M

P
S
A
4
2

/

M
M
B
T
A
4
2

/

P
Z
T
A
4
2
NPN High Voltage Amplifier
This device is designed for application as a video output to
drive color CRT and other high voltage applications. Sourced
from Process 48.
MMBTA42 MPSA42
Absolute Maximum Ratings* TA = 25C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Symbol Parameter Value Units
VCES Collector-Emitter Voltage 300 V
VCBO Collector-Base Voltage 300 V
VEBO Emitter-Base Voltage 6.0 V
IC Collector Current - Continuous 500 mA
TJ, Tstg
Operating and Storage Junction Temperature Range -55 to +150 C
Thermal Characteristics TA = 25C unless otherwise noted
Symbol Characteristic Max Units
MPSA42 *MMBTA42 **PZTA42
P
D
Total Device Dissipation
Derate above 25C
625
5.0
350
2.8
1,000
8.0
mW
mW/C
RJC
Thermal Resistance, Junction to Case 83.3 C/W
RJA
Thermal Resistance, Junction to Ambient 200 357 125 C/W
PZTA42
C
B
E
TO-92
C
B
E
SOT-23
Mark: 1D
B
C
C
SOT-223
E
*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."
**Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm
2
.
2000 Fairchild Semiconductor International MPSA42/MMBTA42/PZTA42 Rev A
M
P
S
A
4
2

/

M
M
B
T
A
4
2

/

P
Z
T
A
4
2
Electrical Characteristics TA = 25C unless otherwise noted
OFF CHARACTERISTICS
Symbol Parameter Test Conditions Min Max Units
V
(BR)CEO
Collector-Emitter Breakdown Voltage* I
C
= 1.0 mA, I
B
= 0 300 V
V
(BR)CBO
Collector-Base Breakdown Voltage I
C
= 100 A, I
E
= 0 300 V
V
(BR)EBO
Emitter-Base Breakdown Voltage I
E
= 100 A, I
C
= 0 6.0 V
I
CBO
Collector-Cutoff Current V
CB
= 200 V, I
E
= 0 0.1 A
I
EBO
Emitter-Cutoff Current V
EB
= 6.0 V, I
C
= 0 0.1 A
SMALL SIGNAL CHARACTERISTICS
ON CHARACTERISTICS*
h
FE
DC Current Gain I
C
= 1.0 mA, V
CE
= 10 V
I
C
= 10 mA, V
CE
= 10 V
I
C
= 30 mA, V
CE
= 10 V
25
40
40
V
CE(sat)
Collector-Emitter Saturation Voltage I
C
= 20 mA, I
B
= 2.0 mA 0.5 V
V
BE(sat)
Base-Emitter Saturation Voltage I
C
= 20 mA, I
B
= 2.0 mA 0.9 V
*Pulse Test: Pulse Width 300 s, Duty Cycle 2.0%
Spice Model
NPN (Is=34.9f Xti=3 Eg=1.11 Vaf=100 Bf=2.65K Ne=1.708 Ise=16.32p Ikf=23.79m Xtb=1.5 Br=9.769 Nc=2
Isc=0 Ikr=0 Rc=7 Cjc=14.23p Mjc=.5489 Vjc=.75 Fc=.5 Cje=49.62p Mje=.4136 Vje=.75 Tr=934.3p Tf=1.69n
Itf=5 Vtf=20 Xtf=150 Rb=10)
f
T
Current Gain - Bandwidth Product I
C
= 10 mA, V
CE
= 20 V,
f = 100 MHz
50 MHz
C
cb
Collector-Base Capacitance V
CB
= 20 V, I
E
= 0, f = 1.0 MHz 3.0 pF
NPN High Voltage Amplifier
(continued)
Typical Characteristics
DC Current Gain
vs Collector Current
0.1 1 10 100
20
40
60
80
100
120
140
I - COLLECTOR CURRENT (mA)
h






-

D
C

C
U
R
R
E
N
T

G
A
I
N
F
E
- 40 C
25 C
C
V = 5V
CE
125 C
Collector-Emitter Saturation
Voltage vs Collector Current
P
0.1 1 10 100
0.05
0.1
0.15
0.2
0.25
0.3
I - COLLECTOR CURRENT (mA)
V







