Demco Catalog

SERIES DM AND DT/DB GATE VALVES
TABLE OF CONTENTS
FEATURES AND BENEFITS
Series DM Gate Valves 2
Series DM 7500 Gate Valves 3
Series DT & DB Gate Valves 4&5
PRODUCT SPECIFICATIONS
General Technical Information 6&7
DIMENSIONS AND MATERIALS

PARTS LIST
Series DM 7500 Gate Valves

7500 psi WP 8 through 15
Series DM Gate Valves

1000, 2000, 3000 & 5000 psi WP 16 through 29
Series DM Gate Valves

ASME/ANSI CLASS 400 & 600 30 through 33
ASME/ANSI CLASS 900 & 1500 34 through 37
Series DT Gate Valves

ASME/ANSI CLASS 600, 900 & 1500 38 through 45
TERMS AND CONDITIONS 46 & 47
TRADEMARK INFORMATION 48
TC1815
06/04 NP-5M 1
SERIES DM GATE VALVES
DEMCO Series DM Gate Valves, the premier designed Gate Valve in the oil and gas drilling
market, specifically engineered for the rigorous requirements of oilfield applications.
Designed for dependable, heavy duty performance in abrasive service conditions, DEMCO DM gate valves are
commonly selected for a number of oilfield applications, including:
• Drilling standpipe manifold • Pump manifold block valves • High pressure mud mixing lines
• High pressure drilling system block valves • Wellheads • Well treating and frac service
• Production manifolds • Production gathering systems • Production flow lines
The DEMCO Series DM Gate Valves are available in ASME/ANSI Classes 400, 600, 900 and 1500.
Also available in API working pressures 2000, 3000 and 5000 psig. (Not API Monogrammed).

IN LINE FIELD REPAIRABILITY
The bonnet is easily removed for internal parts inspection and/or
replacement without removing the valve from the line. A
This design simplicity permits fast and easy service without the need
for special tools.
F
FLEXIBLE TRIM OFFERINGS
Optional materials for stems, gates, seat inserts and seat elastomers
make it easier to trim valves for a wide range of service conditions.
Three internal plastic coatings for the body and bonnet are offered
to improve resistance to wear and corrosion.
DOUBLE ACTING THREAD DESIGN FOR FAST OPERATION

A The ASME/ANSI series double acting thread design uses a E
threaded stem into the gate working with threads in the bonnet
and handle assembly.
Stems are polished and include a dependable O-ring and anti- DM 3 in. (80 mm) ASME/ANSI 900/1500
extrusion seal. This unique design is economical and effective.
Note: 4 inch (100 mm) ASME/ANSI Class 1500 valve is a double acting,
rising stem design, similar to the 4 inch (100 mm) 3000 psi valve.
B The DM 2000, 3000 and 5000 psig working pressure valves have D
double acting threads working together in a specially designed stem
screw, screw housing and stem arrangement (except 4 inch (100 mm)
and larger 5000 psi is a single thread, heavy duty rising stem design
with bearings).
C The rising stem design protects the stem threads from the lading.
D Larger 3000 and 5000 psi DM Gate Valves include a sight lens to view
B
the stem for determining gate position. C
EXCLUSIVE SEAT DESIGN FOR DROP TIGHT SEALING
The DEMCO Series DM gate valve seat uses a unique design to
provide a drop tight shut off in abrasive and erosive service.
E The seat consists of two identical metal wear rings encapsulated in
elastomer to form a cylindrical shape with a gate slot and two round
ports. The closed gate bears on the downstream wear ring while the
elastomer provides a drop tight pressure responsive seal around the port.
F The cylindrical seat assembly fits into the machined body cavity and is F
expanded outward towards the valve ports by the bonnet and spread
ring in the bottom of the seat. The expansion occurs when the bonnet is
tightened on to the body while engaging the seat pin extensions from
both wear rings. The spread ring ensures the seat elastomer presses
uniformly against the body bore. E
This design ensures a tight seat seal against the body and around each
valve port and has proven to be effective even if the gate and seat ring
become scored or abraded during service.
When it comes time for maintenance, the seat’s single piece design
makes it easy to pull out of the body for replacement. DM 4 in. (100 mm) 5000 WP (4 Bolt design shown)
2 TC1815
06/04 NP-5M
SERIES DM 7500 GATE VALVES
IN LINE FIELD REPAIRABILITY
The bonnet is easily removed for internal parts inspection and/or replacement without removing the valve from the line.
This design simplicity permits fast and easy service without the need for special tools.
HEAVY DUTY ROLLER BEARINGS

Heavy duty stem roller bearings reduces torque on 4 inch (100 mm) and larger valves.
FLOATING SLAB GATE DESIGN

A slab gate with “T” slot stem connection allows the gate to float to the seat providing a tighter pressure responsive seal.
A Unique, abrasion resistant, one piece seat design.
The seat assembly consists of two stainless steel insert/support rings
to which a resilient elastomer is permanently bonded.
The elastomer provides tight shut off after long use in abrasive service. E
The stainless steel rings are corrosion and erosion resistant.
The one piece design makes field replacement easier.
B Locking seat alignment D
The seat assembly is engineered with a metal “lock shell” that aligns
the seat in the bottom of the valve. This design ensures accurate seat
alignment with minimum resistance to flow.
C Body wear rings
Surface hardened alloy body wear rings back up both sides of the seat.
These rings extend the service life of the valve by absorbing erosive
wear that can damage the body around the seat bore area.
D Rising stem design F
The DEMCO DM 7500 uses a rising stem design which isolates and
protects the threads from the line medium. The rising stem also indicates
gate position.
E Visual position indicator lens G
On 3 inch (80 mm) and larger valves a clear position indicator lens allows
the operator to easily determine whether the valve is open or closed.
The indicator lens also helps to protect the stem threads from the
elements.
F Replaceable stem packing
The stem packing can be replaced without removing the bonnet from the
valve (3 inch 80 mm - 6 inch 150 mm) saving time when this maintenance
may be required (note: line and valve pressure must be relieved before
performing this maintenance).
G Flow cleansed design
The body cavity area is designed to allow continuous “flushing” by the
fluid flow. This action prevents the valve from “sanding up”, even in
standpipe installations. C A B C
DM SERIES PRESSURE CLASSES AND SIZES
SIZE in. (mm) 400 600 900 1500 1000 2000 3000 5000 7500*
FP 1 1/2 (40) • •
2 (50) • • • • • • • •
2 1/2 (65) • • • • • •
3 (80) • • • • • • • •
4 (100) • • • • • • • •
5 (125) • • • •
6 (150) • • •
RP 2 x 1 1/2 (50 x 40) •
2 1/2 x 2 (65 x 50) • • •
3x2 (80 x 50) • •
4x3 (100 x 80) • • •
5x4 (125 x 100) • • •
6x4 (150 x 100) •
6x5 (150 x 125) • • C A B C
8x6 (200 x 150) •
* Other Weld Connections are Available. Consult Factory for Information.

TC1815
06/04 NP-5M 3
SERIES DT/DB GATE VALVES
DEMCO Series DT/DB Gate Valves are recognized for their quality design, rugged dependability
and corrosion resistance, particularly for use in waterflood and CO2 applications.
DEMCO Aluminum Bronze and Stainless Steel Valves and Accessories are designed especially for the demanding
requirements of corrosive CO2 injection and waterflood applications in the enhanced oil recovery market.
• The handle moves up and down on the bonnet or the top of the stem is visible during operation providing
visible aid to determine whether the valve is open or closed
Stem threads isolated from line media
SEAT SPRING
SEAT SEAL
Four ring packing set
SEAT ASSEMBLY DETAIL

P-10
(SEAT/SEAL OPTION 6)
SEAT SPRING AND SEAL
PART OF SEAT ASSEMBLY
SEAT SEAL
Full through conduit design

PEROXIDE CURED BUNA OR VITON
(SEAT/SEAL OPTION 1 OR 2)
SEAT SEAL PART OF SEAT ASSEMBLY
DT AND DB SERIES PRESSURE CLASSES AND SIZES

DT SERIES THREADED AND FLANGED
SEE PAGES 38 THROUGH 45 FOR SIZE in. (mm) ASME/ANSI 600 900 1500
MATERIAL SPECIFICATIONS FP 2 (50) • • •
Optional Materials: 2 1/2 (65) • • •
DT Series: 3 (80) • • •
• SS Body and Bonnet, Viton or P-10 Seats 4 (100) (Flanged Only) • • •
DB Series: DB SERIES VALVES (Consult Factory for Drawings)
• Viton Seat Elastomer
FP 6 (150) • • •
• Peroxide cured Buna-N
RP 6 x 4 (150 x 100) • • •
8x6 (200 x 150) • •
4 TC1815
06/04 NP-5M
SERIES DT/DB GATE VALVES
IN LINE FIELD REPAIRABILITY E
The bonnet is easily removed for internal parts inspection
and/or replacement without removing the valve from the line.
This design simplicity permits fast and easy service without the
need for special tools.
CORROSION RESISTANT MATERIALS ARE STANDARD
C
Body and bonnet materials as well as all internal wetted parts
comply with NACE RP-0475.
RISING STEM DESIGN
The handle moves up and down on the bonnet or the top of
the stem is visible during operation providing visible aid to A
determine whether the valve is open or closed.
A Pressure responsive drop tight sealing
Standard seats consist of 316 SS seat rings encapsulated
with 90 Durometer, peroxide cured Buna-N elastomer
to provide reliable, drop tight sealing for extended
service life.
B Superior abrasion resistance B D
Buna-N elastomer encapsulated seats also provide an
excellent deterrent to abrasion, further enhancing
extended service life. SERIES DT GATE VALVES
C Four ring stem packing set
The DEMCO DT stem seal design uses four packing rings
preventing leakage into the stem journal and outside F
the valve.
D Through conduit gate design
Full through conduit design assures non turbulent flow
and gate alignment for improved valve performance
and longer service life.
E Non wetted stem thread design
DEMCO’s stem design isolates corrosive lading from
contacting stem threads preventing stem seizure and BALL CHECK VALVES
assuring long trouble free valve performance.
ACCESSORIES
G
Ball check valves, flow tees and strainers are available to
complete requirements for an entire injection assembly.
F Ball Check Valves
G Flow Tees
H Strainers
SERIES DB GATE VALVE

The DEMCO Series DB gate valve is available for the large
6 in. (150 mm) and 8 in. (200 mm) pipe sizes in the enhanced
oil recovery market. These valves also feature aluminum bronze
FLOW TEES
body and bonnet as standard. Internal parts are 316 SS.
The exclusive seat design of the DEMCO DB gate valve is the
same proven design found in the DEMCO DM series gate
H
valves. The seat consists of two identical metal wear rings
encapsulated in elastomer to form a cylindrical shape with a
gate slot and two round ports. The closed gate bears down on
the downstream wear ring while the elatomer provides a
drop tight, pressure responsive seal around the port.
This design provides an effective seal even if the gate and seat
ring become scored or abraded during service.
The DEMCO Series DB is also field repairable while the valve is STRAINERS
in line.
TC1815
06/04 NP-5M 5
SERIES DM, DT & DB GATE VALVES
GENERAL TECHNICAL INFORMATION
Valve Size Designations and Weld End Dimensional Information

1. All references to pipe size in this catalog is the nominal size.
The actual OD and ID for various nominal sizes and schedules is tabulated below.
Weld End bodies are machined at each end to match the pipe OD and ID.
NOMINAL ID
SIZE in. (mm) OD Sch. 40 Sch. 80 Sch. 160 XXH
1 1/2 (40) 1.900 1.610 1.500 - -
2 (50) 2.375 2.067 1.939 1.687 1.503
2 1/2 (65) 2.875 2.469 2.323 2.125 1.771
3 (80) 3.500 3.068 2.900 2.624 2.300
4 (100) 4.500 4.026 3.826 3.438 3.152
5 (125) 5.563 - 4.813 4.313 4.063
6 (150) 6.625 6.065 5.761 5.187 4.897
2. Reduced port valve size descriptions are designated by two numbers.

