1.
|
Design Concept and Parameters of a 15 T Nb$_{3}$Sn Dipole Demonstrator for a 100 TEV Hadron Collider
/ Zlobin, A V (Fermilab) ; Andreev, N (Fermilab) ; Barzi, E (Fermilab) ; Kashikhin, V V (Fermilab) ; Novitski, I (Fermilab)
FNAL has started the development of a 15 T Nb$_{3}$Sn dipole demonstrator for a 100 TeV scale hadron collider. This paper describes the design concept and parameters of the 15 TNb$_{3}$Sn dipole demonstrator. [...]
FERMILAB-CONF-15-179-TD.-
2015 - 3 p.
- Published in : 10.18429/JACoW-IPAC2015-WEPTY041
Fulltext: PDF; External link: Full-text at JACoW Server
In : 6th International Particle Accelerator Conference, Richmond, VA, USA, 3 - 8 May 2015, pp.WEPTY041
|
|
2.
|
Quench Performance of the First Twin-aperture 11 T Dipole for LHC upgrades
/ Zlobin, A V (Fermilab) ; Andreev, N (Fermilab) ; Apollinari, G (Fermilab) ; Barzi, E (Fermilab) ; Chlachidze, G (Fermilab) ; Nobrega, A (Fermilab) ; Novitski, I (Fermilab) ; Stoynev, S ; Turrioni, D (Fermilab) ; Auchmann, B (CERN) et al.
FNAL and CERN are developing a twin-aperture 11 T Nb$_{3}$Sn dipole suitable for installation in the LHC. A single-aperture 2-m long dipole demonstrator and two 1-m long dipole models have been fabricated and tested at FNAL in 2012-2014. [...]
FERMILAB-CONF-15-178-TD.-
2015 - 4 p.
- Published in : (2015) , pp. WEPTY040
Fulltext: PDF; External links: FERMILABCONF; JACOW
In : 6th International Particle Accelerator Conference, Richmond, VA, USA, 3 - 8 May 2015, pp.WEPTY040
|
|
3.
|
Testing of a Single 11 T $Nb_3Sn$ Dipole Coil Using a Dipole Mirror Structure
/ Zlobin, Alexander (Fermilab) ; Andreev, Nicolai (Fermilab) ; Barzi, Emanuela (Fermilab) ; Chlachidze, Guram (Fermilab) ; Kashikhin, Vadim (Fermilab) ; Nobrega, Alfred (Fermilab) ; Novitski, Igor (Fermilab) ; Turrioni, Daniele (Fermilab) ; Karppinen, Mikko (CERN) ; Smekens, David (CERN)
FNAL and CERN are developing an 11 T Nb$_{3}$Sn dipole suitable for installation in the LHC. To optimize coil design parameters and fabrication process and study coil performance, a series of 1 m long dipole coils is being fabricated. [...]
FERMILAB-CONF-14-189-TD.-
2014 - 3 p.
- Published in : , pp. WEPRI099
Fulltext: PDF; External links: Published version from JACoW; FERMILABCONF; Fulltext
In : 5th International Particle Accelerator Conference, Dresden, Germany, 15 - 20 Jun 2014, pp.WEPRI099
|
|
4.
|
Test Results of LARP ${\rm Nb}_{3}{\rm Sn}$ Quadrupole Magnets Using a Shell-Based Support Structure (TQS)
/ Caspi, S (LBNL, Berkeley) ; Dietderich, D R (LBNL, Berkeley) ; Felice, H (LBNL, Berkeley) ; Ferracin, P (LBNL, Berkeley) ; Hafalia, R (LBNL, Berkeley) ; Hannaford, C R (LBNL, Berkeley) ; Lietzke, A F (LBNL, Berkeley) ; Lizarazo, J (LBNL, Berkeley) ; Sabbi, G -L (LBNL, Berkeley) ; Wang, X R (LBNL, Berkeley) et al.
Amongst the magnet development program of a large-aperture Nb$_{3}$Sn superconducting quadrupole for the Large Hadron Collider luminosity upgrade, six quadrupole magnets were built and tested using a shell based key and bladder technology (TQS). The 1 m long 90 mm aperture magnets are part of the US LHC Accelerator Research Program (LARP) aimed at demonstrating Nb$_{3}$Sn technology by the year 2009, of a 3.6 m long magnet capable of achieving 200 T/m. [...]
