CAMS 2018 - Advancing Materials and Manufacturing - November 27-29 - University of Wollongong, NSW, AUSTRALIA
CAMS 2018 - Advancing Materials and Manufacturing - November 27-29 - University of Wollongong, NSW, AUSTRALIA
CAMS 2018 - Advancing Materials and Manufacturing - November 27-29 - University of Wollongong, NSW, AUSTRALIA
8:30 OPENING OF CAMS 2018: HOPE THEATRE 8:30 OPENING OF CAMS 2018: HOPE THEATRE
9:00 PLENARY: PROFESSOR EMILY HILDER – HOPE THEATRE 9:00 PLENARY: PROFESSOR EMILY HILDER – HOPE THEATRE.
BLD 20 THEATRE 1 - RED THEATRE 2 - BROWN BLD 20 THEATRE 3 - YELLOW THEATRE 4 - GREEN THEATRE 5 - BLUE
ADDITIVE AND USE OF WASTE MATERIALS AND PHOTONICS, SENSORS, OPTOELECTRONICS MATERIALS SIMULATION CERAMICS AND
ADVANCED MANUFACTURING ENVIRONMENTAL REMEDIATION AND FERRO ELECTRICS AND MODELLING COMPOSITE MATERIALS
Chairs Ma Qian – 10:30 - 12:30 Pramod Koshy – 10:30 - 12:45 Ginu Rajan – 10:30 - 12:30 Greg Lumpkin / Andrew Gillen – 10:30 - 12:45 George Franks – 10:30 - 12:30
Oji Babatunde
Benjamin Fishburn Dr. Bashir Samsam Shariat
Corrosion Behavior of Aluminium 6063 Matrix
11:00 Development of Industrially-Viable Modelling and experimental evaluation of
Hybrid Composite Reinforced with Cassava
Invited: Dong Ruan Geopolymer Compositions. Invited: Dr. Alessio Stefani functionally graded shape memory alloys.
Peel Ash and Silicon Carbide.
Mechanical Response of Auxetic Structures Elastic optical fibres for sensing and smart
Fabricated by Additive Manufacturing. wearables. Rushabh Patel Kotaro Hattori
Michelle Yeoh
Deformation Behaviour of Porous PHBV Dry Sliding Wear Properties of BN/Ti and BN/
11:15 Development of K-Activator Based
Scaffold In Compression: A Finite Element Ti-6Al-4V Alloy Composites Prepared by Spark
Geopolymers Cured at Ambient Temperature.
Study. Plasma Sintering Process.
Wen Hao Kan Dr. Raymond Longbotton Alex Wong Yongmei Zhang
Guolin Yun
The role of defects and microstructure on Enhancing Utilisation of Steelplant By-Products Strain and Temperature Profile DEM Simulation of Surface Mechanical
12:00 Liquid Metal-Filled Magnetorheological
mechanical properties of AlSi10Mg fabricated by Characterisation of the Self-Sintering of BOS Measurements in Dental Resin Composites Attrition Treatment with Rough Surface
Elastomer.
by selective laser melting. Dust. using Chirped Fibre Bragg Grating Sonotrode.
ADDITIVE AND USE OF WASTE MATERIALS AND PHOTONICS, SENSORS, OPTOELECTRONICS METAL CASTING AND CERAMICS AND
ADVANCED MANUFACTURING ENVIRONMENTAL REMEDIATION AND FERRO ELECTRICS LIQUID METAL PRCESSING COMPOSITE MATERIALS
Chairs Graham Schaffer – 13:45 - 15:15 Wen-Fan Chen – 1:45 - 15:30 Chairs Agus Hatta – 13:45 - 15:15 Buyung Kosasih – 13:45 - 15:15 Lou Vance – 13:45 - 15:15
Oji Babatunde
Dr. Trevor Finlayson
Influence of Soda- Lime-Silica glass on porosity,
13:45 Deformation Studies of Mg-PSZ under
crystallization behavior and phase transformation
Keynote: Prof. Stephen Van Duin Invited: Dr. Rajesh Ramanathan Keynote: Prof. David St John Compressive and Tensile Loads.
of Ceramics produced from White Corn Cob Ash.
Research and development of Wire Arc Enzyme-mimic nanosensors: detection of The Formation of Eutectic Structures in Al-Si
Additive Manufactruing funded by DTMC. small molecules to whole cells. Alloys. Prof. George Franks
Dr. Wen-Fan Chen
14:00 Freeze Casting Dense Ceramics: Cracking the
Photocatalysts for Environmental Remediation.