The first number is the nominal size of the end connection.
The second number is the ID of the valve seat (dimension “C” in the tables).
PRESSURE RATINGS
DEMCO Gate Valves are designed for the maximum working pressures and test pressures tabulated below.
PRESSURE RATINGS
CLASS CLASS CLASS CLASS 1000 2000 3000 5000 7500
400 600 900 1500 WP WP WP WP WP
990 WP 1480 WP 2220 WP 3705 WP 1000 WP 2000 WP 3000 WP 5000 WP 7500 WP
1500 Test 2225 Test 3350 Test 5575 Test 2000 Test 4000 Test 6000 Test 7500 Test 11,250 Test
Gate valve rating must be selected to match the piping system in which the valve will be installed.
Tabulated below are working pressures at 100o F for ASTM A106 Grade B AISI 4130 60K minimum yield pipe in sizes
corresponding to DEMCO Gate Valves.
PRESSURE RATINGS
ASTM A106 GRADE B 4130 60K MIN. YIELD
SIZE in. (mm) Sch. 40 Sch. 80 Sch. 160 XXH XXH
1 1/2 (40) 1340 2430 - - -
2 (50) 1210 2220 4300 5970 10234
2 1/2 (65) 1620 2590 3950 6590 -
3 (80) 1460 2370 3930 5880 10080
4 (100) 1300 2130 3830 5150 8826
5 (125) - 1970 3730 4650 7971
6 (150) 1110 1970 3650 4724 8098
8 (200) 1030 1790 - - -
6 TC1815
06/04 NP-5M
SERIES DM, DT & DB GATE VALVES
GENERAL TECHNICAL INFORMATION
SPECIAL ORDER ACCESSORIES
• Square Operating Nuts
Offered to replace handles, for wrench operation.
Nuts are sized for 2 inch (50.8 mm) square sockets.
Locking devices for tamper proof valve settings of standard handles are also available.
• Special Stem Extensions
Available on all gate valves, for buried service.
Extended stems are housed from the valve bonnet to the handle; operation of the valve
is identical to normal assembly.
• Actuators
Automated or remote controlled applications may be furnished on special order.
Prices for pneumatic or hydraulic actuators can be provided on request.
TESTING
• DEMCO Gate Valves are hydrostatically tested at assembly.
Stem seal, body and seat are inspected for zero leakage under pressure, before acceptance.
SEAT SEAL OPTIONS
• Buna-N (nitrile)
Is excellent for petroleum oil and gases, fuel oils and alcohols from -10oF to +200oF.
(-23oC to +93oC).
• Hypalon
Compounded for maximum chemical resistance.
Particularly suited for oxidizing acids, it resists hydrocarbon oils and fuels from -10oF to +250oF.
(-23oC to +121oC).
• Viton
Highly resistant to mineral acids and hydrocarbons and resists moderate concentrations
of hydrogen sulfide.
Serviceable from -10oF to +400oF. (-23oC to +204oC). (Not suitable for steam).
• HNBR
Formulated for use with synthetic and oil base drilling mud service from -20°F to +250°F (-29°C to +121°C).
PLASTIC COATINGS - DM GATE VALVES ONLY
Internally plastic coated body and bonnet are offered with three coatings.
All coatings are applied 5 to 6 mil thickness.
• DEMCO 10
A catalyst cured epoxy with excellent adhesion and resistance to wear, chipping and abrasion.
Unaffected by most acids, alkalis, brines and petroleum products up to +150oF. (+66oC).
• DEMCO 11
A baked on phenolic serviceable to +200oF. (+93oC) and resistant to organic and mineral acids,
hydrocarbons and corrodents encountered in oil and gas production.
(Not recomended for caustics).
• DEMCO 12
A baked on phenolic epoxy, tougher and more abrasion resistant.
Excellent for service in caustics and salt water up to +200oF. (+93oC).
ORDERING INFORMATION
• Give size, pressure class and end connection.
• Specify pressure class of flanged ends, raised face (RF) or ring type joint (RTJ).
• For threaded ends, provide type of pipe:
TBG (non upset tubing)
UPTBG (external upset tubing)
LCSG (long casing thread).
CSG (Short casing thread).
• For weld ends, give schedule of mating pipe.
• For applications in high pressure gas above 3000 psi or involving concentrations of
H2S or CO2 consult factory for recommendations.
TC1815
06/04 NP-5M 7
7500 psi WP
2 in. (50 mm) FULL PORT
FOR GENERAL SERVICE CONDITIONS
14.00 (356) DIA
BRONZE BUSHING 13.04 (331)

(OPEN)
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER
2.63 (67)
DIMENSIONAL DATA & WEIGHTS

VALVE SIZE 2 in. (50 mm) FP
DIMENSION 7500 WP
A Weld End 9.00 (229)
Flanged End, Short Length 18.38 (467)
Flanged End, API Length 20.50 (521)
VALVE SEAT ID 2.00 (51)
FOR FLANGED ENDS

API Ring Number BX-152
Flange ID 2.06 (52)
Flange OD 7.88 (200)
Flange Bolts (QTY. - SIZE in.) 8 - 3/4
NUMBER OF HANDLE TURNS FROM OPEN TO CLOSED 8.60
WEIGHT lb. (kg)

Weld End 76 (34)
Flanged End 124 (56)
8 TC1815
06/04 NP-5M
ASSEMBLY PART NUMBER
Flanged 3 - 10,000 RTJ
Weld 2 - 2.50 (65 mm) OD x 1.50 (40 mm) ID (2 in. (50 mm) XXH)
End Connection 4 - 3.00 (80 mm) OD x 2.00 (50 mm) ID
Body Configuration 5 - Weld 7 - Flanged
Stem Material 7 - 410 SS 8 - 17-4 PH SS
Assembly Gate/Wear Ring Material 2 - Steel/Steel 7 - 410 SS/410 SS 8 - 17-4 PH SS/ 410 SS
Base
Part Seat Ring Material 1 - 410 SS
Number
Seat/Seal Elastomer 2 - Viton/Viton 4 - HNBR/HNBR
J0XXXXX - XXXXXX0
Group 1 Basic valve. Designed in accordance with the methods in API 6A, 17th Edition, par 4.3.3. Hydrostatic shell test: 11,250 psi for 3 minutes.
Hydrosatic seat test: 7500 psi for 3 minutes, each side. Material traceability on body and bonnet.
Group 2 Same as Group 1 except: Hydrostatic shell test: 11,250 psi for 3 minutes, drop to 0 psi, 11,250 psi for 15 minutes. Test is charted.
Hydrostatic seat test: 7500 psi for 3 minutes, drop to 0 psi, 7500 for 15 minutes, drop to 0 psi, 300 psi for 5 minutes, each side.Test is charted.
Material traceability on body, bonnet, stem, gate and bolting. Impact tests at or below -50°F (-46°C) on body, bonnet, stem, housing
(2 in. (50 mm) & 3 in. (80 mm)), packing retainer (4 in. (100 mm) & 5 in. (127 mm)) and bolting. Surface NDE on body, bonnet and stem.
Group 3 Same as Group 2 plus volumetric NDE on body and bonnet.
PARTS LIST
Key VALVE SIZE 2 in. (50 mm) FP
No. Qty. DESCRIPTION GROUP NUMBER GROUP 1 GROUP 2 GROUP 3
Assembly Base Number Weld End and Flanged End, Short Lenth J024993 J025077 J025078
Flanged End, API Length J025130 - J025131
1 1 Lube Fitting Steel J005195
2 1 Handle Ductile Iron ASTM A536 Grade 65-45-12 2139712-01
4 1 Lock Handle AISI C-1213 J001891
*6 1 Stem Screw AISI C-1213 J001913
*7 1 Housing Seal Buna-N J005526-224
8 1 Screw Housing ASTM A350 Grade LF2 Class 1 J024982
*9 1 Stem 410 SS J024983-107
17-4 PH SS
*10 1 Secondary Seal Viton J005531-210
HNBR 2738507-08
11 1 Packing Retainer AISI C-1213 J001940 -
17-4 PH SS - J021432
*12 1 Stem Seal Assembly Viton J023231-006
(With Bronze Bushing - ASTM B505 Alloy 93200) HNBR J023231-008
13 1 Gate Clip AISI 302 SS M450480
*14 2 Body Wear Ring For Steel Gate, AISI 4140 w/QPQ Nitride Coating M452267
For SS Gate, AISI 410 Stainless Steel 2139647-02
*15 2 Wear Ring Seal Viton J005521-229
HNBR 2712425-03
16 1 Bonnet ASTM A487 Grade 4 Class D J024985-030 2140428-01 2140341-01
*18 1 Bonnet Seal Viton J005521-342
HNBR 2738507-10
*19 1 Gate Steel AISI 4140 w/QPQ Nitride Coating 2171111-01
410 SS 2139624-02
17-4 PH SS
20 1 Body Materials: Weld End - ASTM A487 Grade 4 Class D Consult Factory For
Flanged End - Fabricated From Weld End Body & AISI 4130 Flanges Body Part Numbers
*21 1 Seat 2139742-01
410 SS/HNBR Rings: AISI 410 SS, Elastomer: HNBR
410 SS/Viton Rings: AISI 410 SS, Elastomer: Viton
22 1 Cotter Pin Steel J005420-18728
23 2 Housing Stud J002066 J021436
Material ASTM A193 Grade B7 ASTM A193 Grade L7
24 2 Housing Stud Nut 2709000-08-01 J053252-034
Material ASTM A194 Grade 2H ASTM A194 Grade 7
25 4 Body Stud J015432 J021442
26 4 Body Stud Nut 2709000-10-01 J053252-038
* Recommended Spare Parts For One Year’s Service.

Consult Factory For Part Numbers Not Shown.
TC1815
06/04 NP-5M 9
7500 psi WP
23.00 (584) DIA
BRONZE BUSHING
24.60 (625)
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER
3.38 (86)

DIMENSION 7500 WP
A Weld End 13.00 (330)

Flanged End 24.38 (619)
FOR FLANGED ENDS

Flange ID 3.06 (78)
Flange OD 10.62 (270)
Flange Bolts (QTY. - SIZE in.) 8-1
WEIGHT lb. (kg)

Weld End 256 (116)
10 TC1815
06/04 NP-5M
End Connection 4 - 4.50 (114 mm) OD x 3.15 (80 mm) ID (4 in. (102 mm) XXH)
5 - 4.50 (114 mm) OD x 2.96 (75 mm) ID

Assembly Gate/Wear Ring Material 2 - Steel/Steel 7 - 410 SS/410 SS 8 - 17-4 PH SS/ 410 SS
Base
Number
J0XXXXX - XXXXXX0
Hydrostatic seat test: 7500 psi for 3 minutes, drop to 0 psi, 7500 for 15 minutes drop to 0 psi, 300 psi for 5 minutes, each side.Test is charted.
PARTS LIST
Assembly Base Number J025051 J025079 J025080
2 1 Handle Ductile Iron ASTM A536 Grade 65-45-12 2139481-01
3 1 Stem Tube Clear Acrylic J007459
4 1 Stem Cap Ductile Iron ASTM A536 Grade 65-45-12 J007411
5 1 Key Steel J005305-10016
*6 1 Stem Screw AISI C-1213 J007416
8 1 Housing ASTM A350 Grade LF2 Class 1 J007418 J021448-040
Materials AISI C 1029 Normalized ASTM A352 Grade LCC
*9 1 Stem 410 SS J024951-107
17-4 PH SS
HNBR 2738507-01
11 1 Packing Retainer J007413 J021434
Materials AISI C-1213 17-4 PH SS
(With Bronze Bushing - SAE 660) HNBR J001951-008
*13 2 Bearing TEFLON/Phenolic J007426
*15 2 Body Wear Ring For Steel Gate M452571
Material AISI 4140 w/QPQ Nitride Coating
For SS Gate 2139648-02
Material AISI 410 Stainless Steel
16 1 Bonnet ASTM A487 Grade 4 Class D J017289-029 2140370-01 2140370-02
HNBR 2738507-04
HNBR 2738507-12
*19 1 Gate - Steel/QPQ AISI 4140 w/QPQ Nitride Coating 2171112-01
410 SS 2139628-02
17-4 PH SS J024952-008
20 1 Body Materials: Weld End - ASTM A487 Grade 4 Class D Consult Factory For
Flanged End - Fabrication From Weld End Body & AISI 4130 Flanges Body Part Numbers
*21 1 Seat 410 SS/HNBR 2139744-01
Material Rings: AISI 410 SS, Elastomers: HNBR
410 SS/Viton
Material Rings: AISI 410 SS, Elastomers: Viton
23 2 Housing Stud J002072 J021441
24 2 Housing Stud Nut 2709000-09-01 J053252-036
25 12 Body Stud J015432 J021442
26 12 Body Stud Nut 2709000-10-01 J053252-038

TC1815
06/04 NP-5M 11
7500 psi WP
20.00 (508) DIA
BRONZE BUSHING
27.54 (700)
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER
4.40 (112)

DIMENSION 7500 WP
A Weld End 16.00 (406)

FOR FLANGED ENDS

Flange ID 4.06 (103)
Flange OD 12.44 (316)
Flange Bolts (QTY. - SIZE in.) 8 - 1 1/8
WEIGHT lb. (kg)

Weld End 310 (141)
12 TC1815
06/04 NP-5M
6 - 6.00 (152 mm) OD x 4.00 (102 mm) ID

Assembly Gate/Wear Ring Material 2 - Steel/Steel 8 - 17-4 PH SS/ 410 SS
Base
Number
J0XXXXX - XXXXXX0
PARTS LIST
1 1 Handwheel Ductile Iron ASTM A536 Grade 65-45-12 J015334
2 1 Handwheel Screw AISI C-1018 J014832
3 4 Retainer Screw J005665-32028 J005666-32028
Material Alloy Steel 18-8 SS
(With Bronze Bushing ASTM B271 Alloy C95500) HNBR J015853-008
*6 1 Stem 410 SS 2140684-01
17-4 Ph SS
7 1 Bonnet ASTM A487 Grade 4 Class D 2172523-01 2172523-02 2172523-03
8 10 Body Stud 2171976-11-01 2171978-11-01
Materials ASTM A193 Grade B7 ASTM A193 Grade L7
9 10 Body Stud Nut 2709000-11-01 J053252-140
HNBR 2738507-13
11 1 Body Materials: Weld End: ASTM A487 Grade 4 Class D Consult Factory For
Flanged End: Fabricated From Weld End Body & AISI 4130 Flanges Body Part Numbers
*12 1 Seat 410 SS/HNBR 2139746-01
Material Rings: AISI 410 Stainless Steel, Elastomers: HNBR
410 SS/Viton
Material Rings: AISI 410 Stainless Steel, Elastomers: Viton
410 SS 2139637-02
17-4 PH SS
For Stainless Steel Gate 2139649-02
HNBR 2738507-11
*18 1 Stem Screw with Bearings J023888
Material Stem Screw: AISI C-1018
Bearings: Hardened Steel Needle Thrust Bearings
19 1 Housing AISI C-1018 J015332
HNBR 2738507-09
*21 1 Packing Retainer J015330 2172425-02
Material AISI C-1018 AISI 4130
22 4 Housing Screw Steel SAE Grade 5 702500-14-00-34
24 1 Stem Cap Ductile Iron J015855
26 1 Relief Fitting Steel J051971
TC1815
06/04 NP-5M 13
7500 psi WP
5 3/16 in. (132 mm) FULL PORT
24.00 (610) DIA
BRONZE BUSHING
31.81 (808)
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER
5.00 (127)

