Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 57 views

    CCNA Guia Practica 6

    Uploaded by

    Andy
    The document provides instructions for configuring the EIGRP routing protocol on a network topology simulated in Packet Tracer. The objectives are to configure EIGRP, encrypt passwords on the routers, and verify EIGRP is functioning properly. The procedure describes configuring six routers with IP addresses and EIGRP, as well as five PCs. It includes commands to verify neighbor adjacency, topology tables, and EIGRP traffic statistics. Finally, it instructs adding a high-bandwidth link between two routers and verifying routing updates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CCNA Guia Practica 6

    Uploaded by

    Andy
    57 views6 pages
    The document provides instructions for configuring the EIGRP routing protocol on a network topology simulated in Packet Tracer. The objectives are to configure EIGRP, encrypt passwords on the routers, and verify EIGRP is functioning properly. The procedure describes configuring six routers with IP addresses and EIGRP, as well as five PCs. It includes commands to verify neighbor adjacency, topology tables, and EIGRP traffic statistics. Finally, it instructs adding a high-bandwidth link between two routers and verifying routing updates.

    Original Description:

    Pack de Guias Practicas para ejercitarte en el mundo de las Redes.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for configuring the EIGRP routing protocol on a network topology simulated in Packet Tracer. The objectives are to configure EIGRP, encrypt passwords on the routers, and verify EIGRP is functioning properly. The procedure describes configuring six routers with IP addresses and EIGRP, as well as five PCs. It includes commands to verify neighbor adjacency, topology tables, and EIGRP traffic statistics. Finally, it instructs adding a high-bandwidth link between two routers and verifying routing updates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    57 views6 pages

    CCNA Guia Practica 6

    Uploaded by

    Andy
    The document provides instructions for configuring the EIGRP routing protocol on a network topology simulated in Packet Tracer. The objectives are to configure EIGRP, encrypt passwords on the routers, and verify EIGRP is functioning properly. The procedure describes configuring six routers with IP addresses and EIGRP, as well as five PCs. It includes commands to verify neighbor adjacency, topology tables, and EIGRP traffic statistics. Finally, it instructs adding a high-bandwidth link between two routers and verifying routing updates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 6

    UNIVERSIDAD DON BOSCO

    FACULTAD DE ESTUDIOS TECNOLGICOS


    COORDINACIN DE COMPUTACIN
    GUIA No.7 6

    CICLO: 01-2012

    Nombre de la Prctica: Protocolo EIGRP

    Lugar de Ejecucin: CITT, Edificio de Electrnica, Laboratorio de Redes


    Tiempo Estimado: 2 horas 30 minutos
    Materia: Redes de rea Amplia

    I. OBJETIVOS
    Configurara el protocolo de enrutamiento dinmico EIGRP
    Encriptar los password del router
    Verificar el funcionamiento de EIGRP
    II. MATERIALES Y EQUIPO
    Estacin de trabajo PC.
    Simulador de Red (Packet Tracer 5.2)
    Gua de laboratorio
    III. PROCEDIMIENTO
    1. Armar la siguiente topologa en el simulador.

    NOTA:
    esta

    configuracin todas las interfaces S0/0, usan cables DTE, por lo tanto las interfaces S0/1 usan

    Para

    cables DCE.

    2. Configuracin de los routers


    a) Router0
    Router#configure terminal
    Router(config)#hostname Router0
    Router0(config)#service password-encryption
    Router0(config)#enable secret cisco
    Router0(config)#line vty 0 15
    Router0(config-line)#password ciscotel
    Router0(config-line)#login
    Router0(config-line)#exit
    Router0(config)#line console 0
    Router0(config-line)#password cisco
    Router0(config-line)#login
    Router0(config-line)#exit
    Router0(config)#no service password-encryption
    Router0(config)#interface f0/0
    Router0(config-if)#ip address192.168.1.1 255.255.255.0
    Router0(config-if)#no shutdown
    Router0(config-if)#exit
    Router0(config)#interface s0/0
    Router0(config-if)#ip address 192.168.2.1 255.255.255.0
    Router0(config-if)#bandwidth 128000
    Router0(config-if)#no shutdown
    Router0(config-if)#exit
    Router0(config)#exit
    Router0#copy run start
    b) Router1
    Router#configure terminal
    Router(config)#hostname Router1
    Router1(config)#service password-encryption
    Router1(config)#enable secret cisco
    Router1(config)#line vty 0 15
    Router1(config-line)#password ciscotel
    Router1(config-line)#login
    Router1(config-line)#exit
    Router1(config)#line console 0
    Router1(config-line)#password cisco
    Router1(config-line)#login
    Router1(config-line)#exit
    Router1(config)#no service password-encryption
    Router1(config)#interface s0/1
    Router1(config-if)#ip address 192.168.2.2 255.255.255.0
    Router1(config-if)#clock rate 64000
    Router1(config-if)#bandwidth 128000
    Router1(config-if)#no shutdown
    Router1(config-if)#exit
    Router1(config)#interface f0/0
    Router1(config-if)#ip address192.168.3.1 255.255.255.0
    Router1(config-if)#no shutdown
    Router1(config-if)#exit
    Router1(config)#interface s0/0