-

C
O
L
L
E
C
T
O
R
-
E
M
I
T
T
E
R

V
O
L
T
A
G
E

(
V
)
C
E
S
A
T
C
= 10
- 40 C
25 C
125 C
M
P
S
A
4
2

/

M
M
B
T
A
4
2

/

P
Z
T
A
4
2
NPN High Voltage Amplifier
(continued)
Typical Characteristics (continued)
Base-Emitter Saturation
Voltage vs Collector Current
0.1 1 10 100
0.2
0.4
0.6
0.8
1
I - COLLECTOR CURRENT (mA)
V







-

B
A
S
E
-
E
M
I
T
T
E
R

V
O
L
T
A
G
E

(
V
)
B
E
S
A
T
C
= 10
- 40 C
25 C
125 C
Base-Emitter ON Voltage vs
Collector Current
0.1 1 10 100
0.2
0.4
0.6
0.8
1
I - COLLECTOR CURRENT (mA)
V







-

B
A
S
E
-
E
M
I
T
T
E
R

O
N

V
O
L
T
A
G
E

(
V
)
B
E
(
O
N
)
C
V = 1V
CE
- 40 C
25 C
125 C
Collector-Cutoff Current
vs Ambient Temperature
P
25 50 75 100 125 150
1
10
100
T - AMBIENT TEMPERATURE ( C)
I





-

C
O
L
L
E
C
T
O
R

C
U
R
R
E
N
T

(
n
A
)
A
V = 150V
CB

C
B
O
Collector-Base and Emitter-Base
Capacitance vs Reverse Bias Voltage
1 10 100 1000
1
2
5
10
20
50
100
REVERSE BIAS VOLTAGE (V)
C
A
P
A
C
I
T
A
N
C
E

(
p
F
)
C
cb
C
eb
T = 25 C
A
Power Dissipation vs
Ambient Temperature
0 25 50 75 100 125 150
0
0.25
0.5
0.75
1
TEMPERATURE ( C)
P



-

P
O
W
E
R

D
I
S
S
I
P
A
T
I
O
N

(
W
)
D
o
SOT-223
TO-92
SOT-23
TO-92 Tape and Reel Data and Package Dimensions
September 1999, Rev. B
TO-92 Packaging
Configuration: Figure 1.0
AMMO PACK OPTION
See Fig 3.0 for 2 Ammo
Pack Options
2000 units per
EO70 box for
std option
FSCINT Label
530mm x 130mm x

83mm
Intermediate box
10,000 units maximum
per

intermediate box
for std option
FSCINT Label
114mm x 102mm x 51mm
Immediate Box
Anti-static
Bubble Sheets
(TO-92) BULK PACKING INFORMATION
EOL
CODE
DESCRIPTION
LEADCLIP
DIMENSION
QUANTITY
J18Z TO-18 OPTION STD NO LEAD CLIP 2.0 K / BOX
J05Z TO-5 OPTION STD NO LEAD CLIP 1.5 K / BOX
NO EOL
CODE
TO-92 STANDARD
STRAIGHT
NO LEADCLIP 2.0 K / BOX
BULK OPTION
See Bulk Packing
Information table
375mm x 267mm x 375mm
Intermediate Box
FSCINT
Label
Customized
Label
333mm x 231mm x 183mm
Intermediate Box
FSCINT
Label
Customized
Label
TO-92 TNR/AMMO PACKING INFROMATION
Packing Style Quantity EOL code
Reel A 2,000 D26Z
E 2,000 D27Z
Ammo M 2,000 D74Z
P 2,000 D75Z
Unit weight = 0.22 gm
Reel weight with components = 1.04 kg
Ammo weight with components = 1.02 kg
Max quantity per intermediate box = 10,000 units
F63TNR
Label
5 Ammo boxes per
Intermediate Box
Customized
Label
327mm x 158mm x 135mm
Immediate Box
LOT: CBVK741B019
NSID: PN2222N
D/C1: D9842 SPEC REV: B2
SPEC:
QTY: 10000
QA REV:
FAIRCHILD SEMICONDUCTOR CORPORATION HTB:B
(FSCINT)
F63TNR
Label
Customized
Label
5 Reels per
Intermediate Box
TAPE and REEL OPTION
See Fig 2.0 for various
Reeling Styles
LOT: CBVK741B019
FSID: PN222N
D/C1: D9842 QTY1: SPEC REV:
SPEC:
QTY: 2000
D/C2: QTY2: CPN:
N/F: F (F63TNR)3
F63TNR Label sample
FSCINT Label sample
C
5 EO70 boxes per
intermediate Box
ustomized
Label
TO-92 Tape and Reel Data and Package Dimensions, continued
September 1999, Rev. B
TO-92 Reeling Style
Configuration: Figure 2.0
Style A, D26Z, D70Z (s/h)
Machine Option A (H)
Style E, D27Z, D71Z (s/h)
Machine Option E (J)
FIRST WIRE OFF IS EMITTER
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON BOTTOM

