve; 1.5m fluid dispensing hose with flow control and auto-shutoff valves; 12-MVA6850 pressure bleed
adapter kit (includes seven master cylinder adapters); fluid dispensing wand; hanging hook and user manual
12-MV8020 Selectline Automotive Brake Includes Selectline hand vacuum pump (Model No. 12-MV8030); 135ml fluid reservoir bottle with fluid transfer
Bleed Kit and storage lids; 2 tapered bleed screw adapters; 2 universal bleed screw adapters; 6.4mm I.D. x 40mm long
connection tube; 6.4mm I.D. x 610mm long connection tube and user manual
12-MV7605 Hose Clamp This tool works great for clamping flexible coolant, fuel, vacuum and brake lines or hoses up to 1/2” (13mm) in
diameter
Airbrake Bleeder and Evacuator Premium Vacuum Brake Bleed Kit Master Vacuum Bleed Kit
Pressure Bleed System Selectline Automotive Brake Bleed Kit Hose Clamp

Mityvac
Brake & Clutch Bleeding Equipment (cont.)
12-MVA6181 Vacuum Gauge Kit Durable, high-quality vacuum gauge with accurate diaphragm movement, the special stem design allows
convenient 360° rotation of gauge and easy pin-release removal. This gauge replaces the original gauge on
Mityvac Selectline 12-MV8010 hand pumps or additional option for pumps purchased without gauge.
Indicates 0 - 30” of Mercury (0 - 100 kPa) vacuum
12-MVA6836 Master Auto-Refill Kit Includes clamp-on, gravity feed refill kit 12-MVA6832; 1.2L fluid reservoir with transfer and storage lid; base
with screw clamp; transfer tube with valve; level adjustment spring; 355ml and 946ml bottle adapters plate-
style auto-refill upgrade kit 12-MVA6834; rectangular dual chamber refill plate; round refill plate; adjustable
length rubber cords; fluid transfer tubes with connectors; reservoir hanging hook and user manual
12-MVA809 Universal Bleed Adaptor Features universal round cone secured with chain. The 12-MVA809 adaptor is used for varying universal
applications and offer a unique adjustable clamping design that applies pressure to the center of the adapter
for a more uniform seal
Vacuum Gauge Kit Master Auto-Refill Kit
Pressure Bleed System – 12-MVA809 Pressure Bleed System – 12-MVA810 Pressure Bleed System – 12-MVA812

Mityvac
Hand Vacuum Pumps
12-MVA7210 Transmission Refill Kit Includes shut-off valve and quick connect coupler
12-MV8000 Automotive Test and Bleed Kit Includes Selectline hand vacuum pump (Model No.
MV8010) with 50mm gauge; 135ml fluid reservoir
bottle with fluid transfer and storage lids; 4 tapered Transmission Refill Kit
adapters for connecting to tubing from 2.3mm to
13mm I.D.; 2 tapered manifold plugs; 2 tapered
bleed screw adapters; 2 universal bleed screw
adapters; vacuum line T-adapter; 4mm I.D. x 6.4mm
I.D. tubing adapter; rubber cupped adapter; (2)
6.4mm I.D. x 610mm long connection tubes; 6.4mm
I.D. x 40mm long connection tube; 6.4mm I.D. x
90mm long fluid pick-up tubes; 4mm I.D. x 75mm
long vacuum test tube and user manual
12-MV8010 Selectline Pump with Gauge Includes pinned connection allows 360° gauge
rotation for improved visibility and pivoting lever
action handle maximizes output with minimal
operator effort
12-MV8255 Selectline Pump with Gauge Includes 50mm gauge and pivoting lever action
handle maximizes the high output with minimal
operator effort
12-MV8500 Silverline Elite Hand Pump Kit Includes Silverline Elite hand vacuum/pressure
pump (Model No. 12-MV8510) with Ø50mm Selectline Superpump with Gauge
compound gauge and rubber boot; 135m fluid
reservoir bottle with fluid transfer and storage lids;
4 tapered adapters for connecting to tubing from
2.3mm to 13mm I.D.; 2 tapered manifold plugs; 2
tapered bleed screw adapters; 2 universal bleed
screw adapters; 12 vacuum cap plugs; vacuum line
T-adapter; 4mm I.D. x 6.4mm I.D. tubing adapter;
rubber cupped adapter; (2) 6.4mm I.D. x 610mm
long connection tubes; 6.4mm I.D. x 40mm long
connection tube; 6.4mm I.D. x 90mm long fluid pick-
up tubes; 4mm I.D. x 75mm long vacuum test tube;
master cylinder refill kit (Model no. 12-MVA6825);
custom molded case and user manual
12-MV8510 Silverline Elite Hand Pump Includes gauge and dual converter
12-MV8121 Selectline Superpump without Includes pivoting lever action handle maximizes the
Gauge high output with minimal operator effort
Silverline Elite Hand Pump
Silverline Elite Hand Pump Kit Automotive Test and Bleed Kit
Selectline Superpump without Gauge