VALVE SIZE 5 3/16 in. (132 mm) FP
DIMENSION 7500 WP
A Weld End 17.88 (454)

FOR FLANGED ENDS

Flange ID 5.12 (130)
Flange OD 14.06 (357)
WEIGHT lb. (kg)

Weld End 506 (230)
14 TC1815
06/04 NP-5M
Flanged 3- 10,000 RTJ

Assembly Gate/Wear Ring Material 2 - Steel/Steel 8 - 17-4 PH SS/ 410 SS
Base
Number
J0XXXXX - XXXXXX0
PARTS LIST
Key VALVE SIZE 5 3/16 in. (132 mm) FP
2 1 Handwheel Screw AISI C-1018 J016987
3 4 Retainer Screw J005665-32028 J005666-32028
Material Alloy Steel 18-8 SS
(With Bronze Bushing ASTM B271 Alloy C95500) HNBR J016995-008
*6 1 Stem 410 SS J024943-107
17-4 Ph SS
7 1 Bonnet ASTM A487 Grade 4 Class D J024956-030 J024956-051 J024956-052
8 12 Body Stud 2171976-12-01 2171978-12-02
Materials ASTM A193 Grade B7 ASTM A193 Grade L7
9 12 Body Stud Nut 2709000-12-01 J053252-142
HNBR 2738507-05
11 1 Body Materials: Weld End: ASTM A487 Grade 4 Class D Consult Factory For
Flanged End: Fabricated From Weld End Body & AISI 4130 Flanges Body Part Numbers
*12 1 Seat 410 SS/HNBR 2139748-01
Material Rings: AISI 410 Stainless Steel, Elastomer: HNBR
410 SS/Viton
Material Rings: AISI 410 Stainless Steel, Elastomer: Viton
410 SS 2139629-02
17-4 PH SS J024957-008
*14 1 Housing Seal Urethane 2726191-02-95
For Stainless Steel Gate 2139650-02
HNBR 2738507-06
*18 1 Stem Screw with Bearings J023848
Material Stem Screw: AISI C-1018
Bearings: Hardened Steel Needle Thrust Bearings
19 1 Housing AISI C-1018 J018190
HNBR 2738507-02
*21 1 Packing Retainer J018191 2171930-01
Material AISI C-1018 AISI 4130
22 4 Housing Screw Steel SAE Grade 5 702500-16-00-40
24 1 Stem Cap Ductile Iron J018193

TC1815
06/04 NP-5M 15
2000, 3000 & 5000 psi WP
2 1/2 in. (65 mm) REDUCED PORT
14.00 (356) DIA
BRONZE BUSHING 13.00 (330) OPEN
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER
2.00
(51)
2.62 (67)

VALVE SIZE 2 in. (50 mm) FP & 2 1/2 in. x 2 in. (65 mm x 50 mm) RP*
DIMENSION 2000 WP - 4000 TEST 3000 WP - 6000 TEST 5000 WP - 7500 TEST
A Threaded, Weld and Grooved 9.00 (229) 9.00 (229) 9.00 (229) 9.00 (229) 9.00 (229) 9.00 (229)
Flanged - RTJ 11.62 (295) - 11.62 (295) - 12.12 (308) -
Flange OD 6.50 (165) - 8.50 (216) - 8.50 (216) -

Flange Bolts (QTY. - SIZE in.) 8 - 5/8 - 8 - 7/8 - 8 - 7/8 -
Ring Number (RTJ) R-23 - R-24 - R-24 -
WEIGHT lb. (kg)

Threaded, Weld, Grooved 56 (25) 56 (25) 58 (26) 58 (26) 58 (26) 58 (26)
Flanged 70 (32) 70 (32) 100 (45) 100 (45) 110 (50) 110 (50)
* 2 1/2 in. x 2 in. (65 mm x 50 mm) RP Only Available in Threaded, Weld and Grooved End.
16 TC1815
06/04 NP-5M
Flanged 0 - 2000 RTJ 1 - 3000 RTJ 2 - 5000 RTJ
Threaded 0 - LP 2 - UPTBG
Grooved 0 - Sch 80
Weld 0 - Sch 40 1 - Sch 80 2 - XXH 5 - Sch 160
End Connection Pipe Standard Weld End Suffixes
Size 2000 psi 3000 psi 5000 psi
2 in. (50 mm) 0&1 1&5 1, 2 & 5
2 1/2 in. (65 mm) 0&1 1&5 1, 2 & 5
Body Configuration 4 - Threaded 5 - Weld 6 - Grooved (2000 only) 7 - Flanged
Stem Material 2 - 303 SS 8 - 316 SS
Gate Material* 2 - Steel 8 - 316 SS
Insert Material* 1 - Ductile Iron 8 - 316 SS
1 - Buna-N/Buna-N
Seat/Seal Elastomer 2 - Viton/Viton
Assembly 3 - Hypalon/Buna-N
Base
Part Coating 0 - Uncoated 1 - DEMCO 10
Number 4 - DEMCO 11 5 - DEMCO 12
WELD END BODIES ARE NOT COATED

XXXXXXX - XXXXXXX
*Consult Factory For Additional Trim Options.
PARTS LIST
Key VALVE SIZE 2 in. (50 mm) FP & 2 1/2 in. (65 mm) RP
No. Qty. DESCRIPTION 2000 WP 3000 WP 5000 WP
Assembly Base Part Number 2 in. (50 mm) Full Port Threaded J001026 J001027 J001028
- Weld J001029 J001030 J001031
- Grooved J011920 - -
- Flanged J001023 J001024 J001025
2 1/2 in. (65 mm) Reduced Port - Weld J001115 J001114 J001109
1 1 Lube Fitting Steel J005195 J005195 J005195
2 1 Handle ASTM A536 Ductile Iron 2139712-01 2139712-01 2139712-01
4 1 Lock handle C-1213 J001891 J001891 J001891
*6 1 Stem Screw C-1213 J001913 J001913 J001913
*7 1 Stem Screw Seal Buna-N J005526-224 J005526-224 J005526-224
8 1 Screw Housing C-1018 J001848 J001848 J001848
*9 1 Stem 303 SS -002, 316 SS -008 J001931-XXX J001931-XXX J001931-XXX
*10 1 Secondary Seal Buna-N J005526-210 J005526-210 J005526-210
11 1 Retainer C-1213 J001940 J001940 J001940
*12 1 Stem Seal Assembly Buna-N -001, Viton -006 J001949-XXX J001949-XXX J001949-XXX
13 1 Lock Screw Steel J005665-22004 J005665-22004 J005665-22004
15 1 Coupling A216 Steel -020, A487 Steel -030 J001446-020 J001446-020 J001445-030
16 1 Bonnet ASTM A105 J001237-XXX J001237-XXX J001237-XXX
Coatings Uncoated -020, Coated DEMCO 10 -021, DEMCO 11 -024, DEMCO 12 -025
17 1 Index Pin Steel J001981 J001981 J001981
**18 1 Bonnet Seal Buna-N J005526-342 J005526-342 J005526-342
Viton J005531-342 J005531-342 J005531-342
**19 1 Gate J001887-XXX J001887-XXX J001887-XXX
Materials AISI 1045 Nickel Plated -002, Cast SS ASTM A351 Grade CF8M -008
20 1 Body Materials:
Threaded, Weld & Grooved - ASTM A105 Normalized
2000 Flanged - Fabricated from Weld Body and
Commercial Flanges Consult Factory For
3000 Flanged - ASTM A216 Grade WCB Body Part Numbers
5000 Flanged - ASTM A487 Grade 4A or 2B
Coatings (Except Weld End Bodies):
DEMCO 10, DEMCO 11, DEMCO 12
**21 1 Seat Assembly J001876-0XX J001876-0XX J001876-0XX
Materials Inserts: -01X Ductile Iron ASTM A395 or Steel AISI C1040
-08X 316 SS ASTM A351 Grade CF8M Annealed
Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 Hypalon
22 1 Pin, Lock Handle Steel J005420-18728 J005420-18728 J005420-18728
* Major Repair Kit J025091-10221 - One Each For One Year’s Service.
** Minor Repair Kit J025091-00221.
TC1815
06/04 NP-5M 17
2000, 3000 & 5000 psi WP
2 1/2 in. (65 mm) & 3 in. (80 mm) FULL PORT
4 in. (100 mm) REDUCED PORT
BRONZE BUSHING
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER

FP RP FP RP
VALVE SIZE in. (mm) 2 1/2 (65) 3 (80) 2 1/2 (65) 3 (80) 4 x 3 (100 x 80) 3 (80) 4 x 3 (100 x 80)
DIMENSION 2000 WP - 4000 TEST 3000 WP - 6000 TEST 5000 WP - 7500 TEST
A Threaded, Weld & Grooved 9.75 (248) 11.00 (279) 9.75 (248) 11.00 (279) 11.00 (279) 11.00 (279) 11.00 (279)
Flanged - RTJ 16.62 (422) 14.12 (359) 16.62 (422) 14.12 (359) - 15.62 (397) -
B (Open) 17.00 (432) 18.00 (457) 17.00 (432) 18.00 (457) 18.00 (457) 18.00 (457) 18.00 (457)
C (Seat Bore) 2.50 (64) 3.00 (76) 2.50 (64) 3.00 (76) 3.00 (76) 3.00 (76) 3.00 (76)
D 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483)
E Threaded, Weld & Grooved 3.12 (79) 3.50 (89) 3.25 (83) 3.69 (94) 3.69 (94) 3.94 (100) 3.94 (100)
Flanged - RTJ 3.19 (81) 3.50 (89) 3.19 (81) 3.69 (94) - 3.94 (100) -
Flange OD 7.50 (191) 8.25 (210) 9.62 (244) 9.50 ( 241) - 10.50 (267) -
Flange Bolts (QTY. - SIZE in.) 8 - 3/4 8 - 3/4 8-1 8 - 7/8 - 8 - 1 1/8 -
Ring Number (RTJ) R-26 R-31 R-27 R-31 - R-35 -
WEIGHT lb. (kg)

Threaded, Weld & Grooved 74 (34) 95 (43) 87 (39) 113 (51) 113 (51) 140 (64) 140 (64)
Flanged 141 (64) 131 (59) 170 (77) 175 (79) - 241 (109) -
18 TC1815
06/04 NP-5M
ASSEMBLY PART NUMBERS
Flanged 0 - 2000 RTJ 1 - 3000 RTJ 2 - 5000 RTJ
Threaded 0 - LP
1 - TBG (3 in. (80 mm) Full Port Only)
2 - UPTBG (2 1/2 in. (65 mm) Full Port Only)
Grooved 0 - Sch 80 (2000 Only)
Size 2000 psi 3000 psi 5000 psi
2 1/2 in. (65 mm) 0&1 1&5 -
3 in. (80 mm) 0&1 1&5 1, 2 & 5
4 in. (100 mm) 0&1 1&5 1, 2 & 5
Insert Material* 1 - Ductile Iron or Steel 8 - 316 SS
1 - Buna-N/Buna-N
Assembly Seat/Seal Elastomer 2 - Viton/Viton
Base 3 - Hypalon/Buna-N
Part
Number Coating 0 - Uncoated 1 - DEMCO 10
4 - DEMCO 11 5 - DEMCO 12
XXXXXXX - XXXXXXX
PARTS LIST
Key VALVE SIZE 2 1/2 in. (65 mm) FP 3 in. (80 mm) FP & 4 in. (100 mm) RP
No. Qty. DESCRIPTION 2000 WP 3000 WP 5000 WP 2000 WP 3000 WP 5000 WP
Assembly 2 1/2 & 3 Full Port - Threaded J001042 - J001043 J001045 J001046 J001047
- Weld J001051 - J001052 J001054 J001055 J001056
- Grooved J011921 - - J011922 - -
- Flanged - J001033 J001034 J001036 J001037 J001038
4 in. Reduced Port - Weld - - - - J001113 J001110
1 1 Lube Fitting Steel J005195 J005195 J005195 J005195 J005195 J005195
2 1 Hub Assembly ASTM A536 Ductile Iron 2139713-01 2139713-01 2139713-01 2139713-01 2139713-01 2139713-01
4 1 Lock Handle AISI C1213 J001892 J001892 J001892 J001892 J001892 J001892
* 6 1 Stem Screw AISI C1213 J001914-002 J001914-002 J001914-002 J001914-003 J001914-003 J001914-003
* 7 1 Stem Screw Seal Buna-N J005526-226 J005526-226 J005526-226 J005526-226 J005526-226 J005526-226
8 1 Screw Housing Carbon Steel J001852 J001852 J001852 J001852 J001852 J001852
* 9 1 Stem 303 SS - 002, 316 SS -008 J001932-XXX J001932-XXX J001932-XXX J001932-XXX J001932-XXX J001932-XXX
*10 1 Secondary Seal Buna-N J005526-212 J005526-212 J005526-212 J005526-212 J005526-212 J005526-212
11 1 Retainer AISI C1213 J001941 J001941 J001941 J001941 J001941 J001941
*12 1 Stem Seal Assembly Buna-N -001, Viton -006 J001950-XXX J001950-XXX J001950-XXX J001950-XXX J001950-XXX J001959-XXX
16 1 Bonnet Cast Steel ASTM A487 4A or 2B J001970-XXX J001974-XXX J001974-XXX J001971-XXX J001976-XXX J001980-XXX
**18 1 Bonnet Seal Buna-N J005526-427 J005526-427 J005526-427 J005526-431 J005526-433 J005526-433
Viton J005531-427 J005531-427 J005531-427 J005531-431 J005531-433 J005531-433
**19 1 Gate J001868-00X J001868-00X J001868-00X J001886-00X J001886-00X J001886-00X
Materials AISI 4140 Nickel Plated -002, Cast SS ASTM A351 Grade CF8M -008
ASTM A487 Grade 4 Class A or Grade 2 Class B Consult Factory For
Coatings (Except Weld End Bodies): Body Part Numbers
**21 1 Seat Assembly J001877-0XX J001877-0XX J001877-0XX J001878-0XX J001878-0XX J001878-0XX
Materials Inserts: -001 Ductile Iron ASTM A395 or Steel AISI C1040
-008 316 SS ASTM A351 Grade CF8M Annealed
22 1 Pin, Lock Handle Steel J005420-18732 J005420-18732 J005420-18732 J005420-18732 J005420-18732 J005420-18732
23 2 Bonnet Stud ASTM A193 Grade B7 J002066 J002066 J002066 J002066 J002066 J002066
24 2 Bonnet Stud Nut ASTM A194 Grade 2H 2709000-08-01 2709000-08-01 2709000-08-01 2709000-08-01 2709000-08-01 2709000-08-01
25 4 Body Stud ASTM A193 Grade B7 J002072 J002074 J002074 J002072 J002074 J002076
26 4 Body Stud Nut ASTM A194 Grade 2H 2709000-09-01 2709000-10-01 2709000-10-01 2709000-09-01 2709000-10-01 2709000-13-01
TC1815
06/04 NP-5M 19
2000 & 3000 psi WP
BRONZE BUSHING
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER

