Recrutare¶

Odoo keeps all job applicants organized with a pre-configured series of steps and stages that each applicant goes through. Each stage has a specific step(s) that should be performed. These range from scheduling a phone call, conducting an interview, to sending a job offer, just to name a few. This process is referred to as the «applicant flow».

Atunci când un solicitant aplică pentru o poziție de muncă, un carte de solicitant este creat automat în aplicația Recrutare Odoo pentru postul respectiv. Pe măsură ce solicitantul avansează prin canalul de recrutare, echipa de recrutare își mută cardul de la o etapă la alta.

Etapele pot fi configurate astfel încât un e-mail să fie trimis automat folosind un șablon pre-configurat, de îndată ce cardul unui solicitant intră într-o etapă. Aceste e-mailuri automate sunt definite în fiecare etapă a fluxului de solicitant.

Fluxul de solicitant explicat în acest document este fluxul implicit în Odoo și trece prin fluxul de solicitant atunci când utilizați configurația implicită a aplicației Recrutare. Fluxul de solicitanți poate fi modificat pentru a se potrivi fluxului specific de recrutare pentru orice afacere.

Vizualizare Kanban¶

To access the kanban view for a job position, navigate to the main Recruitment app dashboard, which is the default view when opening the application. All job positions appear on the main dashboard. Click the New Applications smart button on a job position card to navigate to the kanban view for all the applicants for that particular job position.

Inside the job application, the kanban stages appear, with all the applicants populated in their respective columns, indicating what stage they are currently in. There are five default stages in Odoo:

• Calificare inițială

• Primul interviu

• Al doilea interviu

• Propunere de contract

• Contract Semnat

The last column, Contract Signed, is folded by default, meaning that the column appears in gray and the applicants in it are hidden from view. To expand the folded stage and view the applicant cards for that column, click anywhere on the thin gray column that says the stage name and the column expands, revealing the applicants.

Each stage has a color-coded bar beneath the stage name, giving information about the applicant’s status in the stage. The colors are:

• Green: there are applicants in the stage with an activity that is either already scheduled or needs to be scheduled in the future (such as a phone call or interview), according to the parameters for that particular stage.

• Yellow: there are applicants in the stage with an activity either scheduled for today or due to be scheduled today.

• Red: there are applicants in the stage with overdue activities which need to be scheduled.

• Gray: there are either no activities currently scheduled and no future activities that are required to be scheduled, or there are no applicants currently in the stage.

Personalizați etapele¶

Etapele pot fi modificate, adăugate sau șterse pentru a satisface cel mai bine nevoile anumitor etape de angajare ale unei companii.

Etapă nouă¶

To create a new stage, click on + Add a Column and a new column appears. Enter the title for the new stage in the Column title field, then click Add. The new column appears, and another new stage is available to create. If no new stages are needed, click anywhere on the screen to exit the new column creation.

Modificați etapa¶

To modify the settings of a stage, hover over the name of the stage, and a ⚙️ (gear) icon appears in the upper right hand side of the stage. Click on the ⚙️ (gear) icon and a menu appears. Then click on the Edit Stage option. An Edit Column form appears. Make any modifications to the form, then click Save when done.

Edit column form¶

The Edit Column form is where the stage’s settings are configured. The only required fields are the Stage Name, and the Tooltips section.

Câmpurile care trebuie completate sau modificate sunt:

• Stage Name: introduceți un nume pentru scena.

• Email Template: select an email template to be used from the drop-down menu. If a template is selected, when the applicant card enters the stage, an email will automatically be sent to the applicant using the selected template.

• Folded in Kanban: bifați caseta pentru ca scena să apară oricând pliată (ascunsă) în vizualizarea implicită.

• Etapa Angajată: bifați caseta dacă această etapă indică faptul că solicitantul este angajat. Când cardul unui solicitant intră în această etapă, cardul afișează un banner Angajat în colțul din dreapta sus. Dacă această casetă este bifată, această etapă este utilizată pentru a determina data angajării unui solicitant.

