Limits of Trigonometric Functions

Trigonometry is one of the most important branch of Mathematics. We know that there are six trigonometric functions and the limit of trigonometric is the limit taken to each trigonometric function. We can easily find the limit of trigonometric functions and the limit of the trigonometric function may or may not exist depending upon the given function with the point of consideration.

Limits of Trigonometric Functions

For trigonometric functions, we can easily take the limit of all six trigonometric functions by replacing the function variable with the limit value. The limit of trigonometric function depends on the domain, and range of the function. In this article, we will learn about the limit of all six trigonometric function, their examples and others in detail.

Limits of Trigonometric Functions

The finite limit of trigonometric functions, i.e. the limit of the trigonometric function for the finite value of the x is discussed in the table below:

As seen from the table above it is evident that the finite limit of the trigonometric function results in a finite value except for some exceptions. We know that for sin x, and cos x their range is between -1 and 1 and so for the infinite limit their value oscillates between -1 and 1 finding their exact value is not possible and thus their lint at infinity is undefined. For x reaching positive or negative infinity, the limit of the trigonometric functions is discussed below.

Function Limit of the function for ±∞

The infinite limit of the trigonometric function is discussed in the table below,

Theorems of Limits of Trigonometric Functions

We have two theorems that are used in defining the limit of the trigonometric functions that are,

Theorem 1

For any two real-valued functions f(x) and g(x) which are defined in the same domain and the relation between them is f(x) ≤ g(x). We can take the limit of these functions at x approaching a then,

lim_x⇢af(x) = f(a) and, lim_x⇢ag(x) = g(a)

If both limits exist then we can easily state that,

lim_x⇢af(x) ≤ lim_x⇢ag(x)

Theorem 2 (Sandwich Theorem)

The theorem is used to calculate the limit of those functions whose limit cannot be calculated easily like (sin x/x at x = 0). The function g(x) is squeezed or sandwiched between two functions h(x) and g(x) in such a way that 

f(x) ≤ g(x) ≤ h(x)

The graph of the above condition is shown below which represents the sandwich theorem limit.

We can say h(x) is the upper limit of g(x) and f(x) is its lower limit at point a as can be observed in the graph above:

lim_x→a h(x) = L and lim_x→a f(x) = L

Where,

• a is the point at which the limit is calculated, and 
• L is the value of the limit.

Then,

lim_x→a g(x) = L

Example: Given: g(x) = x²sin(1/x), Find: lim_x→0 g(x)

Solution: 

We know,

-1≤ sin(1/x) ≤ 1 Under its domain       

Multiplying with x²

-x² ≤ x2sin(1/x) ≤ x²

Then let f(x) = -x² and h(x) = x²

f(x) ≤ g(x) ≤ h(x)  

Using sandwich theorem,

As lim_x→a h(x) = lim_x→a f(x) = L

Therefore,

lim_x→a g(x) = L

⇒ lim_x→0 f(x) = lim_x→0 -x² = 0 and  

⇒ lim_x→0 h(x) = lim_x→0 x² = 0

Thus, lim_x→0 g(x) = 0

Limits of Various Trigonometric Functions

As we know that we have six trigonometric functions, i.e.,

• Sine 
• Cosine 
• Tangent 
• Secant 
• Cosecant
• Cotangent

The limit of each function is discussed in detail in the article below.

Limit of Sine Function

The function f(x) = sin(x) is a continuous function over its entire domain, with its domain consisting of all the real numbers. The range of this function is [-1, 1] as can be seen in the graph added below

So, if the limit of the sine function is calculated at any given real number it’s always defined and lies between [-1, 1].

Let, f(x) = sin(x)

lim_x→a f(x) = lim_x→a sin(x)

⇒ lim_x→a f(x) = sin(a),                    (where a is a real number)

Example: Find lim_x→π/2 sin(x)

Solution: 

As we know sin(x) is defined at π/2

Therefore,

lim_x→π/2 sin(x) = sin(π/2) = 1

Limit of Cosine Function

The function f(x) = cos(x) is a continuous function over its entire domain, with its domain consisting of all the real numbers.

The range of this function is [-1, 1] as can be seen in the graph added below.

So, if the limit of the cosine function is calculated at any given real number it’s always defined and lies between [-1, 1].

Let g(x) = cos(x)

lim_x→a g(x) = lim_x→a cos(x)

⇒ lim_x→a g(x) = cos(a), where a is a real number

Example: Find lim_x→π/2 cos(x)

Solution:   

As we know cos(x) is continuous and defined at π/2

Therefore,

lim_x→π/2 cos(x) = cos(π/2) = 0

Limit of Tangent Function

The function f(x) = tan(x) is defined at all real numbers except the values where cos(x) is equal to 0, that is, the values π/2 + πn for all integers n. Thus, its domain is all real numbers except π/2 + πn, n € Z.

The range of this function is (-∞, +c) as can be seen in the graph added below.

So, if the limit of the tangent function is calculated in its domain it is always defined and lies between(-∞, +∞).

f(x) = tan(x)

lim_x→a f(x) = lim_x→a  tan(x)

⇒ lim_x→a f(x) = tan(a)                 (where a belongs to real no. except π/2 + πn, n € Z)

Example: Find lim_x→π/2tan(x)

Solution:   

As we can see in graph tan(x) is tending to +∞ as x→-π/2 and to -∞ as x→+π/2

So, the right-hand and left-hand limits of this function at π/2 are not same

Therefore,

lim_x→π/2 tan(x) = Not defined

Limit of Cosec Function

The function f(x) = cosec(x) is defined at all real numbers except the values where sin(x) is equal to 0, that is, the values πn for all integers n. Thus, its domain is all real numbers except πn, n € Z.

