Delivery conditions
Geometric tolerances of hot rolled steel sheet piles according to EN 10248 (reduced tolerances on request)
Tolerances AU, PU, PU-R, GU nN as 500 Hem
Mass
Length 200 200 mn 200 mm 206
Height H> 200 mm: £5.90) 200 s
Thickness — . . “
Width single ple 2 2
Width double pile 3
Straightness 2% of ple lng 0.2% of h 0.2% of ple eng (0.2% of ple length
Ends out of square wa 2% of ple wit a of ple width
section AZ _AUPU___PU-R___GUsp”__GUdp!”__ASSOO_—_—-HZM_—_—RH/RZ_OMEGA18_C9/C14_DELTA3
Sheet pile sections are normally supplied without
holes. If r they can be provided with handling Tr T |
holes in the centerline of the section. The standard xt x a :
handlin 35 follows:
dimensior
Diameter 0 tn}
The following mark
~ Colour mar
Adhesive sticke
order number, typ
can be supplied on requestSteel grades of sheet pile sections
PU, PU-R, AS and HZM sections are delivered in sections: available up to S 320 GP, please contac
2 steel grades based on EN 10248-1 mentioned below, for S 355 GP.
Steel grade Min yield Min.tensle Min. elongation Chemical composition (% max)
eN10248 strength Ren strength ‘Lar 5.65/Se
s270GP 270 0 2 5 5
s3206° 320 : .
s390G° 390
s430cP 430 0 027 7m 0 0050 0.050 0
Mill specification
5.460 AP 460 0 . x
10 other specifications including S 4 vanisation has an influence o
65 as well as special steels with improved composition of the steel and must the
resistance (ASTM A 690), or copper additior he purchase ord
fance with EN 10 t 1 Chapter ‘anbe We strongly recommend informing us of all surface
supplied on reques treatment to be applied to the product when placing
A modified grade A 690 with higher yield strength is orders.
avail on request
eN10249 __s270GP__—_—$3206°. $.3556P s430Ge __$.460.P»
46 / Delivery conditionsGeometric tolerances of tubular piles
Tolerance on pile length: +/- 200 mm
Standard Outside diameter _—Wallthckness—_—_—Straightness out-of Mass Maximum weld
D t roundness bead height?
eN10219-2 wa 0.20% te14235
B of total length 1314248
1422 oit <7 +f 15% 1513035
aPISL 4 020% | p< 1422 iso 7108 113045
so21e2 21422 asagreed of total lengt Ese as aged gee
od for submegedac-weled halo sation
Note vas rn xcept here sped
Steel grades of tubular
Steel grade Min yield Min. yield Min. ultimete Mi Chemical composition (% max)
EN10219-1 strength Rew strength Ray tensile strength Ry elongation Le
(ts 16mm) (16