Syllabus Ou
Syllabus Ou
Syllabus Ou
------------------------------------------------
Scheme of Instruction
and
Syllabi of
1
SCHEME OF INSTRUCTION
BE (COMPUTER SCIENCE & ENGINEERING)
CSE: I - SEMESTER
Scheme of Scheme of
S.No Course Instruction Contact Examination
Course Title Credits
Code Hrs/Wk
L T P CIE SEE
Theory
1. MT 101 BS Engineering Mathematics-I 3 1 0 4 30 70 4
2. CH 102 BS Engineering Chemistry 3 1 0 4 30 70 4
3. EE 101 ES Basic Electrical Engineering 3 1 0 4 30 70 4
4. EG 101 HS English 3 1 0 4 30 70 2
Practicals
5 CH 152 BS Engineering Chemistry Lab 0 0 2 2 25 50 1.5
EE 151 ES Basic Electrical Engineering 1
6 0 0 2 2 25 50
Lab
7 EG 151 HS English Lab 0 0 2 2 25 50 1
Total 12 4 6 22 195 430 17.5
L : Lectures T : Tutorials
P : Practicals CIE : Continuous Internal Evaluation
SEE : Semester End Examination
2
With effect from the academic year 2018-2019
MT 101 BS
ENGINEERING MATHEMATICS – I
Course Objectives:
Course Outcomes:
The student will be able to :
find the nature of sequences and series
Expand functions as a Fourier Series.
use the knowledge of multiple integrals in finding the area and volume of any region bounded by
given curves
apply this knowledge to solve the curriculum problems
UNIT-I
Sequences and Series:
Sequences, Series, General properties of series, Series of positive terms, Comparison tests, tests of
Convergence D’Alembert’s ratio test, Cauchy’s nth root test, Raabe’s test, Logarithmic test, Alternating
series, Series of positive and negative terms, Absolute convergence and Conditional convergence ;
Fourier Series, Half range Sine and Cosine Series, Parseval’s theorem.
UNIT-II
Calculus of one variable:
Rolle’s theorem, Lagrange’s , Cauchy’s mean value theorems (without proof) Taylor’s series, Curvature,
Radius of curvature, Circle of curvature, Envelope of a family of curves, Evolutes and Involutes,
Evaluation of definite and improper integrals, Beta, Gamma and Error functions.
UNIT-III
Multivariable Calculus ( Differentiation):
Functions of two variables, Limits and continuity, Partial derivatives, Total differential and
differentiability, Derivatives of composite and implicit functions (Chain rule), Change of variables,
Jacobian , Higher order partial derivatives, Taylor’s series of functions of two variables, Maximum and
minimum values of functions two variables, Lagrange’s method of multipliers.
UNIT-IV
Multivariable Calculus ( Integration) :
Double integrals,Change of order of integration, Triple integrals, Change of variables in integrals and
applications-areas and volumes.
3
UNIT-V
Vector Calculus:
Scalar and vector fields, Gradient of a scalar field, Directional derivative, Divergence and Curl of a
vector field, Line, Surface and Volume integrals , Green’s theorem in a plane, Gauss’s divergence
theorem, Stoke’s theorem (without proofs) and their verification.
Suggested Readings:
1. R.K.Jain & S.R.K Iyengar, Advanced Engineering Mathematics, Narosa Publications,4th Edition
2014.
2. 2.Erwin Kreyszig, Advanced Engineering Mathematics, John Wiley, 9th Edition, , 2012.
3. B.S.Grewal, Higher Engineering Mathematics, Khanna Publications, 43rd Edition, 2014.
4. G.B.Thomas , Maurice Weir and Joel Hass, Thomas’ Calculus , Peterson, 12th Edition,2010.
5. B.V. Ramana, Higher Engineering Mathematics, 23rd reprint, 2015.
6. N.P.Bali and M. Goyal, A text book of Engineering Mathematics, Laxmi Publications 2010.
7. H.K. Dass, Er. Rajnish Varma, Higher Engineering Mathematics, Schand Technical Third Edition.
4
With effect from the academic year 2018-2019
CH 102 BS
ENGINEERING CHEMISTRY
Course Objectives:
To provide students with knowledge of engineering chemistry for building technical competence in
Industry, Research and Development in the following fields:
Thermodynamics and Electrochemistry
Water chemistry and Corrosion
Molecular Structure and Spectroscopy
Engineering Materials
Energy Sources and Nanomaterials
Course Outcomes:
The concepts developed in this course will help in quantification of several concepts in chemistry that
have been introduced at the 10+2 level. Technology is being increasingly based on the Electronic,
Atomic and Molecular level modifications. The course will enable the student to:
Analyze microscopic chemistry in terms of atomic, molecular orbital’s and intermolecular forces.