Mityvac
Hand Vacuum Pumps (cont.)
12-MVM8900 MV8510 Pump Rebuild Kit Service kit for Silverline hand pump, model
12-MVM8510
12-MVM8903 MV8255 Maintenance Kit Service kit for Selectline hand pump, models
12-MV8255 and 12-MV8257
12-MVM9002 MV7201 Retrofit Kit Includes lid gasket and valve-to-reservoir tube with
pressure relief valve Compound Gauge
12-MVM4100 Silverline Maintenance Kit Service kit for discontinued hand pump, models
12-04010 and 12-04555
12-MVM5100 Superpump Maintenance Kit Service kit for discontinued hand pump, models
12-MV6212, 12-MV6210 and 12-MV6265
12-MVM6100 Pump Maintenance Kit Service kit for discontinued hand pump, models
12-MV6206, 12-MV6203 and 12-MV6255.
12-MVA6170 Compound Gauge Compound pressure gauge max. pressure 200 kPa
12-MVA6176 Compound Gauge Durable, high-quality 2” diameter compound Compound Gauge

vacuum/pressure gauge with accurate gearless
diaphragm movement and protective rubber boot.
Special stem design allows convenient 360° rotation
and easy pin-release and removal
12-MV5546 Fuel Preesure Test Kit 30mm high-pressure gauge with rubber boot,
push-button relief valve, and hanging hook. 1.2m
hose, 1/4 turn valve, 37 assorted adapters for US,
European and asian manufactured vehicles. Pressure
relief hose, customer molded case.
MV7201 Retrofit Kit
MV8510 Pump Rebuild Kit MV8255 Maintenance Kit Silverline Maintenance Kit
Superpump Maintenance Kit Pump Maintenance Kit Fuel Preesure Test Kit

