SYLLABUSES

FOR
SECONDARY SCHOOLS

COMPUTER LITERACY
(SECONDARY 1-3)

PREPARED BY
THE CURRICULUM DEVELOPMENT COUNCIL
RECOMMENDED FOR USE IN SCHOOLS BY
THE EDUCATION DEPARTMENT
HONG KONG
1999
2
 CONTENTS
Page
PREAMBLE 5
1. INTRODUCTION 7
2. AIMS AND OBJECTIVES 8
3. SYLLABUS APPROACH AND 9-11
MODELS OF IMPLEMENTATION
4. ESTIMATED TIME ALLOCATION 12-15
5. NOTES ON TEACHING 16
6. THE SYLLABUS 17-47
7. MEMBERSHIP OF THE CDC COMPUTER 48-49
STUDIES SUBJECT COMMITTEE
(SECONDARY)

3
4
 PREAMBLE

This syllabus is one of a series prepared for use in secondary schools by the Curriculum
Development Council, Hong Kong. The Curriculum Development Council, together with its co-
ordinating committees and subject committees, is widely representative of the local educational
community, membership including heads of schools and practising teachers from government
and non-government schools, lecturers from tertiary institutions, officers of the Hong Kong
Examinations Authority and those of the Curriculum Development Institute, the Advisory
Inspectorate and other divisions of the Education Department. The membership of the Council
also includes parents and employers.

This syllabus is recommended for use in Secondary 1 to 3 by the Education Department.

Once the syllabus has been implemented, progress will be monitored by the Advisory
Inspectorate and the Curriculum Development Institute of the Education Department. This will
enable the Computer Studies Subject Committee (Secondary) of the Curriculum Development
Council to review the syllabus from time to time in the light of teaching and learning
experiences.

All comments and suggestions on the syllabus may be sent to:

Principal Curriculum Planning Officer (Secondary and Prevocational),

Curriculum Development Institute,
Education Department,
Wu Chung House, 13/F,
213 Queen’s Road East,
Wan Chai,
Hong Kong.

5
6
 1. INTRODUCTION

This syllabus is recommended for use in Hong Kong secondary schools at junior secondary
level. It is written with the understanding that contact with computers is now a daily fact of life
and that a general education curriculum should provide chances for students to learn about
computers, to become “computer literate” and to be better prepared for the fast changing
information society. This syllabus intends to build in students a general awareness of the ranges
of tasks that computers can do, how computers are used to solve daily-life problems, and to
what extent computers affect individuals and society.

This is a revised edition of the previous syllabus published in 1993. The revision is based
on the recommendation of the Joint Working Group (JWG) comprising members of the
Curriculum Development Council and the Hong Kong Examinations Authority Computer
Studies Subject Committees. The JWG was set up to carry out an overall review of the
syllabuses of computer subjects in secondary schools in October 1995 and to develop a set of
computer syllabuses for students of the 21st Century. Based on the evaluation reports of
computer subjects from various sources and the review on the current trend of computer
technology, new applications such as Internet access and multimedia are included in the
syllabus.

The revised syllabus adopts a modular approach. It is organized into 12 basic modules
which cover three major areas of study: computer systems, information technology, and
programming. 12 additional enrichment modules are also recommended in the course. Schools
may enhance their Computer Literacy curriculum by allocating additional teaching periods to
cover some or all of the enrichment module(s).

It is strongly recommended that the teaching of this syllabus should adopts a “task-
oriented” approach, in the sense that, students are given many practical tasks and features of the
applications system are then introduced gradually to help students to tackle the task. Many
practical tasks have been suggested to enable students to practise what they have learned. It is
hoped that teachers will follow the suggestions and provide opportunities for students to explore
and discover in a computing environment.

Bearing in mind that the subject Computer Literacy is intended to give students
opportunities to play around with computers and gain some hands-on experience in using
computers, teachers will be well aware that written examination may not be the most suitable
means of assessment. For this subject, it is recommended that continuous assessment be used
and grades, instead of marks, be awarded.

7
 2. AIMS AND OBJECTIVES

AIMS
This syllabus aims to provide students with an opportunity to:

1. develop computer literacy with an understanding of fundamental concepts of computers;

2. appreciate the contemporary development of information technology;

3. develop problem solving skills;

4. cultivate positive attitudes towards the ever changing society with widespread utilisation
of computers.

OBJECTIVES
After completion of the course, students should be able to:

1. understand common computing terminology;

2. understand the basic principles of operation for computer systems;

3. acquire fundamental knowledge about computer applications;

4. make use of common application software packages to carry out simple tasks;

5. understand basic features of a programming language;

6. write simple computer programs;

7. be aware of social issues related to computer applications;

8. appreciate the advancement brought about by the widespread use of computers in society.

8
 3. SYLLABUS APPROACH AND MODELS OF IMPLEMENTATION

The revised syllabus adopts a modular approach which cover three major areas of study
(with time allocation in percentages):

Computer Systems (25%)

Information Technology (58%)
Programming (17%)

Logo was designed as an integrated learning environment in which students could learn
important ideas in mathematics, computer science and problem solving while inventing and
carrying out their own computer- based programming projects. Hence, programming in Logo is
recommended in Computer Literacy. Modules PL01, PL02 and PL03 are included in the
modules. School may opt either Logo or any other computer language for teaching
programming. Alternative modules PA01, PA02 and PA03 are therefore suggested as substitutes
for the purpose.