ORDER STYLE
D75Z (P)
FIRST WIRE OFF IS COLLECTOR
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON TOP

ORDER STYLE
D74Z (M)
TO-92 Radial Ammo Packaging
Configuration: Figure 3.0
FIRST WIRE OFF IS EMITTER (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON TOP
ITEM DESCRIPTION
Base of Package to Lead Bend
Component Height
Lead Clinch Height
Component Base Height
Component Alignment ( side/side )
Component Alignment ( front/back )
Component Pitch
Feed Hole Pitch
Hole Center to First Lead
Hole Center to Component Center
Lead Spread
Lead Thickness
Cut Lead Length
Taped Lead Length
Taped Lead Thickness
Carrier Tape Thickness
Carrier Tape Width
Hold - down Tape Width
Hold - down Tape position
Feed Hole Position
Sprocket Hole Diameter
Lead Spring Out
SYMBOL
b
Ha
HO
H1
Pd
Hd
P
PO
P1
P2
F1/F2
d
L
L1
t
t1
W
WO
W1
W2
DO
S
DIMENSION
0.098 (max)
0.928 (+/- 0.025)
0.630 (+/- 0.020)
0.748 (+/- 0.020)
0.040 (max)
0.031 (max)
0.500 (+/- 0.020)
0.500 (+/- 0.008)
0.150 (+0.009, -0.010)
0.247 (+/- 0.007)
0.104 (+/- 0 .010)
0.018 (+0.002, -0.003)
0.429 (max)
0.209 (+0.051, -0.052)
0.032 (+/- 0.006)
0.021 (+/- 0.006)
0.708 (+0.020, -0.019)
0.236 (+/- 0.012)
0.035 (max)
0.360 (+/- 0.025)
0.157 (+0.008, -0.007)
0.004 (max)
Note : All dimensions are in inches.
ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM
Reel Diameter D1 13.975 14.025
Arbor Hole Diameter (Standard) D2 1.160 1.200
(Small Hole) D2 0.650 0.700
Core Diameter D3 3.100 3.300
Hub Recess Inner Diameter D4 2.700 3.100
Hub Recess Depth W1 0.370 0.570
Flange to Flange Inner Width W2 1.630 1.690
Hub to Hub Center Width W3 2.090
Note: All dimensions are inches
TO-92 Tape and Reel Taping
Dimension Configuration: Figure 4.0
Ha
H1 HO
PO
P2
P1 F1
DO
P Pd
b
d
L1
L
S
WO
W2
W
t
t1
Hd
W1
TO-92 Reel
Configuration: Figure 5.0
User Direction of Feed
SENSI TIVE DEVICES
ELECTROSTATIC
D1
D3
Customized Label
W2
W1
W3
F63TNR Label
D4
D2
TO-92 Tape and Reel Data and Package Dimensions, continued
July 1999, Rev. A
TO-92 (FS PKG Code 92, 94, 96)
TO-92 Tape and Reel Data and Package Dimensions
January 2000, Rev. B
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.1977
SOT-23 Packaging
Configuration: Fi gure 1.0
Components
Leader Tape
500mm minimumor
125 empty pockets
Trailer Tape
300mm minimumor
75 empt y pockets
SOT-23 Tape Leader and Trailer
Configuration: Fi gure 2.0
Cover Tape
Carri er Tape
Note/Comments
PackagingOption
SOT-23 PackagingInformation
Standard
(no fl ow code)
D87Z
Packagingtype
Reel Size
TNR
7" Di a
TNR
13"
Qty per Reel/Tube/Bag 3,000 10,000
Box Dimension (mm) 187x107x183 343x343x64
Max qty per Box 24,000 30,000
Weight per unit (gm) 0.0082 0.0082
Weight per Reel (kg) 0.1175 0.4006
Human readable
Label
Human Readable Label
Human Readable Label sample
343mmx 342mmx 64mm
Intermediate box for L87Z Option
187mmx 107mmx 183mm
Intermediate Box for Standard Opti on
SOT-23 Unit Orientation
3P 3P 3P 3P
Human Readable
Label
Customized Label
Embossed
Carrier Tape
Antistatic Cover Tape
Packaging Description:
SOT-23
made from a dissi pati ve (carbon fi l led) polycarbonate