The range of this function is (-∞,-1] U [1,+∞) as can be seen in the graph added below.

So, if the limit of the cosine function is calculated in its domain it is always defined and lies between its range.

Let f(x) = cosec(x)

lim_x→a f(x) = lim_x→a cosec(x)

⇒ lim_x→a f(x) = cosec(a)        (where a∈ R – nπ: n € Z)

Example: Find lim_x→π cosec(x)

Solution:  

As we know sin(x) is 0 as x→π           

So, 1/sin(x) i.e. cosec(x) at π cannot be defined

Therefore,

lim_x→π cosec(x) = Not defined

Limit of Secant Function

The function f(x) = sec(x) is defined at all real numbers except the values where cos(x) is equal to 0, that is, the values π/2 + πn for all integers n. Thus, its domain is all real numbers except π/2 + πn, n € Z.

The range of this function is (-∞, -1] U [1, +∞) as can be seen in the graph added below.

So, if the limit of the sec function is calculated in its domain it is always defined and lies between its range.

Let f(x) = sec(x)

lim_x→a f(x) = lim_x→a sec(x)

⇒ lim_x→a f(x) = sec(a)          (where a∈ R – {nπ + π/2}: n € Z)

Example: Find lim_x→π/2 sec(x)

Solution: 

As we know cos(x) is 0 as x→π/2

So, 1/cos(x) i.e. sec(x) at π/2 cannot be defined

Therefore,

lim_x→π/2 sec(x) = Not defined

Limit of Cot Function

The function f(x) = cot(x) is defined at all real numbers except the values where tan(x) is equal to 0, that is, the values πn for all integers n. Thus, its domain is all real numbers except πn, n € Z.

The range of this function is (-∞, +∞) as can be seen in the graph added below.

So, if the limit of the cot function is calculated in its domain it is always defined and lies between its range.

Let f(x) = cot(x)

lim_x→a f(x) = lim_x→a cot(x)

⇒ lim_x→a f(x) = cot(a)               (where a∈ R – nπ: n € Z)

Example: Find lim_x→π cot(x)

Solution: 

As we know tan(x) is 0   as x→π

So, 1/tan(x) i.e. cot(x) at π cannot be defined

Therefore,

limx→π cot(x) = Not defined

Graph of Various Trigonometric Functions

The graph of various trigonometric functions is added in the following image:

Read More

• Trigonometric Table
• Trigonometric Identities
• Inverse Trigonometric Functions

Solved Examples on Limits of Trigonometric Functions

Example 1: Given: g(x) = cos(x)/x, Find: lim_x→∞ g(x)

Solution: 

We know,

-1≤ cos(x)≤ 1 under its domain    

Dividing by x,

-1/x ≤ cos(x)/x ≤ 1/x

Then let f(x) = -1/x and h(x) = 1/x          

f(x) ≤ g(x) ≤ h(x)              

Using sandwich theorem,

As lim_x→a h(x) = lim_x→a f(x) = L

Therefore, 

lim_x→a g(x) = L

⇒ lim_x→∞ f(x) = lim_x→∞ -1/x = 0 and  

⇒ lim_x→∞ h(x) = lim_x→∞ 1/x = 0

Therefore, 

lim_x→∞ g(x) = 0 

Example 2: Find lim_x→π/2 cot(x)

Solution:

As we know cot(x) is continuous and defined at π/2

Therefore,   

lim_x→π/2 cot(x) = cot(π/2) = 0  

Example 3: Find lim_x→π sec(x)

Solution:   

As we know tan(x) is continuous and defined at π

Therefore,

lim_x→π cosec(x) = sec(π) = -1  

Example 4: Find lim_x→π/2 cosec(x)

Solution:   

As we know tan(x) is continuous and defined at π/2

Therefore,   

lim_x→π/2 cosec(x) = cosec(π/2) = 1  

Example 5: Find lim_x→πtan(x)

Solution:   

As we know tan(x) is continuous and defined at π

Therefore,  

lim_x→π tan(x) = tan(π) = 0   

Example 6: Find lim_x→π cos(x)

Solution:   

As we know cos(x) is continuous and defined at π

Therefore,  

lim_x→π cos(x) = cos(π) = -1 

Example 7: Find lim_x→πsin(x)

Solution:

As we know sin(x) is defined at π

Therefore,   

lim_x→π sin(x) = sin(π) = 0 

Limits of Trigonometric Functions – FAQs

What are trigonometric functions?

Trigonometric functions are the function that represents the relationship between the angles of the triangle with the sides of the triangle. They are also called circular functions as they repeat their value after some time in a circular manner.

What are six basic fundamental trigonometric functions?

The six basic trigonometric functions are,

• Sine Function
• Cosine Function
• Tangent Function
• Secant Function
• Cosecant Function
• Cotangent Function

Is the limit of the trigonometric function exist at infinity?

As we know that trigonometric functions are cyclic functions and generally their values oscillate between two values. So their values at infinity do not exist.

What is the limit of sin(x) as x approaches infinity?

The limit of sin(x) as x approaches infinity does not exist as the value of sin(x) oscillates between -1 and 1 without approaching a specific value.

What is the limit of cos(x) as x approaches infinity?

Similar to sin(x), the limit of cos(x) as x approaches infinity also does not exist as the value of sin(x) oscillates between -1 and 1 without approaching a specific value.

shubhigupta22

Follow

Improve