Background: An accurate fit at the implant-abutment interface is an important factor to avoid
biological and mechanical complications. The aim of this study was to evaluate the marginal …

This study evaluates the fatigue resistance and failure mode of CAD/CAM composite resin
and lithium disilicate–bonded screw-retained incisor crowns with long and short titanium …

Aim: The study assessed deformation of implant components submitted to torsion tests of 80
and 120 N· cm using an optical stereomicroscope. Material and Methods: The following 3 …

Purpose: The objective of the study was to qualitatively assess the micro-gap dimensions,
connecting fitting surface profile, and bacterial leakage of cast high-gold-alloy UCLA …

MATERIALS AND METHODS A total of 30 frameworks were fabricated using three different
techniques: conventional technique (G1), milled in zirconia (G2), and milled in wax and …

Purpose: The objective of the study was to qualitatively assess micro-gap dimensions,
connecting fitting surface profile and bacterial leakage of machined and cast high gold alloy …

Abstract Background and Aim: Microgap in the implant-abutment interface is one of the main
challenges in the treatment of two-piece implants. This study aimed to investigate the effect …

Bu in vitro çalışmanın amacı; dental implant dayanak preparasyonu sırasında oluşan ısının,
dayanak vidasının geri çıkartma torkuna olan etkisinin değerlendirilmesidir. Bunun için iki …

Abstract Background and Aim: Microgap in the implant-abutment interface is one of the main
challenges in the treatment of two-piece implants. This study aimed to investigate the effect …

Abstract Background and Aim: Microgap in the implant-abutment interface is one of the main
challenges in the treatment of two-piece implants. This study aimed to investigate the effect …