The revelation of MoS2 as an efficient electrocatalyst for the hydrogen evolution reaction
(HER) has ratcheted up interest in other transition metal dichalcogenides (TMDs). To date …

Although tantalum (Ta) has been studied experimentally for many years as an important anti-
corrosion material, it remains a challenge to accurately predict its corrosion anisotropy …

In the present paper, the initial stages of anodic film growth on Ti in water-containing
ethylene glycol electrolyte with the addition of fluoride (0.015–0.17 M) were investigated …

For electrochemical etching, it is often assumed intuitively that the high specific surface area
(SSA) is largely dependent on the aggressiveness of the corrosive agent. Today, however …

We investigated the anodic dissolution of polycrystalline titanium rotating disc electrode in
0.1 M hydrofluoric acid in active and passive regions using potentiodynamic polarization …

The electropolishing (EP) mechanism of niobium (Nb) in relatively eco-friendly deep eutectic
solvents (DES) instead of the widely used HF-based electrolyte was studied by anodic …

Anodic dissolution of Ti metal in varying concentrations of hydrofluoric acid (10–1000 mM
HF) was investigated using potentiodynamic polarization and electrochemical impedance …

The influence of the applied passive potential on the ultrasonic cavitation erosion of Ti
specimen in 1 M HCl solution was investigated by mass loss experiment, scanning electron …

The present study deals with the formation and characterization of Cu− benzotriazole (BTA)
nanoparticles, which are relevant to copper surface corrosion and passivation. More …

With anodized titanium in fluoride-containing perchloric acid solution as an example in the
present Article, the physical origin of the faradaic pseudocapacitance C 0 frequently …