Parts Manual for SNAPPER =: > FRAME 2-STAGE SNOW THROWERS MODELS 5230, 8230, 8260 & 10300S CONTENTS Subject Pages PARTS GROUP INDEX... cece AUGERS, IMPELLER, wt COLLECTOR HOUSING, 12-13 DISCHARGE CHUTE,...cscesesest2=1.3 BELTS, PULLEYS. 14-145 GEAR BOX AND SHAFTS, 16-1.7 FRAME, MAIN CASE... 24-22 CHAIN CASE....... 23-24 HANDLES, CONTROLS. 31-32 ENGINES, PULLEY, IDLER... aa WHEELS, HUBS........ 54 ELECTRIC START KITS. seed DRIFT CUTTER KITS. seventeen Bit TIRE CHAIN KIT... . 64 HAROWARE BAG. 64 SNAPPER ,.....00.:0. GA., 30253 U.S.A. it (6/97 ISSUE) MANUAL No. 06004PARTS GROUP INDEX SNOW THROWERS BLOWER CLUTCH TRACTION CLUTCH GROUP 3 GROUP 8 ee na GROUP 3 ——— __ THROTTLE ( controt GROUP 3 DIRECTIONAL CONTROL, GROUP 3 HANDLE BARS —___ GRouP 3 ENGINE Group 6 (__ CHUTE CONTROL, BELTS __ GROUP 3 Grour 1 DISCHARGE CHUTE GROUP 1 ~ IMPELLER FRAME GROUP + GROUP 2 __— wueers GROUP 5 ‘TRACTION DRIVE ~ GROUP 2 _ BLOWER HOUSING GROUP 1 crown exan nox-suerrs _| sew snots avaans sate, fosesscune “ono Printed In U.S.A. LF 2-STAGE SERIES 0GEAR CASE ~ SHAFTS pages 1.6-1.7 ITEM PART NO. 1 4.9916 4.9928 4-9913 4.9935, 4-9922 1-0817 1-3865 41-2625 4-9917 4.9927 4.9914 4.9936 4.9921 4.9677 1-3862 41-8452 1-8682 9.0793 19-0391 1-3864 5-1350 5-1490 ow aen 6 7 8A 8B 9 10 1" LF 2-STAGE SERIES 0 AUGERS, IMPELLER DESCRIPTION AUGER, Right-23" Units Serial #03 Prefix only AUGER, Right-23" Units-Serial #23 Prefix AUGER, Right-26" Units-Serial #03 Prefix only AUGER, Right-26" Units Serial #23 Prefix AUGER, Right-30" Units FITTING, Grease (For Bearings, item 8) BOLT, 5/16-18 x 1-7/8" Hex Head Shear NUT, 5/16-18 Hex Flange Lock AUGER, Left-23" Units-Serial #03 Prefix only AUGER, Left-23° Units-Serial #23 Prefix AUGER, Left-26" Units-Serial #03 Prefix only AUGER, Leff-26" Units-Serial #23 Prefix AUGER, Left-30" Units IMPELLER (Fan) ROLL-PIN, 1/4 x1-1/2" (2) BEARING, Auger Shaft (2) BEARING, Auger Shaft (2) SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap WASHER, 5/16 Internal Tooth Lock FITTING, Grease (For Augers-items 1 & 5) ASSEMBLY, Bearing/Fitting (Includes items 2 & 8A) ASSEMBLY, Bearing/Fitting (Includes items 2 & 88) (6/97) MANUAL No. 06004 1.4COLLECTOR HOUSING, DISCHARGE CHUTE LF 2-STAGE SERIES 0 MANUAL No. 06004 (6/97)ITEM core 108 " 12 13 4 15 16 7 18 19 2 23 24 NOTE: PART NO. 3-796 5-7336 3.9765 4.9915 4-9909 4.9937 3-9783 39770 3-6006 3-7982 1-3879 2-1828 3-7963 41-4207 1-4468 93-0055 9.0184 9.0203 9.0074 19-0585 9-0605 