|
1.
|
|
|
2.
|
Radio-frequency design of a new C-band variable power splitter
/ Li, Zong-Bin (SINAP, Shanghai ; Beijing, GUCAS) ; Grudiev, Alexej (CERN) ; Fang, Wen-Cheng (SINAP, Shanghai) ; Gu, Qiang (SINAP, Shanghai) ; Zhao, Zhen-Tang (SINAP, Shanghai)
A novel variable C-band radio-frequency (RF) power splitter was designed at Shanghai Institute of Applied Physics, Chinese Academy of Sciences. Using three RF impedance combiners, an H-bend, and an RF polarizer, this new power splitter is much more compact than a traditionally designed splitter, which comprises three 3-dB hybrids. [...]
2019 - 7 p.
- Published in : Nucl. Sci. Tech. 30 (2019) 100
|
|
|
3.
|
Microstructure and Mechanical Properties of the Enclosure Welding Joint for ITER Correction Coils Cases
/ Xin, Jijun (Hefei, Inst. Plasma Phys.) ; Fang, Chao (Hefei, Inst. Plasma Phys.) ; Yang, Wuxiong (Beijing U. of Tech.) ; Huang, Chuanjun (Beijing, Tech. Inst. Phys. Chem.) ; Dai, Wenhua (Hefei, Inst. Plasma Phys.) ; Wei, Jing (Hefei, Inst. Plasma Phys.) ; Song, Yuntao (Hefei, Inst. Plasma Phys.) ; Li, Laifeng (Beijing, Tech. Inst. Phys. Chem.) ; Fabrice, Simon (Euratom, St. Paul Lez Durance) ; Paul, Libeyre (Euratom, St. Paul Lez Durance) et al.
To resist the alternating electromagnetic loads, the International Thermonuclear Experimental Reactor (ITER) correction coils are protected by a 20-mm-thick 316LN austenitic stainless steel case. According to the strict tolerance requirement of the case manufacture, laser welding was applied to enclosure welding of the cases with a 20-kW high-power laser for root pass and Tungsten Inert Gas welding was applied for filler and cover passes. [...]
2020 - 8 p.
- Published in : IEEE Trans. Appl. Supercond. 30 (2020) 8401208
|
|
|
4.
|
Microstructure and Mechanical Properties of ITER Correction Coil Case Material
/ Xin, Jijun (Hefei, Inst. Plasma Phys.) ; Fang, Chao (Hefei, Inst. Plasma Phys.) ; Song, Yuntao (Hefei, Inst. Plasma Phys.) ; Wei, Jing (Hefei, Inst. Plasma Phys.) ; Huang, Chuanjun (Beijing, Tech. Inst. Phys. Chem.) ; Libeyre, Paul (Euratom, St. Paul Lez Durance) ; Simon, Fabrice (Euratom, St. Paul Lez Durance) ; Sgobba, Stefano (CERN)
The modified 316LN austenitic stainless steel was selected as ITER correction coils case material to provide structural reinforcement to the winding pack. Considering the case structure, high-assembling accuracy and other strict requirements, 316LN in special extruded form has been developed. [...]
2017 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4201707
- Published in : IEEE Trans. Appl. Supercond. 30 (2019) 9700101
|
|
|
5.
|
Requirements for qualification of manufacture of the ITER Central Solenoid and Correction Coils
/ Libeyre, Paul (ITER, St. Paul Lez Durance) ; Li, Hongwei (ITER China, Beijing) ; Reiersen, Wayne (US ITER Project, Oak Ridge) ; Dolgetta, Nello (ITER, St. Paul Lez Durance) ; Jong, Cornelis (ITER, St. Paul Lez Durance) ; Lyraud, Charles (ITER, St. Paul Lez Durance) ; Mitchell, Neil (ITER, St. Paul Lez Durance) ; Laurenti, Adamo (ITER, St. Paul Lez Durance) ; Sgobba, Stefano (CERN) ; Turck, Bernard (ITER, St. Paul Lez Durance) et al.
2015
- Published in : Fusion Eng. Design 98-99 (2015) 1103-1108
In : 28th Symposium on Fusion Technology, San Sebastian, Spain, 29 Sep - 3 Oct 2014, pp.1103–1108
|
|
|
6.
|
The Laser Welding with Hot Wire of 316LN Thick Plate Applied on ITER Correction Coil Case
/ Fang, Chao (ASIPP, Anhui) ; Song, Yuntao (ASIPP, Anhui) ; Wu, Weiyue (ASIPP, Anhui) ; Wei, Jing (ASIPP, Anhui) ; Zhang, Shuquan (ASIPP, Anhui) ; Li, Hongwei (ITER China, Beijing) ; Dolgetta, N (ITER, St. Paul Lez Durance) ; Libeyre, P (ITER, St. Paul Lez Durance) ; Cormany, C (ITER, St. Paul Lez Durance) ; Sgobba, S (CERN)
ITER correction coil (CC) cases have characteristics of small cross section, large dimensions, and complex structure. The cases are made of heavy thick (20 mm), high strength and high toughness austenitic stainless steel 316LN. [...]
2014
- Published in : J. Fusion Energy 33 (2014) 752-758
|
|
|
7.
|
Progress of the ITER Correction Coils in China
/ Wei, J (Hefei, Inst. Plasma Phys.) ; Wu, W (Hefei, Inst. Plasma Phys.) ; Han, S (Hefei, Inst. Plasma Phys.) ; Yu, X (Hefei, Inst. Plasma Phys.) ; Du, S (Hefei, Inst. Plasma Phys.) ; Li, C (Hefei, Inst. Plasma Phys.) ; Fang, C (Hefei, Inst. Plasma Phys.) ; Wang, L (Hefei, Inst. Plasma Phys.) ; Zheng, W (Hefei, Inst. Plasma Phys.) ; Liu, L (Hefei, Inst. Plasma Phys.) et al.
The ITER Correction Coils (CC) include three sets of six coils each, distributed symmetrically around the tokamak to correct error fields. Each pair of coils, located on opposite sides of the tokamak, is series connected with polarity to produce asymmetric fields. [...]
2014 - 5.
- Published in : IEEE Trans. Appl. Supercond. 24 (2014) 4202005
In : 23rd International Conference on Magnet Technology, Boston, MA, USA, 14 - 19 Jul 2013, pp.4202005
|
|
|
8.
|
|
|
JUNO Conceptual Design Report
/ Adam, T ; An, F P ; An, G P ; An, Q ; Anfimov, N ; Antonelli, V ; Baldoncini, M ; Baussan, E ; Bellato, M ; Bezrukov, L et al.
The Jiangmen Underground Neutrino Observatory (JUNO) is proposed to determine the neutrino mass hierarchy using an underground liquid scintillator detector. [...]
arXiv:1508.07166.
-
2015. - 300 p.
Preprint
|
|
|
9.
|
|
|
10.
|
A brief introduction to SMESE mission
/ Wang, C (Beijing, LHP) ; Fang, C (Nanjing U.) ; Gan, W (Purple Mountain Observ.) ; Prado, J Y ; Trottet, G ; Vial, J C ; Yan, Y ; Auchere, F ; Chang, J ; Molodi, G
2006 - 4 p.
In : ILWS Workshop on Solar Influence on the Heliosphere and Earth's Environment, Goa, India, 19 - 24 Feb 2006, pp.211-214
|
|