resin. The cover tape is a multilayer film (Heat Acti vated
Adhesive in nature) primaril y composed of polyester film,
adhesi ve layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
3,000 uni ts per 7" or 177cm diameter reel. The reels are
dark bluein color and is madeof polystyrene plastic (anti-
static coated). Other option comes in 10,000 units per 13"
or 330cm diameter reel. Thi s and some other opti ons are
described in the Packaging Information table.
These full reel s areindividually labeled and pl aced insi de
a standard intermediate made of recycl abl e corrugated
brown paper with a Fai rchil d l ogo pri nti ng. One pizza box
contains eight reels maximum. And these intermediate
boxes are placed insi de a label ed shipping box whi ch
comesi n different sizes depending on the number of parts
shi pped.
parts are shipped in tape. The carrier tape is
SOT-23 Tape and Reel Data and Package Dimensions
September 1999, Rev. C
Dimensions are in millimeter
Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc
SOT-23
(8mm)
3.15
+/-0.10
2.77
+/-0.10
8.0
+/-0.3
1.55
+/-0.05
1.125
+/-0.125
1.75
+/-0.10
6.25
min
3.50
+/-0.05
4.0
+/-0.1
4.0
+/-0.1
1.30
+/-0.10
0.228
+/-0.013
5.2
+/-0.3
0.06
+/-0.02
Dimensions are in inches and millimeters
Tape Size
Reel
Option
Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
8mm 7" Dia
7.00
177.8
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
2.165
55
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 0.429
7.9 10.9
8mm 13" Dia
13.00
330
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
4.00
100
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 0.429
7.9 10.9
See detail AA
Dim A
max
13" Diameter Option
7" Diameter Option
Dim A
Max
See detail AA
W3
W2 max Measured at Hub
W1 Measured at Hub
Dim N
Dim D
min
Dim C
B Min
DETAIL AA
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum component rotation
0.5mm
maximum
0.5mm
maximum
Sketch C (Top View)
Component lateral movement
Typical
component
cavity
center line
20 deg maximum
Typical
component
center line
B0
A0
Sketch B (Top View)
Component Rotation
Sketch A (Side or Front Sectional View)
Component Rotation
User Direction of Feed
SOT-23 Embossed Carrier Tape
Configuration: Figure 3.0
SOT-23 Reel Configuration: Figure 4.0
P1 A0
D1
F W
E1
E2
Tc
Wc
K0
T
B0
D0 P0 P2
SOT-23 Tape and Reel Data and Package Dimensions, continued
September 1999, Rev. C
SOT-23 (FS PKG Code 49)
SOT-23 Tape and Reel Data and Package Dimensions, continued
September 1998, Rev. A1
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.0082
SOT-223 Packaging
Configuration: Figure 1.0
Components
Leader Tape
500mm minimum or
62 empty pockets
Trailer Tape
300mm minimum or
38 empty pockets
SOT-223 Tape Leader and Trailer
Configuration: Figure 2.0
Cover Tape
Carrier Tape
Note/Comments
Packaging Option
SOT-223 Packaging Information
Standard
(no flow code)
D84Z
Packaging type
Reel Size
TNR
13" Dia
TNR
7" Dia
Qty per Reel/Tube/Bag 2,500 500
Box Dimension (mm) 343x64x343 184x187x47
Max qty per Box 5,000 1,000
Weight per unit (gm) 0.1246 0.1246