9.0363 41-1938 9.0208 41-1791 9.0196 4-401 13866 9.0506 COLLECTOR HOUSING, DISCHARGE CHUTE DESCRIPTION DEFLECTOR, Discharge ASSEMBLY, Discharge Chute (Includes wiper & replaces 3-969) RING, Chute HOUSING, 23" Blower HOUSING, 26” Blower HOUSING, 30" Blower BLADE, 23" Scraper BLADE, 26" Scraper BLADE, 30° Scraper SKID-SHOE (Repl. 3-2127) ‘SHAFT, Worm WORM BRACKET, Worm Shaft WING-NUT (Repl §-0615) WING-NUT, 5/16-18 WASHER, 1/4 SAE NUT, 5/16-18 Hex Ctr. Lock ‘SCREW, 5/16-18 x 1/2" Hex Head Cap, Grade 2 BOLT, 1/4-20 x 3/4" Short Neck Carriage, Grade 5 NUT, 5/16-18 Hex FI, Lock BOLT, 5/16-18 x 5/8" Square Neck Carriage, Grade 5 ‘SCREW, #10-24 x 5/8" Hex Head Washer Face RETAINER (Chute Ring to Housing) BOLT, 5/16-18 x 1" Carriage RETAINER, 5/16 Bolt NUT, 5/16-18 Hex, Grade B ors ROLL-PIN, 1/8 x 9/4" WASHER, 3/8" .D. Flat SCREW, 3/8-16 x 1/2" Hex Self-Tap (Serial 03 Prefix) ITEM PARTNO. DESCRIPTION -- 9.0815 25 9.0001 26A 1.3930 2681-4941 27a 1-3928 2781-4929 283-2126 29° 12117 303-2125 31 36011 323-8008 333-8041 341-4230 359-0041 361-1079 373-6130 38A 1.9985 38B 11-6011 391-4911 405-7433 411-4916 42 9.0233 43 9.0188 449-0222 459-0530 461-2688 ‘SCREW, 3/8-18 x 3/4” Self- Tap (Serial 23 Prefix) BOLT, 5/16-18 x 3/4” Short Neck Carriage, Grade § DECAL, Collector Warning DECAL, Collector Danger DECAL, Deflector Waming DECAL, Deflector Danger CONNECTOR-Used on 23 & 26 Units (Item 34 for 30°) BUSHING BRKT, Worm Shaft Support EXTENSION, 30° Discharge ‘Chute BAR, Stiffener- (30° Units only) BRACE, Side- 30" Units only UNIVERSAL-OINT (30°) COTTER-PIN, 1/8 x 1" WASHER, Spring Stee! BRACE, Chute CHUTE (Plastic) CHUTE (New Piastio)(not shown) HINGE, Chute ASSEMBLY, Chute Deflector (Includes 1-9745 Deflector, items 39 & 41) PIN, Hinge ‘SCREW, 5/16-24 x 3/4" Hex Head Cap (or 9-0605) WASHER, 5/16 SAE (2) NUT, 5/16-24 Hex Center Lock BOLT, #10-24 x 1/2" Square Neck Carriage, Grade 2 NUT, #10-24 Hex Flange Lock 5.1361, Discharge Chute Assembly includes items 1, 2, 27A & fasteners. 6-0691, Chute Brace Kit includes item 37 & fasteners. LF 2-STAGE SERIES 0 1.3 (6/97) MANUAL No. 06004BELTS, IDLER, DRIVE PLATE, SHEAVE REFER TO PAGE 1.7 FOR IMPELLER SHAFT DIFFERENCES MANUAL No. 06004 (6/97) LF 2-STAGE SERIES 0ITEM PART NO. 1-5-1266 2 14-3860 34-3859 4 1:3019 59-0791 6 9.0122 74-3850 8 9.0499 98 9.0196 101-3848 141-3849 12 9.0383 131-9931 141-3024 15 9-001 16 9.0585 171-3867 181-3037 ~ 1-399 191-3852 201-3861 215-7274 221-2252 235-1958 