Nothing Special   »   [go: up one dir, main page]

CERN Accelerating science

主頁 > 檢索結果: Bowden, Gordon
搜索幫助
高級檢索
Add to Search +
搜尋 專輯:
排序 結果顯示 輸出格式:
CERN Document Server 找到 10 筆記錄  檢索需時 0.60 秒. 
1.
Building a 12GHz Traveling Wave Accelerating Structure Brazed Through Irises / Dolgashev, Valery (SLAC) ; Bowden, Gordon (SLAC) ; Dal Forno, Massimo (SLAC) ; Grudiev, Alexej (CERN) ; Haase, Andrew (SLAC) ; Zha, Hao (Tsinghua U., Beijing)
Accelerating structures are usually manufactured by precision turning of individual cells combined with precision milling for complex parts such as rf power couplers. These multiple parts are staked and brazed into a complete structure. [...]
CERN-ACC-2018-195; CLIC-Note-1156.- 2018 - 4 p. - Published in : 10.18429/JACoW-LINAC2018-THPO018 Fulltext: PDF;
In : 29th International Linear Accelerator Conference, Beijing, China, 16 - 21 Sep 2018, pp.THPO018
詳細記錄 - 相似記錄
2.
Fabrication and high-gradient testing of an accelerating structure made from milled halves / Wuensch, Walter (CERN) ; Argyropoulos, Theodoros (CERN ; Valencia U., IFIC) ; Bowden, Gordon (SLAC) ; Catalán Lasheras, Nuria (CERN) ; Dolgashev, Valery (SLAC) ; Esperante Pereira, Daniel (Valencia U., IFIC ; CERN) ; Giansiracusa, Paul (Melbourne U.) ; Giner Navarro, Jorge (CERN ; Valencia U., IFIC) ; Grudiev, Alexej (CERN) ; Haase, Andrew (SLAC) et al.
Accelerating structures made from parts which follow symmetry planes offer many potential advantages over traditional disk-based structures: more options for joining (from bonding to welding), following this more options for material state (heat treated or not) and potentially lower cost since structures can be made from fewer parts. An X-band structure made from milled halves, and with a standard benchmarked CLIC test structure design has been fabricated and high-gradient tested above 95 MV/m..
CERN-ACC-2017-346.- 2017 - 4 p. - Published in : 10.18429/JACoW-LINAC2016-THPLR003 Fulltext: PDF;
In : 28th Linear Accelerator Conference, East Lansing, Michigan, 25 - 30 Sep 2016, pp.THPLR003
詳細記錄 - 相似記錄
3.
Results from the CLIC X-BAND structure test program at the NLCTA / Adolphsen, Chris (SLAC) ; Bowden, Gordon (SLAC) ; Dolgashev, Valery (SLAC) ; Laurent, Lisa (SLAC) ; Tantawi, Sami (SLAC) ; Wang, Faya (SLAC) ; Wang, W Juwen (SLAC) ; Doebert, Steffen (CERN) ; Grudiev, Alexej (CERN) ; Riddone, Germana (CERN) et al.
As part of a SLAC-CERN-KEK col­lab­o­ra­tion on high gra­di­ent X-band struc­ture re­search, sev­er­al pro­to­type struc­tures for the CLIC lin­ear col­lid­er study have been test­ed using two of the high power (300 MW) X-band rf sta­tions in the NLCTA fa­cil­i­ty at SLAC. These struc­tures dif­fer in terms of their man­u­fac­tur­ing (brazed disks and clamped quad­rants), gra­di­ent pro­file (amount by which the gra­di­ent in­creas­es along the struc­ture which op­ti­mizes ef­fi­cien­cy and max­i­mizes sus­tain­able gra­di­ent) and HOM damp­ing (use of slots or waveg­uides to rapid­ly dis­si­pate dipole mode en­er­gy). [...]
CERN-OPEN-2013-033; SLAC-PUB-13697; CLIC-Note-799.- Geneva : CERN, 2010 - 4 p. Preprint: PDF; External link: Published version from PAC09
In : Particle Accelerator Conference 2009, Vancouver, Canada, 04 - 08 May 2009, pp.WE5PFP018
詳細記錄 - 相似記錄
4.
ILC Reference Design Report Volume 3 - Accelerator / Phinney, Nan (ed.) (SLAC) ; Toge, Nobukazu (ed.) (KEK, Tsukuba) ; Walker, Nicholas J. (ed.) (DESY) ; Aarons, Gerald (SLAC) ; Abe, Toshinori (Tokyo U.) ; Abernathy, Jason (Victoria U.) ; Ablikim, Medina (Beijing, Inst. High Energy Phys.) ; Abramowicz, Halina (Tel Aviv U.) ; Adey, David (Birmingham U.) ; Adloff, Catherine (Annecy, LAPP) et al.
The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. [...]
