Mini 3dx Plans Tiled A4
Mini 3dx Plans Tiled A4
Mini 3dx Plans Tiled A4
Inch Scale
0 1 2 3 4 5 6
All parts are cut from 3mm Depron unless oth
Aileron Servo
herwise noted
Mini
Wingspan: 32"
Wing Area: 243 sq. in
Weight: 6-8oz.
Motor: Axi 2208/34, CD ROM
Aileron
3DX
Designed and Drawn By:
Tim Hart
M www.foamyfactory.com
Copyright 2004, Foamy Factory Models, Timothy Hart
Outer Wheel Pant
Elevator cut line (3mm depron - M
Elev. a
Servo Cutout
after model
n component
h to allow
e CG.
Wing
.039" wire
Starting point at 3 1/4 from
3mm x .8mm Carbon
of wing at fuselage joint.
nservative CG, move aft for 3D)
Aileron
3mm Depron Fuselage Doublers - top and bottom and both sides
(add after fire wall is glued to fuse.)
strips along leading and trailing edges of wing
cut line
Only 1
CG
Aileron Servo cutout (only on right side of wing)
1/2 of wing is shown. Cut full wing from one piece of 3mm Depron