241-4295 251-3936 = 1-3938 281-0935 = 1-4296 271-3868 28 9.0187 291-9689 309-0302 311-0776 BELTS, IDLER, DRIVE PLATE, SHEAVE DESCRIPTION ASSEMBLY, Idler Arm (Includes items 2 & 3) RIVET (2 required) PAD, Brake SPRING, Extension BOLT, 3/8-16 x 1-1/2" Square Neck Carriage, Grade 2 WASHER, 3/8 SAE PULLEY, Idler NUT, 3/8-16 Hex Top Lock NUT, 5/16-18 Hex, Grade B or 5 WASHER, .33 1.0.x 1.25 O.D. Flat SPACER BOLT, 5/16-18 x 1" Square Neck Carriage, Grade 5 HOUSING, Bearing BEARING (Includes set-sorews) BOLT, 5/16-18 x 3/4” Short Neck Carriage, Grade 5 NUT, 5/16-18 Hex Flange Lock ‘SHEAVE, Blower (Includes set-screws) BELT, Blower (All units with Briggs Engines) BELT, Blower (All units with Tecumseh Engines) WASHER, Thrust (Use with item 21 Drive Plate) KEY, #11 Woodruff DRIVE-PLATE (Serial Prefix 03 only- incl. 2 item 22)* (Replaced by 5-1424) BUSHING DRIVE-PLATE (Serial Prefix includes 2 item 24)** BEARING, Ball BELT, Traction (All units with Briggs Engines) BELT, Traction (All units with Tecumseh Engines) WASHER, 3/4” I.D. x 1-1/8" O.D. Flat WASHER, 1/2 Shim RING, Snap (Use with item 21 Drive Plate) WASHER, 5/16 Split Lock COVER, Belt Guard SCREW, 1/4-20 x 3/8" Hex washer Self-Tap RING, Snap (Use with item 23 Drive Plate) *NOTE: Requires #2-7607 Impeller shaft-refer to item 11, page 1.7 “NOTE: Requires #2-7630 Impell LF 2-STAGE SERIES 0 shaft-tefer to item 11, Page 1.7 (6/97) MANUAL No. 06004GEAR BOX, SHAFTSITEM geervouren é 2 ory 4 15 16 7 18 19 24 PART NO. 2-7638 2-7639 2-9552 1-3857 5-1305 41-3855 1-3858 1-8451 9.0290 1-3854 1-9674 9.0508 2.7607 22-7630 13313 1-3862 1-3856 13861 2-7608 10935, 1-252 13853 1-8450 9-0363, 5-7304 5-7305 58-7306 LF 2-STAGE SERIES 0 GEAR BOX, SHAFTS DESCRIPTION SHAFT, Auger- 23" Units (Replaces 2-9550) ‘SHAFT, Auger- 26" Units (Replaces 2-9548) SHAFT, Auger- 30° Units (All) KEY, #4 Woodruff GEAR, Worm (Replaces 2-7605) WASHER, Thrust SEAL, Oil COVER, Gear Case SCREW, 1/4-20 x 3/4” Hex Washer Head Self-Tap O-RING, Case Cover CASE, Gear SCREW, 3/8-16 x 1/2" Hex Head Cap (Used as plug) ‘SHAFT, Impeller (Bushing Type- Serial Prefix 03 only)* SHAFT, Impeller (Ball Brg. Type- Serial 23 Prefix)" BEARING, Impeller Shaft ROLL-PIN, 1/4 x 1-1/2" SPACER, Gear- Bearing KEY, #11 Woodruff GEAR, Rolled Worm WASHER, Thrust BUSHING, Impeller Shaft (O-RING, Case Cap CAP, Case ‘SCREW, #10-24 x 5/8" Hex Washer Self-Tap ASSEMBLY, Gear Case 30" ITEM 11 - VISUAL DIFFERENCES +#2-7607 for Bushing Drive