Nothing Special   »   [go: up one dir, main page]

CERN Accelerating science

Hovedsiden > Søkeresultater: Barbero-Soto, E
Søketips
Avansert søk
Add to Search +
Søk samlinger:
Sorter etter: Vis resultater: Visningsformat:
CERN Document Server 11 elementer funnet  1 - 10neste  gå til element: Søket tok 0.53 sekunder. 
1.
CERN-MEDICIS: A Unique Facility for the Production of Non-Conventional Radionuclides for the Medical Research / Duchemin, Charlotte (CERN) ; Barbero-Soto, Esther (CERN) ; Bernardes, Ana (CERN) ; Catherall, Richard (CERN) ; Chevallay, Eric (CERN) ; Cocolios, Thomas (Leuven U.) ; Dorsival, Alexandre (CERN) ; Fedosseev, Valentin (CERN) ; Fernier, Pascal (CERN) ; Gilardoni, Simone (CERN) et al.
The MEDICIS facility is a unique facility located at CERN dedicated to the production of non-conventional radionuclides for research and development in imaging, diagnostics and radiation therapy. It exploits in a Class A work sector, a dedicated isotope separator beam line, a target irradiation station at the 1.4 GeV Proton Synchroton Booster (PSB) and receives activated targets from external institutes during CERN Long Shut-Downs. [...]
CERN-ACC-2021-010.- 2021 - 5 p. - Published in : JACoW IPAC 2020 (2020) THVIR13 Fulltext: PDF;
In : 11th International Particle Accelerator Conference, Caen, France, 10 - 15 May 2020, pp.THVIR13
Detaljert visning - Lignende elementer
2.
The management of a large scale project in particle accelerators: the commissioning of the technical systems in the LHC / Barbero Soto, Esther
CERN-THESIS-2008-172 - 175 p.