Mityvac
Accessories
12-MVA6000 Complete Auto Accessory Kit Includes (4) tapered adapters for connecting to
tubing from 2.3mm to 12.7mm I.D.; (2) tapered
manifold plugs; (12) color-coded vacuum line plugs;
(2) universal bleed screw adapters for connecting to
hydraulic bleed screws; automatic master cylinder
refill kit; 4.5oz reservoir bottle with fluid transfer and Extended Tube Kit
storage lid; (2) 6.4mm I.D. x 610mm long connection
hoses and user manual (English/French)
12-MVA6001 Fluid Transfer Kit Includes 135ml capacity reservoir bottle with fluid
transfer and storage lids; 6.4mm I.D. x 40mm long)
connection tube; 4mm I.D. x 75mm long connection
tube; (2) 6.4mm I.D. x 90mm long fluid pick-up and
connection tubes; rubber cupped adapter; 4mm I.D.
x 6.4mm I.D. tubing adapter; (4) tapered adapters
for connecting to tubing from(2.3mm I.D. to 12.7mm
I.D.; (2) tapered manifold plugs; Ø70mm mason jar
lid; Ø84mm wide-mouth mason jar lid; 6.4mm I.D. x
1220mm long connection tube; adapters for tubing
sizes 3.2mm - 13mm O.D. (1/8” - 1/2” O.D.) and 6.4mm
- 9.5mm I.D. (¼” - 3/8” I.D.)
and 9.5mm I.D. x 1220mm long connection tube
Dual Adaptor Bleed Kit
12-MVA6006 Extended Tube Kit Includes 5.7mm O.D. x 2.4m long dipstick tube
with connector; 6.6mm O.D. x 2.4m long dipstick
tube with connector; 10mm O.D. x 2.4m long main
evacuation tube with connector
12-MVA6007 Dual Adaptor Bleed Kit Includes clear 6.4mm I.D. hoses and two universal
bleed adapters
12-MVA6910 4oz Reservoir Kit Includes 135ml capacity reservoir bottle; Fluid
transfer lid; Fluid storage lid and 6.4mm I.D. x 90mm
long fluid pick-up tube
12-MVA660 Power Steering Adaptor For use with Mityvac hand vacuum pumps to
reduce bleed time following power steering repairs.
Universal cone-shaped design fits snuggly into the Power Steering Adaptor
neck of many power steering reservoirs, to form an
air-tight seal when vacuum is applied
Complete Auto Accessory Kit Fluid Transfer Kit 4oz Reservoir Kit

FIRE EXTINGUISHERS

Fire Extinguisher
FIRE EXTINGUISHERS
All Muster extinguishers; comply to Australian Standard AS/NZS 1841.6,
and include stainless steel handles, brass valves and powder coated red
finish.
Portable
PART NUMBER PRODUCT CAPACITY RATING
43-G1ABE-FF2 ABE, Dry Chemical Powder 1.0kg 1A20BE
43-G1.5ABESVB ABE, Dry Chemical Powder 1.5kg 2A20BE
43-G2.5ABEVB ABE, Dry Chemical Powder 2.5kg 3A40BE
43-G4.5ABE ABE, Dry Chemical Powder 4.5kg 4A60BE ABE Carbon Dioxide (CO2)
43-G4.5ABEHP ABE, Dry Chemical Powder 4.5kg 4A80BE
43-G6ABE ABE, Dry Chemical Powder 6.0kg 4A80BE
43-G9ABE ABE, Dry Chemical Powder 9.0kg 6A80BE
43-G9ABEHP ABE, Dry Chemical Powder 9.0kg 6A80BE
43-G3.5CO2 Carbon Dioxide (CO2) 3.5kg 5BE
43-G5CO2 Carbon Dioxide (CO2) 5.0kg 10BE
43-G9LAFFF AFFF Foam 9.0L 3A30BE
43-G7LWC Wet Chemical (W/C) 7.0L 3A4F
43-G9LAW Air / Water 9.0L 3A

AFFF Foam Wet Chemical
Automatic & Trolley Mounted
PART NUMBER PRODUCT CAPACITY
43-M6KGAuto79 ABE Automatic ABE 6kg

ABE Automatic
43-M9KGAuto79 ABE Automatic ABE 9kg
43-M30ABEM ABE Trolley Mounted 30kg
43-M90ABEM ABE Trolley Mounted 90kg Air / Water
43-M50BEM BE Trolley Mounted 50kg
43-M45CO2M CO2 Trolley Mounted 45kg
43-M30LAFFF AFFF Trolley Mounted 30L

ABE Mobile
Carbon Dioxide (CO2) AFFF Foam Mobile

Fire Extinguisher
Extinguisher Servicing
Fire Extinguishers installed in all commercial, public and multi-occupancy residential buildings all need to be regularly inspected
and tested. The inspection, test and maintenance procedures for fire extinguishers are specified in the Australian Standard AS 1851
”Maintenance of Fire Protection Systems and Equipment”.
There are some key points that the general community and property owners should be aware of, to ensure they receive the appropriate
level of servicing.

