CS 1 - Hirarc
CS 1 - Hirarc
CS 1 - Hirarc
Pneumatics - Electro-pneumatics
www.smctraining.com • training@smctraining.com 46
Develop the SKILLS...
Analysis
Troubleshooting
Tech docum.
creation
Installation
and assembly
Operation
Programming
Programm.
Pneumatics Vacuum SENSORS Controllers
47
PNEUTRAINER-200
A fully modular and flexible system designed for the development of professional skills related to
pneumatics and electro-pneumatics.
Its flexibility makes PNEUTRAINER-200 equipment adaptable to all types of user requirements
and needs. It also makes a staggered investment over time possible.
Assembly panels
Industrial materials
www.smctraining.com • training@smctraining.com 48
Connections
The pneumatic components
include fittings for quick
connection for 4 mm tube. The
electro-pneumatics have 2 mm
test lead connections.
Storage
The standard kits include a storage system in EUROBOX containers with thermo-moulded trays
which allow perfect identification and storage whilst occupying minimum space.
These boxes and trays can also be purchased for the storage of customized kits.
Kits
PNEUTRAINER-200 has 6 standard sets of components defined for training demands at
different educational levels. Also, the user can configure personalised kits to meet their needs
or to complement a previous purchase.
Standard KITS
SAI2281 PNEU-201: Basic pneumatics set
SAI2282 PNEU-202: Advanced pneumatics set
SAI2283 PNEU-203: Basic electro-pneumatics set
SAI2284 PNEU-204: Advanced electro-pneumatics set
SAI2285 PNEU-205: Pneumatics- electro-pneumatics set
SAI2286 PNEU-206: Proportional pneumatics set
PNEUTRAINER-200
49
PNEUTRAINER-200
TECHNOLOGIES
@ eLEARNING-200
Find out more about the theory
Programm.
behind the technologies developed
Pneumatics Vacuum SENSORS Controllers in PNEUTRAINER-200 with our
eLEARNING-200 courses.
SKILLS
Analysis
Related eLEARNING-200
courses
Principles of pneumatics
(SMC-101)
Troubleshoot. Introduction to electricity
(SMC-102)
DC electricity (SMC-103)
AC electricity (SMC-104)
Designing
Solid state (SMC-105)
Sensors technology (SMC-108)
Tech docum.
*See eLEARNING-200 chapter for
creation more information
Installation
and assembly
Tech docum.
understanding
Operation
Programming
This shows how the PNEUTRAINER-200 is suitable to develop skills in the specific technology.
This shows that PNEUTRAINER-200 can help develop skills in the specific technology even though there are other
more appropriate products in the range.
www.smctraining.com • training@smctraining.com 50
PNEUTRAINER-200 - Extra equipment
There are other products in the range to complement PNEUTRAINER-200.
• VAC-200
The VAC-200 equipment is particularly designed to develop skills
related to vacuum technology.
*See VAC-200 chapter for more information.
• autoSIM-200
autoSIM-200 is software that can design and simulate
pneumatic, electro-pneumatic, hydraulic circuits, etc. It is also
used for programming them plus monitoring and control of
pre-defined 2D and 3D models.
*See autoSIM-200 chapter for more information.
PNEUTRAINER-200 - Configuration
Getting the right PNEUTRAINER-200 configuration is as easy as:
• Steps to follow
1.- Select the panel and the necessary extras.