Myth of the Crack Origin.
Syeda Mehreen
Yue Jiang
Elimination of Cu3Sn from the microstructure Richard Bowman
14:15 Photocatalytic Activity of Mo-doped TiO2/p-
Invited: Sumeet Walia of a Sn-10wt.%Cu alloy through the addition The Emperor’s New Floors.
Invited: Jeff Lang PVA Thin Films under Simulated UV light.
Black Phosphorus: An electronic and of Ni.
Industrial Scale Additive Manufacturing by
optoelectronic elemental analog of Charlotte Wong Md Sakinur Rahman
Titomic Kinetic FusionTM. Yicheng Zhang graphene. The Effect of Cooling Rate on the Challenges In Resourcing And Fabrication Of
14:30 Photocatalyic Activity of Tantalum Oxide
Solidification Microstructure of Mg-Al-RE High Thickness Super Duplex Stainless Steels –
Coatings Formed by Anodisation.
alloys. The Most Widely Used CRA For HPHT Services.
Eric Newby Amanda Chen Henry Kissick Dr. Suk-Chun Moon
Dr. Alan Hellier
Investigation of In-Situ Alloying Grade 23 Ti Effect of Mo + Cr Codoping Levels and Modelling and measurement of Assessment of Cracking Susceptibility of Steel in
14:45 Fracture Toughness of Cast and Extruded
with 3at.% and 5at.%Cu by Laser Based Powder Distribution on the Photocatalytic piezoelectric parameters for Mn-PMN-PZT Continuous Casting Process Employing High-
Al6061/15%Al2O3p Metal Matrix Composites.
Bed Fusion for Biomedical Applications. Performance of TiO2 Thin Films. relaxor ferroelectric disks. Temperature Laser-Scanning Confocal Microscopy.
Zile Ye
15:15 AFTERNOON TEA 15:15 AFTERNOON TEA UNTIL 15:45
Codoped Nanoceria for Catalytic Applications.
ADDITIVE AND ADVANCES IN MATERIALS PHOTONICS, SENSORS, OPTOELECTRONICS METAL CASTING AND
CORROSION AND DEGRADATION
ADVANCED MANUFACTURING CHARACTERISATION AND FERRO ELECTRICS LIQUID METAL PRCESSING
Chairs Yvonne Durandet – 15:45 - 17:45 Gwenelle Proust – 15:45 - 17:45 Chairs Judy Hart – 15:45 - 17:15 David St John – 15:45 - 17:45 Nick Birbilis / Hongtao Zhu – 15:45 - 17:45
18:00 POSTER SESSION – FOR MORE INFORMATION SEE PAGE 30 18:00 POSTER SESSION – FOR MORE INFORMATION SEE PAGE 30
9:00 PLENARY: PROFESSOR SHI XUE DOU – HOPE THEATRE 9:00 PLENARY: PROFESSOR SHI XUE DOU – HOPE THEATRE
BLD 20 THEATRE 1 - RED THEATRE 2 - BROWN BLD 20 THEATRE 3 - YELLOW THEATRE 4 - GREEN THEATRE 5 - BLUE
Chairs Graham Schaffer – 10:30 - 12:30 Magnus Garbrecht – 10:30 - 13:00 Xiaozxhou Liao – 10:30 - 12:30 Vitor Sencadas / Ling Yin – 10:30 - 12:30 Frank Barbaro – 10:30 - 12:30
Guang Zeng
10:30 Keynote: Assoc. Prof. Philip Nakashima Biocompatible Ti-Ta Structures through Cold
Keynote: Dr. Koji Kekehi Spray.
Measuring chemical bonding around defects Keynote: Prof. Simon Ringer Keynote: Prof. Setsuo Takaki
Microstructure and mechanical properties of
and nanostructures in metals and alloys using Atom Probe Crystallography: Enabling Effect of carbon and grain size on the yield
Ni-base superalloys fabricated by additive
quantitative convergent-beam electron Interface Engineering. Dr Ming Wu stress.
manufacturing.
10:45 diffraction. Wrinkle formation in polymeric drug
coatings.
Yuki Seto
Yi-Sheng Chen Work Hardening and Dislocation
12:00
Atom probe observation of hydrogen in steel. Accumulation Behavior in High Nitrogen
Keynote: Prof. Xinhua Wu Invited: Assoc. Prof. Qjaoliang Bao Austenitic Steel.