Plate (Uses 1-3868 Snap Ring) 12-7630 for Ball Bearing Drive Pl = (Uses 1-076 Snap Ring) “NOTE: Use with 5-7274 Drive Plate only- refer to item 21 page 1.5, “NOTE: Use with 5-1358 Drive Plate only- refer to item 23 page 1.5 4.7 (6/97) MANUAL No. 06004FRAME, TRACTION DRIVE SEE PAGES 9,1-9.2 for CONTROLS Te ‘| fi aD "—@) WHEELS & Hues (SEE PAGE 5.1) MANUAL No. 06004 (6/97) mn LF 2-STAGE SERIES 0ITEM PART NO. 1 19684 2 4207 3-3-2125 4 39768 53-7967 6 1.3872 7 32124 8 39970 91-3089 101-3874 11 1.0758 1203-2121 13 3.9769 141-8460 152-7610 161-0614 171-3884 18 3.2120 19 2.9549 205-7275 - 81217 ~ 57276 - 57367 213-7965 22 3.2130 231-2264 242-4843, 251-3800 261-3875 27 9.0302 281-3878 291-3861 301-0935 31 9.0005 32. 9.0771 33 9.0361 34 9.0188 351-0890 36 9.0788 379-0790 381-1791 39 9.0206 40 9.0184 411-3848 421-3849 LF 2-STAGE SERIES 0 FRAME, TRACTION DRIVE DESCRIPTION ROD, Activating BUSHING BRACKET, Support COVER, Frame Back COVER, Frame Back STUD, Shift Lever BELL-CRANK, Traction FRAME (Order items 9 & 10 when replacing) BUSHING, Axle Shaft (2) BUSHING, Hex Shaft BEARING RETAINER, Bearing COVER, Frame Bottom GEAR, Axle Shaft HEX-SHAFT KEY, 1/8 x 5/8" Woodruff (for Hex Shaft) PINION, Hex Shaft BRACKET, Idler Mounting AXLE-SHAFT BRACE, Frame (For Briggs 8HP Engine) BRACE, Frame (For Tecumseh SHP Engine) BRACE, Frame (For Tecumseh 10 HP Engine) BRACE, Frame (For Briggs 5 HP Engine) BRACKET, Clutch BRACKET, Spring ‘SPRING CROSS-SHAFT (was #2-1827)* CAP, 5/16" Push (not used with new #2-1843 shaft)* PUSH-ROD SCREW, 1/4-20 x 3/8" Hex Washer Self-Tap ROLL-PIN, 3/16" (for Axle Shaft) KEY, #11 Woodruff (for Axle Shaft Gear) WASHER, 3/4 x 1-1/8" Flat (4) BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5 (2) NUT, 1/4-20 Hex Flange Lock (2) SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap WASHER, 3/8 SAE WASHER, Shim BOLT, 5/16-18 x 3/4” Square Neck Carriage, Grade § BOLT, 5/16-18 x 1-3/8" Short Neck Carriage, Grade 5 RETAINER, 5/16" Bolt (4) ‘SCREW, 5/16-18 x 3/4” Hex Head Cap, Grade 2 NUT, 5/16-18 Hex Center Lock (3) WASHER, 5/16 Fiat (4) SPACER (2) “Revised 1/82 (6/97) MANUAL No. 06004 2.2CHAIN CASE (TRACTION DRIVE) MANUAL No. 06004 (6/97) LF 2-STAGE SERIES 0ITEM 10 "1 12 8 4 15 16 7 18 19 20 2 22 23 PART NO. 51269 3.9779 9.0307 1-1024 1-8059 10756 1-0940 41-3881 41-3882 41-0941 4.0456 41776 2-0808 1.0776 41121 1.0614 9-0356 5-0614 41-0756 9.0316 2.0911 9.0187 9.0196 LF 2-STAGE SERIES 0 CHAIN CASE (TRACTION