1.
|
An RPC-based Technical Trigger for the CMS Experiment
/ CMS Collaboration
In the CMS experiment, sub-detectors may send special trigger signals, called "Technical Triggers", for special purposes like test and calibration. The Resistive Plate Chambers are part of the Muon Trigger System of the experiment, but might also produce a cosmic muon trigger as Technical Trigger to be used during the commissioning to the detectors, the CMS magnet Test Cosmic Challenge and the later running of CMS. [...]
CMS-CR-2006-088.-
Geneva : CERN, 2007 - 8 p.
Fulltext: PDF; Published version from CERN: PDF;
In : 12th Workshop on Electronics For LHC and Future Experiments, Valencia, Spain, 25 - 29 Sep 2006, pp.284-288 (CERN-2007-001)
|
|
2.
|
Resistive plate chamber commissioning and performance in CMS
/ Roselli, G (Bari U. ; INFN, Bari) ; Abbrescia, M (Bari U. ; INFN, Bari) ; Iaselli, G (Bari U. ; INFN, Bari) ; Marangelli, B (Bari U. ; INFN, Bari) ; Natalin, S (Bari U. ; INFN, Bari) ; Nuzzo, S (Bari U. ; INFN, Bari) ; Pugliese, G (Bari U. ; INFN, Bari) ; Romano, F (Bari U. ; INFN, Bari) ; Trentadue, R (Bari U. ; INFN, Bari) ; Tupputi, S (Bari U. ; INFN, Bari) et al.
The CMS muon system is conceived for trigger and muon track reconstruction. The redundancy and robustness of the system are guaranteed by three complementary subsystems: drift tube in the barrel, cathode strip chamber in the end-cap and resistive plate chamber in barrel and end-cap. [...]
2009
- Published in : Nucl. Instrum. Methods Phys. Res., A 602 (2009) 696-699
|
|
3.
|
|
4.
|
First Measurements of the Performance of the Barrel RPC System in CMS
/ Colaleo, A (INFN, Bari) ; Loddo, F (INFN, Bari) ; Maggi, M (INFN, Bari) ; Ranieri, A (INFN, Bari) ; Abbrescia, M (INFN, Bari) ; Iaselli, G (INFN, Bari) ; Marangelli, B (INFN, Bari) ; Natali, S (INFN, Bari) ; Nuzzo, S (INFN, Bari) ; Pugliese, G (INFN, Bari) et al.
During the summer 2006, a first integrated test of a part of the CMS experiment was performed at CERN collecting a data sample of several millions of cosmic rays events. A fraction of the Resistive Plate Chambers system was successfully operated. [...]
CMS-NOTE-2008-027; CERN-CMS-NOTE-2008-027.-
Geneva : CERN, 2009 - 16 p.
- Published in : Nucl. Instrum. Methods Phys. Res., A 609 (2009) 114-121
Fulltext: PDF;
|
|
5.
|
A configurable tracking algorithm to detect cosmic muon tracks for the CMS-RPC based technical trigger
/ Rajan, R T (INFN, Bari ; Bari U.) ; Colaleo, A (INFN, Bari) ; Loddo, F (INFN, Bari) ; Maggi, M (INFN, Bari) ; Ranieri, A (INFN, Bari) ; Abbrescia, M (INFN, Bari ; Bari U.) ; Guida, R (CERN) ; Iaselli, G (INFN, Bari ; Bari U.) ; Nuzzo, S (INFN, Bari ; Bari U.) ; Pugliese, G (INFN, Bari ; Bari U.) et al.
In the CERN CMS experiment at LHC Collider special trigger signals called Technical Triggers will be used for the purpose of test and calibration. The Resistive Plate Chambers (RPC) based Technical Trigger system is a part of the CMS muon trigger system and is designed to detect cosmic muon tracks. [...]
2009
- Published in : Nucl. Instrum. Methods Phys. Res., A 602 (2009) 792-795
|
|
6.
|
The compact muon solenoid RPC barrel detector
/ Colaleo, A (INFN, Bari) ; Loddo, F (INFN, Bari) ; Maggi, M (INFN, Bari) ; Ranieri, A (INFN, Bari) ; Abbrescia, M (INFN, Bari ; Bari U.) ; Guida, R (CERN) ; Iaselli, G (INFN, Bari ; Bari U.) ; Marangelli, B (INFN, Bari ; Bari U.) ; Natali, S (INFN, Bari ; Bari U.) ; Nuzzo, S (INFN, Bari ; Bari U.) et al.
Resistive Plate Chambers (RPC) have been chosen as dedicated trigger muon detectors for the Compact Muon Solenoid [CMS collaboration, Technical Design Report, CERN/LHCC 94-38, 1994. [1]] experiment at the Large Hadron Collider [The LHC project at CERN, LHC-project-report-36, 1996. [...]
2009
- Published in : Nucl. Instrum. Methods Phys. Res., A 602 (2009) 674-678
|
|
7.
|
|
8.
|
Resistive plate chambers for 2013-2014 muon upgrade in CMS at LHC
/ Colafranceschi, S (CERN) ; Chudasama, R (Bhabha Atomic Res. Ctr.) ; Pant, L M (Bhabha Atomic Res. Ctr.) ; Mohanty, A K (Bhabha Atomic Res. Ctr.) ; Sehgal, R (Bhabha Atomic Res. Ctr.) ; Sehgal, S T (Bhabha Atomic Res. Ctr.) ; Thomas, R G (Bhabha Atomic Res. Ctr.) ; Sharma, A (CERN) ; Bhandari, V (Panjab U.) ; Chand, S (Panjab U.) et al.
During 2013 and 2014 (Long Shutdown LS1) the CMS experiment is upgrading the forward region installing a fourth layer of RPC detectors in order to complete and improve the muon system performances in the view of the foreseen high luminosity run of LHC. The new two endcap disks consists of 144 double-gap RPC chambers assembled at three different production sites: CERN, Ghent (Belgium) and BARC (India). [...]
2014 - 9 p.
- Published in : JINST 9 (2014) C10033
In : 12th workshop on Resistive Plate Chambers and Related Detectors, Beijing, China, 23 - 28 Feb 2014, pp.C10033
|
|
9.
|
CMS RPC commissioning of the existing detector during the long shutdown
/ Cimmino, A (Gent U.) ; Ban, Y (Peking U.) ; Cai, J (Peking U.) ; Li, Q (Peking U.) ; Liu, S (Peking U.) ; Qian, S (Peking U.) ; Wang, D (Peking U.) ; Xu, Z (Peking U.) ; Zhang, F (Peking U.) ; Choi, Y (Sungkyunkwan U.) et al.
/CMS
February 1 (th) 2013 marked the end of the first period of running of the Large Hadron Collider (LHC) and the start of a two-year break from operation (LS1) aimed at consolidating both the accelerator as well as the detectors. By the end of LS1, the LHC is expected to provide collisions at 13 Tev. [...]
2014 - 8 p.
- Published in : JINST 9 (2014) C10043
In : 12th workshop on Resistive Plate Chambers and Related Detectors, Beijing, China, 23 - 28 Feb 2014, pp.C10043
|
|
10.
|
|