Servicing Requirements Servicing Personnel
All extinguishers have to be inspected every six Servicing technicians need to identify
months. Checks include: themselves to a person responsible for the
building before completing any work
Hydrostatic testing date stamp is within 5
years The service personnel should sign off all
necessary documentation and then explain
Extinguisher gauge is within operating range
what service work they are charging for
Previous test and servicing dates are marked
Small and large service companies carry out
on a metal tag attached to each unit
extinguisher servicing. Only in Queensland do
The entire extinguisher is undamaged the service technicians need to be licensed
including the cylinder body, valve handle and
There are courses in extinguisher
hose/horn
maintenance available nationally. These
Safety pin is undamaged courses are not relevant if the company
Area has no new hazards present that may is only supplying the pre-stamped new
be outside of the extinguisher’s capability extinguisher
If partially discharged, an extinguisher will

require specialised workshop refilling
Type of Fire, Class and Suitability
EXTINGUISHING WATER WET FOAM POWDER POWDER CARBON VAPORISING FIRE

AGENT CHEMICAL ABE BE DIOXIDE LIQUID BLANKET
A Wood, paper, and

LIMITED LIMITED
plastic
B Flammable and
LIMITED LIMITED LIMITED
combustible liquids
C Flammable gases
LIMITED
E Electrically energised
equipment
F Cooking oils and fats

Fire Extinguisher
Portable Extinguisher Support & Accessories
43-FS100 Fire Blankets 1.0m x 1.0m
43-SILS Location Signs – Extinguisher Generic ID Sign and silhouette
43-SILS-ANGLE Location Signs – Extinguisher Generic 90° ID Sign and silhouette
43-SABE Location Signs – ABE Powder ID Sign and application details

Fire Blanket Extinguisher Bags
43-SAF Location Signs – Foam ID Sign and application details
43-SW Location Signs – Water ID Sign and application details
43-SWC Location Signs – Wet Chemical ID Sign and application details
43-SC02 Location Signs – C02 ID Sign and application details
43-WVBC25 Fixed Vehicle Bracket Suits 2.5kg
43-WVBC45 Fixed Vehicle Bracket Suits 4.5kg
43-WVBPC9 Fixed Vehicle Bracket Suits 9.0kg
43-WVBOC45 Over Centre Vehicle Bracket Suits 4.5kg
43-WVBOC9 Over Centre Vehicle Bracket Suits 9.0kg

Location Signs
43-WUVL Extinguisher Bags Suits 6kg - 9kg
43-WUVS Extinguisher Bags Suits 4.5kg
M2ST01 9” Security Ties Thick tamper proof seals
M2SP01 Service Punch Maintenance punch

(numbered 1 to 5)
M2TT01 Date Tag Metal Aluminium
M2SR01 Date Tag Split Ring Split ring to secure tag
43-HREEL36 Standard Fire Hose Reel AS/NZ 1221 approved. Zinc

plated construction. 1350 kPa
working pressure.
43-HRC-HD Hose Reel Cover Heavy duty PVC
43-HRC Hose Reel Cover Outdoor heavy duty
43-HRCF Hose Reel Cover Fitted Standard Fire Hose Reel
Fitted Hose Reel Cover Heavy duty PVC Hose Reel Cover Outdoor heavy duty Hose Reel Cover