VALVE SIZE 4 in. (100 mm) FP 4 in. (100 mm) FP 5 in. x 4 in. (125 mm x 100 mm) RP
DIMENSION 2000 WP - 4000 TEST 3000 WP - 6000 TEST
A Threaded, Weld & Grooved 13.00 (330) 13.00 (330) 13.00 (330)
Flanged - RTJ 16.38 (416) 16.38 (416) -
B (Open) 21.25 (540) 21.25 (540) 21.25 (540)
C (Seat Bore) 4.00 (102) 4.00 (102) 4.00 (102)
D 23.00 (584) 23.00 (584) 23.00 (584)
E Threaded, Weld & Grooved 4.31 (109) 4.56 (116) 4.56 (116)
Flanged - RTJ 4.31 (109) 4.56 (116) -
Flange OD 10.75 (274) 11.50 (292) -

Flange Bolts (QTY. - SIZE in.) 8 - 7/8 8 - 1 1/8 -
Ring Number (RTJ) R-37 R-37 -
WEIGHT lb. (kg)

Threaded, Weld & Grooved 140 (64) 162 (73) 162 (73)
Flanged 200 (91) 265 (120) -
20 TC1815
06/04 NP-5M
Flanged 0 - 2000 RTJ 1 - 3000 RTJ
Threaded 0 - LP 3 - LCSG
Grooved 0 - Sch 80
Size 2000 psi 3000 psi
4 in. (100 mm) 0&1 1&5
5 in. (125 mm) - 1&5
Insert Material* 1 - Steel 8 - 316 SS
1 - Buna-N/Buna-N
Seat/Seal Elastomer 2 - Viton/Viton
Assembly 3 - Hypalon/Buna-N
Base
Part Coating 0 - Uncoated 1 - DEMCO 10
Number 4 - DEMCO 11 5 - DEMCO 12

XXXXXXX - XXXXXXX
PARTS LIST
Key VALVE SIZE 4 in. (100 mm) FP• 4 in. (100 mm) FP & 5 in. (125 mm) RP
No. Qty. DESCRIPTION 2000 WP 3000 WP
Assembly 4 in. Full Port - Threaded J001048 J001049
- Weld J001057 J001058
- Grooved J011923 -
- Flanged J001039 J001040
5 in. Reduced Port - Weld - J001111
1 1 Lube Fitting Steel J005195 J005195
2 1 Hub Assembly ASTM A536 Ductile Iron 2139714-01 2139714-01
4 1 Lock Handle C-1213 J001897 J001897
*6 1 Stem Screw C-1213 J001915 J001915
*7 1 Stem Screw Seal Buna-N J005526-227 J005526-227
8 1 Screw Housing Carbon Steel J001958 J001958
*9 1 Stem 303 SS -002, 316 SS -008 J001933-XXX J001933-XXX
*10 1 Secondary Seal Buna-N J005526-214 J005526-214
11 1 Retainer C-1213 J001942 J001942
*12 1 Stem Seal Assembly Buna-N -001, Viton -006 J001951-XXX J001951-XXX
16 1 Bonnet Cast Steel ASTM A487 4A or 2B J001972-XXX J001977-XXX
**18 1 Bonnet Seal Buna-N J005526-438 J005526-439
Viton J005531-438 J005531-439
**19 1 Gate J001926-00X J001926-00X
Materials AISI 4140 Nickel Plated -002
Cast SS ASTM A351 Grade CF8M Annealed -008
*21 1 Seat Assembly J002207-0XX J002207-0XX
Material Inserts: -02X Steel AISI 1040
22 1 Pin, Lock Handle Steel J005420-18732 J005420-18732
23 2 Bonnet Stud ASTM A193 Grade B7 J002072 J002072
24 2 Bonnet Stud Nut ASTM A194 Grade 2H 2709000-09-01 2709000-09-01
25 4 Body Stud ASTM A193 Grade B7 J002074 ***J024500
26 4 Body Stud Nut ASTM A194 Grade 2H 2709000-10-01 ***2709000-12-01
*** Valves made prior to 1994 may use 7 Pitch Stud J002075 and Nut J053251-042
• Available as 4 1/16 in. (103 mm) Casing Thread 2000 WP-J025020-4422110; 3000 WP-J024968-4422110. TC1815
06/04 NP-5M 21
5000 psi WP - 4 BOLT BONNET DESIGN
5 in. (125 mm) & 6 in. (150 mm) REDUCED PORT
23.00 (584) DIA
BRONZE BUSHING
24.56 (624)
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER
4.00 (102)
4.56 (116)

VALVE SIZE 4 in. (100 mm) FP 5 in. x 4 in. (125 mm x 100 mm) & 6 in. x 4 in. (150 mm x 100 mm) RP
A Threaded & Weld 13.00 (330) 13.00 (330)
TURNS TO OPEN 23 23
WEIGHT lb. (kg) 210 (95) 210 (95)
22 TC1815
06/04 NP-5M
Weld 1 - Sch 80 2 - XXH 5 - Sch 160
End Connection
Body Configuration 4 - Threaded 5 - Weld 7 - Flanged
1 - Buna-N/Buna-N
Part 9 - 90 Durometer Buna-N/90 Durometer Buna-N
Number
Coating 0 - Uncoated 1 - DEMCO 10 4 - DEMCO 11 5 - DEMCO 12

XXXXXXX - XXXXXXX
PARTS LIST
Key VALVE SIZE 4 in. (100 mm) FP 5 in. (125 mm) & 6 in. (150 mm) RP
No. Qty. DESCRIPTION 5000 WP - 7500 TEST
Assembly Base Number 4 in. Full Port J007420 J007420
5 in. Reduced Port - Weld J007421 J007421
2 1 Handle ASTM A536 Ductile Iron 2139481-01 2139481-01
3 1 Tube Clear Acrylic J007459 J007459
4 1 Stem Cap ASTM A536 Ductile Iron J007411 J007411
*5 1 Key Steel J005305-10016 J005305-10016
*6 1 Stem Screw C-1213 J007416 J007416
8 1 Screw Housing C-1029 J007418 J007418
11 1 Retainer C-1213 J007413 J007413
*12 1 Stem Seal Assembly Buna-N J001951-001 J001951-001
Viton J001951-006 J001951-006
90 Durometer Buna-N J022093-001 J022093-001
*13 2 Bearing TEFLON/Phenolic J007426 J007426
14 1 Downstop Ring 303 SS J007417 J007417
16 1 Bonnet ASTM A487 Grade 4 Class C or Grade 2 Class B J007419-XXX J007419-XXX
Viton J005531-439 J005531-439
**19 1 Gate J001926-00X J001926-00X
ASTM A351 Grade CF8M -008
**21 1 Seat Assembly J002207-0XX J002207-0XX
Materials Inserts: -02X Steel AISI 1040
Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 Hypalon, -0X9 90 Durometer Buna-N
25 4 Body Stud ASTM A193 Grade B7 J002077 J002077
26 4 Body Stud Nut ASTM A194 Grade 2H J001890 J001890
** Minor Repair Kit J025091-01421
TC1815
06/04 NP-5M 23
5000 psi WP - 12 BOLT BONNET DESIGN
5 in. (125 mm) & 6 in. (150 mm) REDUCED PORT
23.00 (584) DIA
BRONZE BUSHING
24.62 (625)
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER
4.00 (102)
4.69 (119)

VALVE SIZE 4 in. (100 mm) FP 5 in. x 4 in. (125 mm x 100 mm) & 6 in. x 4 in. (150 mm x 100 mm) RP
A Threaded & Weld 13.00 (330) 13.00 (330)
Flanged - RTJ 18.00 (457) -
Flange O.D. 12.25 (274) -

Flange Bolts (QTY. - SIZE in.) 8 - 1 1/4 -
Ring Number (RTJ) R-39 -
TURNS TO OPEN 23 23
WEIGHT lb. (kg)

Threaded & Weld 210 (95) 210 (95)
Flanged 330 (150) 330 (150)
24 TC1815
06/04 NP-5M
Flanged 2 - 5000 RTJ
Weld 1 - Sch 80 2 - XXH 5 - Sch - 160
End Connection
1 - Buna-N/Buna-N
Part 9 - 90 Durometer Buna-N/90 Durometer Buna-N
Number

XXXXXXX - XXXXXXX
PARTS LIST
Key VALVE SIZE 4 in. (100 mm) FP 5 in. (125 mm) & 6 in. (150 mm) RP
No. Qty. DESCRIPTION 5000 WP - 7500 TEST
Assembly Base Number 4 in. Full Port J017263 J017263
2 1 Handle ASTM A536 Ductile Iron 2139481-01 2139481-01
3 1 Tube Clear Acrylic J007459 J007459
4 1 Stem Cap ASTM A536 Ductile Iron J007411 J007411
*5 1 Key Steel J005305-10016 J005305-10016
*6 1 Stem Screw C-1213 J007416 J007416
8 1 Screw Housing C-1029 J007418 J007418
11 1 Retainer C-1213 J007413 J007413
*12 1 Stem Seal Assembly Buna-N J001951-001 J001951-001
Viton J001951-006 J001951-006
90 Durometer Buna-N J022093-001 J022093-001
*13 2 Bearing TEFLON/Phenolic J007426 J007426
14 1 Downstop Ring 303 SS J007417 J007417
16 1 Bonnet ASTM A487 Grade 4 Class C J017289-XXX J017289-XXX
Viton J005531-361 J005531-361
**19 1 Gate J001926-00X J001926-00X
ASTM A351 Grade CF8M Annealed -008
ASTM A487 Grade 4 Class A Consult Factory For
**21 1 Seat Assembly J002207-0XX J002207-0XX
Materials Inserts: -02X Steel AISI 1040
Elastomers: -0X1 Buna-N, -0X2 Viton, -0X3 Hypalon, -0X9 90 Durometer Buna-N
25 12 Body Stud ASTM A193 Grade B7 J015432 J015432
26 12 Body Stud Nut ASTM A194 Grade 2H 2709000-10-01 2709000-10-01
** Minor Repair Kit J025091-01421
TC1815
06/04 NP-5M 25
1000 psi WP
23.00 (584)
BRONZE BUSHING
FLAT TOP FOLLOWER
24.8 (630)
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER
5.00 (127)

DIMENSION 1000 WP - 2000 TEST
A Threaded 16 00 (406)
WEIGHT lb. (kg)

Threaded 210 (95)
26 TC1815
06/04 NP-5M
End Connection 3 - Long Casing
Body Configuration 4 - Threaded
Gate Material 2 - Steel 8 - 316 SS
Insert Material 1 - Steel 8 - 316 SS
Assembly Seat/Seal Elastomer 1 - Buna-N/Buna-N

Base 2 - Viton/Viton
Part
Number
Coating 0 - Uncoated
J022401 - 34 XXXX0
PARTS LIST
No. Qty. DESCRIPTION CLASS 1000 WP
Assembly Base Part Number J022401
2 1 Hub Assembly ASTM A395 Ductile Iron 2139714-01
4 1 Lock Handle C1213 J001897
6 1 Stem Screw C1213 J022390
7 1 Stem Screw Seal Buna-N J005526-227
8 1 Screw Housing ASTM A216 Grade WCB J022388
9 1 Stem 303 SS J022389-002
316 SS J022389-008
10 1 Secondary Seal Buna-N J005526-214
11 1 Retainer C1213 J001942
*12 1 Stem Seal Assembly Buna-N J001951-001
Viton J001951-006
16 1 Bonnet ASTM A216 Grade WCB J022386-020
*18 1 Bonnet Seal Buna-N J005526-367
Viton J005531-367
*19 1 Gate AISI C1045 Nickel Plated J021952-002
ASTM A351 Grade CF8M J021952-008
20 1 Body - Threaded Consult Factory For Body Part Number
Material ASTM A216 Grade WCB
*21 1 Seat Assembly J021948-0XX
Materials Inserts: - 01X Steel ASTM A487 Grade 4 Class A
-08X 316 SS ASTM A351 Grade CF8M
Elastomers: -0X1 Buna-N, -0X2 Viton
22 1 Pin, Lock Handle Steel J005420-18732
23 4 Bonnet Screw Steel SAE Grade 2 J005650-32028
25 8 Body Stud ASTM A193 Grade B7 J007502
26 8 Body Stud Nut ASTM A194 Grade 2H 2709000-08-01
* Recommended Spare Parts - One Each For One Year’s Service.
TC1815
06/04 NP-5M 27
3000 & 5000 psi WP
20.00 (508) DIA
BRONZE BUSHING 24.56 (624)
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER
4.00 (102)

