JPEG UART Camera Tutorial
JPEG UART Camera Tutorial
JPEG UART Camera Tutorial
Page 1 of 8
Hardware needed
1. The camera itself
Hardware connection
TXD(out) of camera is connected to pin 2 (RXD) of the DE-9 FEMALE. RXD(in) of camera is connected to pin 3 (TXD) of the DE-9 FEMALE. GND of camera is connected to pin 5 (GND) of the DE-9 FEMALE, and also connected to GND of Power. +5V of camera is connected to power.
Page 2 of 8
A photo of setup:
Software Needed
X-CTU from digi.com Evaluation Utility: http://www.linksprite.com/download/showdownload.php?id=36&lang=en
Test Procedure
Page 3 of 8
Page 4 of 8
Click Open under the COM/Data Rate Section. Modify the path for capture files. Note: this is a must. If the path is pointing to an invalid or unwritable location, the program may crash.
Page 5 of 8
Page 6 of 8
Page 7 of 8
LinkSprite Technologies, Inc. Add: 1410 Cannon Mountain Dr, Longmont, CO 80503 Tel: 720-204-8599 Email: sales@linksprite.com Technical support: support@linksprite.com Web: www.linksprite.com
Page 8 of 8