Technical Data Sheet Alucolor: Panel Manufacturer Dimensions
Technical Data Sheet Alucolor: Panel Manufacturer Dimensions
Technical Data Sheet Alucolor: Panel Manufacturer Dimensions
AluColor
Standard dimensions:
AluColor wood-based materials are always supplied in a symmetrical construction to prevent distortion
of the panels.
Properties:
AluColor
Mechanical Testing
Unit Class / value
properties standard
Abrasion 2E
DIN EN 68861 T2 Level Rotations
resistance >25 + <60 U
Scratch Level 4E 0.5 to
DIN EN 68861 T4
resistance N 1.0N
Level 7C
Dry heat DIN EN 68861 T7
°C 100°C
Level 8B
Moist heat DIN EN 68861 T8
°C 70°C
Grey scale 4
Light fastness EN 438-2
Blue scale 6
Pressure points
Blisters
Shade Minor variations in line with standard commercial tolerances may occur
as the result of irregularities in the coating papers and the type of carrier
used
Permitted variations:
White and light colours Delta E ! 0.5
Medium colours Delta E ! 0.8
Dark colours Delta E ! 1.5
Larger variations are permitted with metallic decors
Due to the differing shape and size of the metallic lacquer used, colour effects ranging from light to dark and
iridescent may occur depending on the angle of light and the angle of observation. This is part of the charm of
metallic decors, and does not constitute grounds for complaint.
Distance of observation and light source as per DIN EN 14323 in the current version!
The current versions of the relevant standards of guidelines for the particular materials will apply where
alternative criteria are not further specified!
Cleaning recommendations:
To clean the surfaces, you need nothing other than a soft cloth and warm water with a few drops of detergent or
glass cleaner. After cleaning, it is important to wipe dry with a soft cloth, preferably a microfibre cloth.
Stains, particularly those caused by strongly dyed substances and liquids, as well as splashes of fat etc., must
be removed with plenty of water, if necessary adding a quantity of ordinary, non-abrasive household cleaner.
After cleaning, remove any soap residue with lukewarm water and rub dry with a chamois leather. Stains should
not be allowed to dry. It may no longer be possible to remove dried-on substances or substances that have
been allowed to penetrate over a prolonged period of time.
Particularly stubborn stains can be removed using ordinary plastic cleaner or glass cleaner. Before applying, it is
advisable to test the cleaning product on a non-visible area first.
For this reason, do not apply any abrasives, furniture polish, floor wax, cellulose and synthetic-resin
thinners, acetone or similar cleaning products. Do not use steel wool or sponge scourers either!
Compound elements are usually supplied with foam sheets between the layers. Items are delivered on
disposable pallets. The finished stacks are wrapped in stretch film to protect them against dirt and moisture.
Over / under deliveries of 10% per item for technical reasons are permitted.
General information:
Compound materials are used in decorative interior design and furniture construction. Panels are to be used in
dry areas.
Careful checks of incoming goods are part of our excellent order processing sequence. They comply with the
Terms and Conditions of Niemann-Möbelteile. Compound panels must be transported and stored carefully. If
necessary, storage may be on a level, horizontal, dry base. In order to prevent the edges from swelling and the
panels from distorting in moisture, they should be stored in a closed building. The panels should not be stored at
temperatures under 15°C for long periods of time. This may result in irreversible damage (distortion) to the
compound. Relative humidity should be between 45 and 65%.
This information is based on our current knowledge, and is not intended to assure any properties.
It is for information purposes only, and is not intended to assure any particular product properties or suitability for a specific purpose. Users
are to ensure that our products are suitable for their particular application. This applies both for first-time samples of a product and for
changes to current products. As we have no influence over the various materials and processing conditions used by our suppliers, we are
unable to accept any responsibility for the information provided here. The recipients of our products are responsible for ensuring that current
legislation and definitions are observed. Subject to technical amendment.