… baby medicine information, through the transform network, the baby medicine data can be
… system, we can effective create the personal medicine data on database, and then, analysis …

… transceiver is also integrated into the same chip to transfer the image data to the transceiver
outside the patient’s body and to receive the control instructions from the transceiver outside …

… try transceiver for wearable and implantable medical sensor applications is reported in this
letter. This high duty cycled, noncoherent transceiver supports scalable data rate … transceiver …

… , it is recommended that implantable transceivers should use the highest possible data rate
that … low data rates (even in the low kHz range) should buffer data, operate at the highest data …

… to design a body medicine data transceiver (BMDT) that … module is used to acquires the
users data, and 4) through a network … This paper issues a baby medicine data transceiver, RF …

… , medical implant devices operate with low data rates, … of medical electronic devices was
presented. The regulatory standards and characteristics of the state-of the art MICS transceivers …

… transceiver specialized for but not limited to medical implantable applications. It operates at
the 402–405-MHz medical … MHz industrial, scientific, and medical band. Being IEEE 802.15.6 …

… This transmitter is a part of a bi-directional transceiver dedicated to the wireless interface
of implantable and wearable medical devices and benefits from a new efficient Frequency-Shift …

… of the PHM-based transceiver, we measured the BER at various data rates, while changing
from 5 to 10 … , then the best data rate that can be achieved with the current PHM transceiver at …

… transceiver for the medical … transceiver of a medical implant, the requirements of data rate
for up- and down-link may not be consistent, according to the general operations of a medical …