Schools may provide more computer training to their students. Hence, two models of
implementation are recommended in the syllabus. Model I is a syllabus for schools wishing to
allocate one teaching period per week. The syllabus consists of 12 basic modules.

Model II is a more comprehensive course for schools wishing to allocate two teaching
periods per week. The syllabus consists of 24 modules, including 12 basic modules and 12
enrichment modules. For school taking 2 periods, they should complete 12 basic modules and
some enrichment modules. The ratio of topics mentioned above should be maintained. It is
highly recommended for schools to adopt Model II in implementing the syllabus.

9
 MODELS OF IMPLEMENTATION

Model I: 12 basic modules

Level Computer Systems Information Technology Programming

Secondary 1 CS01 Basics of Computer IT01 Areas of Computer PL01 Turtle Graphics
and Computer Applications
Operation

IT02 Text Processing and PA01*Working in the

Graphics Handling Programming
Environment

Secondary 2 CS02 Computer Hardware IT03 Calculations and PL02 Logo Procedures
and Software Charts

IT04 Multimedia PA02*Input/output

Presentation Statements and
Arithmetic
Operations

Secondary 3 CS03 Computers and IT05 Computer PL03 Simple Logo

Information Communications Programming
Systems and Internet Access

IT06 Using Databases PA03*Text and Sound

* Alternative modules on Programming

10
Model II: 12 basic modules and 12 enrichment modules

Level Computer Systems Information Technology Programming

Secondary 1 CS01 Basics of IT01 Areas of Computer PL01 Turtle Graphics
Computer and Applications
Computer PL02 Logo Procedures
Operation

CS11 Chinese IT11 Control Technology PA01*Working in the

Computing Programming
IT02 Text Processing and Environment
Graphics Handling
PA02*Input/output
IT12 Integration of Text Statements and
and Graphics Arithmetic Operations

Secondary 2 CS02 Computer IT03 Calculations and PL03 Variables

Hardware and Charts
Software PL11 Flow Control

CS12 Components of a IT13 Reporting with PA03* Text and Sound

Computer System Tables and Charts
PA11* Flow Control
IT04 Multimedia Techniques
Presentation

IT14 Presentation with

Animation
Secondary 3 CS03 Computers and IT05 Computer PL12 Circles, Drawing Arcs
Information Communications and Simple Tail
Systems and Internet Access Recursion

PL13 Logo Projects

CS13 Computer IT15 Employment and PA12* Looping Techniques

Networks Health Issues of and Random Number
Computer Usage Generator

IT06 Using Databases PA13* Simple Programming

Projects
IT16 Manipulating
Databases

* Alternative modules on Programming

11
 4. ESTIMATED TIME ALLOCATION

The time allocated for the Computer Literacy Course in schools adopting Model I should
be at least 35 minutes per lesson and 1 lesson per week. Taking an average school year as 26
teaching periods, a total of 78 periods should be allocated for this course.

The time allocated for the Computer Literacy Course in schools adopting Model II should
be at least 35 minutes per lesson and 2 lessons per week. Taking an average school year as 52
teaching periods, a total of 156 periods should be allocated for this course.

BASIC MODULES
No. of Periods
I. Computer Systems

CS01 Basics of Computer and Computer Operation 6-7

1. Computer concept
2. Idea of stored data and stored program
3. File management
4. Operating a computer

CS02 Computer Hardware and Software 6-7

1. Computer hardware
2. Computer software

CS03 Computers and Information Systems 6-7

1. Computer systems
2. Computer networking
3. Information processing
4. Future computers

II. Information Technology

IT01 Areas of Computer Applications 7-8

1. Education
2. Recreation
3. Business and office applications
4. Industrial and scientific applications
5. Effects of computers on society

IT02 Text Processing and Graphics Handling 7-8

1. Text processing
2. Graphics handling

IT03 Calculations and Charts 7-8

1. Introducing spreadsheets

12
 No. of Periods

2. Using a spreadsheet for calculations

3. Generating charts

IT04 Multimedia Presentation 7-8

1. Introducing multimedia
2. Developing multimedia presentation
3. Project with multimedia presentation

IT05 Computer Communications and Internet Access 7-8

1 Computer communications
2 Internet access
3 Impact of computer communications on society

IT06 Using Databases 7-8

1. Creating and using a database file
2. Manipulating a database file
3. Listing records

III. Programming

PL01 Turtle Graphics 4-5

1. Meeting the turtle
2. Screen and pen control

PL02 Logo Procedures 4-5

1. Repetitive actions
2. Defining and modifying procedures
3. Workspace and file management

PL03 Variables 4-5

1. Ideas of variables
2. Using variables
3. Random number primitive

Alternative Modules on Programming

PA01 Working in the Programming Environment 4-5

1. Introducing the working environment
2. Executing, saving and retrieving programs
3. Ideas of programming

PA02 Input/output Statements and Arithmetic Operations 4-5

1. Basic input/output techniques
2. Arithmetic operations

13
 No. of Periods

PA03 Text and Sound 4-5

1. Manipulating text
2. Screen control and sound

ENRICHMENT MODULES

I. Computer Systems

CS11 Chinese Computing 6-7

1. Basic concepts of Chinese character processing
2. Chinese character input methods
3. Inputting Chinese characters
4. Chinese computer systems

