Conectați o imprimantă¶
Instalarea imprimantei se poate face în câțiva pași simpli. Imprimanta poate fi folosită pentru a imprima chitanțe, etichete, comenzi sau chiar rapoarte din diferite aplicații Odoo. În plus, acțiunile imprimantei pot fi atribuite ca acțiune pe un declanșator în timpul procesului de fabricație sau adăugate la un punct de control al calității sau un control al calității.
Atenționare
The only way to connect a printer directly to an Odoo database is through the use of an IoT box.
Without an IoT box, printing can still occur, but it is managed through the printer itself, which is not the recommended process.
Conectare¶
The IoT box supports printers connected through USB, network connection, or Bluetooth. Supported printers are detected automatically, and appear in the Devices list of the IoT app.
Notă
Printers can take up to two minutes to appear in the IoT app Devices list.
Legați imprimanta¶
Conectați imprimanta la comenzile de lucru¶
Comenzile de lucru pot fi legate de imprimante, printr-un punct de control al calității, pentru a imprima etichete pentru produsele fabricate.
În aplicația de calitate, un dispozitiv poate fi configurat pe un punct de control al calității. Pentru a face acest lucru, accesați
și deschideți punctul de control dorit la care va fi conectată imprimanta.Important
O Operațiune de fabricație și Operațiune de comandă de lucru trebuie atașate la un punct de control al calității înainte ca câmpul Type să permită selectarea opțiunii Print Label.
De aici, editați punctul de control, selectând câmpul Type și selectând Print Label din meniul derulant de opțiuni. Procedând astfel, dezvăluie un câmp numit Dispozitiv, unde poate fi selectat dispozitivul atașat. Salvați modificările, dacă este necesar.
Imprimanta poate fi acum utilizată cu punctul de control al calității selectat. Când punctul de control al calității este atins în timpul procesului de fabricație, baza de date prezintă opțiunea de a imprima etichete pentru un anumit produs.
Sfat
Punctele de control al calității pot fi accesate și navigând la Puncte de control al calității, unde pot fi adăugate împreună cu dispozitivul.
, apoi selectați dispozitivul. Există o filăNotă
On a quality check detail form, the Type of check can also be specified to Print Label. To create new quality checks, navigate to .
Conectați imprimanta la rapoarte¶
It is possible to link report types to a specific printer. In the IoT app, go to the Devices menu, and select the desired printer to be configured.
From here, go to the Printer Reports tab, and click Add a line. In the window that appears, check all the types of Reports that should be linked to this printer.
Sfat
Reports can also be configured in the Technical menu of the Settings app, while in debug mode. To do that, navigate to . From here, select the desired report from the list. Then, an IoT Device can be set on the report.
The first time a linked report is selected to print, a Select Printers pop-up window appears. Tick the checkbox next to the correct printer for the report, and click Print. At that point, the report is linked to the printer.
Clear device printer cache¶
After a printer is linked to print a report, the setting is saved in a browser’s cache. This means a user can have different devices saved in their cache for different reports, based on the device they use to access Odoo. It also means different users can have a report automatically printed from different printers, based on their preferences.
To unlink a report from a printer, navigate to Unlink button next to each report to remove the link.
. This generates a list of reports that are linked to a printer on the current device. Click theImportant
This step only prevents the report from automatically printing to the listed printer from the current browser. The report is still linked on the device, under the Printer Reports tab.
Vedeți și