    Router1(config-if)#ip address 192.168.4.1 255.255.255.0


    Router1(config-if)#bandwidth 128000
    Router1(config-if)#no shutdown
    Router1(config-if)#exit
    Router1(config)#exit
    Router1#copy run start
    c) Router2
    Router#configure terminal
    Router(config)#hostname Router2
    Router2(config)#service password-encryption
    Router2(config)#enable secret cisco
    Router2(config)#line vty 0 15
    Router2(config-line)#password ciscotel
    Router2(config-line)#login
    Router2(config-line)#exit
    Router2(config)#line console 0
    Router2(config-line)#password cisco
    Router2(config-line)#login
    Router2(config-line)#exit
    Router2(config)#no service password-encryption
    Router2(config)#interface s0/1
    Router2(config-if)#ip address 192.168.4.2 255.255.255.0
    Router2(config-if)#clock rate 64000
    Router2(config-if)#bandwidth 128000
    Router2(config-if)#no shutdown
    Router2(config-if)#exit
    Router2(config)#interface f0/0
    Router2(config-if)#ip address192.168.5.1 255.255.255.0
    Router2(config-if)#no shutdown
    Router2(config-if)#exit
    Router2(config)#interface s0/0
    Router2(config-if)#ip address 192.168.6.1 255.255.255.0
    Router2(config-if)#bandwidth 128000
    Router2(config-if)#no shutdown
    Router2(config-if)#exit
    Router2(config)#exit
    Router2#copy run start
    d) Router3
    Router#configure terminal
    Router(config)#hostname Router3
    Router3(config)#service password-encryption
    Router3(config)#enable secret cisco
    Router3(config)#line vty 0 15
    Router3(config-line)#password ciscotel
    Router3(config-line)#login
    Router3(config-line)#exit
    Router3(config)#line console 0
    Router3(config-line)#password cisco
    Router3(config-line)#login
    Router3(config-line)#exit
    Router3(config)#no service password-encryption
    Router3(config)#interface s0/1
    Router3(config-if)#ip address 192.168.6.2 255.255.255.0

    Router3(config-if)#clock rate 64000


    Router3(config-if)#bandwidth 128000
    Router3(config-if)#no shutdown
    Router3(config-if)#exit
    Router3(config)#interface f0/0
    Router3(config-if)#ip address192.168.7.1 255.255.255.0
    Router3(config-if)#no shutdown
    Router3(config-if)#exit
    Router3(config)#interface s0/0
    Router3(config-if)#ip address 192.168.8.1 255.255.255.0
    Router3(config-if)#bandwidth 128000
    Router3(config-if)#no shutdown
    Router3(config-if)#exit
    Router3(config)#exit
    Router3#copy run start
    e) Router4
    Router#configure terminal
    Router(config)#hostname Router4
    Router4(config)#service password-encryption
    Router4(config)#enable secret cisco
    Router4(config)#line vty 0 15
    Router4(config-line)#password ciscotel
    Router4(config-line)#login
    Router4(config-line)#exit
    Router4(config)#line console 0
    Router4(config-line)#password cisco
    Router4(config-line)#login
    Router4(config-line)#exit
    Router4(config)#no service password-encryption
    Router4(config)#interface s0/1
    Router4(config-if)#ip address 192.168.8.2 255.255.255.0
    Router4(config-if)#clock rate 64000
    Router4(config-if)#bandwidth 128000
    Router4(config-if)#no shutdown
    Router4(config-if)#exit
    Router4(config)#interface f0/0
    Router4(config-if)#ip address192.168.9.1 255.255.255.0
    Router4(config-if)#no shutdown
    Router4(config-if)#exit
    Router4(config)#interface s0/0
    Router4(config-if)#ip address 192.168.10.1 255.255.255.0
    Router4(config-if)#bandwidth 128000
    Router4(config-if)#no shutdown
    Router4(config-if)#exit
    Router4(config)#exit
    Router4#copy run start
    f) Router5
    Router#configure terminal
    Router(config)#hostname Router5
    Router5(config)#service password-encryption
    Router5(config)#enable secret cisco
    Router5(config)#line vty 0 15
    Router5(config-line)#password ciscotel