• Job Specific: if the stage only applies to a specific job position(s), select the job position(s) from the drop-down menu. Multiple job positions can be selected.

• Show in Referrals: check the box if this stage should be seen in the Referrals application, and allow the referrer to accrue points when a referral of theirs reaches this stage. If this is active, a Points field appears. Enter the amount of referral points the employee receives when an applicant enters this stage.

• Tooltips section: there are three pre-configured labels (colored circles) for each applicant’s card, indicating its status. These colors are displayed at the top of each stage to reflect the statuses of the applicants in the stage. The names for the label can be modified, but the label itself (the color) cannot. The default names and labels are: In Progress (gray), Blocked (red), and Ready for Next Stage (green).

• Cerințe: introduceți orice notă internă pentru această etapă care explică orice cerințe ale etapei.

Șterge etapa¶

If a stage is no longer needed, the stage can be deleted. To delete a stage, hover over the name of the stage, and a ⚙️ (gear) icon appears. First, click on the ⚙️ (gear) icon to reveal a drop-down menu, then click Delete. A pop-up warning appears, asking Are you sure you want to remove this column?. Click OK to delete the column.

Modele Email¶

Pentru a comunica cu solicitantul, Odoo are mai multe șabloane de e-mail preconfigurate care pot fi folosite. Șabloanele de e-mail preconfigurate și când să le utilizați sunt următoarele:

• Applicant: Acknowledgement: this template is used to let the applicant know that their application was received. This email is automatically sent out once the applicant is in the First Interview stage.

• Applicant: Interest: this template is used to let the applicant know that they have passed the Initial Qualification stage and they will be contacted to set up an interview with the recruiter.

• Applicant: Not interested anymore: this template is used when an applicant communicates that they are no longer interested in the position, and thanks them for their time and consideration.

• Applicant: Refuse: this template is used when an applicant is no longer being considered for the position.

• Applicant: Your Salary Package: this template is used when offering an applicant a position. This informs the applicant they can configure their salary package.

To manually send an email click Send message in the chatter. A text box appears, as well as the applicant’s email address. Click the ⤢ (double arrow) full composer icon in the bottom right corner of the Send Message tab in the chatter.

An email composer pop-up loads, with the Recipients and Subject pre-populated. The applicant’s email address is entered on the Recipients line, and the Subject is Re: (Subject / Application Name). The email body is empty by default.

To use a pre-configured email template, click the drop-down next to the Load template field in the lower right section of the window. Pre-configured email templates may contain dynamic placeholders so unique information can be populated in the email for a more personalized message to the applicant. There are several pre-configured email templates to choose from. Depending on the template selected, the email subject and/or body may change.

If any attachments are to be added, click the Attach A File button in the lower left corner. Navigate to the file to be attached, then click Open to attach it. To delete an attachment, click the X (Delete) icon to the right of the attachment. If any changes need to be made to the email, edit the body of the email. If the edits should be saved to be used in the future, the email can be saved as a new template. Click the Save As New Template button in the bottom right corner. To send the email, click Send and the email will be sent to the applicant. The email then appears in the chatter.

Fluxul de etapă¶

In order to move an applicant’s card from one stage to another, the applicant’s card can either be dragged and dropped in the kanban view to the desired stage, or the stage can be modified on the applicant’s card.

To change the stage on the applicant’s card, click on the applicant’s card in the kanban view to go to a detailed view of the card. The current stage for the card is highlighted in purple at the top, above the card. Simply click the desired stage for the card, and the stage changes. A log note indicating the stage change appears in the chatter. Navigate back to the kanban view by clicking on Applications in the breadcrumb menu in the top left, and the applicant’s card now appears in the new stage.

Calificarea inițială¶

All applicants appear in the Initial Qualification stage, whether submitted online or if the applicant is manually entered by a recruiter. When the applicant’s card is created, Odoo automatically populates the applicant’s Name, Email address, and Phone number on the applicant’s card. This information is required when applying for a job position.

