Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    Wire Line Report (02) 23 Oct 2012

    Uploaded by

    Felix Ezekiel-hart
    The document is a wireline report detailing operations at a well. It provides general well data and describes a wireline operation to run gauge cutters and an Otis x-mandrel tool. During the operation, an obstruction was encountered at 318m due to a landing nipple, and the x-mandrel accidentally set at 152m, requiring the x-running tool to be pulled out. In the end, no tools remained in the hole.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    Wire Line Report (02) 23 Oct 2012

    Uploaded by

    Felix Ezekiel-hart
    35 views1 page
    The document is a wireline report detailing operations at a well. It provides general well data and describes a wireline operation to run gauge cutters and an Otis x-mandrel tool. During the operation, an obstruction was encountered at 318m due to a landing nipple, and the x-mandrel accidentally set at 152m, requiring the x-running tool to be pulled out. In the end, no tools remained in the hole.

    Original Description:

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is a wireline report detailing operations at a well. It provides general well data and describes a wireline operation to run gauge cutters and an Otis x-mandrel tool. During the operation, an obstruction was encountered at 318m due to a landing nipple, and the x-mandrel accidentally set at 152m, requiring the x-running tool to be pulled out. In the end, no tools remained in the hole.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    35 views1 page

    Wire Line Report (02) 23 Oct 2012

    Uploaded by

    Felix Ezekiel-hart
    The document is a wireline report detailing operations at a well. It provides general well data and describes a wireline operation to run gauge cutters and an Otis x-mandrel tool. During the operation, an obstruction was encountered at 318m due to a landing nipple, and the x-mandrel accidentally set at 152m, requiring the x-running tool to be pulled out. In the end, no tools remained in the hole.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    WIRE LINE REPORT

    District/Affiliated Company
    DATE: 10/23/2012 DCW11

    WELL NAME FIELD NAME Cost Centre

    SINGLE COMPLETION DUAL COMPLETION


    General Data RKB Elevation @ m. Tubing Size OD [inch] Tubing Size OD [inch] Tubing Shoe [inch] Packer data Minimum I.D. String [inch] Previous Bottom Hole Requested Operation @ m. 1.81'' AH landing nipple 2 3/8 Weight [lb/ft] Weight [lb/ft] 0 4.7

    SELECTIVE

    SHORT STRING LONG STRING

    Well Code
    Flange

    Tbg Spool @ m. @ m. @ m. @ m. @ m. 725

    Top Flange [inch] Flowing Flange [inch] Kill Line Flange [inch] BPV Type

    Psi Psi Psi [inch] 2''

    TSP (Breda)

    THP Annulus Annulus / / /

    Wellhead Pressure Check [Kg/cm2] CHP P P P

    [Kg/cm2] [Kg/cm2] [Kg/cm2] [Kg/cm2]

    Calibrate short string.

    Annulus POOL Perforated Zones

    Open Hole To [m]

    From [m]

    Note

    Operation Description

    1. Safety briefing 2. Rigged up the wireline surface equipment ( lubricator, stuffing box , BOP, deflection sheaves , load cell ) 3. Prepared the wireline string for running gauge cutters Wireline string components used i. Link jar Dia. 1- 1/2" 5ft long ii Standard sinker bar Dia. 1-1/2" 4ft long iii Heavy weight sinker bar ( Tungsten) Dia. 1-1/2" 4ft long iv Rope socket - No Knot Dia. 1-1/2" 1ft long v Two sets of Gauge cutters Dia. 1-1/2" 1ft long and Dia. 2.31" 1ft long 4. During the RIH and POOH of the 1-1/2" gauge cuttter, an obstruction was observed at 318m ( due to a landing nipple) 5. Assembled an Otis X-mandrel with equalizing valve size 2-1/2" and an Otis X-running tool to be runned to a depth of 162m 6 observed that the lock mandrel was accidentally set at the first LN (depth of 152m) 7. Pulled out the X- running tool to the lubricator

    Situation after the Job NO TOOLS IN HOLE TSV Note BPV SCSSV PLUG OTHER TOOLS Actual Bottom Hole [m]: Max Size Run in Hole [inch] Supervisor Superintendent @m

    You might also like