The document provides instructions for removing and installing a generator. It involves disconnecting the battery, draining the coolant, removing parts like the splash shield, drive belt, and generator. For installation, the reverse process is followed by installing the drive belt tensioner and bolts, generator, drive belt, refilling the coolant, and reconnecting the battery.
The document provides instructions for removing and installing a generator. It involves disconnecting the battery, draining the coolant, removing parts like the splash shield, drive belt, and generator. For installation, the reverse process is followed by installing the drive belt tensioner and bolts, generator, drive belt, refilling the coolant, and reconnecting the battery.
The document provides instructions for removing and installing a generator. It involves disconnecting the battery, draining the coolant, removing parts like the splash shield, drive belt, and generator. For installation, the reverse process is followed by installing the drive belt tensioner and bolts, generator, drive belt, refilling the coolant, and reconnecting the battery.
The document provides instructions for removing and installing a generator. It involves disconnecting the battery, draining the coolant, removing parts like the splash shield, drive belt, and generator. For installation, the reverse process is followed by installing the drive belt tensioner and bolts, generator, drive belt, refilling the coolant, and reconnecting the battery.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1of 2
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Raise the vehicle. 3. Remove the front lower splash shield. 4. Drain the coolant. 5. Close the radiator drain cock. 6. Install the front splash shield. 7. Lower the vehicle. 8. Remove the drive belt. 9. Remove the generator. 10. Remove the heater hoses.
Zoom Sized for Print
11. Remove the drive belt tensioner bolts.
12. Remove the drive belt tensioner.
Installation Procedure Zoom Sized for Print
1. Install the drive belt tensioner.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the drive belt tensioner bolts.
Tighten the drive belt bolts to 50 Nm (37 ft. lbs.) .
3. Install the heater hoses.
4. Install the Generator. 5. Install the drive belt. 6. Refill the coolant. 7. Connect the negative battery cable.