|
1.
|
Performance Analysis of HD1: A 16 Tesla Nb$_3$Sn Dipole Magnet
/ Mattafirri, S (LBNL, Berkeley) ; Bartlett, S E (LBNL, Berkeley) ; Bish, P A (LBNL, Berkeley) ; Caspi, S (LBNL, Berkeley) ; Dietderich, D R (LBNL, Berkeley) ; Ferracin, P (LBNL, Berkeley) ; Gourlay, S A (LBNL, Berkeley) ; Hannaford, C R (LBNL, Berkeley) ; Hafalia, A R (LBNL, Berkeley) ; Lau, W G (LBNL, Berkeley) et al.
The Superconducting Magnet Group at Lawrence Berkeley National Laboratory (LBNL) has been developing technology for high field accelerator magnets from brittle conductors. HD1 is a single bore block dipole magnet using two, double-layer Nb$_3$Sn flat racetrack coils. [...]
2005 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 15 (2005) 1156-1159
In : Applied Superconductivity Conference: Harnessing the Magic, Jacksonville, FL, USA, 3 - 8 Oct 2004, pp.1156-1159
|
|
|
2.
|
Fabrication and component testing results for a Nb$_3$Sn dipole magnet
/ Dell'Orco, D (LBL, Berkeley) ; Scanlan, R M (LBL, Berkeley) ; Taylor, C E (LBL, Berkeley) ; Lietzke, A (LBL, Berkeley) ; Caspi, S (LBL, Berkeley) ; van Oort, J M (LBL, Berkeley) ; McInturff, A D (LBL, Berkeley)
At present, the maximum field achieved in accelerator R&D; dipoles is slightly over 10 T, with NbTi conductor at 1.8 K. Although Nb$_3$Sn has the potential to achieve much higher fields, none of the previous dipoles constructed from Nb$_3$Sn have broken the 10 T barrier. [...]
LBL-35419; SC-MAG-455.-
1995 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 5 (1995) 1000-1003
In : Applied Superconductivity Conference, Boston, MA, USA, 16 - 21 Oct 1994, pp.1000-1003
|
|
|
3.
|
HD1: design and fabrication of a 16 Tesla Nb$_3$Sn dipole magnet
/ Hafalia, A R (LBNL, Berkeley) ; Bartlett, S E (LBNL, Berkeley) ; Caspi, S (LBNL, Berkeley) ; Chiesa, L (LBNL, Berkeley) ; Dietderich, D R (LBNL, Berkeley) ; Ferracin, P (LBNL, Berkeley) ; Goli, M (LBNL, Berkeley) ; Gourlay, S A (LBNL, Berkeley) ; Hannaford, C R (LBNL, Berkeley) ; Higley, H (LBNL, Berkeley) et al.
The Lawrence Berkeley National Laboratory (LBNL) Superconducting Magnet Group has completed the design, fabrication and test of HD1, a 16 T block-coil dipole magnet. State of the art Nb$_3$Sn conductor was wound in double-layer racetrack coils and supported by an iron yoke and a tensioned aluminum shell. [...]
LBNL-57977.-
2004 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 14 (2004) 283-286
External link: Electronic Version from a server
In : 18th International Conference on Magnet Technology, Morioka, Japan, 20 - 24 Oct 2003, pp.283-286
|
|
|
4.
|
|
|
5.
|
Structure for an LHC 90 mm Nb$_{3}$Sn quadrupole magnet
/ Hafalia, Aurelio R ; Bartlett, S E ; Caspi, S ; Dietderich, D R ; Ferracin, P ; Gourlay, S A ; Hannaford, C R ; Higley, H ; Lau, B ; Lietzke, A F et al.
A full-scale mechanical model of the LHC Nb/sub 3/Sn quadrupole magnet structure has been designed, built and tested. The structure will support a 90 mm bore, lm long magnet prototype as part of the US LHC Accelerator Research Program (LARP). [...]
2005
- Published in : IEEE Trans. Appl. Supercond. 15 (2005) 1444-1447
|
|
|
6.
|
|
|
7.
|
|
|
8.
|
A New Generation Nb$_{3}$Sn Wire, and the Prospects for Its Use in Particle Accelerators
/ Scanlan, R M (LBL, Berkeley) ; Dietderich, D R (LBL, Berkeley) ; Gourlay, S A (LBL, Berkeley)
2004
- Published in : AIP Conf. Proc. 711 (2004) 349-358
In : 2003 International Cryogenic Materials Conference, Anchorage, AK, USA, 22 - 26 Sep 2003, pp.349-358
|
|
|
9.
|
Mechanical design of a second generation LHC IR quadrupole
/ Caspi, S ; Bartlett, S E ; Dietderich, D R ; Ferracin, P ; Gourlay, S A ; Hafalia, R R ; Hannaford, C R ; Lietzke, A F ; McInturff, A D ; Sabbi, G L et al.
2004 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 14 (2004) 235-238
In : 18th International Conference on Magnet Technology, Morioka, Japan, 20 - 24 Oct 2003, pp.235-238
|
|
|
10.
|
Test results from the LQXB quadrupole production program at Fermilab for the LHC interaction regions
/ Bossert, R ; Carson, J ; Chichili, D R ; Fehér, S ; Kerby, J S ; Lamm, M J ; Nobrega, A ; Nicol, T H ; Ogitsu, T ; Orris, D et al.
2004 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 14 (2004) 187-190
In : 18th International Conference on Magnet Technology, Morioka, Japan, 20 - 24 Oct 2003, pp.187-190
|
|