CS12 Components of a Computer System 6-7

1. Input/output units
2. Central processing unit
3. Storage unit

CS13 Computer Networks 6-7

1. Ideas of computer networks
2. Components of computer networks
3. Features of computer networks

II. Information Technology

IT11 Control Technology 7-8

1. Introducing control technology
2. Features of a control system
3. Project with control technology

IT12 Integration of Text and Graphics 7-8

1. Incorporating text into graphics
2. Incorporating graphics into text
3. Project with text and graphics

IT13 Reporting with Tables and Charts 7-8

1. Reporting with tables
2. Reporting with charts
3. Project with tables and charts

IT14 Presentation with Animation 7-8

1. Introducing animation
2. Capturing video images with a peripheral device

14
 No. of Periods

3. Importing animated/video images into another

software application

IT15 Employment and Health Issues of Computer Usage 7-8

1. Trend of employment caused by the widespread use of computers
2. Health issues related to the use of computers

IT16 Manipulating Databases 7-8

1. Linking two database files
2. Generating labels and reports
3. Project with databases

III. Programming

PL11 Flow Control 4-5

1. Ideas of flow control
2. Uses of flow control

PL12 Circles, Drawing Arcs and Simple Tail Recursion 4-5

1. Circles and drawing arcs
2. Simple tail recursion

PL13 Logo Projects 4-5

1. Designing a programming project
2. Project assignment

Alternative Modules on Programming

PA11 Flow Control Techniques 4-5

1. Ideas of flow control
2. Uses of flow control

PA12 Looping Techniques and Random Number Generator 4-5

1. Looping technique
2. Random numbers

PA13 Simple Programming Projects 4-5

1. Designing a programming project
2. Project assignment

15
 5. NOTES ON TEACHING

The three major areas of study in the revised syllabus together with their time allocation in
percentages are as follows:

Computer Systems (25%)

Information Technology (58%)
Programming (17%)

As the aim of the subject is to provide an opportunity for students to understand

fundamental concepts of computers, it should not be taught merely as transmission of
factual knowledge and the training of skills. Throughout the course, the main emphasis is
on the direct involvement of students in various activities such as viewing video tapes,
movies, slides and photographs, newspaper clippings, collection of relevant information
and materials, board display, small projects, visits, talks, group discussions, debates, essay
competitions, etc. These activities may help motivate students and enliven the learning
atmosphere in the classroom.

For teaching programming, teachers are recommended to adopt a student-centred

approach. The syntax and command of the language should be taught through the process
of guided discovery into the nature of a situation or problem. It is therefore essential for
teachers to provide their students with an environment which allow them to explore and
discover.

For teaching information technology, it is generally accepted that the understanding of

these topics could be best derived form hands-on experience in using application programs.
To achieve this goal, practical lessons should be appropriately organized so as to allow
sufficient time for students to try out the programs with relevant daily life tasks. However,
teachers should bear in mind that basic concepts involved in the use of application
packages to complete the tasks are the theme for this section. Students should not be
required to memorize the factual statements and commands used in the application
packages. Follow-up discussions on the contemporary development of information
technology are also considered valuable.

The order of presentation of topics in the models of this syllabus should not be
interpreted as a rigid teaching sequence. Teachers may choose modules that best suited to
the abilities of their student, but the proportion of time allocated to the major areas as
mentioned above should be maintained.

Based on feedback from teachers, notes on teaching on specific topic(s) would be up-dated
and issued from time to time in the form of supplementary information to schools in due course.

16
 6. THE SYLLABUS

CS01 Basics of Computer and Computer Operation

Module Objective
After completing the module, students should be able to understand fundamental
concept about computing and computer operation.

TOPICS EXPLANATORY NOTES

1. Computer concept By using daily life examples, teachers should lead

students to recognise that the computer is a machine
which operates according to the following sequence:
“input → process → output”

Teachers should also explain to students that computers

need instructions to operate. The distinction between
hardware and software and their interrelationship should
be discussed.

2. Idea of stored data and stored Students should be aware of the importance of stored
program data in a processing task.

By explaining the working of music box, washing

machine or toy robot, etc., teachers should introduce the
concept of program to students. Students should be
aware of the importance of the stored program in an
automated processing task.

3. File management Students should know the basic idea of directories and
sub-directories. Students should know how to save,
retrieve, copy and delete files.

4. Operating a computer Teachers should introduce the use of menus, icons and
windows.

Students should be familiarised with the operation of the

equipment with which they are working, such as
pointing devices. They should also be able to input
English and Chinese characters.

17
CS02 Computer Hardware and Software

Module Objective
After completing the module, students should be able to describe basic ideas of
hardware and software.

TOPICS EXPLANATORY NOTES

1. Computer hardware Teachers should use a microcomputer system to illustrate

the components of a computer, i.e., input unit, storage
unit, central processing unit and output unit.

Input Central Processing Output

Unit Unit Unit

Storage Unit

Only simple description of these components and their

interrelationship are required. The interconnections
between various units and the directions of data flow
between these units should be discussed.

Different types of input/output devices and storage

devices such as keyboard, mouse, printer, visual display
unit (VDU) and disk drives should be mentioned.

2. Computer software Basic ideas of different types of computer software such

as system software, programming languages and
application software should be discussed.

System software may include operating system and

Chinese operating system. Programming languages may
include Logo and BASIC.

Application software may include spreadsheets, word

processors, and database programs. Teachers may
demonstrate the use of these application software.

18
CS03 Computers and Information Systems

Module Objective
After completing the module, students should be able to understand the high worth of
the development of computer technology and the role of computers in information
processing.

