[HTML][HTML] Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
The unique combination of very large strains, high temperatures and high strain rates
inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency …
inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency …
Friction stir based welding, processing, extrusion and additive manufacturing
Friction stir welding and processing enabled the creation of stronger joints, novel ultrafine-
grained metals, new metal matrix composites, and multifunctional surfaces at user-defined …
grained metals, new metal matrix composites, and multifunctional surfaces at user-defined …
Recent advances in the kinetics of normal/abnormal grain growth: a review
Recent progress in the kinetics of grain coarsening and abnormal grain growth (AGG) is
presented in this overview article. The factors affecting the kinetics of grain growth is …
presented in this overview article. The factors affecting the kinetics of grain growth is …
Nanoparticles addition in AA2024 aluminum/pure copper plate: FSSW approach, microstructure evolution, texture study, and mechanical properties
B Bagheri, M Alizadeh, SE Mirsalehi, A Shamsipur… - Jom, 2022 - Springer
Due to the high application of dissimilar Al-Cu joints in different industries, pure copper and
the AA2024 alloy with SiC nanoparticles were successfully welded by friction stir spot …
the AA2024 alloy with SiC nanoparticles were successfully welded by friction stir spot …
Friction-based welding processes: friction welding and friction stir welding
Friction-based welding processes are considered as very efficient solid-state metal joining
processes due to soundness of the welded joint with remarkably less energy consumption …
processes due to soundness of the welded joint with remarkably less energy consumption …
Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing
Tensile properties of cold rolled AISI 316L stainless steel after full reversion of martensite to
austenite, recrystallization of retained austenite, and grain growth were studied at 850, 950 …
austenite, recrystallization of retained austenite, and grain growth were studied at 850, 950 …
Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method
Dissimilar friction stir welding of metals is crucial in terms of inter-material mixing and the
intermetallic compound formation which affects the achieving a sound joint with fine …
intermetallic compound formation which affects the achieving a sound joint with fine …
Different attempt to improve friction stir brazing: effect of mechanical vibration and rotational speed
A developed version of friction stir brazing (FSB) entitled friction stir vibration brazing (FSVB)
was presented to fabricate low carbon steel joint using% 67wt Sn-% 33wt Pb alloy as a …
was presented to fabricate low carbon steel joint using% 67wt Sn-% 33wt Pb alloy as a …
Recent advances in EBSD characterization of metals
Í Carneiro, S Simões - Metals, 2020 - mdpi.com
Electron backscatter diffraction (EBSD) has been attracting enormous interest in the
microstructural characterization of metals in recent years. This characterization technique …
microstructural characterization of metals in recent years. This characterization technique …
Failure modes of mechanical clinching in metal sheet materials
L Lei, X He, T Yu, B Xing - Thin-Walled Structures, 2019 - Elsevier
The failure modes of clinched joints in metal sheet materials are comprehensively studied.
The clinched joint failure modes are defined and classified into four types: neck fracture …
The clinched joint failure modes are defined and classified into four types: neck fracture …