QUICK REFERENCE

QUICK REFERENCE GUIDE
Piston & Electric Pumps
PART NUMBER POWER SIZE RATIO/ DELIVERY DESCRIPTION COMMENT PAGE

TYPE
48-GP7241 Air 12 - 20kg 58:1 1500g/min GP72 Series Pump Only 10
48-GPM6594 Air 180 - 200kg 58:1 4100g/min GP 62 Series Pump Only 10
48-KP7247E Air 18 - 30kg 58:1 600g/min GP72 Series Pump Trolley Kit 11
48-KP7247P Air 18 - 30kg 58:1 600g/min GP72 Series Pump Carry Kit 11
48-KP7294HR Air 180 - 200kg 58:1 600g/min GP72 Series Pump Wall Kit 11
48-DP4117 Air Oil Stub Pump 4:1 21L/min DP41 Series Pump Only 22
48-DP6117 Air Oil Stub Pump 6:1 15L/min DP61 Series Pump Only 22
48-DPL6122 Air Oil Stub Pump 6:1 18L/min DP61 Series Pump Only 22
48-DPL612294 Air 205L 6:1 18L/min DP61 Series Pump Only 22
48-KP41M110 Air 205L 4:1 21L/min DP41 Series Pump Wall Kit 21
48-KPL41M110 Air 205L 4:1 26L/min DP41 Series Pump Wall Kit – High Flow 21
48-KP61M110 Air 205L 6:1 15L/min DP61 Series Pump Wall Kit 21
48-KP61M110HR Air 205L 6:1 15L/min DP61 Series Pump Wall Kit for Hose Reel 21
48-KP4194SC Air 205L 4:1 10L/min DP41 Series Pump Kit with Meter 21
48-KP41OILSPI Air 1000L IBC 4:1 10L/min DP41 Series Pump Kit 21
48-KP41OILSPIAV Air 1000L IBC 4:1 10L/min DP41 Series Pump Kit 21
52-142100-03 12 VDC 205L Gear 15L/min L5016 Pump Kit 18
52-118000-9 12 VDC Adjust. to 205L Gear 30L/min P-200-BV Pump Kit 18
52-142100-02 230 VAC/50 Hz 205L Gear 30L/min L5132 Pump Kit 18
15-F0031002A 24 VDC Gear 4L/min Viscomat 60/1 Oil Pump Pump only 18
15-F0031001A 24 VDC Gear 10L/min Viscomat 60/2 Pump only 18
15-F00303M00 230 VAC/ 50 Hz Vane 50L/min Viscomat 90 M Pump only. 18
15-000303000 415 VAC/three phase Vane 25L/min Viscomat 90T Pump Pump only 18
15-F00268000 12 VDC 205L Gear 5L/min Viscomat 60/1 Pump Kit Pump kit 18
15-F00263210 12 VDC 205L Gear 6L/min Viscotroll 120/1 Pump Pump Trolley Kit 18
and Trolley Kit
15-F0026303D 230 VAC/ 50 Hz 205L Gear 9L/min Viscotroll 200/2 Pump Pump Trolley Kit 18
and Trolley Kit
48-DP411794NK Air 205L 4:1 22L/min Pump Only 28
Continued on next page
GREASE OIL WASTE OIL DIESEL WATER & CHEMICAL ADBLUE

PART NUMBER POWER SIZE RATIO/TYPE DELIVERY DESCRIPTION COMMENT PAGE
52-110000-99 12 VDC Adjust. to 205L Gear 57L/min M-150S-ML Pump Kit – Manual Nozzle 31
52-110000-100 12 VDC Adjust. to 205L Gear 58L/min M-150S-AU Pump Kit – Automatic Nozzle 31
52-133240-1 12 VDC Adjust. to 205L Vane 95L/min M3025-ML Pump Kit – Manual Nozzle 31
52-133260-02 24 VDC Adjust. to 205L Vane 98L/min M3425-AD Pump Kit – Automatic Nozzle 31
52-133210-01 230 VAC/50 Hz Adjust. to 205L Vane 64L/min @ 50 Hz M-3260-ML Pump Kit – Manual Nozzle 31
15-00021800B 12 VDC Adjust. to 205L Vane 50L/min Piusi 205L Drum Pump Kit Pump Kit 31
15-00021900B 24 VDC Adjust. to 205L Vane 50L/min Piusi 205L Drum Pump Kit Pump Kit 31
15-000271P00 230 VAC/ 50 Hz Adjust. to 205L Vane 56L/min Panther 56 drum pump kit Pump Kit 31
15-000272P00 230 VAC/ 50 Hz 230 VAC/ 50 Hz Vane 56L/min Panther 56 drum pump Pump Kit 31
kit with meter
52-118000-1 12 VDC No pick up tube Gear 45L/min GPI P-120H-2UR Pump Only 38
52-118000-2 12 VDC No pick up tube Gear 30L/min GPI P-200H-2UR Pump Only 38
48-DP2101 Air No pick up tube 2:1 50L/min DP21 SERIES Pump Only 38
48-DP411794NK Air 205L 4:1 22L/min DP41 SERIES Pump Only 38
52-118450-22 12 VDC 205L Gear 45L/min P-120DEF-2TC-PO Pump Only 46
52-118450-32 12 VDC 1000L IBC Gear 45L/min P-120DEF-2TC-TOTE Pump Kit – Automatic Nozzle 45
52-118450-14 12 VDC 205L Gear 45L/min P-120DEF-BRL Pump Kit – Manual Nozzle 45
48-KP21ADBSP1 Air 1000L IBC 2:1 26L/min DP21 SERIES Pump Kit – Manual Nozzle 45
48-DP2101 Air No pick up tube 2:1 50L/min DP21 SERIES Pump Only 46
GREASE OIL WASTE OIL DIESEL WATER & CHEMICAL ADBLUE
Electrical Supply Reels
PART NUMBER DESCRIPTION MAX. POWER MAX. CABLE PAGE