Rationalize bulk properties and processes using thermodynamic considerations.
Distinguish the ranges of electromagnetic spectrum used for exciting different molecular energy
levels in various spectroscopic techniques.
Gain knowledge in causes of corrosion and its prevention.
Attain knowledge about the disadvantages of hard water for domestic and industrial purposes.
Also learns the techniques of softening of hard water and treatment of water for drinking purpose.
UNIT-I
WATER CHEMISTRY AND CORROSION :
Water chemistry: Hardness of water-Types and units of hardness, estimation of temporary and
permanent hardness of water by EDTA method. Alkalinity of water and its determination. Water
softening by Ion exchange and Reverse Osmosis methods. Boiler troubles-scales and sludge’s formation-
causes, effects and prevention. Numerical problems
Specifications of potable water. Water treatment for drinking purpose-coagulation, sedimentation,
filtration, sterilization by Chlorination.
Corrosion-causes and its effects. Types of corrosion-Dry or Chemical corrosion and Wet or
Electrochemical corrosion and their mechanism. Electrochemical corrosion and its types. Factors
influencing rate of corrosion.
Corrosion control methods: Cathodic protection methods- Sacrificial anodic and Impressed current
cathodic protection methods. Surface coating methods: Hot dipping-Galvanizing and Tinning.
5
UNIT-II
THERMODYNAMICS AND ELECTROCHEMISTRY :
Thermodynamics: Definition of thermodynamic functions- Enthalpy, Entropy , Free energy and their
significance. Variation of free energy change with temperature and pressure. Concept of spontaneity.
Criteria of spontaneity in terms of entropy and free energy. Carnot cycle-efficiency of heat engine.
Numericals.
Electrochemistry: Electrochemical cells- Electrolytic and Galvanic cells-notation, cell reaction and cell
potentials. Types of electrodes-Calomel, Quinhydrone and Glass electrodes. Determination of PH of a
solution by using Quinhydrone electrode. Thermodynamics of emf of cells- Nernst equation and its
derivation. Application of Nernst equation to electrode potential and emf of cells. Numericals. Principles
and applications of Potentiometric titrations.
UNIT-III
MOLECULAR STRUCTURE AND SPECTROSCOPY :
Molecular Orbital Theory. Linear Combination of Atomic Orbitals(LCAO).Molecular Orbital energy
level diagrams of diatomic molecules-O2,N2 and NO. Crystal field theory, Crystal Field Splitting of d-
orbitals of transition metal complexes in Octahedral, Tetrahedral and Square planar geometries. Magnetic
properties of complexes.
Basic principles of Spectroscopy and selection rules of Vibrational, Rotational and Electronic
Spectroscopy and their applications.
UNIT-IV
ENGINEERING MATERIALS:
Polymers: Introduction. Classification of polymers -Plastics, Fibres and Elastomers.
Preparation, properties and engineering applications of the following polymers:
Plastics: PVC and Bakelite
Fibers: Nylon 6:6, and Dacron.
Elastomers: Buna-S and Butyl Rubber.
Conducting polymers: Introduction. Mechanism of conduction in polymers. Intrinsic conducting
polymers: Poly-acetylene and poly-aniline. Applications of conducting polymers.
Liquid Crystals: Introduction. Classification of liquid crystals. Thermotropic, Lyotropic liquid crystals.
Chemical constitution and liquid crystalline behavior. Nematic, Smectic and Cholestric liquid crystals
and their applications.
UNIT-V
ENERGY SOURCES AND NANOMATERIALS
Batteries: Primary batteries-Zn carbon battery. Secondary batteries-Pb- Acid battery and Ni-Cd battery.
Lithium-ion batteries- advantages and applications.
Fuel cells: Concept of fuel cells and their advantages. Construction and working of H2-O2 and methanol-
Oxygen fuel cells.
Solar cells: Concept of solar energy conversion, photovoltaic cells.
Nanomaterials: Introduction. Properties of nanomaterials. Synthesis of nanomaterials-Top down,
Bottom up approach and Sol-gel method. Applications of nanomaterials.