arXiv:0712.2361 ; FERMILAB-PUB-07-833-AD. - 2007 - 339.
Fermilab Library Server - Full text - Fulltext
詳細記錄 - 相似記錄
5.
ILC Reference Design Report Volume 4 - Detectors / ILC Collaboration
This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. [...]
arXiv:0712.2356 ; FERMILAB-DESIGN-2007-02 ; FERMILAB-PUB-07-793-E. - 2007 - 209.
Fermilab Library Server (fulltext available) - Full text - Fulltext
詳細記錄 - 相似記錄
6.
ILC Reference Design Report Volume 1 - Executive Summary / ILC Collaboration
The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. [...]
arXiv:0712.1950 ; FERMILAB-DESIGN-2007-03 ; FERMILAB-PUB-07-794-E. - 2007 - 147.
Fermilab Library Server (fulltext available) - Full text - http://lss.fnal.gov/archive/2007/pub/fermilab-pub-07-794-e.pdf - Full text
詳細記錄 - 相似記錄
7.
International Linear Collider Reference Design Report Volume 2: PHYSICS AT THE ILC / ILC Collaboration
This article reviews the physics case for the ILC. [...]
arXiv:0709.1893 ; SLAC-R-975 ; FERMILAB-DESIGN-2007-04 ; FERMILAB-PUB-07-795-E. - 2007 - 149.
SLAC Document Server - http://lss.fnal.gov/archive/2007/pub/fermilab-pub-07-795-e.pdf - Full text - Fulltext
詳細記錄 - 相似記錄
8.
Studies of Room Temperature Accelerator Structures for the ILC Positron Source / Wang, Juwen W ; Adolphsen, Chris ; Bharadwaj, V K ; Bowden, Gordon B ; Dolgashev, Valery A ; Jones, Roger M ; Jongewaard, Erik N ; Lewandowski, James R ; Li, Zenghai ; Miller, Roger H
There are many challenges in the design of the normal-conducting portion of ILC positron injector system such as achieving adequate cooling with the high rf and particle loss heating, and sustaining high accelerator gradients during millisecond-long pulses in a strong magnetic field. The proposed design for the positron injector contains both standing-wave and traveling-wave L-band accelerator structures for high RF efficiency, low cost and ease of fabrication. [...]
SLAC-PUB-11767.- Stanford, CA : SLAC, 2005 - 3 p. External links: Fulltext from SLAC; Published version from JACoW
In : 21st IEEE Particle Accelerator Conference, Knoxville, TN, USA, 16 - 20 May 2005, pp.2827
詳細記錄 - 相似記錄
9.
High Gradient Performance of NLC/GLC X-Band Accelerating Structures / Döbert, Steffen ; Adolphsen, Chris ; Boffo, Cristian ; Bowden, Gordon B ; Burke, David ; Carter, Harry ; Chan, Jose ; Dolgashev, Valery A ; Frisch, Josef ; Funahashi, Y et al.
During the past five years, there has been an concerted effort at FNAL, KEK and SLAC to develop accelerator structures that meet the high gradient performance requirements for the Next Linear Collider (NLC) and Global Linear Collider (GLC) initiatives. The structure that resulted is a 60-cm-long, traveling-wave design with low group velocity (< 4% c) and a 150 degree phase advance per cell. [...]
SLAC-PUB-11207.- Stanford, CA : SLAC, 2005 - 3 p. External link: Published version from JACoW
In : 21st IEEE Particle Accelerator Conference, Knoxville, TN, USA, 16 - 20 May 2005, pp.372
詳細記錄 - 相似記錄
10.
Stretched Wire Mechanics / Bowden, Gordon
IWAA-2004-038 ; SLAC-PUB-11465. - 2005. - 9 p.
Fulltext from SLAC
詳細記錄 - 相似記錄

參見：相似的作者
7 Bowden, G
42 Bowden, G B
1 Bowden, G J
1 Bowden, G W
1 Bowden, G.
1 Bowden, G.B.
1 Bowden, George
1 Bowden, George W
1 Bowden, Gorden
2 Bowden, Gordon B
您想得到有關這檢索條件的最新結果嗎？
建立您的 電郵警報 或訂閱 RSS feed.
沒有尋找到什麼? 嘗試在以下的服務器查尋：
Bowden, Gordon 在 Amazon
Bowden, Gordon 在 CERN EDMS
Bowden, Gordon 在 CERN Intranet
Bowden, Gordon 在 CiteSeer
Bowden, Gordon 在 Google Books
Bowden, Gordon 在 Google Scholar
Bowden, Gordon 在 Google Web
Bowden, Gordon 在 IEC		Bowden, Gordon 在 IHS
Bowden, Gordon 在 INSPIRE
Bowden, Gordon 在 ISO
Bowden, Gordon 在 KISS Books/Journals
Bowden, Gordon 在 KISS Preprints
Bowden, Gordon 在 NEBIS
Bowden, Gordon 在 SLAC Library Catalog
Bowden, Gordon 在 Scirus