If the applicant entered any information in the Short Introduction section of the online application, it is populated in the Application Summary tab at the bottom of the applicant’s card. If a resumé was attached to the online application, the resumé appears in the attachments section of the chatter, and is also stored in the Documents application. To find the recruitment documents stored in the Documents application, navigate to the main Documents dashboard, and click the folder labeled Recruitment on the right side. All recruitment documents will be stored within that folder.

Trimite interviu¶

În orice moment al procesului de angajare, un interviu poate fi trimis solicitantului pentru a obține mai multe informații. Aceste interviuri sunt personalizate și pot fi formatate într-o varietate de moduri.

Odoo uses the term interview, but these can be thought of as questionnaires, surveys, tests, certifications, etc. Custom interviews can be formatted to suit each individual job position’s needs. For example, a job position for a computer programmer could have an interview in the form of a programming quiz to determine the skill level of the applicant. A job position for a restaurant server could have a questionnaire inquiring about the applicant’s availability, if the desired applicant needs to be available on weekend evenings. For more information on creating and editing interview forms, refer to the Posturi de muncă documentation.

To send an interview to an applicant, click on an applicant’s card to navigate to a detailed view of the applicant’s card. At the top of the applicant’s card, click the button labeled Send Interview.

If the applicant’s card has an email address on file, a Survey pop-up window appears, with all the information populated. If an email is not on the applicant’s card, then a contact form appears. Enter the applicants email address, then click Save. The card closes and the Survey pop-up window appears.

Odoo refers to the interview forms as surveys. These email templates also use dynamic placeholders to personalize the email to the applicant and the job position. Add any additional recipients for the survey if more people should receive the email. If an email is in the database as a contact, add that contact on the Recipients line. If an email should be sent to someone who is not in the database as a contact, and they should not be added as a contact, add their email to the Additional emails line.

Dacă trebuie adăugate atașamente, faceți clic pe butonul Atașamente și va apărea o fereastră de explorare a fișierelor. Navigați la fișierul dorit, apoi faceți clic pe Open pentru a-l atașa la e-mail. Atașamentul se încarcă și este listat deasupra butonului Atașamente.

If the emailed interview must be completed by a specific date, select a date for the Answer deadline in the lower-right area of the pop-up window. Click on the line next to Answer deadline, and a calendar selector appears. Use the < (left) and > (right) arrows on either side of the month to navigate to the desired month, then click on the day to select the date.

The Mail template field is pre-populated based on the configuration for the interview. A different template can be chosen from the drop-down menu if desired. If a new template is selected, the new email template loads in the email body.

Pentru a trimite e-mailul cu linkul de interviu către solicitant, faceți clic pe Trimite în partea de jos a ferestrei pop-up de e-mail.

Refuzați¶

At any point in the recruitment pipeline, an applicant can be refused from the job application process. To refuse an applicant, click on an applicant’s card to navigate to a detailed view of the applicant’s card. At the top of the applicant’s card, there are several buttons. Click the one labeled Refuse.

A Refuse Reason pop-up appears. Select the Refuse Reason from the drop-down menu. The default refuse reasons in Odoo are: Doesn’t fit the job requirements, The applicant is not interested anymore, and The applicant gets a better offer. These three refusal reasons have pre-configured email templates associated with them. Additional refusal reasons can be created and existing ones can be modified or deleted. To add a new refusal reason, type in the name of the reason, then click Create and Edit…. A Create: Refuse Reason pop-up window appears. Type in the name of the new email template in the Email Template field, and click Create and Edit…. A Create: Email Template window loads. Configure the new email template, then click Save.

An email template populates the Email Template field after a refusal reason is selected. If an email should not be sent to the applicant, uncheck the Send Email checkbox. To view the email template, click the External Link icon to the right of the email template selected. The email template loads in the pop-up window, and can be modified if needed. After making modifications, click Save. To close the email template, click Discard.

To send the refusal email to the applicant, click Send. The refusal email is sent to the applicant, and a Refused banner appears on the applicant’s card.

After refusal, the applicant’s card is no longer visible in the job position’s kanban view. To view refused applicants, navigate to the Recruitment app ‣ Applications ‣ All Applications. All applications for all job positions are presented in a list view. To view the refused applicants only, click Filters, then click Archived/Refused. All applicants that have been archived and/or refused appear in the list. To further organize this list and view refusals by job position, click ≣ Group By, then click Job.