TOPICS EXPLANATORY NOTES

1. Computer systems Types of computer systems such as supercomputer,

mainframe computer, minicomputer and microcomputer
should be discussed. Students should realize that the
classification of different types of computer systems are
relative to the advancement of technology.

2. Computer networking Students should realize that computers can be connected

to each other to form a network. The needs and
advantages of using computer networking should be
discussed.

3. Information processing Students should realize that :

(a) information is data which has been given specific
meaning;
(b) data processing involves the transformation of data
by means of a set of predefined rules;
(c) computers process data by performing calculation,
searching, sorting, deleting, inserting, updating, etc.;
(d) the correctness of data is essential in data processing
- the idea of “garbage-in garbage-out”;
(e) output of data processing should be useful
information.

Students may acquire hands-on experience on

(a) a real time system, for example, a simplified version
of telephone enquiry system;
(b) batch processing, for example, a simplified version
of an examination system.

4. Future computers Students should be aware that the role of computers in

various fields is getting more important. Teachers
should mention the current and future development of
computer technology.

19
IT01 Areas of Computer Applications

Module Objective
After completing the module, students should be able to list and identify various areas of
computer applications in the age of information.

TOPICS EXPLANATORY NOTES

1. Education The following topics should be covered:

(a) The computer as a teaching and learning tool
Students should be allowed to use computer assisted
learning (CAL) programs on different subject areas.
A discussion on their experiences gained from the
learning activities could be held. The advantages of
using CAL programs should be discussed.
(b) The computer as a school administrative tool
Computers may be used to keep student records,
class list, examination results, etc. Related computer
outputs may be shown to students.

2. Recreation Teachers should provide opportunities for students to

experience the feeling of challenge, fantasy and curiosity
which a computer game can give. Teachers may select an
appropriate computer game (e.g. action game) and let
students play with it. Students should also be aware that
computer equipment can be used to produce special
effects in movies.

3. Business and office The use of computers in business applications, such as

applications banks and supermarkets should be mentioned. Students
should be asked to collect printouts of these business
applications for discussion. Office automation (OA)
through use of the application software packages, such as
word processing, spreadsheet, database, graphics, and
communications should be mentioned.

4. Industrial and scientific The use of computers in industry, such as design and
applications manufacturing of cars, traffic control in Mass Transit
Railway (MTR) should be mentioned. The use of
computers in scientific applications, such as simulation of
experiments, weather forecasting and modelling should
be mentioned. In particular, teachers may demonstrate
programs on experiments simulated by computers.

20
5. Effects of computers on society Students should develop an awareness of the impact of
computers on society. The topics related to employment
trends and copyright should also be discussed.

21
IT02 Text Processing and Graphics Handling

Module Objective
After completing the module, students should be able to demonstrate basic skills in
processing text and handling graphics.

TOPICS EXPLANATORY NOTES

1. Text processing Students should be asked to type in a piece of text related

to their experiences, such as letters, diaries or stories. The
text will be saved, edited, formatted and printed.

When editing the text typed, students should be able to:

(a) add text at a desired insertion point;
(b) select desired blocks or sections of text;
(c) delete characters, words, lines and paragraphs;
(d) move or copy a block of text from one location to
another; and
(e) search for or replace a word in the text.

Students should be able to adjust the format typed

according to its appearance on paper, such as set margins
and justification of the text.

2. Graphics handling Students should be provided with opportunities to draw

colour pictures with figure of different shapes, such as
circles, squares and rectangles. They should be able to
move, copy, resize and delete these figures in the pictures.
Students should be able to save and print the pictures.

22
IT03 Calculations and Charts

Module Objective
After completing the module, students should be able to demonstrate simple skills in
manipulating and presenting numerical data by using spreadsheets.

TOPICS EXPLANATORY NOTES

1. Introducing spreadsheets Students should be introduced worksheets related to their

experiences, such as examination mark sheets and records
of personal monthly expenses. The advantages of using
electronic spreadsheets should be discussed.

2. Using a spreadsheet for Students should be able to set up a worksheet through:

calculations (a) entering text and numbers,
(b) entering formulas, and
(c) copying formulas.

Besides, students should be able to perform calculations

by using functions, such as sum, average, maximum and
minimum.

3. Generating charts Using the worksheets created, students should be able to

generate bar chart, pie chart and line chart with one set of
data.

23
IT04 Multimedia Presentation

Module Objective
After completing the module, students should be able to demonstrate basic skills in
developing multimedia presentation.

TOPICS EXPLANATORY NOTES

1. Introducing multimedia Students should be aware of the basic ideas of multimedia

presentation. The advantages of using multimedia
presentation should be discussed. Teachers should
introduce the use of multimedia in various areas of
applications, such as computer assisted learning,
electronic encyclopaedia and presentation graphics.

2. Developing multimedia Teachers should introduce how to prepare graphics files

presentation through scanning, sound files through recording and
animation files through using utility programs. Students
should be asked to incorporate a number of multimedia
elements, such as text, graphics, animation, sound and
music into a presentation.

3. Project with multimedia Teacher should prepare relevant files such as graphic
presentation files, sound files and animation files for students' use.
Students are encouraged to develop a multimedia
presentation project on topics related to their schools and
their family life.

24
IT05 Computer Communications and Internet Access

Module Objective
After completing the module, students should be able to understand fundamental
knowledge about computer communications and Internet access.

TOPICS EXPLANATORY NOTES

1. Computer communications Teachers should mention basic ideas of the applications

of computer communications, such as automatic teller
machine, electronic payment system, point of sale,
electronic money, electronic mail and Internet.

