A high-strength-ductility 304L stainless steel with heterogeneous lamella structure (HLS)
was fabricated by cold rolling and subsequent partial recrystallization. The HLS was …

Studies show that sharp and blunt notches can be classified in the same research system. In
the present study, the virtual-real caustics experimental method is applied to investigate the …

Abstract The well-known Averaged Strain Energy Density (ASED) criterion, which is
basically a brittle fracture criterion, is employed in conjunction with the Equivalent Material …

The main goal of the present research is to check the suitability of the combined Equivalent
Material Concept-Averaged Strain Energy Density (ASED) failure criterion, called EMC …

In this paper, the effect of aligning graphene oxide nanoplatelets (GONPs) using a direct
current electric field on fracture behaviour of adhesives was studied experimentally and …

The most common mechanical test to evaluate the fracture resistance of a structural metal is
the Charpy-V impact test. Nearly all structural integrity assessment procedures use it. The …

According to the recent literature, the intensity of linear elastic residual stress fields near the
toe region of a welded joint can be quantified by the residual notch stress intensity factors (R …

Different factors such as notch angle, notch depth, notch root radius, specimen size, hammer
geometry and striker velocity affect the value of Charpy impact energy. The aim of present …

In the present study Charpy impact tests on a steel plate of API X65 (made from a pipe with
adiameter of 1219 and a thickness of 14.3 mm) with full size (10× 10× 55 mm) with …

The article discusses the problem related to estimating fatigue life of elements containing
stress concentrators. The algorithm for estimating fatigue life presented in this work uses a …