Metallurgical Issues and Quality Control in Photonic and Optoelectronic Device
Selective Laser Melting of Aerospace Materials. Applications Based on 2D Materials. Shohei Tanaka
Mechanical property of Medium-Mn steel
12:15
treated with interrupted quenching and
Invited: George F. Vander Voort intercritical annealing for short time.
Relooking at the evaluation of
Hardness Test Blocks. Dr. Andrii Kostryzhev
12:30 12:30 Warm deformation of microalloyed bainite
– higher properties at lower cost.
Carina Ledermueller
Design of hierarchical microstructures in a
LUNCH UNTIL 13:45 LUNCH UNTIL 13:45
modern HSLA steel via advanced thermo-
mechanical processing.
ADDITIVE AND ADVANCES IN MATERIALS NANOSTRUCTURED MATERIALS MATERIALS FOR ENERGY GENERATION, ADVANCES IN
ADVANCED MANUFACTURING CHARACTERISATION AND INTERFACES CONVERSION & STORAGE STEEL TECHNOLOGY
Chairs Yvonne Durandet – 13:45 - 15:15 Magnus Barbrecht – 1:45 - 15:15 Chairs Xianghai An – 13:45 - 15:15 Rachel Caruso – 13:45 - 15:00 Andrew Kostryzhev – 13:45 - 15:15
13:45
Keynote: Assoc. Prof. Gwenaelle Proust Invited: Prof. Shujun Zhang Invited: Dr. Debalay Chakrabarti
Keynote: Assoc. Prof. Martin Leary Invited: Prof. Maria Forsyth
Effects of surface mechanical attrition Impact of local structural heterogeneity on Combined effect of microstructure, particles
Bespoke Additive Manufacture: Low-Cost, Novel solid state electrolytes - enabling future
treatment on the microstructure and the piezoelectric properties of perovskite and crystallographic texture on the impact
High-Value Product Design. energy technologies.
properties of alloys. ferroelectrics. transition behaviour of low-C ferritic steels.
14:00
ADDITIVE AND ADVANCES IN MATERIALS NANOSTRUCTURED MATERIALS MATERIALS FOR ENERGY GENERATION, ADVANCES IN
ADVANCED MANUFACTURING CHARACTERISATION AND INTERFACES CONVERSION & STORAGE STEEL TECHNOLOGY
Chairs Yvonne Durandet – 15:45 - 17:45 Ahmed Saleh – 15:45 - 17:45 Zibin Chen – 15:45 - 17:00 Jiazhao Wang – 15:45 - 17:00 Chris Jones – 13:45 - 18:00
15:45
Keynote: Dr. Wyman Zhuang Invited: Prof. Tom Wu
Invited: Assoc. Prof. Turbadrakh Chuluunbat
Fatigue Performance of Additive Manufactured Keynote: Dr. Ross Marceau Heterostructure-Based “Binary Materials” for Invited: Prof. Udo Bach
Investigation of Fracture Initiation in Pipeline
Alloys: Challenges and Opportunities for APT studies of carbon-related materials. Photodetection from Mid-Infrared, Visible, to Back-Contact Perovskite Solar Cells.
Steel Using Acoustic Emission Monitoring.
Aerospace Applications. X-ray.
16:00
Alan Cen
16:15 Nanostructured Metal Oxides for
Invited: Dr. Magnus Garbrecht Supercapacitor Applications. Invited: Dr. Mayorkinos Papaelias
Invited: Prof. Tim Sercombe Invited: Dr. Daniel Sando
Aberration-corrected S/TEM methods as Online assessment of the structural integrity
Anti-bacterial Titanium produced using Tuning functional properties of BiFeO3 films
ultra-precise tools in materials characterisation Dr. Hanjuan Ren of railway crossings using high frequency
Selective Laser Melting. using strain and growth chemistry.
at the atomic scale. Manipulation of Charge Transport by Metallic acoustic emission sensors.
16:30
V13O16 Decorated on Bismuth Vanadate
Photoelectrochemical Catalyst.
Dr. Suk-Chun Moon
Dr. Alejandro Vargas-Uscategui Jeremy Kieruj Dr Liangzhi Kou Sajjad Mofarah
The Influence of Cooling Rate on the δ-to-γ
16:45 Cold spray additive manufacturing of titanium The influence of plasticity on crack-tip location Multiferronic coupling in two dimensional Novel Ultrathin Redox Pseudocapacitor
Phase Transformation in a Selected Ferritic
parts. using thermoelasticity. materials. CeO2-x for energy storage applications.
Stainless Steel.
