Ip Rating Chart
Ip Rating Chart
Ip Rating Chart
IP Rating Chart
Protection provided by enclosures for electrical equipment is indicated by the IP Code, basically by the two characteristic numerals.
First Numeral
Protection against the ingress of solid particles
IP
Second Numeral
Protection against harmful ingress of water
IP
Requirements
Example
IP
Requirements
Example
No protection
Nonprotected
No protection
1 1 Full penetration of 50 mm diameter sphere not allowed. Contact with hazardous parts not permitted. Back of hand
Vertically dripping
50
2 Finger Protected against vertically falling drops of water with the enclosure tilted 15 from the vertical. Limited ingress permitted. Protected against sprays to 60 from the vertical. Limited ingress permitted. Dripping up to 15 from the vertical
Full penetration of 12.5 mm diameter sphere not allowed. The jointed test nger shall have adequate clearance from hazardous parts. The access probe of 2.5 mm diameter shall not penetrate.
12.5
3 Tool
Limited spraying
Protected against water splashed from all directions. Limited ingress permitted.
15cm min.
Temporary immersion
This Chart is intended to be read in conjunction with AS60529. Degrees of protection provided by enclosures for electrical equipment (IP Code). The symbols shown on this chart are for explanatory purposes only. They are not part of the IP Code and must not be used instead of the Code.
Continuous immersion