51
PNEUTRAINER-200
PNEU KITS
Ref. Description 201 202 203 204 205 206
Air preparation
SAI2091 Air cleaning unit with 3/2 distribution valve 1 1 1 1 1 1
SAI2092 Distribution block 1 1 1 1 1 1
SAI2005 Pressure regulator with pressure gauge 1 1 1 1 1 1
SAI2004 1 MPa pressure gauge 1 2 1 1 1
SAI2032 Soft start-up valve 1
Manual - mechanical valves
SAI2015 3/2 NC valve, operated by push-button 2 2 2
SAI2017 Double 3/2 NC valve, operated by a push-button 1
SAI2018 3/2 NC/NO valve, operated by a push-button 1 1 1
SAI2019 3/2 NC valve, operated by an emergency knob 1 1 1
SAI2013.1 FC 3/2 NC valve, operated by roller lever 2 4 2
SAI2014.1 FC 3/2 NC valve. Operated by one-way roller lever 1 1 1
SAI2016 3/2 NC switch-operated double valve 1 1 1
SAI2109 5/2 valve driven by push-button 1
SAI2021 5/2 valve with 2-position selector 1 1 1
SAI2025 5/3 valve with selector 1
Air operated valves
SAI2020 3/2 NC/NO, air operated single valve 1 1 1
SAI2010 3/2 NC convertible valve 1 1 1
SAI2023 Air operated 5/2 single valve 1 1 1
SAI2024 Air operated 5/2 double valve 3 3 3
SAI2107 Block of 2 x 5/2 double valves + 1 x 5/2 single valve 1
Flow control equipment
SAI2007 “OR” function 1 1 1
SAI2124 Double “OR” valve 1 1 1
SAI2006 “AND” function 1 1 1
SAI2125 Double “AND” valve 1
SAI2031 Single direction speed controller (double) 2 2 2 2 2
SAI2033 Quick exhaust valve 1 1 1
SAI2008 Check valve 1
SAI2126 Speed controller with controlled check valve 2 2
SAI2030 Two-direction speed controller for single acting cylinder 1
Actuators
SAI2027 Single acting cylinder 1 1 1 1 1
SAI2026 Double acting cylinder with rubber cushion 2 2 2 2 2
SAI2071 Double acting cylinder with adjustable air cushion 1
SAI2118 Mechanically coupled rodless cylinder 1
SAI2123 Cylinder with load 1 1
SAI2120 Stroke reading cylinder 1
Pneumatics various
SAI2029 Vacuum ejector with pad 1 1
SAI2003 Pressure indicator (reed) 1
SAI2127 Pressure vessel 1 1
SAI2121 Pulse counter for reading cylinder 1
SAI2012 Pneumatic counter 1
www.smctraining.com • training@smctraining.com 52
PNEU KITS
Ref. Description 201 202 203 204 205 206
Solenoid valves
SAI2050 3/2 NC single solenoid valve 1 1 1
SAI2111 3/2 double solenoid valve 1
SAI2053 5/2 double solenoid valve 3 3 3
SAI2052 5/2 single solenoid valve 2 2 2
SAI2054 5/3 closed-centre solenoid valve 1
SAI2114 Block of 2 solenoid valves, 5/2 double + 1 single 1
Control modules
SAI2056 Power supply 1 1 1 1
SAI2035 ON/OFF switch 1
SAI2034 Emergency stop knob (electrical) 1
SAI2036 Set of electrical inputs (Button pad with 3 push-buttons) 1 1 1
SAI2038 Set of 3 relays 1 2 1
SAI2047 Indicators (pilots, buzzer) 1 1 1
SAI2040 Set of 2 timer relays 1
SAI2048 Electric counter 1
SAI2049 Electrical distributor 1 1 1
SAI2043 Reed auto switch 4 4 4
SAI2128 Solid state auto switch 2
SAI2044 Inductive detector 1
SAI2046 Capacitive detector 1
SAI2045 Photoelectric detector 1
SAI2042 Electrical end of stroke 2 2 2
P/V - V/P converters
SAI2041 Electrical contact pressure switch 1 1 1
SAI2095 Pressure switch, towards transistor 1
SAI2098 Pressure gauge with electrical contact 1 1 1
SAI2097 Programmable digital pressure switch. Analog / digital outputs 1 1
SAI2096 Vacuum pressure switch, towards transistor 1
SAI2099 Programmable proportional electro-pneumatic transducer 1
SAI2104 Analog pressure sensor 1
SAI2105 Digital Pressure Display for analog sensor 1
Accessories
SAI2057 Set of 20m of blue tubing and 20m of flexible 4 mm white tubing. 1 1 1 1 1 1
SAI2058 Set of 10 “T” fittings 1 1 1 1 1 1
SAI2059 Set of 5 plugs, 1/8” 1 1 1 1 1 1
SAI2060 Set of 10 x 4mm plastic plugs 1 1 1 1 1 1
SAI2132 Set of 10 “Y” fittings 1 1
SAI2055 Set of connection cables 1 1 1 1
TK-3 Tube-cutter 1 1 1 1 1 1
SAI2076 Box with trays for basic pneumatics composition 1
SAI2078 Box with trays for advanced pneumatics composition 1
SAI2077 Box with trays for basic electro-pneumatics composition 1
SAI2079 Box with trays for advanced electro-pneumatics composition 1
SAI2062 Box with trays for pneumatic-electropneumatic composition 1
SAI2602 Box with trays for proportional pneumatic composition 1
SAI2307 10 m. tube black. ø6mm 1 1 1 1 1 1
TG-1 Tube-extractor 1 1 1 1 1 1
Didactic supports
SAI2061 Set of manuals and documentation 1 1 1 1 1 1
SAI2070 CD-ROM, Pneumatic slides 1 1 1 1 1 1
! DON’T FORGET TO ADD AN ASSEMBLY PANEL AND EXTRAS
SAI2068 Schematic clip device SAI2028 Support bracket set
SAI2064 Vertical mounting panel for 2 work posts SAI2088 Silent compressor
SAI2074 Drawer unit for rolling table with lock SAI2080 Horizontal mounting panel
PNEUTRAINER-200
SAI2066 Drawer unit for rolling table without lock SAI2089 Cable holder fitting
SAI2065 Rolling table with twin-post
53
PNEUTRAINER-200
All the available pneumatic and electro-pneumatic components are described below, ordered
by category.