VALVE SIZE 5 1/8 in. (130 mm) FP & 6 in. x 5 in. (150 mm x 125 mm) RP
DIMENSION 3000 & 5000 WP - 6000 & 7500 TEST
A Threaded & Weld 16 00 (406)
WEIGHT lb. (kg) 335 (152)
28 TC1815
06/04 NP-5M
Weld 2 - XXH (6 in. (150 mm) Reduced Port Only)
5 - Sch 160 (6 in. (150 mm) Reduced Port Only)
End Connection Threaded 3 - Long Casing (5 in. (125 mm) Full Port Only)
Body Configuration 4 - Threaded 5 - Weld
Stem Material 2 - 303 SS (3000 WP Only) 8 - 17-4 PH SS
Gate Material 2 - Steel 8 - 316 SS (3000 WP Only)
Insert Material 1 - Steel 8 - 316 SS (3000 WP Only)
Assembly Seat/Seal Elastomer 1 - Buna-N/Buna-N

Base 2 - Viton/Viton
Part
Number

XXXXX - XXXXXXX
PARTS LIST
Key VALVE SIZE 5 1/8 in. (130 mm) FP 6 in. (150 mm) RP
No. Qty. DESCRIPTION RATING 3000 WP - 6000 TEST 5000 WP - 7500 TEST
Assembly Base Number Full Port - Threaded J021954 J023925
Reduced Port - Weld - J025086
2 1 Screw - Handwheel Steel AISI C1018 J014832
3 4 Screw - Retainer Alloy Steel J005665-32028
4 1 Downstop Ring Steel AISI C1018 J021942
*5 1 Stem Seal Assembly w/Bushing -001 Buna-N -006 Viton J015853-00X
6 1 Stem -002 303 SS -009 17-4 pH SS J021943-00X J021943-009
7 1 Bonnet Cast Steel ASTM A487 Grade 4 Class C J021944-03X
8 12 Body Stud Steel ASTM A193 Grade B7 J015432
9 12 Body Stud Nut Steel ASTM A194 Grade 2H 2709000-10-01
Viton J005531-367
ASTM A487 Grade 4 Class A Consult Factory For
*12 1 Seat Assembly J021948-011 J021948-019
J021948-012 -
J021948-081 -
J021948-082 -
Materials Inserts: -01X Steel AISI 1040, -08X 316 SS (3000 WP Only)
Elastomers: -0X1 Buna-N, -0X2 Viton, -0X9 90 Duro Buna-N
*13 1 Gate -002 Steel AISI 4140 Nickel Plated, -008 316 SS (3000 WP Only) J021952-00X J021952-002
14 1 Stem Screw Seal Buna-N J005526-228
18 1 Stem Screw w/Bearings Steel AISI C1018, Steel Bearings J023888 -
AL. BRZ. ASTM B148 Alloy 955, Steel Bearings - J024526
19 1 Housing Steel AISI C1018 J015332
20 1 Secondary Seal Buna-N J005526-216
21 1 Retainer Steel AISI C1018 J015330
22 4 Screw - Housing Steel J005650-32056
23 1 Tube Clear Acrylic J012852
24 1 Stem Cap Ductile Iron ASTM A536 Grade 65-45-12 J015855
26 1 Relief Fitting Steel J051971
TC1815
06/04 NP-5M 29
ASME/ANSI CLASS 400 & 600
1 1/2 in. & 2 in. (40 mm & 50 mm) FULL PORT
DIMENSIONAL DATA
VALVE SIZE 1 1/2 in. (40 mm) FP 2 in. (50 mm) FP 2 in. (50 mm) FP
2 in. x 1 1/2 in. (50 mm x 40 mm) RP
DIMENSION ASME CLASS 600 400 600
A Full Port - Threaded, Weld, Grooved 7.75 (197) 8.88 (226) 8.88 (226)
Reduced Port - Threaded - - 7.75 (197)
Flanged - RF - 11.50 (292) 11.50 (292)
Flanged - RTJ - 11.62 (295) 11.62 (295)
B (Open) - Full Port 7.75 (197) 8.75 (222) 8.75 (222)

(Open) - Reduced Port - - 7.75 (197)
C (Seat Bore) - Full Port 1.62 (41) 2.00 (50) 2.00 (50)
(Seat Bore) - Reduced Port - - 1.62 (41)
D Full Port 9.50 (241) 11.00 (279) 11.00 (279)

Reduced Port - - 9.50 (241)
E Full Port 2.00 (50) 2.19 (56) 2.19 (56)

Reduced Port - - 2.00 (50)
F Flange OD - 6.50 (165) 6.50 (165)

Flange Bolts (QTY. - SIZE in.) - 8 - 5/8 8 - 5/8
Ring Number (RTJ) - R-23 R-23
WEIGHT lb. (kg)

Full Port - Threaded, Weld, Grooved 20 (9) 24 (11) 26 (12)
Reduced Port - Threaded - - 20 (9)
Full Port - Flanged - 42 (19) 44 (20)
Reduced Port - Flanged - - 40 (18)
30 TC1815
06/04 NP-5M
Flanged 0 - 400 RTJ 1 - 400 RF 2 - 600 RTJ 3 - 600 RF
Threaded 0 - API LP 1 - TBG 2 - UPTBG
Grooved 0 - Sch 80
Weld 0 - Sch 40
End Connection
Body Configuration 4 - Threaded 5 - Weld 6 - Grooved 7 - Flanged
Insert Material* 1 - Ductile Iron or Steel

8 - 316 SS
Seat/ Seal Elastomer 1 - Buna-N/Buna-N

2 - Viton/Viton
3 - Hypalon/Buna-N
Assembly
Base Coating 1 - DEMCO 10 4 - DEMCO 11 5 - DEMCO 12
Part
Number WELD END BODIES ARE NOT COATED
J00XXXX - XXXXXXX
PARTS LIST
Key VALVE SIZE 1 1/2 in. (40 mm) FP 2 in. (50 mm) FP 2 in. (50 mm) FP
2 in. x 1 1/2 in. RP
(50 mm x 40 mm) RP
No. Qty. DESCRIPTION ASME CLASS 600 400 600
Assembly Base Part Number Full - Threaded J003938 J001071 J001072
Weld - J001091 J001092
Grooved - J001081 J001082
Flanged - J001061 J001062
Reduced - Threaded J003939 - -
1 1 Handle Ductile Iron ASTM A536 Grade 65-45-12 J004375 J001276 J001276
2 1 Stem Pin Spring Steel J005445-25020 J005445-37528 J005445-37528
3 1 Lube Fitting Steel J005195 J005195 J005195
4 1 Back-Up Ring Chrome Leather J005532-115 J005532-211 J005532-211
5 1 Stem Seal Buna-N J005526-115 J005526-211 J005526-211
Viton J005531-115 J005531-211 J005531-211
6 1 Stem 303 SS -002, 316 SS -008 J004376-XXX J001279-XXX J001279-XXX
7 1 Bonnet Ductile Iron ASTM A395 - J001277-01X -
Steel ASTM A216 Grade WCB J004330-02X - J001277-02X
Coatings Uncoated -0X0, Coated DEMCO 10 -0X1, DEMCO 11 -0X4, DEMCO 12, -0X5
8 4 Body Screw SAE Grade 5 J005651-32024 J005651-32024 J005651-32024
10 1 Bonnet Seal Buna-N J005526-234 J005526-239 J005526-239
Viton J005531-234 J005531-239 J005531-239
2 in. (50 mm) Full Class 400 Threaded, Grooved
and Flanged: Ductile Iron ASTM A395
2 in. (50) Full Class 600 Threaded, Weld, and Consult Factory For
Grooved: Forged Steel AISI C1029 Normalized Body Part Numbers
All Others: Steel, ASTM A216 Grade WCB
Coatings (Exept Weld End Bodies):
12 1 Seat J004081-0XX J001876-0XX J001876-0XX
Materials Inserts: -01X Ductile Iron ASTM A395 or Steel AISI 1040
-08X Stainless Steel ASTM A351 Grade CF8M Annealed
13 1 Gate J004393-00X J001275-00X J001275-00X
Materials: -002 Steel, Nickel Plated AISI C1144 AISI C1045 AISI C1045
-008 Stainless Steel AISI 316 Annealed ASTM A351 CF8M Annealed
TC1815
06/04 NP-5M 31
ASME/ANSI CLASS 400 & 600
2 1/2 in. (65 mm) THROUGH 6 in. (150 mm) FULL PORT
DIMENSIONAL DATA
VALVE SIZE in. (mm) 2 1/2 (65) FP 3 (80) FP 4 (100) FP 6 (150) FP 8 x 6 (200 x 150) RP
DIMENSION ASME CLASS 400 & 600 400 & 600 400 600 400 600 600
A Threaded, Weld, Grooved 10.00 (254) 10.25 (260) 11.88 (302) 11.88 (302) 15.50 (394) 15.50 (394) -
Flanged - RF 13.00 (330) 14.00 (356) - 17.00 (432) 19.50 (495) 22.00 (559) 26.00 (660)
Flanged - RTJ 13.12 (333) 14.12 (359) - 17.12 (435) 19.62 (498) 22.12 (562) 26.12 (663)
B (Open) - Full Port 10.62 (270) 11.38 (290) 13.88 (353) 13.88 (353) 19.25 (489) 19.25 (489) -
(Open) - Reduced Port - - - - - - 19.25 (489)
C (Seat Bore) - Full Port 2.50 (64) 3.00 (76) 4.00 (102) 4.00 (102) 6.00 (152) 6.00 (152) -
(Seat Bore) - Reduced Port - - - - - - 6.00 (152)
D Full Port 12.62 (321) 12.62 (321) 14.25 (362) 14.25 (362) 24.00 (610) 24.00 (610) -
Reduced Port - - - - - - 24.00 (610)
E Full Port 2.75 (70) 3.19 (81) 3.94 (100) 3.94 (100) 5.62 (143) 5.62 (143) -
Reduced Port - - - - - - 5.62 (143)
F Flange OD 7.50 (191) 8.25 (210) - 10.75 (274) 12.50 (318) 14.00 (356) 16.50 (419)
Flange Bolts (QTY. - SIZE in.) 8 - 3/4 8 - 3/4 - 8 - 5/8 12 - 7/8 12 - 1 12 - 1 1/8
Ring Number (RTJ) R-26 R-31 - R-37 R-45 R-45 R-49
WEIGHT lb. (kg)

FP - Threaded, Weld, Grooved 48 (22) 50 (23) 58 (26) 60 (27) 93 (42) 98 (44) 300 (136) 310 (141) -
FP - Flanged 70 (32) 74 (34) 90 (41) 96 (44) - 176 (80) 411 (186) 428 (194) -
RP - Flanged - - - - - - - - 590 (268)
32 TC1815
06/04 NP-5M
Flanged 0 - 400 RTJ 1 - 400 RF
2 - 600 RTJ 3 - 600 RF
Threaded 0 - API LP
1 - TBG
2 - UPTBG
4 - CSG (4 in. (100 mm) 400 Only)
Grooved 0 - Sch 80
Weld 0 - Sch 40
End Connection
Body Configuration 4 - Threaded 5 - Weld 6 - Grooved 7 - Flanged
Insert Material* 1 - Ductile Iron or Steel (Except 4 in. (100 mm) FP & 6 in. (150 mm) RP)
8 - 316 SS
Seat/Seal Elastomer 1 - Buna-N/Buna-N

2 - Viton/Viton
3 - Hypalon/Buna-N
Assembly
Base Coating 0 - Uncoated
Part 1 - DEMCO 10
Number 4 - DEMCO 11
5 - DEMCO 12
J00XXXX - XXXXXXX
PARTS LIST
Key VALVE SIZE in. (mm) 2 1/2 (65) FP 3 (80) FP 4 (100) FP• 6 (150) FP
8 (200) RP
No. Qty. DESCRIPTION ASME CLASS 400 600 400 600 400 600 400 600
Assembly Base Part Number FP - Threaded J001073 J001074 J001075 J001076 J001077 J001078 J001079 J001080
- Weld J001093 J001094 J001095 J001096 J001097 J001098 J001099 J001100
- Grooved J001083 J001084 J001085 J001086 J001087 J001088 J001089 J001090
- Flanged J001063 J001064 J001065 J001066 - J001068 J001069 J001070
RP - Flanged - - - - - - - J003945
1 1 Handle Ductile Iron ASTM A536 Grade 65-45-12 J001290 J001290 J001849 J001850
2 1 Stem Pin Spring Steel J005445-37528 J005445-37528 J005445-37532 J005445-37532
3 1 Lube Fitting Steel J005195 J005195 J005195 J005195
4 1 Back-Up Ring Chrome Leather J005532-212 J005532-212 J005532-214 J005532-214
5 1 Stem Seal Buna-N J005526-212 J005526-212 J005526-214 J005526-214
Viton J005531-212 J005531-212 J005531-214 J005531-214
6 1 Stem 303 SS -002, 316 SS -008 J001291-XXX J001291-XXX J001853-XXX J001854-XXX
7 1 Bonnet ASTM A395 Ductile Iron - J001856-01X - J001857-01X - J001858-01X -
ASTM A216 Grade WCB J001293-02X - J001856-02X - J001857-02X - J001858-02X
Coatings Uncoated -0X0, Coated DEMCO 10 -0X1, DEMCO 11 -0X4, DEMCO 12 -0X5
8 4 Body Stud ASTM A193 Grade B7 J002066 J001861 J001862 J001863
9 4 Body Stud Nut ASTM A194 Grade 2H 2709000-08-01 2709000-09-01 2709000-10-01 2709000-14-01
10 1 Bonnet Seal Buna-N J005526-245 J005526-249 J005526-258 J005526-446
Viton J005531-245 J005531-249 J005531-258 J005531-446
3 in. (80 mm) Full Port through 6 in. (150 mm)
Full Port Threaded, Grooved and Flanged:
Ductile Iron ASTM A395 Consult Factory For
All Others: Steel, ASTM A216 Grade WCB Body Part Numbers
Coatings (Except Weld End Bodies):
12 1 Seat J001877-0XX J001878-0XX J002207-0XX J001880-0XX
-08X Stainless Steel ASTM A351 Grade CF8M Annealed
13 1 Gate J001881-00X J001882-00X J001883-00X J001884-00X
Materials -002 Steel AISI 1040, Nickel Plated, -008 316 SS Annealed
• Available as 4 1/16 in. (103 mm) Casing Thread ASME CLASS 400-J024969-4422110.
TC1815
06/04 NP-5M 33
ASME/ANSI CLASS 900, 2 in. (50 mm) THROUGH 6 in. (150 mm) FULL PORT
ASME/ANSI CLASS 1500, 2 in. (50 mm) THROUGH 3 in. (80 mm) FULL PORT