LENGTH
48-ROLLMAS22015 Compact Cable Reel with Cable 240 VAC/50 Hz 15m 49
48-ROLLMAJ22025 Compact Cable Reel with Cable 240 VAC/50 Hz 25m 49
24-SD2030 Static Discharge Reel 9m 49
24-SD2050 Static Discharge Reel 15m 49
24-SD2050N Static Discharge Reel 15m 49
23-CM141-43 Cable Master Reel 600 VAC 3 Pole 35amps 6m 50
23-CM164-83 Cable Master Reel 600 VAC 8 Pole 35amps 18m 50
23-S16-621-43 Series "S" Cable Reel 600 VAC 4 Pole 35amps 20m 51
23-S16-801-43 Series "S" Cable Reel 600 VAC 4 Pole 35amps 24m 51

Diaphragm Pumps
PART NUMBER BODY FLUID CON- MAX. FLOW MAX. AIR NOISE LEVELS DIAPHRAGM VALVE/ VALVE SEAT O-RINGS APPLICATION
MATERIAL NECTIONS RATE PRESSURE MATERIAL BALL
51-A050-BAA-GGPN-000 Aluminium 1/2” BSP F 56.8L/min 8.2 bar 80 Dba (with muffler) Geolast Geolast Polypropylene Buna-N 32 19 27
(15 gpm) (120 psi)
51-A050-BAA-VVAV-000 Aluminium 1/2” BSP F 56.8L/min 8.2 bar 80 Dba (with muffler) Viton Viton Aluminium Viton 32 19 27
(15 gpm) (120 psi)
51-AB-10-P15 Aluminium 1” BSP 155.8L/min 8.2 bar 80 Dba (with muffler) Geolast Geolast Polypropylene Nitrile 32 19 27
(41 gpm) (120 psi)
51-A200-BAA-VVYV-000 Aluminium 2” BSP F 719L/min 8.2 bar 76 Dba (with muffler) Viton Viton Nylon Viton 32 19 27
(190 gpm) (120 psi) 103 Dba (without)
Quality Industry Solutions | www.jsgindustrial.com

