Art Club Juried Show
 |
| Escapism Juried Show |
Last week the
YVC Art Club installed their juried show,
Escapism, in the hallway gallery of Palmer Martin Hall. The show runs through April 23 and is open whenever the building is open.
 |
| Escapism 3D work, featuring lamp by Les Delzer, bust by Emily George, dinner set by Sara Lawrence, fox by Chelsea Blodgett |
The show features work by high school and college students in and around Yakima. Some of the work was completed during classes and some was done on the students' own time. This show is not the same as the annual Department of Visual Arts Student Exhibition at
Larson Gallery in May.
 |
| Escapism Juried Show, 2d work on display |
This show was organized by Art Club students. This was the first year and we had over 50 entires including painting, drawing, photography, and ceramics.
 |
| fox and bunny by Chelsea Blodgett |
The four ceramic items in the show are all made by students in my clay classes this quarter, though only two were actually made this quarter. The fox, by Chelsea Blodgett, was build for
the second project in
my flipped hand-building class and was taken out of the kiln within an hour or two of when it was put into the display case for this show.
 |
| Frog vase and dinner set by Sara Lawrence |
One of my intermediate wheel students, Sara Lawrence, created this frog themed dinner set during the winter quarter, too. Her frog vase and dishes feature a glaze recipe she tested this quarter during class. Her work was out of the kiln at least a day before the show was installed.
Last Firings of the Winter Quarter
 |
| Reduction fired work in the gas kiln (before unloading) |
Today is Sunday, but I went in to unload and load kilns both today and yesterday. My students were told that the last day to glaze cone 10 reduction work in the gas kiln was Thursday by 3pm and the last day to glaze cone 10 or cone 04 work in the electric kilns was Friday 3pm. I also warned students that I would be loading the kilns during the day on Thursday and Friday and once they were full, they were full.
 |
| Batman, by Humberto Urrutia-Jr (before unloading) |
My students and I finished loading the gas kiln on Thursday about 3:10. There were a handful of pieces that wouldn't fit in the kiln at that point, based on how and what we had to load. Moments later, an intermediate student walked in with her 10" tall piece ready to load. She was unhappy when I told her she could load it in the "oxidation" firing in the electric kiln.
 |
| Sculpture with copper red glaze in reduction by Jordan Miller |
Some of our glazes look different when fired in a reduction atmosphere vs the neutral atmosphere of an electric kiln. Copper Red and Shino glazes are particularly impacted. Reds in reduction will look green and transparent in the electric kiln.
 |
| 3D printed turtle pencil holder by Chelsea Blodgett |
An extra firing in the electric kiln is relatively easy to add, because the kiln is smaller and the kiln can be programmed to fire to temperature. The gas kiln is larger and requires hourly adjustments to the gas, air, and damper during much of the firing process. I did not offer to unload that kiln on Saturday and reload it with one piece in it to fire all day on Sunday.
 |
| Lady with flowers by Autumn Nugent (picture taken from inside the kiln before unloading) |
I did, however, end up loading and unloading more than expect on the weekend. Next week is finals week Wednesday through Friday, but I am presenting at NCECA in Pittsburg on Wednesday and Thursday, so I will not be here for finals week. The upshot is that I have adjusted our finals due dates and, by extension, our firing schedule.
 |
| 3D Printed vase in high temp oxidation firing by Humberto Urrutia-Jr |
At the start of the week I had anticipated firing one of each type of kiln (cone 10 reduction, cone 10 "oxidation", and low fire), but by midweek it was clear we had more work than that, so I loaded an extra cone 10 firing in the smaller electric kiln.
 |
| cone 10 oxidation fired vase by Humberto Urrutia-Jr |
This small electric kiln was too hot to unload on Friday when we were loading the second cone 10 in our larger electric kiln. I knew that I would be coming in to unload it and reload it with low fire work on Saturday, but the kiln was small and the load/unload would be relatively quick.
 |
| oxidation fired crab (before unloading) by Cigdem Collins |
I had just finished loading and had started the second cone 10 in the electric kiln on Friday morning, when a student came to me with a problem. For context, most students had finished glazing already and I only had about 5 students finishing work during class that morning. I had already checked in with every single student about what they were glazing. They all assured me their cone 10 work was done and they were glazing only low fire work.
 |
| Coil build low fire vase by Margarita Cruz |
The student who came to me with the problem had spent a couple of days very carefully applying underglaze to her sculpture. She had already assured me, twice, that the 24" tall sculpture would be going in the low temperature firing. I just had to figure out how to fit it and some of its larger friends.
 |
| low fire stuffed elephant sculpture by Margarita Cruz |
The high temp kiln was at a little over 200 degrees when this student came out of the glaze room and explained to me that she had glazed her work with the high temperature clear, instead of the low temperature clear over the underglaze. She couldn't wash off the glaze because it would wash off the underglaze she had spent so much time on. She couldn't fire the work to a low temperature because the glaze wouldn't melt and become clear. I happen to know, from other students being confusing about firing temperatures, that this high temperature clear glaze looks rough and white when fired at low temperature.
 |
| student coil vase, low fired |
So, of course, I ended up coming in on Saturday to unload the small high fire kiln and load and fire the low fire work. The large low temp kiln I had loaded on Friday was too hot to unload. I came in Sunday morning to unload the low temperature work (both kilns were cool, but the smaller kiln was easier to unload alone) and load one last high fire with just this tall piece and one small friend who had appeared Friday afternoon.
 |
| too much glaze on a thrown piece in the large high fire electric kiln |
Raku Firing
 |
| 3D printed vase (which didn't survive the firing well) with horse-hair decoration |
Last week we also ran two class
raku firing days. On Tuesday, students in wheel classes were able to fire their work, but somehow I didn't get any pictures of it. On Wednesday hand-builders fired. The students really seem to enjoy using horse hair on their work.
 |
| Horse-hair 3D printed and hand-built bunny by Nadene Orlando-Urlacher |
A few students also took advantage of the raku glazes and one that was particularly nice was a vase by Chelsea Blodgett. She used wax resist for the black areas and white crackle glaze for the rest. Her coil-built vase was modeled on Ancient Greek vases, I believe.
 |
| Vase and cat mug by Chelsea Blodgett |