2009 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 19 (2009) 1221-1225
In : Applied Superconductivity Conference 2008, Chicago, IL, USA, 17 - 22 Aug 2008, pp.1221-1225
|
|
5.
|
Heat Treatment Optimization of Rutherford Cables for a 15-T Nb$_3$Sn Dipole Demonstrator
/ Barzi, Emanuela (Fermilab) ; Bossert, Marianne (Fermilab) ; Field, Michael (Fermilab) ; Li, Pei (Fermilab) ; Miao, Hanping (Fermilab) ; Parrell, Jeff (Fermilab) ; Turrioni, Daniele (Fermilab) ; Zlobin, Alexander V (Fermilab)
/HighFled Magnets Collaboration
Fermi National Accelerator Laboratory has been developing a 15-T Nb$_3$Sn dipole demonstrator for a future very high energy pp collider based on an optimized 60-mm aperture four-layer “cos-theta” coil. To increase the magnet efficiency, the coil was graded by using two cables with same 15 mm width and different thicknesses made of two different restacked rod process (RRP) wires. [...]
FERMILAB-CONF-16-607-TD.-
2017 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4802905
Fulltext: PDF;
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4802905
|
|
6.
|
Reference Design of the Mu2e Detector Solenoid
/ Feher, S (Fermilab) ; Andreev, N (Fermilab) ; Brandt,, J (Fermilab) ; Cheban, S (Fermilab) ; Coleman, R (Fermilab) ; Dhanaraj, N (Fermilab) ; Fang, I (Fermilab) ; Lamm, M (Fermilab) ; Lombardo, V (Fermilab) ; Lopes, M (Fermilab) et al.
/Mu2e
The Mu2e experiment at Fermilab has been approved by the Department of Energy to proceed developing the preliminary design. Integral to the success of Mu2e is the superconducting solenoid system. [...]
FERMILAB-PUB-13-399-TD.-
2014 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 24 (2014) 4500304
Fulltext: PDF; External link: OSTI
In : 23rd International Conference on Magnet Technology, Boston, MA, USA, 14 - 19 Jul 2013, pp.4500304
|
|
7.
|
The 11 T Dipole for HL-LHC: Status and Plan
/ Savary, F (CERN) ; Barzi, E (Fermilab) ; Bordini, B (CERN) ; Bottura, L (CERN) ; Chlachidze, G (Fermilab) ; Ramos, D (CERN) ; Izquierdo Bermudez, S (CERN) ; Karppinen, M (CERN) ; Lackner, F (CERN) ; Loffler, C H (CERN) et al.
The upgrade of the Large Hadron Collider (LHC) collimation system includes additional collimators in the LHC lattice. The longitudinal space for these collimators will be created by replacing some of the LHC main dipoles with shorter but stronger dipoles compatible with the LHC lattice and main systems. [...]
FERMILAB-CONF-16-358-TD.-
2016 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4005305
Fulltext: PDF; External link: FERMILABCONF
In : 24th International Conference on Magnet Technology, Seoul, Korea, 18 - 23 Oct 2015, pp.4005305
|
|
8.
|
Field Quality Measurements in the FNAL Twin-Aperture 11 T Dipole for LHC Upgrades
/ Strauss, T (Fermilab) ; Apollinari, G (Fermilab) ; Barzi, E (Fermilab) ; Chlachidze, G (Fermilab) ; Di Marco, J (Fermilab) ; Nobrega, F (Fermilab) ; Novitski, I (Fermilab) ; Stoynev, S (Fermilab) ; Turrioni, D (Fermilab) ; Velev, G (Fermilab) et al.
FNAL and CERN are developing an 11 T Nb$_{3}$Sn dipole suitable for installation in the LHC to provide room for additional collimators. Two 1 m long collared coils previously tested at FNAL in single-aperture dipole configuration were assembled into the twin-aperture configuration and tested including magnet quench performance and field quality. [...]
FERMILAB-CONF-16-520-TD; NAPAC-2016-MOPOB41.-
2017 - 4 p.
- Published in : 10.18429/JACoW-NAPAC2016-MOPOB41
Fulltext: PDF; External links: FERMILABCONF; JACoW
In : 2016 North American Particle Accelerator Conference, Chicago, IL, USA, 9 - 14 Oct 2016, pp.MOPOB41
|
|
9.
|
|
10.
|
Dipole Field Quality and Dynamic Aperture for FCC-hh
/ Dalena, Barbara (IRFU, Saclay) ; Boutin, David (IRFU, Saclay) ; Chancé, Antoine (IRFU, Saclay) ; Holzer, Bernhard (CERN) ; Izquierdo Bermudez, Susana (CERN) ; Schoerling, Daniel (CERN) ; Schulte, Daniel (CERN)
The Nb₃Sn dipole design for the hadron machine option of the Future Circular Colliders enters in an intense and long R&D; phase. As a result, more realistic dipole field quality evaluations are available for beam dynamics studies. [...]
CERN-ACC-2018-084.-
2018 - 4 p.
- Published in : 10.18429/JACoW-IPAC2018-MOPMF024
Fulltext: PDF;
In : 9th International Particle Accelerator Conference, Vancouver, Canada, 29 Apr - 4 May 2018, pp.MOPMF024
|
|