51-AN-30-P15 Aluminium 3” BSP F 965L/min 8.2 bar 86 Dba (with muffler) Nitrile Nitrile Polypropylene Nitrile 32 19 27
(255 gpm) (120 psi)
51-PB-05 Polypropylene 1/2” NPT/ 64.6L/min 8.2 bar 83 Dba (with muffler) Geolast Geolast Polypropylene Nitrile 39 39 39
BSP (17 gpm) (120 psi)
51-NC-10-P15 Polypropylene 1” BSP 155.8L/min 8.2 bar 80 Dba (with muffler) Geolast Geolast Polypropylene Nitrile 39 39 39
(41 gpm) (120 psi)
51-PB-10 Polypropylene 1” ANSI/ 155.8L/min 8.2 bar 80 Dba (with muffler) Geolast Geolast Polypropylene Nitrile 39 39 39
DIN Flange (41 gpm) (120 psi)
51-BK-10V-P15 Polypropylene 1” BSP 152L/min 6.8 bar 80 Dba (with muffler) Viton Viton Polypropylene Viton 39 39 39
(41 gpm) (100 psi)
CHEMICAL GLYCOL WATER DIESEL OIL WASTE OIL
69
Hose Reels
PART NUMBER SERIES MAX. HOSE MAX. HOSE SWIVEL INLET OUTLET MAX. WORKING APPLICATION
48-MC601210 MC 1/2” 10m 1/2” BSP M 1/2” BSP M 840 psi 42 42 24
48-V181315 V 1/2” 15m 1/2” BSP M 1/2” BSP M 250 psi 42 42
48-VL601220 VL 1/2” 20m 1/2” BSP M 1/2” BSP M 840 psi 42 42
48-BG181325 BG 1/2” 25m 1/2” BSP F 1/2” BSP M 840 psi 42 42 24
48-BG600115 BG 1” 15m 1” BSP F 1” BSP F 840 psi 42 42
48-VX4H3815 * VX 3/8” 15m 3/8” BSP F 3/8” BSP M 5600 psi @ 150°C 42
48-VGLX101915K ** VGLX 3/4” 15m 19mm 3/4” BSP F 140 psi @ 150°C 42
48-V601215 V 1/2” 15m 1/2” BSP M 1/2” BSP M 840 psi 24
48-VGL603415 VGL 3/4” 15m 1” BSP M 3/4” BSP F 840 psi 24
48-VGL101910ADB VGL 3/4” 10m 19mm 19mm 140 psi 47
48-VGL101915ADB VGL 3/4” 15m 19mm 19mm 140 psi 47
48-VGM600115 VGM 1” 15m 1” BSP F 1” BSP M 840 psi 24
48-V4G1415 V 1/4” 15m 1/4” BSP F 1/4” BSP M 6000 psi 13
48-VL4G1420 VL 1/4” 20m 1/4” BSP F 1/4” BSP M 5600 psi 13
48-VL4G3815 VL 3/8” 15m 3/8” BSP F 3/8” BSP F 5600 psi 42 13
48-VL4H3820 VL 3/8” 20m 3/8” BSP F 3/8” BSP M 5600 psi 42
48-V181315 V 1/2” 15m 1/2” BSP M 1/2” BSP M 250 psi 36
48-VG603408 VG 3/4” 8m 1” BSP M 3/4” BSP M 840 psi 36
48-VGL102510GO VGL 1” 10m 1” BSP F 1” BSP M 120 psi 36
48-BGL102525GO BGL 1” 25m 19mm 1” BSP M 140 psi 36
AIR WATER OIL GREASE DIESEL ADBLUE
Note: * High pressure hot wash. ** High flow, high temperature wash.

Notes
HEAD OFFICE
Unit 1, 21 Amour St Revesby NSW 2212
PO Box 333 Milperra NSW 2214
Ph: (02) 9914 8720 Fax: (02) 9914 8798
Email: jsgindustrial@jsg.com.au
Sydney | Melbourne | Perth | Brisbane | Adelaide | Townsville | Mackay | Indonesia
Every effort has been made to ensure all information and photographs contained in this publication were correct and accurate at time of printing, however no warranty is given in respect of this
publication and JSG Industrial Systems Pty Ltd (JSG) shall not be liable for any error therein. Technical information, specifications and products shown may be subject to change without prior
notice. Pictures shown are for illustration purposes only. WARNING: For sale and proper use consult instructions, the supplier or JSG. Contact your nearest JSG Distributor for latest information.
© 2016 JSG Industrial Systems Pty Ltd., All rights reserved. GL0316
www.jsgindustrial.com

JSG General Line Catalogue PDF

Uploaded by

Copyright:

Available Formats

JSG General Line Catalogue PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

JSG General Line Catalogue PDF

Uploaded by

Copyright:

Available Formats

JSG Industrial Systems

GENERAL LINE CATALOGUE 2016

quality industry solutions

equipment commenced as the automotive aftermarket supplier to the emerging

For all your 

They also represented Bradbury Hoists.