New applicant¶

An applicant card can be manually added if needed. If an applicant needs to be added to the list of prospective candidates and an applicant card has not been created yet (they have not applied for the job online yet) an applicant card can be easily added from the job position kanban view in one of two ways, using either the Quick add icon or the Create button.

Adăugare rapidă¶

Quickly add a new applicant using the Quick add icon. If not already in the job position kanban view, navigate to the main recruitment dashboard, and click the New Applicants button on the job position card that the applicant should be added to. Then, click on the small + (plus sign) Quick add icon in the top right of the Initial Qualification stage to quickly add a new applicant.

Introduceți următoarele informații pe card:

• Subject/Application Name: this is the only required field. Enter the title for the card. Typically this is the applicant’s name and job position being applied to, for example: Laura Smith - Experienced Developer. This field is not visible in the kanban view (unless in the Developer mode), but is visible on the individual card.

• Applicant’s Name: enter the applicant’s name.

• E-mail: introduceți adresa de email a solicitantului.

• Applied Job: the current job position populates this field. If needed, the job position can be changed by selecting a different position from the drop-down menu. If a different job position is selected, after the card is created, the card will appear in the selected job position.

After the information is entered, click Add. The applicant appears in the list, and a new blank applicant card appears. Click either the 🗑️ (delete) icon or click anywhere on the screen to close the card.

If preferred, after entering the applicant name, click Edit and a detailed Applicant Form loads. Enter the information on the form, then click Save

Creează¶

Add a new applicant including all the relevant information using the Create button. If not already in the kanban view for the job position to add an applicant to, navigate to the main recruitment dashboard, and click the New Applicants button on the job position card that the applicant should be added to. Then, click the Create button in the top left of the kanban view and an applicant form loads.

Certain fields on the applicant card may be pre-populated, depending on how the job position is configured. Typically, the Job section, as well as the Recruiter field, are all pre-populated.

Enter the following information on the new applicant form. Note that not all fields listed below may be visible. Depending on installed applications and configurations, some fields may not be displayed.

Secțiunea solicitant¶

• Subject/Application Name: this is the only required field. Enter the title for the card. Typically this is the applicant’s name and job position being applied to, for example: Laura Smith - Experienced Developer. This field is not visible in the kanban view, unless the Applicant’s Name is left blank. If there is no Applicant’s Name, then the Subject/Application Name is what is displayed on the applicant card in the kanban view.

• Applicant’s Name: enter the applicant’s name.

• E-mail: introduceți adresa de email a solicitantului.

• Telefon: introduceți numărul de telefon al solicitantului.

• Mobil: introduceți numărul de telefon mobil al solicitantului.

• Degree: select the applicant’s highest level of education earned from the drop-down menu. Options are Graduate, Bachelor Degree, Master Degree, or Doctoral Degree. The Graduate option indicates graduating the highest level of school before a Bachelor’s degree, such as a high school or secondary school diploma, depending on the country.

• Tags: select as many tags as desired from the drop-down menu. To add a tag that does not exist, type in the tag name, the click Create „new tag”.

• Interviewer: select the person who will be conducting the interview(s) from the drop-down menu. The person must have either recruiter or officer rights configured for the Recruitment application in order to appear on the drop-down.

• Recruiter: select the person responsible for the entire recruitment process for the job position. Only users can be selected, and all users are presented in the drop-down to select from.

• Appreciation: click on one of the stars to select a rating for the applicant. One star indicates Good, two stars indicates Very Good, and three stars indicates Excellent.

• Referred By User: if referral points are to be earned for this job position in the Referrals application, select the user who referred the applicant from the drop-down menu. The Referrals application must be installed for this to appear.

Secțiunea de locuri de muncă¶

The following fields are pre-populated when creating a new applicant, as long as these field are specified on the Job Position. Editing the fields is possible, if desired.

• Joc aplicat: selectați postul pentru care candidatul aplică din meniul derulant.