www.smctraining.com • training@smctraining.com 54
• Accessories
SAI2028 - Support bracket set
With non-slip legs, allowing the user to convert the horizontal mounting
panel into a vertical panel.
--Model ICO-P50
--Two-phase power supply: 230V.
--Flow rate: 50l/min.
--Maximum pressure: 0,8MPa
--Low noise level: 40dB
--Reservoir: 9 l.
--Weight: 21kg.
*Other models available on request.
55
PNEUTRAINER-200
Air preparation
www.smctraining.com • training@smctraining.com 56
SAI2005 - Pressure regulator with pressure gauge
--Operating pressure 0-0,1 MPa.
--Includes double-scale pressure gauge (Mpa and psi).
57
PNEUTRAINER-200
www.smctraining.com • training@smctraining.com 58
SAI2016 - 3/2 NC switch-operated double valve
--Includes 3/2 port valve with locking system.
59
PNEUTRAINER-200
www.smctraining.com • training@smctraining.com 60
Flow control equipment
SAI2007 - “OR” function
--Includes a single circuit selector with logic function “OR”.
61
PNEUTRAINER-200
Actuators
www.smctraining.com • training@smctraining.com 62
SAI2119 - Dual rod cylinder
--Stroke: 100mm.
--Rod with 4 support points on friction bushing.
--Speed 50 to 500mm/s.
--Rubber cushion.
--Includes 2 solid state magnetic sensors (D-Y7PL).
63
PNEUTRAINER-200
Pneumatics various
SAI2029 -Vacuum ejector with pad
--The unit has a vacuum ejector with pad,
ø32mm
--Built-in silencer.
www.smctraining.com • training@smctraining.com 64
Solenoid valves
65
PNEUTRAINER-200
Solenoid valves
www.smctraining.com • training@smctraining.com 66
Control modules
67
PNEUTRAINER-200
Control modules
www.smctraining.com • training@smctraining.com 68
SAI2046 - Capacitive detector
--Includes M18 capacitive detector.
--Detection distance: 8mm.
--Status display LED.
--Operating voltage: 24V.
69
PNEUTRAINER-200
www.smctraining.com • training@smctraining.com 70
SAI2099 - Programmable proportional electro-pneumatic transducer
--Proportional traslances, adjustable pressure and programmable.
--3-digit display gauge.
--Input code: 4-20mA.
--Analogic output signal: 1-5V.
71
PNEUTRAINER-200
Accessories
SAI2057 - Set of 20m of blue tubing and 20m of flexible 4 mm white tubing.
--Polyurethane tube, exterior diameter 4mm, two-tone colour, for connections
on pneumatic circuits.
TK-3 - Tube-cutter
--Tool for clean cuts, perpendicular to the length of the tube.
TG-1 - Tube-extractor
--Tool for an easy and quick extraction of the pipe (4 and 6mm).
www.smctraining.com • training@smctraining.com 72
Didactic support
SMC INTERNATIONAL TRAINING bases the design of its products on the model involving
“Development of Competence”, and so, in addition to its hardware resources, our company
offers a series of teachware supplements for comprehensive training in these disciplines, in
order to attain the skills described.
73