Muhammad Hussain
Dr. Anders Eklund
Improved Heat Treatment to Prevent
17:30 Optimizing HIP and printing parameters for
Premature Weld Failure and Extend
EBM Ti-6Al-4V.
Component Life.
18:30 CONFERENCE DINNER - FOR MORE INFORMATION SEE PAGE 15 18:30 CONFERENCE DINNER - FOR MORE INFORMATION SEE PAGE 15
9:00 PANEL DISCUSSION – HOPE THEATRE 9:00 PANEL DISCUSSION “ADVANCED ADDITIVE MANUFACTURING + REMANUFACTURING” – HOPE THEATRE
BLD 20 THEATRE 1 - RED THEATRE 2 - BROWN BLD 20 THEATRE 3 - YELLOW THEATRE 4 - GREEN THEATRE 5 - BLUE
ADDITIVE AND SURFACES THIN FILMS NANOSTRUCTURED MATERIALS MATERIALS FOR ENERGY GENERATION,
LIGHT METALS DESIGN
ADVANCED MANUFACTURING AND COATINGS AND INTERFACES CONVERSION & STORAGE
Chairs Ma Qian – 10:30 - 12:30 Mingxing Zhang / Avi Bendavid – 10:30 - 12:45 Ying Chen – 10:30 - 12:30 Wenbin Luo – 10:30 - 13:00 Jian-Feng Nie – 10:30 - 12:45
10:30
Invited: Dr. Qinfen GU Keynote: Dr. Matthew Barnett
Keynote: Prof. Mingxing Zhang Keynote: Prof. Dmitri Goldberg
Keynote: Prof. Graham Schaffer Effective Gas Separation/Storage Some Challenges In Measuring And
New Approach to Wear-resistant Coating New Possibilities of Transmission Electron
Heuristics for the design of new materials. Performance Enhancement Obtained by Simulating Strength Due To Twinning In Mg
through Metal 3D Printing. Microscopy: in situ Studies.
Constructing Advanced Porous Materials. Alloys.
10:45
Bosi Huang
11:00 DFT study of various tungstates for
Invited: Dr. Dylan Agius Invited: Dr. Avi Bendavid Invited: Prof. Han Huang photocatalytic water splitting. Invited: Prof. Qiuming Peng
A Defect Analysis Tool to Map Fatigue Critical Surface Engineering Research at CSIRO Characterisation of interfacial forces of Achieving High Strength And High Ductility
Regions in AM Components. Manufacturing Business Unit. nanowires. Wenhan YI Of Ultrahigh Pressure Mg Alloys.
The structural and electronic properties of
11:15
doped BiVO4 related to photocatalytic water
splitting.
Pshtiwan Shakor
Imrana Kabir Dr. Suqin Zhu
Wettability, flowability and porosity in the
12:30 Effects of Substrate Contamination of Enhanced Plasticity In Structural Magnesium
inkjet 3DP for the gypsum and cement mortar
Photocatalytic TiO2 Thin Films. Alloys.
materials.
13:45
Invited: Dr. Yue Zhao
Invited: Prof. Ying Chen Invited: Adam Best Invited: Prof. Zhiqing Yang
Corrosion and biocompatibility of Ta and TaN
Boron Nitride Nanotube-Metal Composites From Lithium Metal Powder to High Energy Dislocations And Their Interaction With Other
films deposited on Ti6Al4V by cathodic arc
and Interface Reactions. Electrodes. Defects In Mg Alloys.
deposition.
14:00
15:45
Invited: Assoc. Prof. Huiliang Cao Invited: Prof. YuanTong Gu Invited: Prof. Keke Deng
Invited: Prof. John Andrews
Surface Modification of Biomaterials by Mechanical Characteristics of Diamond Dynamic recrystallization behavior of
Novel material and manufacturing
Plasma Immersion Ion Implantation and nanothread (DNT)--A new carbon nanotube fine-grained Mg matrix influenced by SiC
requirements of the proton battery..
Deposition. brother. particles.
16:00
Ghazaleh Bahmanrokh
Dr. Tao Wei Dr. Suqin Zhu
Use of Cerium Doping to Manipulate the Band
17:30 Development of ion and neutron irradiation Ion Beam Induced Formation of Face-
Position and Band Gap in Anatase TiO2 Thin
capabilities at ANSTO in structural materials. Centred Cubic Titanium.
Films.
Zenghao Wei
Jiangqi Zhu
Enhancing the photoelectrochemical
17:45 Characterization of plastically deformed
performance of zinc oxide thin films by defect
AlSi10Mg fabricated by selective laser melting.
26 engineering.