Es Trp1 Pipe Compatibility
Es Trp1 Pipe Compatibility
Es Trp1 Pipe Compatibility
Contractor
Job Location
Approval
Engineer
Approval
Representative
Series TRP1
Pipe Compatibility
TM
Specifications
The system shall be plumbed using Watts TRITON RF Fusion
Welded pipe and fittings. Each fitting will incorporate the TRITON
Fuse-Tel fusion indicator that will extrude upon completion of
the joint and provide a visual and tactile indication that the weld has
been successfully completed. The RF welding system will operate
on 110/115 VAC power and utilize a 13.56MHz ISM band frequency
in conjunction with a dual susceptor imbedded in the fitting to propagate the weld.
NOTICE
Fitting and pipe must be free of grease, oils, water and debris.
Wipe each fitting and pipe end before insertion of pipe into fitting.
Pipe must be inserted into the fitting to the correct depth. Use
the depth feature on the side of the fitting to properly mark the
required insertion depth on the pipe.
Standards
Manufactured in accordance with American Society
for Testing and Materials
D3035 Standard Specification for Polyethylene (PE) Plastic Pipe
(D2-PR) Based on Controlled Outside Diameter
Temperature
Maximum Operating Temperature: 140F (60C)
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
2014 Watts