Fulltext
Detaljert visning - Lignende elementer
3.
Scheduling the powering tests / Barbero-Soto, E (CERN) ; Bellesia, B (CERN) ; Casas-Lino, M P (CERN) ; Fernandez-Robles, C (CERN) ; Foraz, K (CERN) ; Pojer, M (CERN) ; Saban, R (CERN) ; Schmidt, R (CERN) ; Solfaroli-Camillocci, M (CERN) ; Vergara-Fernandez, A (CERN)
The Large Hadron Collider is now entering in its final phase before receiving beam, and the activities at CERN between 2007 and 2008 have shifted from installation work to the commissioning of the technical systems ("hardware commissioning"). Due to the unprecedented complexity of this machine, all the systems are or will be tested as far as possible before the cool-down starts. [...]
CERN-TS-2008-014.- Geneva : CERN, 2008 - 5 p. Fulltext: PDF; External link: Published version from JACoW
In : 11th European Particle Accelerator Conference, Genoa, Italy, 23 - 27 Jun 2008, pp.WEPP010
Detaljert visning - Lignende elementer
4.
Short Circuit Tests : First Step of LHC Hardware Commissioning Completion / Barbero-Soto, E (CERN) ; Bellesia, B (CERN) ; Bordry, Frederick (CERN) ; Casas Lino, M P (CERN) ; Coelingh, G J (CERN) ; Cumer, G (CERN) ; Dahlerup-Petersen, K (CERN) ; Guillaume, J C (CERN) ; Inigo-Golfin, J (CERN) ; Montabonnet, V (CERN) et al.
For the two counter rotating beams in the Large Hadron Collider (LHC) about 8000 magnets (main dipole and quadrupole magnets, corrector magnets, separation dipoles, matching section quadrupoles etc.) are powered in about 1500 superconducting electrical circuits. The magnets are powered by power converters that have been designed for the LHC with a current between 60 and 13000A. [...]
CERN-TS-2008-003.- Geneva : CERN, 2008 - 5 p. Fulltext: PDF; External link: Published version from JACoW
In : 11th European Particle Accelerator Conference, Genoa, Italy, 23 - 27 Jun 2008, pp.MOPC103
Detaljert visning - Lignende elementer
5.
The Commissioning of the LHC Technical Systems / Saban, R (CERN) ; Alemany-Fernande, R ; Baggiolini, V ; Ballarino, A ; Barbero-Soto, E ; Bellesia, B ; Bordry, Frederick ; Bozzini, D ; Casas-Lino, M-P ; Chareyre, V et al.
The LHC is an accelerator with unprecedented complexity where the energy stored in magnets and the beams exceeds other accelerators by one-to-two orders of magnitude. To ensure a safe and efficient machine start-up without being plagued by technical problems, a phase of "hardware commissioning" was introduced: a thorough commissioning of technical systems without beam. [...]
2007
In : 22nd Particle Accelerator Conference, Albuquerque, NM, USA, 25 - 29 Jun 2007, pp.3801
Detaljert visning - Lignende elementer
6.
Planning and Logistics Issues raised by the Individual System Tests during the Installation of the LHC / Weisz, S ; Barbero-Soto, E ; Foraz, K ; Rodríguez-Mateos, F
The running of individual system tests has to fit within tight constraints of the LHC installation planning and of CERN's accelerator activity in general. For instance, the short circuit tests of the power converters that are performed in-situ restrict the possibility to work in neighbouring areas; much in the same way, the cold tests of the cryogenic distribution line involve safety access restrictions that are not compatible with the transport and installation of cryo-magnets or interconnect activities in the sector considered. [...]
CERN-TS-2006-008.- Geneva : CERN, 2006 - 4 p. Access to fulltext document: PDF; External link: Published version from JACoW
In : 10th European Particle Accelerator Conference, Edinburgh, UK, 26 - 30 Jun 2006, pp.3233
Detaljert visning - Lignende elementer
7.
Schedule evolution during the life-time of the LHC project / Foraz, K ; Barbero-Soto, E ; Gaillard, H ; Hauviller, Claude ; Weisz, S
The Large Hadron Collider Project was approved by the CERN Council in December 1994. The CERN management opted from the beginning of the project for a very aggressive installation planning based on a just-in-time sequencing of all activities. [...]
CERN-TS-2007-001.- Geneva : CERN, 2007 - 4 p. Access to fulltext document: PDF;
In : 22nd Particle Accelerator Conference, Albuquerque, NM, USA, 25 - 29 Jun 2007, pp.1592
Detaljert visning - Lignende elementer
8.
Preparation of Sector Test-Planning / Barbero-Soto, E (CERN) ; Foraz, K (CERN)
2006 Published version: PDF;
In : 3rd LHC Project Workshop, Divonne-les-Bains, France, 23 - 26 Jan 2006, pp.281-283 (AB-2006-014)
Detaljert visning - Lignende elementer
9.
Progress Of Nb/Cu Technology With 1.5 GHz Cavities / Calatroni, S ; Barbero-Soto, E ; Benvenuti, Cristoforo ; Ferreira, L ; Neupert, H
The residual resistance of Nb/Cu cavities increases exponentially at high RF field. [...]
CERN-TS-2004-003-MME. - 2004. - 8 p.
Access to fulltext document - CERN library copies
Detaljert visning - Lignende elementer
10.
Progress Of Nb/Cu Technology With 1.5 GHz Cavities / Calatroni, S ; Barbero-Soto, E ; Benvenuti, Cristoforo ; Ferreira, L ; Neupert, H
The residual resistance of Nb/Cu cavities increases exponentially at high RF field. [...]
CERN-TS-2004-002-MME. - 2003. - 8 p.
Access to fulltext document - CERN library copies
Detaljert visning - Lignende elementer

CERN Document Server : 11 elementer funnet   1 - 10neste  gå til element:
Se også: lignende forfatternavn
1 Barbero-Soto, Esther
Ønsker du å bli varslet om nye resultater fra denne spørringen?
Sett opp ditt eget e-postvarsel eller abonner på RSS.
Fant du ikke det du lette etter? Gjenta søket på andre tjenere:
Barbero-Soto, E i Amazon
Barbero-Soto, E i CERN EDMS
Barbero-Soto, E i CERN Intranet
Barbero-Soto, E i CiteSeer
Barbero-Soto, E i Google Books
Barbero-Soto, E i Google Scholar
Barbero-Soto, E i Google Web
Barbero-Soto, E i IEC		Barbero-Soto, E i IHS
Barbero-Soto, E i INSPIRE
Barbero-Soto, E i ISO
Barbero-Soto, E i KISS Books/Journals
Barbero-Soto, E i KISS Preprints
Barbero-Soto, E i NEBIS
Barbero-Soto, E i SLAC Library Catalog
Barbero-Soto, E i Scirus