DRIVE) DESCRIPTION ASSEMBLY, Chain Case (Includes items 2 thru 23) COVER, Sprocket ‘SCREW, #10-24 x 1/2" Hex Washer Self-Tap (7) PLUG, Oil Fill & Check GASKET BEARING, Ball (2) SHAFT & SPROCKET BUSHING (2) WASHER, Thrust (2) CHAIN HUB & SPROCKET CASE, Sprocket ROLLER RING, 1/2" External Retaining (Heavy Duty) WASHER, 5/8" Belleville KEY, 1/8 x 5/8 Woodruff NUT, 5/8-18 Hex Center Lock ASSEMBLY, Drive Disc (Includes items 19 thru 23) DRIVE DISC BOLT, 5/16-18 x 3/4” Square Neck Carriage, Grade 2A (3) HUB WASHER, 5/16 Split Lock (3) NUT, 5/16-18 Hex, Grade B or 5 (3) 24 (6/97) MANUAL No. 06004HANDLES, CONTROLS © ISIVAIBEER? FRAME (SEE PAGES 2.1 8 2.2) MANUAL No. 06004 (6/97) 34 LF 2-STAGE SERIES 0ITEM PART NO. 1A 3.9973 185-1272 2 32119 39772 41-1870 51-8462 6 13917 7 32131 81-3849 91-3887 101-3889 111-4297 121-2659 133-2120 143-7962 153-5059 161-1853 174-1138 181-8463 — — 1-8464 194-2117 20 © 1.3886 - — 1-4298 241-3901 221-3900 23 3.2126 24a 3.9972 24B 51271 25 39771 262-3033, 27 9.0188 23 9.0771 29 9.0209 30 9.0307 31 9.0242 329-0303 33 9.0222 34 9.0112 359-0552 369-0005 37 9.0130 381-3877 39 9.0041 409-0585 411-3848, 421-3926 431-3925 441-8471 451-8593 481-3027 471-3028 489-0184 491-3916 501-4940, 511-8223 ~ 60471 ~ 60543 LF 2-STAGE SERIES 0 HANDLES, CONTROLS DESCRIPTION HANDLE BAR, Right ASSEMBLY, R.H. Handle Bar (Includes items 1A, 2, 32 & 35) BRACKET, Handle HANDLE, Right GRIP, Handle CABLE, Clutch (2) (Includes Chain & Spring) SHOOK (2) LEVER, Clutch SPACER ROD, Lower Shift CONNECTOR ROD, Upper Shift (Replaces 1-3888) KNOB, Shift Handle HANDLE, Shift BRACKET, Shift Lever PANEL, Control SWITCH, Ignition (See page 4.2 for electric start type) Key CONTROL, Throttle Briggs Engines) CONTROL, Throttle (Tecumseh Engines) BUSHING. CRANK, Chute (For 23" & 26" Units- used with item 23) CRANK, Chute (For 30° Units with U-joint item 34 page 1.2) KNOB, Chute Crank CAP, Push CONNECTOR, Chute Crank (Used with 1-3886 crank only) HANDLE BAR, Left ASSEMBLY, LH, Handle Bar (Includes items 24A, 2, 32 & 35) HANDLE, Left SPRING, Shift Lever WASHER, 5/16 SAE NUT, 1/4-20 Hex Flange Lock SCREW, 5/16-18 x 1" Hex Head Cap, Grade 2 SCREW, #10-24 x 1/2" Hex Washer Self-Tap SCREW, 5/16-24 x 1-1/2" Hex Head Cap, Grade 2 NUT, 1/4-28 Hex Top Lock NUT, 5/16-24 Hex Center Lock SCREW, 1/4-24 x Hex Head Cap, Grade § ‘SCREW, 1/4-28 x 1-3/8" Hex Head Cap, Grade BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5 NUT, 3/8-16 Hex PIN, 1/8 x 