• Departament: selectați departamentul în care se află postul de post din meniul derulant.

• Company: select the company the job positions is for using the drop-down menu.

Secțiunea de contract¶

• Expected Salary: enter the amount the applicant is requesting for the role in this field. The number should be in a XX,XXX.XX format. The currency is determined by the localization setting for the company.

• Expected Salary - Extra advantages…: if any extra advantages are requested by the applicant, enter it in this field. This should be short and descriptive, such as 1 week extra vacation or dental plan.

• Salariu propus: introduceți suma care va fi oferită solicitantului pentru rolul din acest domeniu. Numărul trebuie să fie într-un format „XX,XXX.XX”.

• Proposed Salary - Extra advantages…: if any extra advantages are offered to the applicant, enter it in this field. This should be short and descriptive, such as 1 week extra vacation or dental plan.

• Availability: using the calendar module in the drop-down menu, select the available start date for the applicant.

Application summary tab¶

Orice detalii sau note suplimentare care ar trebui adăugate pe cardul solicitantului pot fi introduse în acest câmp.

Primul interviu¶

After an applicant has passed the Initial Qualification stage, they can be moved to the First Interview stage in the job position kanban view. To move the applicant to the next stage, drag and drop the applicant’s card to the First Interview stage, or click on the First Interview stage button at the top of the individual applicant’s card.

When the applicant’s card moves to the First Interview stage, an acknowledgement email is automatically sent to the applicant. The email is created using an email template titled Applicant: Acknowledgement. This email template is pre-configured in Odoo, and contains dynamic placeholders for the job position, the recruiter’s name, and the company’s information. Once the email is sent, the email appears in the chatter.

Programează o întâlnire¶

When a date and time have been agreed upon for both the applicant and interviewer, the interview can be scheduled. To schedule an interview, whether a phone or in-person interview, click the Meeting smart button at the top of the applicant’s record.

The applicant’s card can be found by navigating to the Recruitment application dashboard, click on a New Applications button in the job position card, then click on the applicant’s card.

Doing so loads the Calendar application, showing the currently scheduled meetings and events for the user. The meetings and events displayed are for the employees who are listed under the Attendees section on the right side of the calendar view. To change the currently loaded meetings and events being displayed, uncheck the person who’s calendar events are to be hidden. Only the checked attendees will be visible on the calendar.

The default view is the week view. To change the calendar view, click on a button to present the calendar in a different view, either Day, Month, or Year. To change the displayed date range for the calendar, either use the ⬅️ (Left), ➡️ (Right), or Today buttons above the calendar, or click on a date in the calendar on the right side of the displayed calendar.

To add a meeting to the calendar, click on the day the meeting is to take place, or click on the start time of the meeting and drag to the end time, to select the date, time, and the length of the meeting. If the calendar is displaying the day or week view, click on the day and the time slot the meeting is to take place. A New Event pop up appears, with the Meeting Subject populated with the applicant card’s Subject/Application Name. The default time slot is 30 minutes. If the information is correct, click Create to add the meeting to the calendar, or click Edit to modify the meeting.

If Edit is clicked, an expanded New Event card loads. Make any changes needed to the form.

New event card¶

The fields available to populate or modify on the detailed New Event card are as follows. The only required fields to enter are the Meeting Subject, Starting At, and Ending At fields. Once the card details are entered, click Save to save the changes and create the meeting.

• Meeting Subject: enter the subject for the meeting. This should clearly indicate the purpose of the meeting. The default subject is the Subject/Application Name on the applicant’s card.

• Participanți: selectați persoanele care ar trebui să fie prezente. Angajatul implicit listat este persoana care creează întâlnirea. Adăugați câte alte persoane doriți.

Meeting details tab¶

• Starting At: using the drop-down calendar, select the date and time for the meeting start time.

• Ending At: using the drop-down calendar, select the date and time for the meeting end time.

• Duration: this field auto populates based on the Starting At and Ending At times entered. If the meeting time is adjusted, this field automatically adjusts to the correct duration length.

