Pvc candles

I know, another candle DIY. I’ll tell you though, flickering candles make such a huge impact with a Halloween setup, especially when you have plenty of them. Even more so, if you have differe…

Outdoor PVC Candles w/flickering lights

Here is a tutorial on how to make your own pvc candles. Your going to need some: pvc pipe any diameter, cardboard or foam core, spray paint & acrylic paint, twine or embroidery floss and a lot of gluesticks. Firstly, I cut the pvc pipe using a hack saw into various lengths keeping in mind that if you were to light them all at the same time they would be about the same height when blown out.... so cut them about 1/4 to 1 inch in different various heights. 2.) I then cut circles to fit each…

Ok, this project yields some high quality horror candles, but it is not really cheap to make. This is time consuming, and a bit of creative process is

Halloween Discussion Forum, Haunts and Home Haunt Community.

Pvc candles painted

Kendra Davis on Instagram: "❤️‍🔥 DIY modern candle holders❤️‍🔥 Hey-hey L❤️VES! Here is an easy and inexpensive DIY/craft. ✨To make these floor candle holders, I used a 4” width piece of PVC pipe from Home Depot. The base is a glass plate from the Dollar Tree. I used liquid nail to attach the PVC to the glass plate. I decided to spray paint mine black, but I want to make another set just a bit taller and use tan stone spray paint. I was lucky enough to find a glass candle holder…