1" Roll PIN, 1/8 x 1" Cotter NUT, 5/16-18 Hex Flange, Grade 5 WASHER, 5/16 Flat DECAL, Blower Clutch DECAL, Traction DECAL, Controls DECAL, Snapper (Replaces 1-8076) DECAL; Directional Control DECAL, Instruction NUT, 8/16-18 Hex Center Lock WIRE, Ground CABLE-TIE, 5* (Not Shown) HANG-TAG, Initial Starting HARDWARE BAG (contains items: 5(2), 6(2), 7,8,37,39,40(4) & 48(3) as well as 1-1938 (Spout Retainer) & 1-3865 (Shear Bol)) HARDWARE BAG (contains items: 5(2), 6(2), 7,8,37,39,40(8), & 4893) as well as 1-1998 (Spout Retainer, 1-3865 (Shear Bol), 1-8687 (Wiring Harmess) & 3-7982 (2 Skid Shoes)) 32 (6/97) MANUAL No. 06004ENGINES, PULLEY IDLER ENGINE DETAILS: 5 HP TECUMSEH TEC. MODEL HSK50 TEC. TYPE 65439M 8 HP BRIGGS & STATTON B&S MODEL 190412 Bas TYPE 1024 10 HP TECUMSEH TEC. MODEL HMSK 100 TEC. TYPE 1590766 ITEM PART NO. 1 3-7989 2 3.2128 31-9689 4A 14145 481-4900 4c 1.5376 4D 1.5377 51-0210 6 1.3850 7 13918 8 = 3.2150 MANUAL No. 06004 (6/97) BELTS - SEE PAGE 1.4 BELTS- SEE PAGE 1.4 DESCRIPTION GUARD, Engine ARM, Idler COVER, Belt PULLEY, Double 1x2.5, 2.75 (was 2-7611)* PULLEY, Double 75x2.5, 2.75 PULLEY, Blower 4L, 2.75 PULLEY, Traction 3L, 2.25 KEY, 1/4 Square x 2" IDLER, 2-1/4" Dia. SPRING FINGER, Belt ITEM 9 10 "1 12 3 4 15 16 PART NO. DESCRIPTION 9-0302 9-0201 90791 9.0188 1-3849 1-386 9.0227 9.0499 SCREW, 1/4-20 x 3/8" Hex Washer Self-Tap SCREW, 5/16-18 x 5/16" Hex Socket Set BOLT, 3/8-16 x 1-1/2" ‘Square Neck. Carriage, Gr. 2 WASHER, 5/16 SAE SPACER WASHER, 3/8" Flat SCREW, 5/16-24 x 5/8" Hex Head Cap, Grade 2 NUT, 3/8-16 Hex Top Lock “Revised 1/82 LF 2-STAGE SERIES 010 " PART NO. DESCRIPTION 41-8520 19751 3-2250 41-8535 6-0660 3-8019 3-8168 9.0808 41-4121 9.0208 92-0395 92-0196 1-4083 11155 6-0651 COVER, Battery (for 18535) COVER, Battery(for 6-0660) PLATE, Hold Down BATTERY, 12 V Sealed Lead Acid (6 AH. BATTERY, 12 V (12AH) BRACKET, Battery Mig BRACKET, Battery Mtg. SCREW, #10-32x4-1/2" (2) CLIP-NUT, #10-32 (2) SCREW, 5/16-18 x 3/4" Hex Head Cap, Grade 2 (2) WASHER, 5/16 Internal Tooth Lock (2) NUT, 5/16-18 Hex, Grade B oF 5(2) WIRE, Negative SWITCH (Includes two Koys,1-1138) 12 V BATTERY SYSTEM (10300S) ITEM 13° 14a" 143° 15" 16" 7 18" 19" 20" air 22" 23" 24" PART NO. DESCRIPTION 41-8554 41-4910 41-8701 4-8702 9.0311 9-055 91138 9.0184 9.0411 98-0601 1-2688 1-4951 41-5008 41-5009 HARNESS, Wiring CLAMP, Battery HARNESS, Charging (B&S) HARNESS, Charging (Tec.) WING-NUT, 1/4-20 (2) WASHER, 1/4 SAE