Suggested Readings:
1. Jain & Jain, Engineering chemistry, Dhanpat Rai publishing Co.,16th Edition.
2. B.L.Tembe,Kamaluddin and M.S.Krishnan, Engineering Chemistry(NPTELWeb-book)
3. Prashanth Rath, Engineering Chemistry, Cengage Learning.
4. M.J.Sienko and R.A.Plane, Chemistry: Principles and Applications, MGH Publishers.
5. B.H.Mahan, University Chemistry, Pearson Publishing Co., 4th Edition.
6. C.N. Banwell, Fundamentals of Molecular Spectroscopy, TMH
6
With effect from the academic year 2018-2019
EE 101 ES
Course Objectives:
To understand the fundamentals of DC and AC electrical circuits.
To understand the working principles of DC motor, DC generator, Transformers and single phase
induction motors.
To understand working principles of protection devices used in electrical circuits.
Course Outcomes:
The student will be able to :
Analyze the performance of simple electrical circuits exciting with Dc and AC excitations.
Apply different theorems to solve complicated electrical circuits to obtain the current, voltage and
power.
Understand the main components, Characteristics, applications of different DC and AC electrical
machines used in industry.
Understand the importance of protective devices and their rating used in electrical circuits.
.
UNIT-I : DC Circuits
Electrical circuit elements (R, L and C), voltage and current sources, Kirchoff current and
voltage laws, analysis of simple circuits with dc excitation. Superposition, Thevenin and
Norton Theorems.
7
UNIT-IV: Single-phase induction motor & DC Machines
Single-phase induction motor: Construction and principle of operation, Capacitor start & capacitor run
motor, applications
DC Generators: Dynamically induced emf, Flemming’s Right hand and Left hand rules, Construction
and principle of operation of DC generator, EMF equation, Types of DC Generators, OCC
characteristics, applications
DC Motors: principle of operation of DC Motor, Types of DC motors, applications
Suggested Reading:
1. J.B.Gupta, “Fundamentals of Electrical Engineering and Electronics” S.K.Kataria & Sons
Publications, 2002.
2. J.B.Gupta, “Utilization of Electric Power and Electric Traction” S.K.Kataria & Sons
Publications,2010
3. Abhijit Chakrabarti, Sudipta Nath, Chandan Kumar Chanda, “ Basic Elactrical Engineering” Tata
McGraw Hill, Publications,2009
4. Hughes, "Electrical Technology", VII Edition, International Student -on, Addison Welsey Longman
Inc.,1995.
8
With effect from the academic year 2018-2019
EG 101 HS
ENGLISH
Course Objectives:
communicate clearly, accurately and appropriately
learn different models of interpersonal communication
learn to communicate grammatically
learn to write essays, formal letters and technical reports
comprehend the different types of texts
Course Outcomes:
The student will be able to
communicate clearly, accurately and appropriately
learn different models of interpersonal communication
learn to communicate grammatically
learn to write essays, formal letters and technical reports
comprehend the different types of texts
UNIT – I
Effective Communication: Role and importance of communication; Features of human
communication; Process of communication; Barriers to communication; Oral and Written
Communication; Importance of listening, speaking, reading, and writing; Types of communication:
Verbal – formal versus informal communication, one-way versus two-way communication, Non-
verbal communication.
UNIT – II
Personality Development and Interpersonal Communication: Models of interpersonal
development: Johari window, Knapp's model; Styles of communication; Time management; Emotional
Quotient; Teamwork; Persuasion techniques.
UNIT – III
Remedial English: Tenses, Subject-verb agreement, Noun-pronoun agreement, Misplaced
modifiers, Articles, Prepositions, Redundancies, Clichés. (Note: The focus is on appropriate usage)
UNIT – IV
Vocabulary Building and Written Communication: Roots and affixes; Words often confused:
Homonyms, Homophones, Homographs; One-word substitutes; Idiomatic usage: Idioms, Phrases,
9
Phrasal Verbs; Synonyms; Antonyms; Paragraph writing; Précis writing; Essay writing; Official letters;
E-mail etiquette; Technical report writing: Feasibility and Progress reports.
UNIT – V
Reading Comprehension: Unseen Passages, A.P.J. Abdul Kalam, Azim Premji, Sachin Tendulkar,
Sathya Nadella, Sam Pitroda (Note: No descriptive questions to be set from this unit and only Reading
Comprehension/s from unseen passages should be set in the Examination Question Papers)
Suggested Readings:
10
With effect from the academic year 2018-2019
CH 152 BS
Course Objectives:
Estimation of hardness and chloride content in water to check its suitability for drinking purpose.