    Router5(config-line)#login
    Router5(config-line)#exit
    Router5(config)#line console 0
    Router5(config-line)#password cisco
    Router5(config-line)#login
    Router5(config-line)#exit
    Router5(config)#no service password-encryption
    Router5(config)#interface s0/1
    Router5(config-if)#ip address 192.168.10.2 255.255.255.0
    Router5(config-if)#clock rate 64000
    Router5(config-if)#bandwidth 128000
    Router5(config-if)#no shutdown
    Router5(config-if)#exit
    Router5(config)#interface f0/0
    Router5(config-if)#ip address192.168.11.1 255.255.255.0
    Router5(config-if)#no shutdown
    Router5(config-if)#exit
    Router5(config)#exit
    Router5#copy run start
    3. Configuracin de las estaciones de trabajo
    a) PC-0: Direccin IP: 192.168.1.2, mscara de subred: 255.255.255.0, gateway: 192.168.1.1
    b) PC-1: Direccin IP: 192.168.3.2, mscara de subred: 255.255.255.0, gateway: 192.168.3.1
    c) PC-2: Direccin IP: 192.168.5.2, mscara de subred: 255.255.255.0, gateway: 192.168.5.1
    d) PC-3: Direccin IP: 192.168.7.2, mscara de subred: 255.255.255.0, gateway: 192.168.7.1
    e) PC-4: Direccin IP: 192.168.9.2, mscara de subred: 255.255.255.0, gateway: 192.168.9.1
    f) PC-5: Direccin IP: 192.168.11.2, mscara de subred: 255.255.255.0, gateway: 192.168.11.1
    4. Configure EIGRP usando el sistema autnomo 100
    a. Router0:
    Router0#configure terminal
    Router0(config)#router eigrp 100
    Router0(config-router)#network 192.168.1.0
    Router0(config-router)#network 192.168.2.0
    Router0(config-router)#CTRL+Z
    b. Router1:
    Router1#configure terminal
    Router1(config)#router eigrp 100
    Router1(config-router)#network 192.168.2.0
    Router1(config-router)#network 192.168.3.0
    Router1(config-router)#network 192.168.4.0
    Router1(config-router)#CTRL+Z
    c. Router2:
    Router2#configure terminal
    Router2(config)#router eigrp 100
    Router2(config-router)#network 192.168.4.0
    Router2(config-router)#network 192.168.5.0
    Router2(config-router)#network 192.168.6.0
    Router2(config-router)#CTRL+Z
    d. Router3:
    Router3#configure terminal

    Router3(config)#router eigrp 100


    Router3(config-router)#network 192.168.6.0
    Router3(config-router)#network 192.168.7.0
    Router3(config-router)#network 192.168.8.0
    Router3(config-router)#CTRL+Z
    e. Router4:
    Router4#configure terminal
    Router4(config)#router eigrp 100
    Router4(config-router)#network 192.168.8.0
    Router4(config-router)#network 192.168.9.0
    Router4(config-router)#network 192.168.10.0
    Router4(config-router)#CTRL+Z
    f. Router5:
    Router5#configure terminal
    Router5(config)#router eigrp 100
    Router5(config-router)#network 192.168.10.0
    Router5(config-router)#network 192.168.11.0
    Router5(config-router)#CTRL+Z
    g. Verifique ahora las tablas de enrutamiento de cada uno de los router con el comando show ip route
    h. Verifique la conectividad entre las redes de rea local con las herramientas Ping y Traceroute desde las
    estaciones de trabajo o desde los router, fjese bien en las rutas que siguen los paquetes.
    5. Verificacin del funcionamiento de EIGRP
    a. Mostrar los router vecinos descubiertos por EIGRP en cada uno de los routers
    Router1#show ip eigrp neighbors
    b. Mostrar la tabla topolgica creada por EIGRP en cada uno de los routers
    Router1#show ip eigrp topology all-links
    c. Visualizar las estadsticas de trfico EIGRP entre los enrutadores:
    Router1#show ip eigrp traffic

    IV. DISCUSIN DE RESULTADOS


    Agregue un enlace serial de 2048000 kbps entre el Router2 y el Router5, para ello utilice la direccin de red

    192.168.12.0 y publquela en el proceso de enrutamiento de eigrp 100 que tiene configurado.


    Verifique nuevamente las tablas de los router y comprueba la conectividad, haga trazados de rutas para
    comparar con las trazas del punto 4.h. Saque sus conclusiones.

    You might also like