2. Internet access Student should be aware of basic ideas of the Internet and
the hardware and software requirement for Internet
access. They should have opportunities to exchange
information through electronic mails. Teachers should
guide their students to search for, access and download
useful information through the Internet.

3. Impact of computer Students should be aware of the impact of the

communications on society development of computer communications on society.
Debates on topics such as cashless society, data privacy
and data security may be held. Students may also be asked
to complete project assignments on these topics.

25
IT06 Using Databases

Module Objective
After completing the module, students should be able to demonstrate simple skills in
creating and manipulating databases.

TOPICS EXPLANATORY NOTES

1. Creating and using a Students should be aware of the basic concepts of

database file database, file, record, and field. Students should be able
to create and use a single database related to their
experience, such as file of student records or library book
records.

2. Manipulating a database file Students should be able to:

(a) save and retrieve a database file,
(b) display and edit records,
(c) add and delete records, and
(d) sort and search records.

3. Listing records Students should be able to display or print a list of

selected data, such as a list of records of all boys in a
class or geography books in library.

26
PL01 Turtle Graphics

Module Objective
After completing the module, students should be able to use fundamental Logo
primitives and draw simple graphics with turtle commands.

TOPICS EXPLANATORY NOTES

1. Meeting the turtle Students should be able to enter and exit the Logo
environment.

Teachers should provide simple procedures for students

to type into the computer to
(a) move the turtle and turn it through an angle,
(c) print picture to printer,
(d) do arithmetic,
(e) write sentence, and
(f) produce sound.

2. Screen and pen control Students should know how to control the turtle. Using the
primitives learned, the following shapes and patterns may
be constructed:

List of suggested Logo primitives or other related commands/methods for teaching this
module:
FD, BK, RT, LT, PRINTPIC, +, −, *, /, PR, TONE, GOODBYE, HOME, CS, CT, TS,
CLEAN, HT, ST, PU, PD, PE, SETPC, FILL, SETBG, and SETPOS.

27
PL02 Logo Procedures

Module Objective
After completing the module, students should be able to write simple Logo
procedures and manage procedures in the workspace.

TOPICS EXPLANATORY NOTES

1. Repetitive actions Students may be asked to use Logo primitives to draw

the following figures:

They may use the REPEAT primitive to shorten some of

the steps in drawing the above figures.

2. Defining and modifying Students should be aware that the body of a procedure
procedures may contain Logo primitives and other user-defined
procedures. They should use the Logo editor to modify a
defined procedure. The advantages of the use of user-
defined procedure should be discussed.

3. Workspace and file management Students should be able to use primitives to manage
procedures in workspace or disk files.

List of suggested Logo primitives for teaching this module:

REPEAT, TO, PO, POPS, POTS, ERASE, ERALL, CAT, ERASEFILE, LOAD, SAVE,
LOADPIC and SAVEPIC.

28
PL03 Variables

Module Objective
After completing the module, students should be able to use variables in writing
simple Logo procedures.

TOPICS EXPLANATORY NOTES

1. Ideas of variables Students are introduced to the concept of variables and
how variables are used in procedures.

For example:
TO SQ :SIZE
REPEAT 4[FD :SIZE RT 90]
END

2. Using variables The following shapes and patterns may be constructed:

Procedures involving basic arithmetic operations may be

constructed, for example:

TO AVERAGE :A :B
PRINT (:A + :B)/2
END

Procedures involving generation of sound may be

constructed, for example:

TO C :DURATION
TONE 523 :DURATION * 10
END

2. Random number primitive Teachers should provide examples for students to test
the primitive RANDOM and observe the result.

Students should be able to use the primitive in

procedures.

List of suggested Logo primitives for teaching this module:

29
:, TONE and RANDOM.

30
PA01 Working in the Programming Environment

Module Objective
After completing the module, students should be able to use fundamental program
statements in a programming environment.

TOPICS EXPLANATORY NOTES

1. Introducing the working Students should know how to enter and exit the
environment programming environment.

Program statements related to input (from keyboard),

output (to screen, printer and speaker) and arithmetic
operations should be introduced.

2. Executing, saving and retrieving Teachers should provide simple programs for students to
programs type into the computer, execute the programs, observe
results of the programs and produce the program listings.

Teachers should guide students to modify the programs

and then execute the programs again.

Students should save the programs for retrieval at a later

stage.

3. Ideas of programming Discussion on the ideas of writing programs to control

the computer should be held.

31
PA02 Input/Output Statements and Arithmetic Operations

Module Objective
After completing the module, students should be able to write simple programs to
handle assignments, input, output and arithmetic operations.

TOPICS EXPLANATORY NOTES

1. Basic input/output techniques Students should know how to use input/output features
in their programs: to accept input from keyboard and
output information to the screen. Students should be
encouraged to write simple programs with input/output
features.

For example,
i)

Hi, welcome to the Output

programming world. Screen

ii)

What is your name? Input

John Screen

Assign a variable to accept the

input and display messages with Process
the contents of the variable.

Hi, John. Output

Nice to meet you. Screen

32
2. Arithmetic operations Students should know how to use variables in
assignment tasks.

Teachers may use sample programs to demonstrate the

use of variables and simple arithmetic operators in
assignments.

For example,

Input value A?
3

Input
Input value B? Screens
4

Assign variables to accept

inputs and display messages Process
and the result.