To determine the rate constant of reactions from concentrations as an function of time.
The measurement of physical properties like surface tension and viscosity.
Estimation of HCl and CH3COOH by conductometric technique
Laboratory out comes:
The chemistry laboratory course use consists of experiments illustrating the principle of
chemistry relevant to the study of science and engineering.
The student will be able to:
Estimate rate constants of reactions from concentration of reactants / products as a function of
time.
Measure molecular /system properties such as surface tension ,viscosity ,conductance of solutions
,redox potentials and chloride content of water
Synthesize a small drug molecules
Water analysis:
1) Determination of total hardness of water by EDTA method
2) Determination of Chloride content of water
Conductance measurements:
3) Determination of cell constant.
4) Estimation of HCl and CH3COOH by conductometric titration
Potentiometric measurements:
5). Estimation of HCl by potentiometric titration.
6). Estimation of ferrous iron by potentiometric titration.
Kinetic Studies:
7).Determination of rate constant of acid catalyzed hydrolysis of methyl acetate.
8).Study of kinetics of Iodine-Clock reaction.
Synthesis of a drug molecule:
9).Synthesis of Aspirin.
Distribution Studies:
10).Determination of partition coefficient of acetic acid between Butanol and Water.
Physical constants:
11).Determination of a viscosity of a given liquid.
12).Determination of surface tension of a given liquid.
11
Colorimetry:
13) Verification of Beers law and Estimation of the given permanganate.
14) Verification of Beers law and Estimation of the given CuSO4.
Suggested Readings:
12
With effect from the academic year 2018-2019
EE 151 ES
Dem 1. Basic safety and precautions - Introduction and use of measuring instruments
Exp 1. Verification of Kirchhoff’s Laws
Exp 2. Verification of Thevenin’s & Norton’s Theorem
Exp 3. Steady- state and transient time-response of R-C circuit to a step change in voltage.
Exp 4. Sinusoidal steady state response of R-L and R-L-C circuits- impedance calculation
and verification
Exp 5. Measurement of three-phase power in balanced three-phase circuits using
Two-Wattmeter method
Suggested Reading:
1. J.B.Gupta, “Fundamentals of Electrical Engineering and Electronics” S.K.Kataria & Sons
Publications, 2002.
2. J.B.Gupta, “Utilization of Electric Power and Electric Traction” S.K.Kataria & Sons
Publications,2010
3. Abhijit Chakrabarti, Sudipta Nath, Chandan Kumar Chanda, “ Basic Elactrical Engineering” Tata
McGraw Hill, Publications,2009
4. Hughes, "Electrical Technology", VII Edition, International Student -on, Addison Welsey Longman
Inc.,1995.
13
With effect from the academic year 2018-2019
EG 151 HS
ENGLISH LABORATORY
Course Objectives:
learn IPA
learn minimal pairs and types of syllables
overcome the difficulties with sounds of English
learn to participate well in GDs, Debates and Presentations
communicate with appropriate body language and expressions
Course Outcomes:
The student will be able to
learn IPA
learn minimal pairs and types of syllables
overcome the difficulties with sounds of English
learn to participate well in GDs, Debates and Presentations
communicate with appropriate body language, expressions
Suggested Readings:
1. E. Suresh Kumar. A Handbook for English Language Laboratories (with CD).
Revised edition, Cambridge University Press India Pvt. Ltd. 2014
2. T. Balasubramanian. A Textbook of English Phonetics for Indian Students.
Macmillan, 2008.
3. J. Sethi et al., A Practical Course in English Pronunciation (with CD). Prentice
Hall of India, 2005.
4. Hari Mohan Prasad. How to Prepare for Group Discussions and Interviews. Tata McGraw Hill,
2006.
14
SCHEME OF INSTRUCTION
B.E. (CSE)
II - SEMESTER
Scheme of Scheme of
S.
Instruction Contact Examination
No Course Code Course Title Credits
hr/week
.