• All Day: if the meeting is an all day long event, check the box next to All Day. After this box is checked, the Duration field is hidden from view, a well as the meeting start and end times.

• Organizator: angajatul care a creat întâlnirea este populat în acest câmp. Utilizați meniul derulant pentru a schimba angajatul selectat.

• Descriere: introduceți o scurtă descriere în acest câmp. Există o opțiune de a introduce text formatat, cum ar fi liste numerotate, titluri, tabele, precum și linkuri, fotografii și multe altele. Utilizați caracteristica Powerbox, tastând un / și va fi prezentată o listă de opțiuni. Derulați prin opțiuni și faceți clic pe elementul dorit. Elementul apare în câmp și poate fi modificat. Fiecare comandă prezintă o fereastră pop-up diferită. Urmați instrucțiunile pentru fiecare comandă pentru a finaliza intrarea.

• Reminders: select a reminder from the drop-down menu. Options include Notification, Email, and SMS Text Message, each with a specific time period before the event (hours, days, etc). The reminder chosen will alert the meeting participants of the meeting via the selected option.

• Locație: introduceți locația întâlnirii.

• Meeting URL: if the meeting is virtual, enter the meeting link in this field.

• Etichete: selectați orice etichetă(e) pentru întâlnire folosind meniul drop-down. Nu există limită pentru numărul de etichete care pot fi utilizate.

Fila opțiuni¶

• Recurrent: if the meeting should repeat at a selected interval (not typical for a first interview), check the box next to Recurrent. This reveals a recurrence section. Enter the details for how often the meeting should repeat, including an end time.

• Privacy: select the visibility of this meeting. Options are Public, Private, and Only internal users. Public allows for everyone to see the meeting, Private allows only the attendees listed on the meeting to see the meeting, and Only internal users allows anyone logged into the company database to see the meeting.

• Show as: select from the drop-down whether the meeting time should appear as Busy or Available in the attendees» schedules. Setting this field to Available allows other meetings to be scheduled for the same time. It is recommended to set this field to Busy, so no other meetings can be scheduled for the attendees at the same time.

Trimiteți întâlnirea participanților¶

Once changes have been entered and the meeting details are correct, the meeting can be sent to the attendees via email or text message.

To send the meeting via email, click the Email button next to the list of attendees. A Contact Attendees email configurator pop-up appears. A pre-formatted email using the default Calendar: Event Update email template populates the email body field. The followers of the document (job application), as well as the user who created the meeting are added as Recipients by default. Add the applicant’s email address to the list to send the email to the applicant as well. Make any other desired changes to the email. If an attachment is needed, click the Attach A File button, navigate to the file, then click Open. Once the email is ready to be sent, click Send.

To send the meeting via text message, click the SMS button next to the list of attendees. A Send SMS Text Message pop-up appears. At the top, in a blue box, information appears regarding the message. The first line lists how many records (phone numbers) are selected. The second line lists the number of recipients and how many of them are invalid. If a contact does not have a valid phone number listed, click Close, and edit the attendee’s record, then redo these steps.

When the message reads 0 are invalid, type in the message to be sent in the Message field. Beneath the message field, the number of characters, as well as the amount of text messages required to send the message (according to GSM7 criteria) appears. Click Put In Queue to have the text sent later, after any other messages are scheduled, or click Send Now to send the message immediately.

Al doilea interviu¶

După ce un solicitant a trecut de etapa Primul interviu, acesta poate fi mutat în etapa Al doilea interviu. Pentru a muta solicitantul la următoarea etapă, trageți și plasați cardul solicitantului în etapa Al doilea interviu sau faceți clic pe butonul pentru etapa Al doilea interviu din partea de sus a cardului solicitantului individual.

When the applicant’s card moves to the Second Interview stage, there are no automatic activities or emails configured for this stage, unlike for the First Interview stage. The recruiter can now schedule a second interview with the applicant, following the same process as for the first interview.

Propunere de contract¶

When the applicant has passed the interview stages and an offer is ready to be sent, they can be moved to the Contract Proposal stage. Drag and drop the applicant’s card to the Contract Proposal stage, or click on the Contract Proposal stage button at the top right of the individual applicant’s card.