Weight per Reel (kg) 0.7250 0.1532
SOT-223 Unit Orientation
F852
014
F852
014
F852
014
F852
014
F63TNR Label
343mm x 342mm x 64mm
Intermediate box for Standard
184mm x 184mm x 47mm
Pizza Box for D84Z Option
F63TNR Label
LOT: CBVK741B019
FSID: PN2222A
D/C1: D9842 QTY1: SPEC REV:
SPEC:
QTY: 3000
D/C2: QTY2: CPN:
N/F: F (F63TNR)3
F63TNR Label sample
F63TNR Label
Antistatic Cover Tape
Customized Label
Static Dissipative
Embossed Carrier Tape
Packaging Description:
SOT-223 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
2,500 units per 13" or 330cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (anti-
static coated). Other option comes in 500 units per 7" or
177cm diameter reel. This and some other options are
further described in the Packaging Information table.
These full reels are individually barcode labeled and
placed inside a standard intermediate box (illustrated in
figure 1.0) made of recyclable corrugated brown paper.
One box contains two reels maximum. And these boxes
are placed inside a barcode labeled shipping box which
comes in different sizes depending on the number of parts
shipped.
SOT-223 Tape and Reel Data and Package Dimensions
September 1999, Rev. B
Dimensions are in millimeter
Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc
SOT-223
(12mm)
6.83
+/-0.10
7.42
+/-0.10
12.0
+/-0.3
1.55
+/-0.05
1.50
+/-0.10
1.75
+/-0.10
10.25
min
5.50
+/-0.05
8.0
+/-0.1
4.0
+/-0.1
1.88
+/-0.10
0.292
+/-
0.0130
9.5
+/-0.025
0.06
+/-0.02
P1 A0 D1
P0
F
W
E1
D0
E2
B0
Tc
Wc
K0
T
Dimensions are in inches and millimeters
Tape Size
Reel
Option
Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
12mm 7" Dia
7.00
177.8
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
5.906
150
0.488 +0.078/-0.000
12.4 +2/0
0.724
18.4
0.469 0.606
11.9 15.4
12mm 13" Dia
13.00
330
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
7.00
178
0.488 +0.078/-0.000
12.4 +2/0
0.724
18.4
0.469 0.606
11.9 15.4
See detail AA
Dim A
max
13" Diameter Option
7" Diameter Option
Dim A
Max
See detail AA
W3
W2 max Measured at Hub
W1 Measured at Hub
Dim N
Dim D
min
Dim C
B Min
DETAIL AA
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum component rotation
0.5mm
maximum
0.5mm
maximum
Sketch C (Top View)
Component lateral movement
Typical
component
cavity
center line
20 deg maximum
Typical
component
center line
B0
A0
Sketch B (Top View)
Component Rotation
Sketch A (Side or Front Sectional View)
Component Rotation
User Direction of Feed
SOT-223 Embossed Carrier Tape
Configuration: Figure 3.0
SOT-223 Reel Configuration: Figure 4.0
SOT-223 Tape and Reel Data and Package Dimensions, continued
July 1999, Rev. B
SOT-223 (FS PKG Code 47)
SOT-223 Tape and Reel Data and Package Dimensions, continued
1 : 1
Scale 1:1 on letter size paper
Part Weight per unit (gram): 0.1246
September 1999, Rev. C
TRADEMARKS
ACEx
Bottomless
CoolFET
CROSSVOLT
E
2
CMOS
TM
FACT
FACT Quiet Series
FAST
FASTr
GTO
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
SuperSOT-8
SyncFET
TinyLogic
UHC
VCX
HiSeC
ISOPLANAR
MICROWIRE
POP
PowerTrench
QFET
QS
Quiet Series
SuperSOT-3
SuperSOT-6

Rev. E