|
1.
|
|
|
2.
|
ebook
|
|
3.
|
The EuroCirCol 16T Cosine–Theta Dipole Option for the FCC
/ Sorbi, Massimo (INFN, Milan ; Milan U.) ; Bellomo, Giovanni (INFN, Milan ; Milan U.) ; Caiffi, Barbara (INFN, Genoa) ; Fabbricatore, Pasquale (INFN, Genoa) ; Farinon, Stefania (INFN, Genoa) ; Marinozzi, Vittorio (INFN, Milan ; Milan U.) ; Volpini, Giovanni (INFN, Milan ; Milan U.)
EuroCirCol is a conceptual design study for a post-LHC research infrastructure based on an energy-frontier of the 100-TeV circular hadron collider “Future Circular Collider.” In the frame of the high-field accelerator magnet design work package of this study, three different options for dipole magnets providing a field of 16 T in a 50-mm aperture are being considered: block-coils, common-coils, and cosine-theta. All options are being explored and will be compared based on the same assumptions, in particular for what regards the conductor performance, operating temperature, and margin. [...]
2016 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2016) 4001205
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4001205
|
|
|
4.
|
First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project
/ Kirby, Glyn A (CERN) ; van Nugteren, Jeroen (CERN) ; Bajas, H (CERN) ; Benda, V (CERN) ; Ballarino, A (CERN) ; Bajko, M (CERN) ; Bottura, Luca (CERN) ; Broekens, K (CERN) ; Canale, M (CERN) ; Chiuchiolo, A (CERN) et al.
EuCARD-2 is a project partly supported by FP7-European Commission aiming at exploring accelerator magnet technology for 20 T dipole operating field. The EuCARD-2 collaboration is liaising with similar programs for high field magnets in the USA and Japan. [...]
2017 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4003307
Fulltext: PDF;
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4003307
|
|
|
5.
|
Construction and Cold Test of the First Superferric Corrector Magnet for the LHC Luminosity Upgrade
/ Statera, Marco (LASA, Segrate) ; Volpini, Giovanni (LASA, Segrate) ; Alessandria, Franco (LASA, Segrate) ; Bellomo, Giovanni (LASA, Segrate) ; Broggi, Francesco (LASA, Segrate) ; Paccalini, Antonio (LASA, Segrate) ; Pedrini, Danilo (LASA, Segrate) ; Leone, Augusto (LASA, Segrate) ; Marinozzi, Vittorio (LASA, Segrate) ; Quadrio, Mauro (LASA, Segrate) et al.
INFN is developing at LASA lab (INFN Milano, Italy) the prototypes of five corrector magnets, from skew quadrupole to dodecapole, which will equip the high-luminosity interaction regions of the High Luminosity-LHC. These magnets are based on a superferric design, which allows a relatively simple, modular, and easy to construct magnet. [...]
2017 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4003205
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4003205
|
|
|
6.
|
The 16 T Dipole Development Program for FCC
/ Tommasini, Davide (CERN) ; Auchmann, B (CERN) ; Bajas, Hugues (CERN) ; Bajko, Marta (CERN) ; Ballarino, Amalia (CERN) ; Bellomo, Giovanni (INFN, Milan) ; Benedikt, Michael (CERN) ; Izquierdo Bermudez, Susana (CERN) ; Bordini, Bernardo (CERN) ; Bottura, Luca (CERN) et al.
Abstract:
A key challenge for a future circular collider (FCC) with centre-of-mass energy of 100 TeV and a circumference in the range of 100 km is the development of high-field superconducting accelerator magnets, capable of providing a 16 T dipolar field of accelerator quality in a 50 mm aperture. This paper summarizes the strategy and actions being undertaken in the framework of the FCC 16 T Magnet Technology Program and the Work Package 5 of the EuroCirCol..
2017 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4000405
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4000405
|
|
|
7.
|
|
|
8.
|
Status of the Demonstrator Magnets for the EuCARD-2 Future Magnets Project
/ Kirby, G (CERN) ; Rossi, L (CERN) ; Badel, A (Grenoble, INP) ; Bajko, M (CERN) ; Ballarino, A (CERN) ; Bottura, L (CERN) ; Dhalle, M (Twente U., Enschede) ; Durante, M (Saclay) ; Fazilleau, P (Saclay) ; Fleiter, J (CERN) et al.
EuCARD-2 is a project partly supported by FP7 European Commission aiming at exploring accelerator magnet technology for 20-T dipole operating field. The EuCARD-2 collaboration is liaising with similar programs for high-field magnets in the U.S. [...]
2016 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4003307
In : 12th European Conference on Applied Superconductivity, Lyon, France, 06 - 10 Sep 2015, pp.4003307
|
|
|
9.
|
Development of the Superferric Sextupole Corrector Magnet for the LHC Luminosity Upgrade
/ Volpini, G (LASA, Segrate) ; Alessandria, F (LASA, Segrate) ; Bellomo, G (LASA, Segrate) ; Broggi, F (LASA, Segrate) ; Paccalini, A (LASA, Segrate) ; Pedrini, D (LASA, Segrate) ; Leone, A (LASA, Segrate) ; Marinozzi, V (LASA, Segrate) ; Quadrio, M (LASA, Segrate) ; Sorbi, M (LASA, Segrate) et al.
The National Institute for Nuclear Physics (INFN) is developing, within the framework of a collaboration agreement with the European Organization for Nuclear Research (CERN), prototypes of five corrector magnets, from skew quadrupoles to dodecapoles, which will equip the high-luminosity interaction regions of the high-luminosity Large Hadron Collider. These magnets are based on a superferric design, which allows a relatively simple, modular, and easy-to-construct magnet. [...]
2016 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4004804
In : 24th International Conference on Magnet Technology, Seoul, Korea, 18 - 23 Oct 2015, pp.4004804
|
|
|
10.
|
Quench Protection Study of the Eurocircol 16 T cosθ Dipole for the Future Circular Collider (FCC)
/ Marinozzi, Vittorio ; Bellomo, Giovanni (INFN) ; Caiffi, Barbara (INFN) ; Fabbricatore, Pasquale (INFN) ; Farinon, Stefania (INFN) ; Salmi, Tiina-Mari (Tampere University of Technology (FI)) ; Sorbi, Massimo Leone (Università degli Studi e INFN Milano (IT)) ; Stenvall, Antti (Tampere University of Technology) ; Volpini, Giovanni (Università degli Studi e INFN Milano (IT))
After LHC will be turned off, a new, more energetic machine will be needed in order to explore unknown regions of the high-energy physics. For this reason, the project Future Circular Collider (FCC) has started, with the goal of developing a 100 km circumference collider of 50 TeV proton beams. [...]
CERN-ACC-2016-0117.-
Geneva : CERN, 2017
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4702505
Access to fulltext document: PDF;
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4702505
|
|