Today, JSG Industrial systems is proud to offer world class

This General Line catalogue offers products typically found in

Manual Grease Guns 6 Air Operated Diaphragm Pumps 39

Grease Gun Fittings & Accessories/ Single Point Water Meters 40

Pneumatic Piston Oil Pumps / Oil Pump Engine Diagnostic Equipment 54

4 JSG Industrial Systems | General Line Catalogue

PART NUMBER HEAD TYPE THREAD SIZE THREAD TYPE ORIENTATION

04-12LA165 Grease Nipple 6mm Metric 90°

04-12L161 Grease Nipple 6mm Metric Straight

04-12LA169 Grease Nipple 8mm Metric 90°

04-12L162 Grease Nipple 8mm Metric Straight

04-12LA204 Grease Nipple 10mm Metric 90° Grease Nipples - Pack of 10

04-12L028 Grease Nipple 1/8” NPT Straight

04-12LA043 Grease Nipple 1/8” NPT 90°

04-12L029 Grease Nipple 1/8” BSP Straight

04-12LA044 Grease Nipple 1/8” BSP 90°

04-12LA060 Grease Nipple 1/4” BSP 90°

04-12L048 Grease Nipple 1/4” BSP Straight

04-12LA059 Grease Nipple 1/4” NPT 90°

04-12L047 Grease Nipple 1/4” NPT Straight

04-12LT046 Button Head 1/8” BSP Straight

04-12LT326 Button Head 1/4” NPT Straight

04-12LT52 Button Head 1/4” BSP Straight

Trico Spectrum Grease Identification

Trico Grease Fitting Caps

YELLOW GREEN RED BLUE PURPLE ORANGE

07-37024 07-37025 07-37026 07-37027 07-37041 07-37058

Trico Grease Gun Bands

YELLOW GREEN RED BLUE PURPLE ORANGE

07-37036 07-37037 07-37038 07-37039 07-37044 07-37056

Trico Grease Gun Bands

Quality Industry Solutions | www.jsgindustrial.com 5

PART NUMBER CARTRIDGE PRODUCT DESCRIPTION

Clear Grease Guns and Grease Tubes

6 JSG Industrial Systems | General Line Catalogue

PART NUMBER PRODUCT DESCRIPTION

Single Point Lubricators

PART NUMBER CARTRIDGE SIZE PRODUCT DESCRIPTION

Note: for other specification refer to JSG sales personel

Quality Industry Solutions | www.jsgindustrial.com 7

PART NUMBER CARTRIDGE PRODUCT DESCRIPTION

8 JSG Industrial Systems | General Line Catalogue

PART NUMBER PRODUCT DESCRIPTION

01-G915A Lincoln Guardian 12V DC NiCaD Battery Battery to suit 01-G121AUS

01-001401 Lincoln 14.4V NiCaD Battery Suits 01-001442AUS and 01-001442E-400

01-001801 Lincoln 18V NiCaD Battery Suits 01-001842AUS and 01-001842E-400

01-001861 Lincoln 18V DC Li Ion Battery Li-ion Battery to suit 01-001862(AUS/E-400)

01-001871 Lincoln 20V DC Li Ion Battery Li Ion Battery to suit 01-001882(AUS/E-400)

Lincoln 20V DC Lincoln 20V DC Li Ion Lincoln 20V DC Li Ion

Quality Industry Solutions | www.jsgindustrial.com 9

Grease Pump Layout

Air Filter, Regulator,

Pneumatic Piston Grease Pumps

For all your