VALVE SIZE 2 in. (50 mm) FP 2 1/2 in. (65 mm) FP 3 in. (80 mm) FP 4 in. (100 mm) FP 6 in. (150 mm) FP
DIMENSION ASME CLASS 900 1500 900 1500 900 1500 900 900
A Threaded, Weld, Grooved N/A* 9.00 (229) 9.75 (248) 11.00 (279) 11.00 (279) 13.00 (330) 20.00 (508)
Flanged - RF 14.50 (368) 16.50 (419) 15.00 (381) 18.50 (470) 18.00 (457) 24.00 (610)
Flanged - RTJ 14.62 (371) 16.62 (422) 15.12 (384) 18.62 (473) 18.12 (460) 24.12 (613)
B Open 9.88 (251) 22.88 (581) 12.75 (324) 12.75 (324) 15.00 (381) 19.25 (489)
C Seat Bore 2.00 (51) 2.50 (64) 3.00 (76) 3.00 (76) 4.00 (102) 6.00 (152)
D 14.50 (368) 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483)
F Flange OD 8.50 (216) 9.62 (244) 9.50 (241) 10.50 (267) 11.50 (292) 15.00 (381)
Flange Bolts (QTY. - SIZE in.) 8 - 7/8 8-1 8 - 7/8 8 - 1 1/8 8 - 1 1/8 12 - 1 1/8
Ring Number (RTJ) R-24 R-27 R-31 R-35 R-37 R-45
WEIGHT lb. (kg)

Threaded, Weld, Grooved N/A* 48 (22) 87 (39) 95 (43) 113 (51) 140 (64) 325 (147)
Flanged 100 (45) 170 (77) 160 (73) 205 (93) 230 (104) 540 (245)
* Refer to 2000, 3000, 5000 Threaded, Weld and Grooved End on pages 16 & 17.
TC1815
34 06/04 NP-5M
ASSEMBY PART NUMBER
Flanged 4 - 900 RTJ 5 - 900 RF
6 - 1500 RTJ 7 - 900 RF
Threaded 0 - API LP
1 - TBG
2 - UPTBG
Grooved 0 - Sch 80
Weld 0 - Sch 40 1 - Sch 80 5 - Sch 160
Size Class 900 Class 1500
2 1/2 in. (65 mm) 0&1 0, 1 & 5
3 in. (80 mm) 0&1 0, 1 & 5
4 in. (100 mm) 0&1 -
6 in. (150 mm) 0&1 -
Body Configuration 4 - Threaded 5 - Weld 6 - Grooved End 7 - Flanged
Insert Material* 1 - Ductile Iron or Steel (4 in. (100 mm)) 8 - 316 SS
1 - Buna-N/Buna-N
Part
Number Coating 1 - DEMCO 10 4 - DEMCO 11 5 - DEMCO 12
J00XXXX - XXXXXXX
PARTS LIST
FP FP FP FP FP
Key VALVE SIZE 2 in. (50 mm) 2 1/2 in. (65 mm) 3 in. (80 mm) 4 in. (100 mm) 6 in. (150 mm)
No. Qty. DESCRIPTION ASME CLASS 900 1500 900 1500 900 1500 900 900
Assembly Base Part Number J003947 J003948 J003951 J003952 J003953 J003957 J003955 J003999
1 1 Handle Ductile Iron ASTM A536 Grade 65-45-12 J023661 J0018195 J0018195 J023663 J001850
2 1 Stem Pin Spring Steel J005445-37528 J005445-37528 J005445-37528 J005445-37532
3 1 Lube Fitting Steel J005195 J005195 J005195 J005195
4 1 Back-Up Ring Chrome Leather J005532-211 J005532-212 J005532-212 J005532-214
*5 1 Stem Seal Buna-N J005526-211 J005526-212 J005526-212 J005526-214

Viton J005531-211 J005531-212 J005531-212 J005531-214
6 1 Stem 303 SS -002, 316 SS -008 J004395-XXX J004396-XXX J004396-XXX J004397-00X J001854-00X
7 1 Bonnet ASTM A487 Grade 4 Class A J004320-03X J004322-03X J004324-03X J004326-03X J004328-03X J001780-03X
8 4 Body Stud J002072 J002074 J002072 J002074 J002074 J002077
9 4 Body Stud Nut ASTM A194 Grade 2H 2709000-09-01 2709000-10-01 2709000-09-01 27090000-10-01 27090000-10-01 J001890
*10 1 Bonnet Seal Buna-N J005526-342 J005526-427 J005526-431 J005526-433 J005526-438 J005526-446
Viton J005531-342 J005531-427 J005531-431 J005531-433 J005531-438 J005531-446
11 1 Body materials: Consult Factory For

ASTM A487 Grade 4 Class A or Grade 2 Class B Body Part Numbers
*12 1 Seat Assembly J001876-0XX J001877-0XX J001878-0XX J002207-0XX J001880-0XX

*13 1 Gate J001275-XXX J001881-XXX J001882-00X J001883-00X J001884-00X

Materials -002 Nickel Plated Steel AISI 4140 - 2 in. (50 mm) Only AISI 1040 - Others
-008 316 SS Wrought Type - 2 in. (50 mm) Only ASTM A351 CF8M - Others
14 1 Screw Seal Buna-N J005526-222 J005526-234 J005526-224 J005526-226 -
15 1 Relief Fitting Steel J005197 J005197 J005197 J005197 -
TC1815
06/04 NP-5M 35
ASME/ANSI CLASS 1500, 4 in. (100 mm) FULL PORT
23.00 (584) DIA
BRONZE BUSHING
FLAT TOP FOLLOWER

21.25 (540)
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING
FLAT BOTTOM
ADAPTER
4.00 (102)
4.56 (116)

DIMENSION ASME CLASS 1500
A Threaded and Weld 13.00 (330)
Flanged - RF 21.50 (546)
Flanged - RTJ 21.62 (549)
Flange OD 12.25 (311)

Ring Number (RTJ) R-39
WEIGHT lb. (kg)

Threaded and Weld 162 (73)
Flanged 320 (145)
36 TC1815
06/04 NP-5M
Flanged 6 - 1500 RTJ 7 - 1500 RF

Threaded 0 - API LP
3 - LCSG
Weld 0 - Sch 40 1 - Sch 80 5 - Sch 160
End Connection
Seat/Seal Elastomer 1 - Buna-N/Buna-N

2 - Viton/Viton
3 - Hypalon/Buna-N
Assembly
Base Coating 0 - Uncoated
Part 1 - DEMCO 10
Number 4 - DEMCO 11
5 - DEMCO 12
J003010 - XXXXXXX
PARTS LIST
No. Qty. DESCRIPTION ASME CLASS 1500
Assembly Base Part Number J003010
1 1 Handle Assembly Ductile Iron ASTM A536 Grade 65-45-12 2139714-01
*5 1 Stem Seal Assembly Buna-N J001951-001
Viton J001951-006
6 1 Stem 303 SS -002, 316 SS -008 J001933-XXX
7 1 Bonnet ASTM A487 Grade 4 Class A or Class B J001977-XXX
8 4 Body Stud ASTM A193 Grade B7 **J0024500
9 4 Body Stud Nut ASTM A194 Grade 2H **2709000-12-01
Viton J005531-439
11 1 Body Materials: Consult Factory For
ASTM A487 Grade 4 Class A or Grade 2 Class B Body Part Numbers
*12 1 Seat J002207-0XX
Materials Inserts: - 02X Steel AISI 1040
*13 1 Gate J001926-XXX
Materials -002 AISI 4140 Nickel Plated
-008 ASTM A351 Grade CF8M
14 1 Screw Seal Buna-N J005526-227
16 1 Lock Handle AISI C1213 J001897
18 1 Stem Screw AISI C1213 J001915
19 1 Screw Housing AISI 1029 J001958
*20 1 Secondary Seal Buna-N J005526-214
21 1 Retainer AISI C1213 J001942
22 1 Pin, Lock Handle Steel J005420-18732
23 2 Bonnet Stud ASTM A193 Grade B7 J002072
24 2 Body Stud Nut ASTM A194 Grade 2H 2709000-09-01

** Valves made prior to 1994 may use 7 Pitch Stud J002075 and Nut J053251-042
TC1815
06/04 NP-5M 37
SERIES DT GATE VALVES
ASME/ANSI CLASS 600, 900 & 1500
SEAT SPRING
SEAT SEAL
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
(OPEN)
RUBBER SEAL RING
P-10
FLAT BOTTOM SEAT SPRING AND SEAL
ADAPTER PART OF SEAT ASSEMBLY
SEAT SEAL

PC BUNA, VITON, HNBR
SEAT SEAL
SEE SEAT DETAIL PART OF SEAT ASSEMBLY

A Threaded 8.50 (216) 8.50 (216) 8.50 (216)
Flanged - RF 11.50 (292) 14.50 (368) 14.50 (368)
Flanged - RTJ 11.62 (295) 14.62 (371) 14.62 (371)
B (Open) 14.63 (372) 14.63 (372) 14.63 (372)
C (Seat Bore) 2.06 (52) 2.06 (52) 2.06 (52)
D 14.50 (368) 14.50 (368) 14.50 (368)
E 5.00 (127) 5.25 (133) 5.25 (133)
F Flange OD 6.50 (165) 8.50 (216) 8.50 (216)
Flange Bolts (QTY. - SIZE in.) 8 - 5/8 8 - 7/8 8 - 7/8
Ring Number (RTJ) R-23 R-24 R-24
WEIGHT lb. (kg)
Threaded - 44 (20) 44 (20)
Flanged 48 (22) 82 (37) 82 (37)
WORKING PRESSURE (psi)

END CONNECTION Material ASME CLASS 600 900 1500
Threaded Bronze 1480 2220 3705
Stainless Steel 1480 2220 3705
Flanged Bronze 1480 2220 3705
38 TC1815
06/04 NP-5M
ASSEMBY PART NUMBER
2 - 600 RTJ
3 - 600 RF
Flanged 4 - 900 RTJ
5 - 900 RF
6 - 1500 RTJ
End Connections 7 - 1500 RF
Threaded 0 - API LP
2 - UPTBG

7 - Flanged
Stem Material 8 - Stainless Steel
Gate Material 8 - Stainless Steel
Seat Ring Material 8 - Stainless Steel
1 - Buna-N/Buna-N
2 - Viton/Viton
Seat Insert/Seal 4 - P-10/Hytrel, TEFLON*
Assembly 5 - HNBR/HNBR
Base 6 - P-10/Buna-N
Part 7 - P-10/HNBR
Number
Body/Bonnet 6 - Aluminum Bronze
8 - Stainless Steel
PARTS LIST XXXXX - XX88 8XX *Hytrel Seat Seal, TEFLON Bonnet & Stem Seals