The next step is to send an offer to the applicant. On the applicant’s card, click the Generate Offer button. A Generate a Simulation Link pop-up appears. All fields are pre-populated with information from the job position, except for the Force New Cars List, Default Vehicle, and the Canteen Cost (this is set to 0.00).

Câmpuri universale¶

Următoarele câmpuri apar pentru toate ofertele trimise solicitanților, indiferent de setările de localizare.

• Offer Template: the template currently being used to populate the Generate a Simulation Link pop-up. To modify the template, click the External link icon to the right of the drop-down arrow. Make any changes, then click Save.

• Job Title: the name of the position being offered to the applicant.

• Data de începere a contractului: data la care contractul intră în vigoare. Data implicită este data curentă. Pentru a modifica data, faceți clic pe meniul drop-down pentru a afișa un calendar. Utilizați săgețile < (stânga) și > (dreapta) de fiecare parte a lunii pentru a naviga la luna dorită, apoi faceți clic pe zi pentru a selecta data.

• Cost Anual: salariul anual oferit.

• Offer Link: this link takes the applicant to a webpage where they can enter their personal information, which will be imported to their employee record when created. If applicable, the applicant can modify their salary package (this option is not available for all localizations). Lastly, this is where the applicant accepts the offer by clicking Review Contract & Sign to accept the contract and sign it using the Sign application.

Câmpuri opționale¶

The following fields will only appear if specific localization settings are selected, and/or certain applications are installed. For example if the Fleet application is not installed, none of the optional fields related to vehicles will appear, such as Force New Cars List or Default Vehicle.

• Job Position: the official title of the job being offered to the applicant, from the Job Position card. To modify the name, click the External link icon to the right of the drop-down arrow. Make any changes, then click Save.

• Department: the department the job position falls under. To modify the department, click the External link icon to the right of the drop-down arrow. Make any changes, then click Save.

• Force New Cars List: check this box to offer a new vehicle to the applicant.

• Default Vehicle: using the drop-down menu, select the vehicle that will be assigned to the applicant.

• Canteen Cost: enter the amount that is offered to the applicant for the cafeteria.

• Contract Type: using the drop-down menu, select the type of contract that is being offered.

Trimite oferta¶

To send the offer to the applicant, click Send. If the applicant does not have an email address listed on their applicant card, the applicant form appears so their email can be configured. If there is already an email configured on the applicant’s card, the email pop-up appears instead. If prompted with the applicant’s card, enter the applicant’s email address in the Email field, then click Save. The applicant form closes and the email pop-up appears.

The Applicant: Your Salary Package email template is used, and the Recipients, Subject, and email body are pre-populated based on the email template. If any attachments need to be added, click the Attachments button and a file explorer window appears. Navigate to the desired file, then click Open to attach it to the email. The attachment loads, and is listed above the Attachments button. Once the email is ready to send, click Send.

Contract semnat¶

Odată ce solicitantul a acceptat oferta și a semnat contractul, următorul pas este mutarea solicitantului în etapa Contract Semnat. Pentru a muta solicitantul la următoarea etapă, trageți și plasați cardul solicitantului în etapa Contract Semnat sau faceți clic pe butonul Mai multe din partea de sus a cardului solicitantului pentru a dezvălui :guilabel:` butonul de etapă Contract Semnat` din partea de sus a cardului individual al solicitantului și faceți clic pe Contract Semnat.

The Contract Signed stage is folded in the kanban view, but the card may still be dragged and dropped into that stage.

Once the applicant’s card moves to the Contract Signed stage, a green Hired banner appears in the top right of the applicant’s card.

Creați un angajat¶

Once the applicant has been hired, the next step is to create an employee record of them. On the applicant’s card, click the Create Employee button in the top left. An employee form appears, and any information from the applicant’s card that can be imported into the employee card appears in the form.

Fill out the rest of the form. For detailed information on the fields, refer to the Creați un nou angajat documentation. When done, click Save. The employee record is now saved in the Employees app.