L T P CIE SEE
Theory
1 3 1 0 4 30 70 4
MT 201 BS Engineering Mathematics-II
Practicals
4 PH 251 BS Applied Physics Laboratory
0 0 3 3 25 50 1.5
L : Lectures T : Tutorials
P : Practicals CIE : Continuous Internal Evaluation
SEE : Semester End Examination BSC : Basic Science Courses
ESC : Engineering Science Courses
HSM : Humanities, Social Sciences & Management Courses
15
With effect from the academic year 2018-2019
MT 201 BS
ENGINEERING MATHEMATICS – II
Course Objectives:
To study matrix algebra and its use in solving system of linear equations and in solving eigen
value problems
To provide an overview of ordinary differential equations
To study special functions like Legendre and Bessel functions
To introduce the concept of functions of complex variable and their properties
Course Outcomes:
The student will be able to
solve system of linear equations and eigen value problems
solve certain first order and higher order differential equations
determine the analyticity of complex functions and expand functions as Taylor and Laurent series
evaluate complex and real integrals using residue theorem
UNIT-I
Matrices :
Elementary row and column operations, Rank of a matrix, Echelon form, System of linear equations,
Linearly dependence and independence of vectors, Linear transformation,Orthogonal transformation,
Eigenvalues, Eigenvectors, Properties of eigenvalues , Cayley-Hamilton theorem, Quadratic forms,
Diagonalization of Matrices, Reduction of quadratic form to canonical form by orthogonal
transformation , Nature of quadratic forms.
UNIT-II
First Order Ordinary Differential Equations :
Exact first order differential equations , Integrating factors, Linear first order equations , Bernoulli’s ,
Riccati’s and Clairaut’s differential equations ,Orthogonal trajectories of a given family of curves.
UNIT-III
Differential Equations of Higher Orders :
Linear independence and dependence, Solutions of second and higher order linear homogeneous
equations with constants coefficients, Method of reduction of order for the linear homogeneous second
order differential equations with variable coefficients , Solutions of non-homogeneous linear differential
equations, Method of variation of parameters, solution of Euler-Cauchy equation, Simultaneous linear
differential equations, Power Series
solution, Legendre Polynomial of first kind, Bessel’s function of first kind and their properties.
16
UNIT-IV
Functions of a Complex Variable:
Limits and continuity of a function, differentiability and analyticity, Elementary Analytic functions,
Necessary and Sufficient conditions for a function to be analytic,Cauchy- Riemann equations in polar
form, harmonic functions, complex integration, Cauchy’s integral theorem, extension of Cauchy’s
integral theorem for multiply connected regions, Cauchy’s integral formula,Cauchy’s inequality,
Cauchy’s formula for derivatives, Liouville’s theorem, Maximum Modulus principle (without proof)and
its applications
UNIT-V
Residue Calculus:
Power series, Taylor’s series, Laurent’s series, zeros and singularities, residues, residue theorem,
evaluation of real integrals using residue theorem, Argument principle, Rouche’s Theorem and their
applications, conformal mapping Bilinear transformations. (All Theorems without Proof)
Suggested Readings:
17
With effect from the academic year 2018-2019
PH 201 BS
Applied Physics
Instruction 4 Periods per week
Duration of University Examination 3 Hours
University Examination 70 Marks
Sessionals 30 Marks
Credits 4
Course Objectives:
To make student understand the basic concepts of wave mechanics and to know the
significance of Maxwell’s equations in engineering applications.
To state the principle of optical fiber and to understand the design and applications of
optical fibers. To explain the principles of laser and to demonstrate the applications of
laser. To understand the concept of ultrasonics and its wide applications.
To study different types of dielectric polarizations and dielectric properties of materials.
To understand the concept of semiconductors and its wide applications.
To make student understand the basic concepts of superconductivity. To know the
significance of magnetic materials in normal life.
To study the preparation of thin films and their importance. To understand the basic
concepts of nanomaterials.
Course Outcomes:
The student will be able to:
Solve engineering problems using the concepts of wave and particle nature of radiant
energy. Explain the significance of electromagnetic waves.
Compile the applications of laser and fiber optics in the field of industry, medical and
telecommunication.
Show their understanding about the conductivity nature of semiconductors and its wide
applications. Demonstrate the knowledge in dielectric materials applications and its
importance.
Apply the basic concepts of superconductivity and magnetic materials in engineering
applications.
Understand the widely used current technologies such as solar cells, fire alarms etc., which
are based on thin films. Explain about the importance of nanomaterials.