No. Qty. DESCRIPTION ASME CLASS 600 900 1500 MATERIAL SPECIFICATION (SEE NOTE 1.)
Assembly Base Part Number J024726 J024727 J024753
10 1 Body Consult Factory For Body Part Numbers Aluminum Bronze ASTM B148 Alloy 955
Stainless Steel CF8M
20 1 Bonnet 2060241-01 J024323-060 Aluminum Bronze ASTM B148 Alloy 955
2060241-02 J024660-080 Stainless Steel CF8M
21 1 Stem Bushing (f/SS Bonnet) - J024661-060 Bronze ASTM B505 Alloy 93200
30 1 Gate 1, 2, 5 J024558-008 Stainless Steel CF8M
(See Note 2.) 4, 6, 7 J024559-008
40 1 Stem J024089-008 316 SS
50 2 Seat Assembly 1 2061588-01 Ring: CF8M: Elastomer: Buna-N Peroxide Cured, 90 Duro
(See Note 2.) 2 2061589-01 Ring: CF8M: Elastomer: Viton, 75 Duro
5 2227057-01 Ring: CF8M; Elastomer: HNBR, Peroxide Cured, 80 Duro
6 2061590-01 Ring: CF8M; Insert: PEEK; Seal: Buna-N Peroxide Cured,
90 Duro; Spring: Inconel X-750
7 2227058-01 Ring: CF8M; Insert: PEEK; Seal: HNBR, 90 Duro
Spring: Inconel X-750
4 2061587-01 Ring: CF8M; Insert PEEK; Seal: Hytrel/Elgiloy;
60 1 Handle 2139937-01 Ductile Iron ASTM A536 Grade 65-45-12
70 1 Stem Packing Retainer J024324-008 316 SS
90 1 Stem Seal Assembly 1, 6 J024757-117 Buna-N, Peroxide Cured, 90 Duro
(See Note 2.) 2 J024757-116 Viton, 90 Duro
5, 7 J024757-119 HNBR, 90 Duro
4 J024882-601 TEFLON/Elgiloy
100 1 Retainer Snap Ring J090066-162 PH 15-7 Mo
110 4 Cap Screw J056731-32024 J056731-34032 Alloy Steel
120 1 Lube Fitting J005195 Steel
130 1 Relief Fitting J005197 Steel
160 1 Bonnet Seal 1, 6 J005520-234 Buna-N, Peroxide Cured, 90 Duro
5, 7 2712425-37 HNBR,90 Duro
180 1 Handle Seal J005526-219 Buna-N
Notes: 1. CF8M is ASTM A351 Grade CF8M Annealed. 316 SS is AISI Type 316 SS Annealed.
2. These Parts are Keyed to the Assembly Part Number ”Seat Insert/Seal” Code Numbers Indicated.
TC1815
06/04 NP-5M 39
SEAT SPRING
SEAT SEAL
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS
RUBBER SEAL RING (OPEN) SEAT ASSEMBLY DETAIL
P-10
SEAT SEAL

SEAT SEAL

A Threaded 8.75 (222) 8.75 (222) 8.75 (222)
Flanged - RF 13.00 (330) 16.50 (419) 16.50 (419)
Flanged - RTJ 13.12 (333) 16.62 (422) 16.62 (422)
B (Open) 16.71 (424) 16.71 (424) 16.71 (424)
C (Seat Bore) 2.56 (65) 2.56 (65) 2.56 (65)
D 14.75 (375) 14.75 (375) 14.75 (375)
E 6.12 (155) 6.38 (162) 6.38 (162)
F Flange OD 7.50 (191) 9.62 (244) 9.62 (244)
Flange Bolts (QTY. - SIZE in.) 8 - 3/4 8-1 8-1
WEIGHT lb. (kg)
Threaded - 57 (26) 57 (26)
Flanged 77 (35) 110 (50) 110 (50)

40 TC1815
06/04 NP-5M
ASSEMBY PART NUMBER
2 - 600 RTJ
3 - 600 RF
Flanged 4 - 900 RTJ
5 - 900 RF
6 - 1500 RTJ
Threaded 0 - API LP
2 - UPTBG

7 - Flanged
1 - Buna-N/Buna-N
Seat Insert/Seal 2 - Viton/Viton
Assembly 4 - P-10/Hytrel, TEFLON*
Part
Number
8 - Stainless Steel
XXXXX - XX88 8XX *Hytrel Seat Seal, TEFLON Bonnet & Stem Seals
PARTS LIST
Assembly Base Part Number J024728 J024729 J024754 Aluminum Bronze
J024728 J025062 J025063 Stainless Steel
Stainless Steel CF8M
20 1 Bonnet J024608-060 J024583-060 Aluminum Bronze ASTM B148 Alloy 955
J024609-080 J024677-080 Stainless Stel CF8M
21 1 Stem Bushing (f/SS Bonnet) J024676-060 Bronze ASTM B150 Alloy C63000
30 1 Gate 1, 2 2060265-01 Stainless Steel CF8M
(See Note 2.) 4, 6 2060266-01
40 1 Stem f/Aluminum Bronze Valve 2060256-02 316 SS
f/Stainless Steel Valve 2060256-02 2061921-01
70 1 Stem Packing Retainer 2060259-08 316 SS
TC1815
06/04 NP-5M 41
SEAT SPRING
SEAT SEAL
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING
HOMOGENEOUS SEAT ASSEMBLY DETAIL

RUBBER SEAL RING (OPEN)
P-10
SEAT SEAL

SEAT SEAL

A Threaded - 9.69 (246) -
Flanged - RF 14.00 (356) 15.00 (381) 18.50 (470)
Flanged - RTJ 14.12 (359) 15.12 (384) 18.62 (373)
B (Open) 18.00 (457) 18.00 (457) 18.82 (478)
C (Seat Bore) 3.12 (79) 3.12 (79) 3.12 (79)
D 14.75 (375) 14.75 (375) 18.00 (457)
E 6.81 (173) 6.94 (176) 7.15 (182)
F Flange OD 8.25 (210) 9.50 (241) 10.50 (257)
Flange Bolts (QTY. - SIZE in.) 8 - 3/4 8 - 7/8 8 - 1 1/8
WEIGHT lb. (kg)
Threaded - 75 (34) -
Flanged 100 (45) 125 (37) 185 (84)

42 TC1815
06/04 NP-5M
ASSEMBY PART NUMBER
2 - 600 RTJ
3 - 600 RF
Flanged 4 - 900 RTJ
5 - 900 RF
6 - 1500 RTJ
Threaded 0 - API LP (3 in. (80 mm) 900 Only)

7 - Flanged
1 - Buna-N/Buna-N
Assembly Seat Insert/Seal 2 - Viton/Viton
Base 4 - P-10/Hytrel, TEFLON*
Part 6 - P-10/Buna-N
Number
XXXXX - XX88 8X6

*Hytrel Seat Seal, TEFLON Bonnet & Stem Seals
PARTS LIST
20 1 Bonnet J024624-006 J024642-006 Aluminum Bronze ASTM B148 Alloy 955
30 1 Gate 1, 2 J024621-008 Stainless Steel CF8M
(See Note 2.) 4, 6 J024623-008
40 1 Stem J024620-008 316 SS
6 2061590-03 Ring: CF8M; Insert PEEK; Seal: Buna-N Peroxide Cured, 90 Duro
4 2061587-03 Ring: CF8M; Insert PEEK; Seal: Hytrel/Elgiloy; Spring: Inconel X-750
60 1 Handle 2139931-01 2139932-01 Ductile Iron ASTM A536 Grade 65-45-12
70 1 Stem Packing Retainer 2060259-08 316 SS
TC1815
06/04 NP-5M 43
SEAT SPRING
SEAT SEAL
FLAT TOP FOLLOWER
FABRIC REINFORCED
SEAL RING

HOMOGENEOUS
RUBBER SEAL RING (OPEN) P-10
SEAT SPRING AND SEAL
FLAT BOTTOM PART OF SEAT ASSEMBLY
ADAPTER
SEAT SEAL

SEAT SEAL
PART OF SEAT ASSEMBLY
SEE SEAT DETAIL

A Flanged - RF 17.00 (332) 18.00 (457) 21.50 (546)
Flanged - RTJ 17.12 (435) 18.12 (460) 21.62 (549)
B (Open) 22.25 (565) 22.25 (565) 22.54 (573)
C (Seat Bore) 4.06 (103) 4.06 (103) 4.06 (103)
D 23.00 (584) 23.00 (584) 23.00 (584)
E 9.00 (229) 9.12 (232) 9.41 (239)
F Flange OD 10.75 (273) 11.50 (292) 12.25 (311)
Flange Bolts (QTY. - SIZE in.) 8 - 7/8 8 - 1 1/8 8 - 1 1/4
WEIGHT lb. (kg)
Flanged 170 (77) 215 (98) 295 (134)