The sum is Output

7 Screen

33
PA03 Text and Sound

Module Objective
After completing the module, students should be able to write simple programs to
manipulate text and sound.

TOPICS EXPLANATORY NOTES

1. Manipulating text Students should be able to use simple commands to

manipulate text strings.
For example,
(a) to output “SUPER” from the string
“SUPERMAN”,
(b) to output “BALL” from the string “BASEBALL”,
(c) to output “PUT” from the string “COMPUTER”
and
(d) to output “HK” from the string “HONG KONG”,
etc.

2. Screen control and sound Students should be able to write program with simple
layout to:
(a) position the text to any row or column on the
screen;
(b) display text of different attributes, e.g. foreground
and background colours;

Students should be able to use simple commands to

generate sound in the programming environment.

Students are encouraged to write simple programs to

manipulate and display text with interesting effects with
the use of colours and sound.

34
CS11 Chinese Computing

Module Objective
After completing the module, students should be able to understand the characteristics
of a Chinese computer system.

TOPICS EXPLANATORY NOTES

1. Basic concepts of Chinese The characteristics of Chinese characters should be

character processing discussed, such as:
(a) size of character set,
(b) internal code, and
(c) Chinese fonts.

2. Chinese character input Students should realize that the Chinese characters can be
methods inputted into the computer through the use of:
(a) keyboard entry,
(b) Chinese hand-writing recognition,
(c) Chinese optical character recognition, and
(d) Chinese speech recognition.

Teachers should demonstrate how to input Chinese

characters through keyboard with different methods, such
as Tsang-jei, simplified Tsang-jei, phonetic-based or
internal code input method.

3. Inputting Chinese characters Students should be encouraged to type a simple document

with a Chinese word processing package.

4. Chinese computer systems The need for Chinese computing systems should be
discussed. The need for constructing Chinese characters
should also be mentioned but the actual operation is not
required.

35
CS12 Components of a Computer System

Module Objective
After completing the module, students should be able to understand basic feature of
the components of a computer.

TOPICS EXPLANATORY NOTES

1. Input/output units The need for and functions of different input/output

devices should be discussed. Input devices may include
joystick, Chinese handwriting recognition system,
microphone and scanner. Output devices may include
colour printer, laser printer, colour monitor, liquid crystal
display panel, and speaker. Teachers’ demonstration on
the use of different types of input/output devices would be
helpful. The advantages and disadvantages of screen
and printer output in different situations should also be
mentioned.

2. Central processing unit The basic units of a central processing unit and their roles
should be discussed. These should include:
(a) control unit,
(b) arithmetic and logic unit.

Teachers should demonstrate how instructions are picked

up and executed sequentially by the central processing
unit. Students should be aware that all information are
stored and processed in binary codes.

3. Storage unit Students should realize that there are two types of storage:
main memory and backing store. The role of main
memory and its size in terms of bits and bytes should be
mentioned. The distinction between random access
memory (RAM) and read only memory (ROM) should be
discussed.

The need for secondary storage should be discussed.

Various storage devices such as disk drive and CD-ROM
drive and their corresponding media should be mentioned.

36
CS13 Computer Networks

Module Objective
After completing the module, students should be able to understand simple concept of
connecting computers together and realise the functions of a network.

TOPICS EXPLANATORY NOTES

1. Ideas of computer networks Basic ideas of two types of computer networks, local area
network (LAN) and wide area network (WAN) should be
discussed.

2. Components of computer Teachers should introduce basic components of a

networks computer network such as workstation, network interface
card, cabling, hub, server, router, and modem. Only
simple description of these components and their
interrelationship are required. Examples of LAN and
WAN are as follows:

A typical local area network (LAN) for school

administration.

A typical wide area network (WAN) for educational

organizations.

3. Features of computer networks The advantages of computer networks should be

discussed and demonstrated, such as, sharing of resources
and exchanging of information.

37
IT11 Control Technology

Module Objective
After completing the module, students should be able to gain knowledge about
control technology and appreciate its applications in the real world.

TOPICS EXPLANATORY NOTES

1. Introducing control technology Teachers should explain that a control system accepts
input signals and then generates output signals after
processing. Sources of input signals may include switch,
or sensors which are light, sound, temperature and touch
sensitive. Output signals may be used to control motors,
heaters, lamps and buzzers.

2. Features of a control system Students should be aware of the basic concepts of open
loop and closed loop control systems.

Teachers should introduce the use of control technology

in different applications, such as operation of air-
conditioner, iron and microwave oven. The need for
control technology should be discussed.

3. Projects with control Students may be asked to work with models which
technology simulate operations of systems in daily life situations,
such as traffic light control, light control, vending
machine and cooling fan.

38
IT12 Integration of Text and Graphics

Module Objective
After completing the module, students should be able to produce outputs with text
and graphics.

TOPICS EXPLANATORY NOTES

1. Incorporating text into Students should be able to add text into graphics and
graphics make designs related to their experiences, such as
birthday cards, posters and signs.

2. Incorporating graphics into Students should be able to:

text (a) insert graphics into a particular position of a
document;
(b) change the size of the graphics;
(c) change the position of graphics; and
(d) insert a graphic image with text surrounding.

3. Project with text and graphics Students may be asked to complete a project assignment
such as creating letterheads with logo, producing reports
with graphics for illustration or writing newsletters with
cliparts.

39
IT13 Reporting with Tables and Charts

Module Objective
After completing the module, students should be able to present numerical data by
using spreadsheets.

