Inventor Completion Exam (Test)
Inventor Completion Exam (Test)
Inventor Completion Exam (Test)
COMPLETION
ONECAD VIET NAM
• Using Circular Pattern to create a feature pattern. In the Circular Pattern box, Select Bohrung1 for Feature and select Y axis for Rotation Axis.
• Enter 2 ul to specifies the number of occurrences in the pattern.
A) Mass = 0,250 kg
B) Mass = 0,251 kg
C) Mass = 0,252 kg
D) Mass = 0,253 kg
QUESTION 2:
Open Valve Spring.ipt
A) DO = 26,3 mm
B) DO = 26,2 mm
C) DO = 26,9 mm
D) DO = 27,0 mm
QUESTION 4:
Open Valve.ipt:
• Edit Sketch1, delete Line as shown above. Then edit feature Revolution1 with the edited sketch.
A) Mass = 0.002 kg
B) Mass = 0.003 kg
C) Mass = 0.004 kg
D) Mass = 0.005 kg
QUESTION 5:
Open Cylinder Liner.ipt:
A) Mass = 42.573 kg
B) Mass = 42.573 g
C) Mass = 43.573 kg
D) Mass = 43.573 g
QUESTION 6:
Open Rocker Arm.ipt:
A) X = 0,000 mm
B) X = -0.126 mm
C) X = 1.022 mm
D) X = -0.126 cm
QUESTION 7:
Open Revolution.ipt:
• Create a revolve, sellect sketch1 for Profile, sellect X axis for Axis. Extent between Work Plane1 and Work Plane2.
• Edit Dimension for Work Plane2 with angle 45 deg.
A) Mass = 0.272 kg
B) Mass = 0.273 kg
C) Mass = 0.274 kg
D) Mass = 0.275 kg
QUESTION 8:
Open Circlip_Din471_20x1_2.idw:
• Change the units precision of the dimension stype to two decimal places
QUESTION 10:
What features are used to orient the model by selecting a face you want to be parallel to the screen?
A) Pan
B) Orbit
C) Zoom
D) Look at
QUESTION 11:
How many ways to specify placement options and select hole geometry?
A) Linear, Concentric
B) From Sketch, On Point
C) From Sketch, Concentric, On Point
D) From Sketch, Concentric, On Point and Linear
QUESTION 12:
Open Zahnriemenscheibe.idw:
• Create a loft, select Sketch1 for first section and select Sketch2 for second sketch and select Sketch3 for third.
• Create a shell with thickness 1mm and remove faces (1) and (2).
What is the Minimum Distance between Zahnriemenscheibe (1) and Zahnriemenscheibe_gross (2)?
A) 1
B) 2
C) 3
D) 4