Chatter is a self-excited vibration that can occur during machining operations and become a
common limitation to productivity and part quality. For this reason, it has been a topic of …

Biomanufacturing integrates life science and engineering fundamentals to produce
biocompatible products enhancing the quality of life. The state-of-the-art of this rapidly evolving …

Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer
manufacturing to produce a part. This paper presents experimental work carried out to …

Selective laser melting (SLM) is an advanced manufacturing technology based on layer by
layer building to produce solid parts from metallic powder (Kruth et al., CIRP Ann Manuf …

Biodegradable stents (BRS) offer enormous potential but first they must meet five specific
requirements: (i) their manufacturing process must be precise; (ii) degradation should have …

Surface roughness plays an important role in the performance of a finished part. The roughness
is usually measured off-line when the part is already machined, although in recent years …

The aim of this work is to characterize the effect of cooling and lubrication conditions on
micromilling of Ti6Al4V. This work is carried out by way of varying the cooling conditions in feed …

Chatter is a self-excited vibration that can occur during machining operations. This
undesirable phenomenon is one of the most common limitations when it comes to improving …

Biodegradable stents (BRS) offer the potential to improve long-term patency rates by
providing support just long enough for the artery to heal. However, manufacture BRS is rather …

This paper focuses on understanding the influence of laser milling process parameters on the
final geometrical and surface quality of micro-channel features fabricated on AISI H13 steel…