TOPICS EXPLANATORY NOTES

1. Reporting with tables Students should be able to generate tables according to a

format specified by teacher. Students should be able to
change row height, column width, font, alignment,
colours, border and shading, and format of date and
numbers.

2. Reporting with charts Students should be able to generate charts with two or
more sets of data. They should also be able to add axis
label, title and legend to charts.

3. Projects with tables and charts Students may be asked to complete a project assignment,
such as showing the monthly salaries of the male and
female staff of a company quarterly, sales in two
departments of a company, or average time spent on
doing homework on each day of a week by two classes
of students.

40
IT14 Presentation with Animation

Module Objective
After completing the module, students should be able to appreciate basic knowledge
and skills in the presentation of information through computer animation.

TOPICS EXPLANATORY NOTES

1. Introducing animation The idea of animation and the need for animation in
specific application areas should be discussed.

Teachers should show the use of computer animation in

computer assisted learning (CAL) packages and
commercial movies.

2. Capturing video images with a With the help of the demonstration system, teachers
peripheral device should capture video images from various sources, such
as a video cassette recorder (VCR) or a video camera. The
effects of resolution, number of colours, screen size and
frames per second should be discussed. Students should
be aware of the basic hardware and software requirements
for video capture.

3. Importing animated/video Teachers should prepare animation or video clippings.

images into another Ways to import these clippings into the word processing
application software package package are illustrated. Students may be encouraged to
incorporate one or more clipping(s) into their documents
for presentation.

41
IT15 Employment and Health Issues of Computer Usage

Module Objective
After completing the module, students should be able to understand employment and
health issues relating to the advancement of computer technology.

TOPICS EXPLANATORY NOTES

1. Trend of employment caused by the Students should be aware that the wide range
widespread use of computers of applications of computers has brought about
many career opportunities. Students should
also be aware that information technology may
displace human operation and lead to
unemployment. Jobs associated with the
computers such as computer operators,
programmers and systems analysts should be
discussed.

Students may be asked to gather information

on jobs in computing from the advertisements
in newspapers and magazines. The trend of
employment caused by the widespread use of
the computers should be discussed.

With the support of computers and on-line

databases, it has become feasible for people to
work at home. The pros and cons of this to the
employer and the worker should be discussed.
Students may be asked to produce a list of
careers which the work can be carried out at
home.

2. Health issues related to the use of Students should be aware of the potential
computers health hazard which may arise from frequent
use of keyboard and VDU. These may include
repetitive strain injury, eye strain and radiation
effect. Teachers should introduce the ways to
avoid the possible hazards to their health
caused by prolonged use of computers, for
example, taking regular breaks.

Students should be encouraged to collect

relevant information and materials from
newspaper and magazines.

42
IT16 Manipulating Databases

Module Objective
After completing the module, students should be able to link up two database files for
retrieving information from these databases.

TOPICS EXPLANATORY NOTES

1. Linking two database files Students should be able to link two different database
files by using database program. Students should
appreciate the need for linking files through examples
such as linking student database file and student extra-
curricula activity database file.

2. Generating labels and reports Students should be able to generate labels and reports
with different layouts.

3. Project with databases Students should be encouraged to complete a project

assignment by creating two database files and linking
them together. Then, students may also be encouraged to
generate useful labels and reports with information from
the databases.

43
PL11 Flow Control

Module Objective
After completing the module, students should be able to write Logo procedures with
relational and logical operators.

TOPICS EXPLANATORY NOTES

1. Ideas of flow control Relational operators (>, >=, <, <=, = and <>) and logical
operators (AND, OR and NOT) should be introduced.

Teachers may use daily examples to illustrate the use of

flow control commands. For example,
(a) In a school assessment system,
if MARK<50 then output "FAIL, you
should work hard."
if NOT MARK>=50 then output " FAIL,
you should work hard."
if MARK<0 OR MARK>100 then output
"The mark should be between 0 and 100."

(b) In a cinema’s booking office,

if AGE<18 AND LEVEL=3 then output
"Not allowed."

2. Uses of flow control Students should be able to use logical operators in writing
procedures. For example:
TO DECIDE :A
IF :A>5 [PR[NUMBER > 5][PR[NUMBER <=
5]]]
END

TO PICTURE
PR [PRESS 1 TO DRAW A SQUARE.]
IF RC="1 [SQUARE STOP]
PR [YOU SHOULD PRESS 1.]
END

List of suggested Logo primitives for teaching this module:

>, <, =, >=, <=, <>, NOT, AND, OR, RC, IF, STOP and REPEAT.

44
PL12 Circles, Drawing Arcs and Simple Tail Recursion

Module Objective
After completing the module, students should be able to use tail recursion
programming techniques to draw circles, arcs and other interesting patterns.

TOPICS EXPLANATORY NOTES

1. Circles and drawing arcs Students should be able to draw circles and arcs
of different radii by using Logo procedures.
The following shapes and patterns may be
constructed:

Students should use simple tail recursion to

2. Simple tail recursion
implement iteration, for example:

TO SPINSQ :SIZE :N
IF :N>18 [STOP]
REPEAT 4[FD :SIZE RT 90]
RT 20
SPINSQ :SIZE :N+1
END
The following shapes and patterns may be
constructed:

45
46
PL13 Logo Projects

Module Objective
After completing the module, students should be able to apply their knowledge of
Logo programming in the development of programming projects.

TOPICS EXPLANATORY NOTES

1. Designing a programming project A variety of projects may be assigned to

students. Before the students actually start
their projects, teachers should:
(a) explain clearly the nature of the
assignments, and
(b) analyze the assignments using modular
approach.