SCREW, 5/16-18 x 5/8" Hex Head Cap, Grade 5 (2) NUT, 5/16-18 Hex Center Lock (2) SCREW, #10-24 x 1/2" Hex Head Cap WASHER, #10 External Tooth Lock NUT, #10-24 Hex “Whiz Lock’ (2) HARNESS CLIP WIRE, Battery to Switch DECAL, Charging KIT, On Board Battery (8-10 HP, includes *marked items above as well as 41-4952 Instructions) LF 2-STAGE SERIES 0 42 (6/97) MANUAL No. 06004WHEELS, HUB Q wweet a re assenouy NOTE: LEFT SIDE WHEEL SHOWN (Components same on right side) ITEM PART NO. 1 5.0714 21-0524 31-2162 44-2234 1 5.0713 2 14-4097 31-2163 41-2234 5 40464 61-0935 7 90367 81-2022 MANUAL No. 06004 (6/97) DESCRIPTION WHEEL & TIRE ASSEMBLY- 23° & 26" Units (Includes items 2, 3 & 4) TIRE, 16 x 4,80 x 8 (23" & 26° Units) RIM (23° & 26" Units) VALVE, Air (Snap-in) WHEEL & TIRE ASSEMBLY- 30" Units (Includes items 2, 3 & 4) TIRE, 16 x 6.50 x 8 (30° Units) RIM (80° Units) VALVE, Air (Snap-in) HUB, Wheel (Used on right & left side) WASHER, 3/4” Flat BOLT, 1/2-20 x 3/4" Hex Head Cap, Grade 2 RETAINER (Klick-pin) 54 LF 2-STAGE SERIES 0ACCESSORIES/KITS ELECTRIC START KITS. KIT# = TYPE FOR 0469 120V-G0ar Tacurseh BHP eae 120V erage BHP 607s 120V Tecumseh GHP (Canada) 6-0509, 120/60V (12 V. Battery) Tecumseh 6-0510 230/50V (12 V. Battery) Tecumseh 0511 12060V 412 Baton?) Biggs nee ear ee ecrenn (aes 6-0637, 120V Tecumseh 8 & 10HP- 6.0645 120V Tecumseh 8 7 10HP (Canada) 6-0646 12V Jump Start Tecumseh 10HP- 66-0647 12V Jump Start Briggs 8HP 66-0649 120V Briggs SHP 66-0650. Light, Briggs 8HP_ DRIFT CUTTER kit + 6-0472 fence / morse ine 001 Sites sur By TIRE CHAINS. HARDWARE BAG No. 6-0471 KIT #6-0049 PART NO. DESCRIPTION frais 20565 NUT. S6-1 HoxFrange Loc, Gade 5 () far aeoees 308 WASHER, Ste Fit @) for 16-6.50x8 1-3849 SPACER 1-3865, BOLT, 5/16-18 x 1-7/8" Hex Head Shear (2) 1-3917 *S"-HOOK (2) 41-8462 CABLE, Clutch (2) 3-2131 LEVER, Clutch O03? py asa x4 Cater Soni PIN Vex" Coter 19-0184 NUT, 5/16-18 Hex Center Lock 20222 © NUT, 0-24 Hex Cera Lok 9-0242 SCREW, 5/16-24 x 1-1/2" Hex Head Cap, Grade 2 (4) 20207 SCREW. #1024 12" Hex Vasher Sel-Tap@) 9-0130 NUT, 3/8-16 Hex INCLUDES 2 CHAINS 1-389 CONNECTOR LF 2-STAGE SERIES 0 en (6/97) MANUAL No. 06004Parts Manual for SNAPPER LARGE FRAME 2-STAGE SNOW THROWERS MODELS 5230, 8230, 8260 & 10300S IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES. OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. SNAPPER ore.000129,01.. 30255054 MANUAL No. 06004 (6/97 ISSUE) Printed in U.S.A.