UNIT-I
18
UNIT – II
Fibre Optics: Introduction – Propagation of light through an optical fiber - Acceptance angle -
Numerical aperture (NA)– Types of optical fibers and refractive index profiles – Fibre drawing
process (double crucible method)- Application of optical fibers
Lasers: Characteristics of lasers - Spontaneous and stimulated emission of radiation - Einstein’s
coefficients - Population inversion - Ruby laser - Helium-Neon laser – Semiconductor laser –
Applications of lasers.
Ultrasonics: Introduction to Ultrasonic waves – Production of ultrasonic waves by Piezoelectric
method – Detection of ultrasonic waves : Piezoelectric detector – Properties of Ultrasonics –
Wavelength of Ultrasonics by Debye-Sears method – Applications.
UNIT- III
Semiconductors: Intrinsic and Extrinsic semiconductors - Concept of a hole - Carrier concentration
and conductivity in intrinsic semiconductors – Formation of P-N junction diode and its I-V
characteristics – Thermistor and its characteristics - Hall effect and its applications.
Dielectric Materials: Dielectrics - Types of polarizations – Electronic, Ionic, Orientational and
Space charge polarizations – Expression for Electronic polarizability - Frequency and temperature
dependence of dielectric polarizations - Determination of dielectric constant by capacitance Bridge
method - Ferro electricity - Barium titanate - Applications of Ferroelectrics.
UNIT- IV
UNIT-V
Thin films: Distinction between bulk and thin films - Thin film preparation techniques: Thermal
evaporation methods, Electron beam evaporation – Construction and working of Solar cell –
Applications.
Nanomaterials: Introduction - Properties of materials at reduced size - Surface to volume ratio at
nano scale – Classification of nanomaterials - Preparation of nanomaterials: bottom–up methods (sol
gel and CVD), Top-down methods (ball milling) - Basic ideas of carbon nanotubes – Applications
nanomaterials and their health hazards.
Suggested Reading:
19
With effect from the Academic Year 2018 – 2019
CS 201 ES
PROGRAMMING FOR PROBLEM SOLVING
Course Objectives:
* To introduce the basic concepts of Computing environment, number systems and flowcharts
* To familiarize the basic constructs of C language – data types , operators and
expressions
* To understand modular and structured programming constructs in C
* To learn the usage of structured data types and memory management using pointers
* To learn the concepts of data handling using files
Course Outcomes:
Student will be able to :
* Explain various functional components in computing environment
* Develop algorithmic solutions to problems and draw the flow charts
* Explain and use basic constructs of C in writing simple programs
* Use standard library functions in C and develop modular programs using user defined functions
and structured data types
UNIT – I
UNIT-II
Conditional Control Statements: Bitwise Operators, Relational and Logical Operators, If, If-Else,
Switch-Statement and Examples. Loop Control Statements: For, While, Do-While and Examples.
Continue, Break and Goto statements
20
UNIT – III
UNIT - IV
UNIT - V
Input and Output: Introduction to Files, Modes of Files, Streams, Standard Library
Input/Output Functions, Character Input/Output Functions.
Suggested Reading:
1. B.A. Forouzan and R.F. Gilberg, “A Structured Programming Approach in C” , Cengage Learning,
2007
2. Kernighan BW and Ritchie DM, “The C Programming Language”, 2nd Edition, Prentice Hall of
India, 2006.
3. Rajaraman V, “The Fundamentals of Computer”, 4th Edition, Prentice-Hall of India, 2006.
4. Dromey How to Solve it By Computer , Pearson education, 2006
21
With effect from the Academic Year 2018 – 2019
PH 251 BS
Applied Physics Laboratory
Course Outcomes:
Student will be able to :
Recognize the correct number of significant figures in a measurement or in the results of a
computation.
Use a best fit to create a graph from a series of data points. Students can extrapolate and
interpolate.
Keep a lab notebook that documents their experience in each lab procedure.
Develop skills to impart practical knowledge in real time solution and learn to design new
instruments with practical knowledge.
List of Experiments:
1. To calculate the Numerical aperture (NA), acceptance angle of a given optical fibre.
2. Determination of wavelength of LASER using diffraction grating.
3. Determination of Velocity of ultrasonic waves in a liquid by Debye-Sears method.
4. To draw the I-V Characteristics of P-N Junction diode and to evaluate the value of potential
barrier of the diode.
5. Determination of carrier concentration, Mobility and Hall Coefficient of Ge Crystal using Hall
Effect Experiment.