When designing and writing their procedures,

students should be encouraged to make full use
of primitives which they have learned.

2. Project assignment Students may be asked to complete an animation

project, for example, simulation of a single-
handed stopwatch.
Students may also be asked to complete other
projects. Some suggested topics are:
(a) game,
(b) pattern design,
(c) picture drawing,
(d) arithmetic quiz program, and
(e) an easy computer assisted learning
(CAL) program.

47
PA11 Flow Control Techniques

Module Objective
After completing the module, students should be able to write simple programs with
flow control techniques.

TOPICS EXPLANATORY NOTES

1. Ideas of flow control Relational operators (>, >=, <, <=, = and <>) and logical
operators (AND, OR and NOT) should be introduced.

Teachers may use daily examples to illustrate the use of

flow control commands. For example,

(a) In a school assessment system,

if MARK<50 then output "FAIL, you should work
hard."
if NOT MARK>=50 then output "FAIL, you should
work hard."
if MARK<0 OR MARK>100 then output "The
mark should be between 0 and 100."

(b) In a cinema’s booking office,

if AGE<18 AND LEVEL=3 then output "Not
allowed."

2. Uses of flow control Students should be encouraged to write simple programs

with flow control statements. For example,
(a) To decide the change of minute as seconds increment
to 60 of a digital clock,
(b) To decide the light signals of the traffic light system
from one state to another, and
(c) To decide the win situation of a STONE-PAPER-
SCISSORS game.

48
PA12 Looping Techniques and Random Number Generator

Module Objective
After completing the module, students should be able to write simple programs with
looping techniques and use random number generator in their programs.

TOPICS EXPLANATORY NOTES

1. Looping technique Teachers may use daily examples to illustrate the use of
looping. Students should write simple programs with
loops, for example
(a) a program which prints a sentence 100 times
repeatedly,
(b) a program which accepts a positive integer number
X and summing up values from 1 to X, and
(c) a program which simulates a digital clock, etc.

2. Random numbers Students should be able to print a set of integers using the
random number generator to observe the randomness of
the pattern.

Students may be asked to write simple programs to:

(a) simulate a dice, and
(b) generate arithmetic quiz.

49
PA13 Simple Programming Projects

Module Objective
After completing the module, students should be able to apply their knowledge of
programming in the development of programming projects.

TOPICS EXPLANATORY NOTES

1. Designing a programming project A variety of projects may be assigned to

students. Before the students actually start their
projects, teachers should:
(a) explain clearly the nature of the
assignments, and
(b) analyze the assignments using modular
approach.

When designing and writing their program

segments, students should be encouraged to
make full use of commands which they have
learned.

Students may be asked to complete an

2. Project assignment
interactive project, for example, a quiz on
simple arithmetic.

Students may also be asked to complete other

projects. Some suggested topics are:
(a) game,
(b) pattern design, and
(c) an easy computer assisted learning
(CAL) program.

50
 7. MEMBERSHIP OF THE CDC COMPUTER STUDIES
SUBJECT COMMITTEE (SECONDARY)

The membership since 1 September 1995 has been as follows:

Chairman Mr YIP Chee-tim (until 31 Aug. 1997)

Mr HO Lok-tin (from 1 Sep. 1997)

Vice Senior Inspector (Curriculum Development/Computer Education)1,

Chairman Curriculum Development Institute, Education Department
(Mr LEUNG Shiu-keung, until 1 Feb. 1998)
(Mr CHAN Hau-wing, from 2 Feb. 1998 to 14 May 1998)
(Mr CHAN Hing-lam, from 15 May 1998)

Ex-officio Senior Inspector (Computer Education),

Member Advisory Inspectorate Division, Education Department
(Mrs TANG Sabrina, until 31 Aug. 1996)
(Mr SIN Tak-wah, from 1 Sep. 1996 to 31 Aug. 1997)
Inspector (Computer Education)2
Advisory Inspectorate Division, Education Department
(Mr NG Siu-kai, from 1 Sep. 1997)

Members Dr CHANG Ming-yuen, Michael

(from 1 Sep. 1997)

Ms CHEUNG Fung-shan
(from 1 Sep. 1997)

Prof CHIN Yuk-lun, Francis

Mr HO Lok-tin
(until 31 Aug. 1997)

Dr HUNG Sheung-lun
(until 31 Aug. 1997)

Mr KONG Siu-cheung
(from 1 Sep. 1997)

51
 Mr KWAN Chi-wai, David
(from 1 Sep. 1997)

Mr LAU Kwok-kee
(until 31 Aug. 1997)

Mr LEUNG Ka-hung

Mr LEUNG Min-wing, Raymond

(until 31 Aug. 1997)

Mr LEE Yee-wing, Bobby

(from 8 Jul. 1998)

Mr LI She-chai
(until 31 Aug. 1997)

Mr LUK Chung-fun
(from 1 Sep. 1996 to 31 Aug. 1997)

Dr MOON Yiu-sang
(until 31 Aug. 1997)

Mr NG Yat-ming
(from 1 Sep. 1997)

Mr SIT Yung-wah

Mr TSANG Lai-keung
(from 1 Sep. 1997)

Mr TUNG Lai-sun
(until 7 Jul. 1998)

Secretary Curriculum Officer (Computer Education),

Curriculum Development Institute, Education Department
(Mr LUI Kam-ming)

52