44 TC1815
06/04 NP-5M
ASSEMBY PART NUMBER
2 - 600 RTJ
3 - 600 RF
End Connections 4 - 900 RTJ
5 - 900 RF
6 - 1500 RTJ
7 - 1500 RF
Body Configuration 7 - Flanged
1 - Buna-N/Buna-N
Seat Insert/Seal 2 - Viton/Viton
Assembly 4 - P-10/Hytrel, TEFLON*
Part
Number
XXXXX - X788 8X6 *Hytrel Seat Seal, TEFLON Bonnet & Stem Seals
PARTS LIST
20 1 Bonnet J024711-006 J024712-006 J024713-006 Aluminum Bronze ASTM B148 Alloy 955
30 1 Gate 1, 2 J024719-008 J024721-008 Stainless Steel CF8M
(See Note 2.) 4, 6 J024720-008 J024722-008
40 1 Stem J024717-008 J024718-008 316 SS - 600 & 900 Only; XM-19 1500 Only
70 1 Stem Packing Retainer J024716-008 316 SS
110 4 Cap Screw J0565121-34032 J056512-36036 J056512-41048 Alloy Steel
Notes: 1. CF8M is ASTM A351 Grade CF8M Annealed. 316 SS is AISI Type 316 SS Annealed. XM-19 is ASTM A479 Type XM-19 Hot Rolled.
TC1815
06/04 NP-5M 45
GATE VALVES
TERMS AND CONDITIONS
1. CONTRACT ACCEPTANCE: of raw materials, supplies, fuel, power or Any repair work performed by Seller is warranted
Any written or oral purchase order received transportation, breakdown of equipment or any for one year from completion of such repairs and
from Buyer by Cooper Cameron Corporation, other causes beyond Seller's reasonable control, applies only to work performed.
Cameron Division and Cooper Cameron Valves whether of similar or dissimilar nature than those If, within these specified periods, Seller receives
("Seller”) shall be construed as a written enumerated. Seller shall have additional time notice from Buyer of any alleged defect in or
acceptance of Seller's offer to sell and shall be within which to perform as may be reasonably nonconformance of any product or repair and if,
filled in accordance with the terms and conditions necessary under the circumstances and shall have in the Seller's sole judgment, the product or repair
of sale set forth herein. SELLER'S ACCEPTANCE OF the right to apportion its production among its does not conform or is found to be defective in
THIS ORDER IS EXPRESSLY CONDITIONED ON customers in such a manner as it may consider to material or workmanship, then, Buyer shall, at
BUYER'S ASSENT TO THE TERMS CONTAINED be equitable. Seller's request, return the part or product F.O.B.
HEREIN. The terms and conditions of Seller's Seller reserves the right to furnish commercially to Seller's designated plant or service location.
proposal (if any) and acknowledgement shall equivalent or better substitutes for materials or Seller has no liability for removal or reinstallation
prevail over any conflicting or different terms in to subcontract the Buyer's order or portions of products or equipment from below the surface
Buyer's order unless Buyer notifies Seller in writing thereof as Seller deems necessary. In no event of the water. Seller, at its option and expense,
of its objections thereto within fifteen (15) days shall Seller be liable for any consequential shall repair or replace the defective part or product,
from receipt of Seller's acknowledgement. Buyer's damages for labor resulting from failure or or repay to Buyer the full price paid by Buyer for
standard terms of purchase will not be considered delay in shipment. If Buyer requires drawings, such defective part, repair or product. Any
a counteroffer to Seller's terms and conditions of procedures, standards or similar material for repayment of purchase price shall be without
sale. The failure of Seller to object to any provision approval, shipping schedules will be calculated interest.
in conflict herewith whether contained on Buyer's from the time such approvals are received by Seller's warranty liability, including defects
purchase order or otherwise shall not be Seller, since shipping schedules are based on caused by Seller's negligence, shall be limited to
construed as a waiver of the provisions hereof Seller having all required information and a such repair, replacement or refund, and shall not
nor as an acceptance thereof. firm order from Buyer which is enterable into include claims for labor costs, expenses of Buyer
2. QUOTATIONS AND PRICES: production. Any hold points, witness points or resulting from such defects, recovery under general
All quotations are made for prompt acceptance the need for inspection by Buyer's represent- tort law or strict liability or for damages resulting
and any terms quoted therein are subject to atives must be identified by Buyer at the time from delays, loss of use, or other direct, indirect,
change without notice after thirty (30) days from of quotation (if any) and/or order placement in incidental or consequential damages of any kind.
the date quoted unless specifically stated order that the effect on the prices or shipping Seller will not be responsible for failures of products
otherwise on the quotation. Any product, service schedules (if any) can be taken into account. which have been in any way tampered with or
capability or manufacturing capability which may Additional inspection or testing required by altered by anyone other than an authorized
be available at the time a quotation is made is Buyer which affects normal production representative of Seller, failures due to lack of
subject to prior sale. Prices quoted are valid for sequence will be considered as extending compliance with recommended maintenance
thirty (30) days unless specifically stated otherwise the shipping dates accordingly. procedures or products which have been repaired
on the quotation and are subject to change 5. MINIMUM BILLING: or altered in such a way (in Seller's judgment) as to
without notice. The price in effpct at the time of Seller reserves the right to impose a minimum affect the products adversely. THIS WARRANTY IS
shipment including any escalation formula will billing charge on all sales, change orders or EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
apply, unless a valid quotation or written order supplements. EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE
agreement to the contrary exists between Buyer 6. TERMS OF PAYMENT: WARRANTY OF MERCHANTABILITY AND FITNESS
and Seller. All prices shown are in U.S. dollars Terms of payment for all materials and service FOR PARTICULAR PURPOSE WHICH EXCEED
and are F.O.B. Seller‘s shipping point. are 30 days from invoice date, at net price, THE FOREGOING WARRANTY.
Any documentation pertaining to traceability provided satisfactory credit has been established. 9. NUCLEAR SALES:
requirements for raw materials or products or All unpaid invoices are subject to the maximum The products sold hereunder are not designed or
documentation required for any routine or legal interest rate per annum commencing with manufactured for use in or with any atomic
special processes must be identified by the Buyer the due date. installation or activity. If the Buyer or ultimate
at the time of quotation (if any) or at the time of 7. CANCELLATIONS AND RETURNS: user of these products intends to use them in such
order placement. Purchase orders once placed by Buyer and an installation or activity, Seller's Nuclear Terms of
3. TAXES: accepted by Seller can be canceled only with Sale shall be part of and control this contract.
Any tax or other charge imposed by law on the Seller's written consent and upon terms which Seller will furnish Buyer with a copy of its Nuclear
sale or production of goods or the performance will save Seller from loss. No products may be Terms of Sale upon request.
of services shall be paid by the Buyer, unless the returned for credit or adjustment without 10. PATENT INFRINGEMENT:
law specifically provides that such payment must written permission from Seller's office Seller warrants that the use or sale of material
be made by Seller, in which case Buyer shall authorized to issue such permission. or apparatus sold or rented by it to Buyer
reimburse Seller for such payment as part of the 8. WARRANTIES: hereunder will not infringe United States' patents
purchase price. Custom duties, consular fees, All products of Seller's manufacture are of others covering such material or apparatus by
insurance charges and other comparable charges warranted against defects of material and itself, and hereby agrees to indemnify Buyer against
will be borne by Buyer. workmanship for a period of twelve (12) judgment for damages for such infringement of
4. SHIPPING SCHEDULE AND DELIVERY: months from the date of installation or any such patent, provided that Buyer shall, upon
Shipment schedules are given as accurately as eighteen (18) months from date of shipment, receipt of any claim for infringement of any such
conditions permit and every effort will be made whichever period first expires, when such patent or threat of suit for such infringement or
to make shipments as scheduled. Seller will not products are used in the service and within upon the filing of any suit for infringement, which-
be responsible for deviations in meeting shipping the pressure range for which they were ever comes first, promptly notify Seller in writing
schedules nor for any losses or damages to Buyer manufactured. In the case of products or parts and afford Seller full opportunity, at its option and
(or any third party) occasioned by deviations in not wholly of Seller's manufacture, Seller's its own expense, to answer such claim or threat
the shipping schedule, whether due to Acts of liability shall be limited to the extent of its of suit, assume the control of the defense of said
God, orders bearing priority ratings established recovery from the manufacturer of such suit, and settle or compromise same in any way
pursuant to law, differences with workmen, local products or parts under its liability to Seller. Seller sees fit. Other than court-awarded
labor shortages, fire, flood, shortages or failure judgments as aforesaid Seller shall not be liable
46 TC1815
06/04 NP-5M
For any delays, loss of use or for other direct, Buyer agrees that (i) title and risk of ownership 18. INDEMNIFICATION AND
indirect, incidental or consequential damages shall pass to Buyer on date of Seller's invoice and LIMITATION OF LIABILITY:
incurred by reason of any such judgment. Seller (ii) Buyer will make payments within thirty days A. INDEMNIFICATION:
does not warrant that such material or after date of such invoice. Seller shall retain Seller agrees to indemnify Buyer and hold Buyer
apparatus (a) will not infringe any such patent custodial risk of loss until delivery is made in harmless against any claims, demands or causes
when not manufactured by or for Seller or when accordance with such requirements. of action for property damage or personal injury
specially made in whole or in part to the Buyer's 16. TRANSPORTATION CHARGES, (including death) caused by the negligent act or
design specification and such infringement arises ALLOWANCES, CLAIMS: omission of any employee, agent or sub-
from the inclusion of such specified design or All prices are F.O.B. Seller's plant or other contractor of Seller and not contributed to by
(b), if used or sold in combination with other designated shipping point. the negligence of Buyer, its employees, its agents
material or apparatus, or if used in the practice No freight is allowed unless stated in Seller's or any third party. Seller shall not be responsible
of a process, will not, as a result of such quotation (if any) or in a written contract which for the acts and workmanship of employees,
combination or use, infringe any patent covering may exist between Seller and Buyer at the time agents, contractors or subcontractors of Buyer
such combination or process; and Seller shall not of shipment. If Seller's quotation or a written or any third party, nor for failure or malfunction
be liable for and does not indemnify Buyer for contract states that all or a portion of freight is of any tools, materials, equipment, products,
damages or losses of any nature whatsoever allowed, all prices are F.O.B. Seller's plant or supplies, facilities or devices not manufactured
resulting from actual or alleged patent other designated shipping point, with most and supplied by Seller. Buyer agrees to hold
infringement arising pursuant to (a) or (b) economical surface transportation allowed. Seller harmless from any and all losses, claims,
above. If the quoted or contractual price includes or damages arising from subsurface damage,
11. SELLER'S RIGHT TO MANUFACTURE: transportation, Seller reserves the right to surface damage caused by subsurface damage,
Seller in its sole discretion shall have the right designate the common carrier and to ship in the loss of hydrocarbons and from pollution,
to manufacture the products provided manner it deems most economical. Added costs regardless of whether such damages, losses or
hereunder as far in advance of its estimated due to special routing requested by the Buyer claims were caused by the negligence or sole
shipping schedule as it deems appropriate. Seller are chargeable to the Buyer. Under no negligence of Seller, it being the intent of the
expressly reserves the right to change or modify circumstances is any freight allowance which is parties that this indemnity shall apply to
the design and construction of any product in absorbed by Seller to be deducted from the property of Buyer or to that of any third party.
due course of Seller's manufacturing procedure selling price. If the quoted price or contract B. LIMITATION OF LIABILITY:
without incurring any obligation or liability to includes transportation, no deduction will be UNDER NO CIRCUMSTANCES SHALL SELLER BE
furnish or install such changes, modifications or made in lieu thereof whether Buyer accepts LIABLE FOR ANY SPECIAL, CONSEQUENTIAL OR
improvements to products previously or shipment at plant, warehouse, freight station, INCIDENTAL DAMAGES, INCLUDING, BUT NOT
subsequently sold. or otherwise supplies its own transportation. LIMITED TO LOSS OF ANTICIPATED PROFITS,
12. ENGINEERING AND SERVICE: When sales are made from the Seller's LOSS OF USE OF EQUIPMENT OR OF ANY
Upon request, Seller will provide engineering warehouse, Seller reserves the right to charge INSTALLATION, SYSTEM OR FACILITY INTO
and/or technical information regarding its either actual or pro-rated freight from Seller's WHICH SELLER'S EQUIPMENT MAY BE LOCATED
products and their uses and if feasible, will principle point of manufacture to Seller's OR AT WHICH SELLER, ITS AGENT OR
provide personnel to assist Buyer in effecting warehouse. Buyer assumes risk of loss upon SUBCONTRACTOR MAY BE PERFORMING WORK.
field installations and/or field service. Any such delivery to the carrier, regardless of who pays Seller's total responsibility for any claims,
information, service or assistance so provided, shipping costs. damages, losses or liabilities arising out of or
whether with or without charge, shall be Seller endeavors to pack or prepare all related to its performance of this contract or
advisory only. In that regard, neither Seller nor shipments so that they will not break, rust or the products or services covered hereunder shall
Buyer assumes any liability for the acts or deteriorate in transit, but does not guarantee not exceed the purchase price.
omissions of the other party except as may be against such damage. Unless requested in 19. MODIFICATION, RESCISSION & WAIVER:
provided in these terms. writing by the Buyer, no shipments are insured The terms herein may not be modified or
13. LABOR STANDARDS: by Seller against damage or loss in transit. Seller rescinded nor any of its provisions waived unless
Seller hereby certifies that these products were will place insurance as nearly as possible in such modification, rescission or waiver is in
produced in accordance with all applicable accordance with Buyer's written instructions but writing and signed by an authorized employee
requirements of Section 6, 7 and 12 of the in such case Seller acts only as agent between of Seller at its office in Houston, Texas.
Fair Labor Standards Act as amended and of the insurance company and the Buyer and Failure of Seller to insist in anyone or more
regulations and orders of the United States assumes no liability whatsoever. instances upon the performance of any of the
Department of Labor issued under Section 14 Any claims for shipping loss, breakage or terms and conditions of the contract or the
thereof. damage (obvious or concealed) are Buyer's failure of Seller to exercise any of its rights
14. INSPECTION: responsibility and should be made to the carrier. hereunder shall not be construed as a waiver
Unless otherwise agreed in writing, final All claims regarding shortages must be made or relinquishment of any such term, condition,
inspection and acceptance of products must be within thirty (30) days from receipt of shipment or right hereunder and shall not affect Seller's
made at Seller's plant or other shipping or and must be accompanied by the packing list(s) right to insist upon strict performance and
receiving point designated by Seller and shall covering the shipment. compliance with regard to any unexecuted
be conclusive except as regards latent defects. 17. CONSULAR INVOICES: portions of this contract or future performance
Buyer's representatives may inspect at the Consular fees for legalizing invoices, stamping of these terms and conditions.
Seller's plant or shipping point during working bills of lading, or other documents required All orders must be accepted by an authorized
hours prior to shipment in such manner as will by the laws of any country or destination are employee of Seller. The rights and duties of the
not interfere with operations. not included in quotations or selling prices. parties and construction and effect of all
15. DELIVERY AND ACCEPTANCE: If instructed in writing, Seller will make provisions hereof shall be governed by and
Delivery shall be in accordance with the arrangements for consular documents and construed according to the internal laws of the
requirements in the Purchase Contract, provided, declarations as agent of the Buyer, but Seller State of Texas. Any disputes which arise under
in the event Buyer is unable to accept delivery assumes no liability whatsoever as a result of this agreement shall be venued in the District
upon completion of the manufacture of the making such arrangements. Seller assumes no Court of Harris County, Texas or in the Southern
Goods in accordance with such requirements, responsibility for any fines or other charges District of Texas.
imposed due to errors or incorrect declarations.
CAM/T&C/US/96 REV. 9/03

TC1815
06/04 NP-5M 47
GATE VALVES
TRADE MARK INFORMATION
References in this catalog to registered trademarks or product

designations, which are owned by Cooper Cameron Corporation
are as follows:
Cameron®
Demco®
DynaCentric®
DynaSeal®
Foster®
NAVCO®
Nutron®
Orbit®
Pow-R-Seal®
Saf-T-Seal®
Thornhill Craver™
TruSeal®
Unibolt™
W-K-M®
References in this catalog to registered trademarks or product

designations, which are not owned by Cooper Cameron
Corporation are as follows:
Celcon Hoechst Celanese Corporation

Delrin E.I. DuPont De Nemours & Company
Fluorel Minnesota Mining and Manufacturing Company
Hastelloy Haynes International, Inc.
Hycar Hydrocarbon Chemical and Rubber Company
Hydrin Zeon Chemicals USA, Inc.
Hypalon E.I. DuPont De Nemours & Company
Inconel INCO Nickel Sales, Inc.
Monel INCO Alloys International, Inc.
Nordel E.I. DuPont De Nemours & Company
Stellite Stoody Deloro Stellite, Inc.
Teflon E.I. DuPont De Nemours & Company
Viton E.I. DuPont De Nemours & Company
48 TC1815
06/04 NP-5M

Demco Catalog

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Demco Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Demco Catalog

Uploaded by

Copyright:

Available Formats

SERIES DM AND DT/DB GATE VALVES

FEATURES AND BENEFITS

Series DM Gate Valves 2

Series DM 7500 Gate Valves 3

Series DT & DB Gate Valves 4&5

General Technical Information 6&7

DIMENSIONS AND MATERIALS

Series DM 7500 Gate Valves

Series DM Gate Valves

Series DM Gate Valves

Series DT Gate Valves

TERMS AND CONDITIONS 46 & 47

FEATURES AND BENEFITS

DOUBLE ACTING THREAD DESIGN FOR FAST OPERATION

HEAVY DUTY ROLLER BEARINGS

FLOATING SLAB GATE DESIGN

* Other Weld Connections are Available. Consult Factory for Information.

Stem threads isolated from line media

Four ring packing set

SEAT ASSEMBLY DETAIL

SEAT ASSEMBLY DETAIL

DT AND DB SERIES PRESSURE CLASSES AND SIZES

SERIES DB GATE VALVE

Valve Size Designations and Weld End Dimensional Information

2. Reduced port valve size descriptions are designated by two numbers.

BRONZE BUSHING 13.04 (331)

FLAT TOP FOLLOWER

DIMENSIONAL DATA & WEIGHTS

VALVE SEAT ID 2.00 (51)

FOR FLANGED ENDS

NUMBER OF HANDLE TURNS FROM OPEN TO CLOSED 8.60

WEIGHT lb. (kg)

Body Configuration 5 - Weld 7 - Flanged

Stem Material 7 - 410 SS 8 - 17-4 PH SS

* Recommended Spare Parts For One Year’s Service.

DIMENSIONAL DATA & WEIGHTS

A Weld End 13.00 (330)

VALVE SEAT ID 3.00 (76)

FOR FLANGED ENDS

NUMBER OF HANDLE TURNS FROM OPEN TO CLOSED 16.01

WEIGHT lb. (kg)

Stem Material 7 - 410 SS 8 - 17-4 PH SS

* Recommended Spare Parts For One Year’s Service.

DIMENSIONAL DATA & WEIGHTS

A Weld End 16.00 (406)

VALVE SEAT ID 4.00 (102)

FOR FLANGED ENDS

NUMBER OF HANDLE TURNS FROM OPEN TO CLOSED 21.36

WEIGHT lb. (kg)

Stem Material 7 - 410 SS 8 - 17-4 PH SS

DIMENSIONAL DATA & WEIGHTS

A Weld End 17.88 (454)

VALVE SEAT ID 5.19 (132)

FOR FLANGED ENDS

NUMBER OF HANDLE TURNS FROM OPEN TO CLOSED 27.67

WEIGHT lb. (kg)

Body Configuration 5 - Weld 7 - Flanged

Stem Material 7 - 410 SS 8 - 17-4 PH SS

* Recommended Spare Parts For One Year’s Service.