6. To draw the curve between the magnetizing field and the intensity of magnetization of the
specimen (soft iron rod) and to find out i) Coercivity ii) Retentivity and iii) Hysteresis loss.
7. To draw the I-V Characteristics of a solar cell and to calculate the i) Fill factor ii) Efficiency and
iii) Series resistance.
8. To find the values of Electrical conductivity and energy gap of Ge crystal by Four probe method.
9. To determine the Dielectric constant and Phase transition temperature of Lead Zirconium Titanate
(PZT).
10. To determine the constants of A, B and α using Thermistor characteristics.
22
With effect from the Academic Year 2018 – 2019
CE 151 ES
Engineering Graphics
Instruction 6 Periods per week
Duration of University Examination 3 Hours
University Examination 50 Marks
Sessionals 50 Marks
Credits 3
Course Objectives
Introduction to engineering design and its place in society
Exposure to the visual aspects of engineering design
Exposure to engineering graphics standards
Exposure to solid modelling
Course Outcomes:
Student will be able to :
Create working drawings
Communicate through drawings
Create standard solid sections by drawing
UNIT - I: Overview of Computer Graphics: listing the computer technologies that impact on graphical
communication, Demonstrating knowledge of the theory of CAD software, Setting up of units and
drawing limits; ISO and ANSI standards for coordinate dimensioning, Snap to objects manually and
automatically; Producing drawings by using various coordinate input entry methods to draw straight
lines, Applying various ways of drawing circles.
UNIT-II: Commands: Initial settings, Drawing aids, Drawing basic entities, Modify commands, Layers,
Text and Dimensioning, Blocks Applying dimensions to objects, applying annotations to drawings;
Setting up and use of Layers, Create, edit and use customized layers; Changing line lengths through
modifying existing lines (extend/lengthen); Printing documents to paper using the print command.
UNIT-IV: Scales : Reduced and Enlarged scales, representative fraction, Plain, Diagonal and Vernier
Scales, Projections of Points – placed in different quadrants, Projection of straight lines parallel to one
plane, perpendicular to one plane, inclined to one plane and lines inclined to both planes.
23
UNIT-V: Projections of planes : inclined Planes - Auxiliary Planes, Projections of Regular Solids
covering, those inclined to both the Planes.
Sections and Sectional Views of Right Angular Solids: Prism, Cylinder, Pyramid, Cone – Auxiliary
Views; Development of surfaces of Right Regular Solids - Prism, Pyramid, Cylinder and Cone.
Suggested Reading:
1. Bhatt N.D., Panchal V.M. & Ingle P.R., (2014), Engineering Drawing, Charotar Publishing House
2. 2. Shah, M.B. & Rana B.C. (2008), Engineering Drawing and Computer Graphics, Pearson Education
3. Agrawal B. & Agrawal C. M. (2012), Engineering Graphics, TMH Publication
4. Narayana, K.L. & P Kannaiah (2008), Text book on Engineering Drawing, Scitech Publishers
5. (Corresponding set of) CAD Software Theory and User Manuals
6. S.N. Lal., Engineering Drawing (2018), M/S. Cengage Learning India Pvt. Ltd., Pratap Gunj, Delhi
24
With effect from the Academic Year 2018 – 2019
CS 251 ES
PROGRAMMING FOR PROBLEM SOLVING LABORATORY
Instruction 4 Periods per week
Duration of University Examination 3 Hours
University Examination 50 Marks
Sessionals 25 Marks
Credits 2
Course Objectives:
25
With effect from the Academic Year 2018 – 2019
ME 151 ES
Workshop Practice
Instruction 6 Periods per week
Duration of University Examination 3 Hours
University Examination 50 Marks
Sessionals 25 Marks
Credits 3
Course Objectives:
To learn about different tools used in workshop.
To understand the different manufacturing processes.
To learn about fabrication of components using different materials.
Course Outcomes:
Upon completion of this laboratory course, students will be able to fabricate components with their own hands.
They will also get practical knowledge of the dimensional accuracies and dimensional tolerances possible
with different manufacturing processes.
By assembling different components, they will be able to produce small devices of their interest.
Examinations could involve the actual fabrication of simple components, utilizing one or more of the
techniques covered above.
Suggested Reading:
1. Hajra Choudhury S.K., Hajra Choudhury A.K. and Nirjhar Roy S.K., “Elements of Workshop Technology”, Vol. I
2008 and Vol. II 2010, Media promoters and publishers private limited, Mumbai.
26