Nothing Special   »   [go: up one dir, main page]

Shortcuts

torch.optim

torch.optim is a package implementing various optimization algorithms.

Most commonly used methods are already supported, and the interface is general enough, so that more sophisticated ones can also be easily integrated in the future.

How to use an optimizer

To use torch.optim you have to construct an optimizer object that will hold the current state and will update the parameters based on the computed gradients.

Constructing it

To construct an Optimizer you have to give it an iterable containing the parameters (all should be Variable s) to optimize. Then, you can specify optimizer-specific options such as the learning rate, weight decay, etc.

Example:

optimizer = optim.SGD(model.parameters(), lr=0.01, momentum=0.9)
optimizer = optim.Adam([var1, var2], lr=0.0001)

Per-parameter options

Optimizer s also support specifying per-parameter options. To do this, instead of passing an iterable of Variable s, pass in an iterable of dict s. Each of them will define a separate parameter group, and should contain a params key, containing a list of parameters belonging to it. Other keys should match the keyword arguments accepted by the optimizers, and will be used as optimization options for this group.

For example, this is very useful when one wants to specify per-layer learning rates:

optim.SGD([
                {'params': model.base.parameters(), 'lr': 1e-2},
                {'params': model.classifier.parameters()}
            ], lr=1e-3, momentum=0.9)

This means that model.base’s parameters will use a learning rate of 1e-2, whereas model.classifier’s parameters will stick to the default learning rate of 1e-3. Finally a momentum of 0.9 will be used for all parameters.

Note

You can still pass options as keyword arguments. They will be used as defaults, in the groups that didn’t override them. This is useful when you only want to vary a single option, while keeping all others consistent between parameter groups.

Also consider the following example related to the distinct penalization of parameters. Remember that parameters() returns an iterable that contains all learnable parameters, including biases and other parameters that may prefer distinct penalization. To address this, one can specify individual penalization weights for each parameter group:

bias_params = [p for name, p in self.named_parameters() if 'bias' in name]
others = [p for name, p in self.named_parameters() if 'bias' not in name]

optim.SGD([
                {'params': others},
                {'params': bias_params, 'weight_decay': 0}
            ], weight_decay=1e-2, lr=1e-2)

In this manner, bias terms are isolated from non-bias terms, and a weight_decay of 0 is set specifically for the bias terms, as to avoid any penalization for this group.

Taking an optimization step

All optimizers implement a step() method, that updates the parameters. It can be used in two ways:

optimizer.step()

This is a simplified version supported by most optimizers. The function can be called once the gradients are computed using e.g. backward().

Example:

for input, target in dataset:
    optimizer.zero_grad()
    output = model(input)
    loss = loss_fn(output, target)
    loss.backward()
    optimizer.step()

optimizer.step(closure)

Some optimization algorithms such as Conjugate Gradient and LBFGS need to reevaluate the function multiple times, so you have to pass in a closure that allows them to recompute your model. The closure should clear the gradients, compute the loss, and return it.

Example:

for input, target in dataset:
    def closure():
        optimizer.zero_grad()
        output = model(input)
        loss = loss_fn(output, target)
        loss.backward()
        return loss
    optimizer.step(closure)

Base class

class torch.optim.Optimizer(params, defaults)[source]

Base class for all optimizers.

Warning

Parameters need to be specified as collections that have a deterministic ordering that is consistent between runs. Examples of objects that don’t satisfy those properties are sets and iterators over values of dictionaries.

Parameters
  • params (iterable) – an iterable of torch.Tensor s or dict s. Specifies what Tensors should be optimized.

  • defaults (Dict[str, Any]) – (dict): a dict containing default values of optimization options (used when a parameter group doesn’t specify them).

Optimizer.add_param_group

Add a param group to the Optimizer s param_groups.

Optimizer.load_state_dict

Load the optimizer state.

Optimizer.register_load_state_dict_pre_hook

Register a load_state_dict pre-hook which will be called before load_state_dict() is called. It should have the following signature::.

Optimizer.register_load_state_dict_post_hook

Register a load_state_dict post-hook which will be called after load_state_dict() is called. It should have the following signature::.

Optimizer.state_dict

Return the state of the optimizer as a dict.

Optimizer.register_state_dict_pre_hook

Register a state dict pre-hook which will be called before state_dict() is called.

Optimizer.register_state_dict_post_hook

Register a state dict post-hook which will be called after state_dict() is called.

Optimizer.step

Perform a single optimization step to update parameter.

Optimizer.register_step_pre_hook

Register an optimizer step pre hook which will be called before optimizer step.

Optimizer.register_step_post_hook

Register an optimizer step post hook which will be called after optimizer step.

Optimizer.zero_grad

Reset the gradients of all optimized torch.Tensor s.

Algorithms

Adadelta

Implements Adadelta algorithm.

Adafactor

Implements Adafactor algorithm.

Adagrad

Implements Adagrad algorithm.

Adam

Implements Adam algorithm.

AdamW

Implements AdamW algorithm.

SparseAdam

SparseAdam implements a masked version of the Adam algorithm suitable for sparse gradients.

Adamax

Implements Adamax algorithm (a variant of Adam based on infinity norm).

ASGD

Implements Averaged Stochastic Gradient Descent.

LBFGS

Implements L-BFGS algorithm.

NAdam

Implements NAdam algorithm.

RAdam

Implements RAdam algorithm.

RMSprop

Implements RMSprop algorithm.

Rprop

Implements the resilient backpropagation algorithm.

SGD

Implements stochastic gradient descent (optionally with momentum).

Many of our algorithms have various implementations optimized for performance, readability and/or generality, so we attempt to default to the generally fastest implementation for the current device if no particular implementation has been specified by the user.

We have 3 major categories of implementations: for-loop, foreach (multi-tensor), and fused. The most straightforward implementations are for-loops over the parameters with big chunks of computation. For-looping is usually slower than our foreach implementations, which combine parameters into a multi-tensor and run the big chunks of computation all at once, thereby saving many sequential kernel calls. A few of our optimizers have even faster fused implementations, which fuse the big chunks of computation into one kernel. We can think of foreach implementations as fusing horizontally and fused implementations as fusing vertically on top of that.

In general, the performance ordering of the 3 implementations is fused > foreach > for-loop. So when applicable, we default to foreach over for-loop. Applicable means the foreach implementation is available, the user has not specified any implementation-specific kwargs (e.g., fused, foreach, differentiable), and all tensors are native. Note that while fused should be even faster than foreach, the implementations are newer and we would like to give them more bake-in time before flipping the switch everywhere. We summarize the stability status for each implementation on the second table below, you are welcome to try them out though!

Below is a table showing the available and default implementations of each algorithm:

Algorithm

Default

Has foreach?

Has fused?

Adadelta

foreach

yes

no

Adafactor

for-loop

no

no

Adagrad

foreach

yes

yes (cpu only)

Adam

foreach

yes

yes

AdamW

foreach

yes

yes

SparseAdam

for-loop

no

no

Adamax

foreach

yes

no

ASGD

foreach

yes

no

LBFGS

for-loop

no

no

NAdam

foreach

yes

no

RAdam

foreach

yes

no

RMSprop

foreach

yes

no

Rprop

foreach

yes

no

SGD

foreach

yes

yes

Below table is showing the stability status for fused implementations:

Algorithm

CPU

CUDA

MPS

Adadelta

unsupported

unsupported

unsupported

Adafactor

unsupported

unsupported

unsupported

Adagrad

beta

unsupported

unsupported

Adam

beta

stable

beta

AdamW

beta

stable

beta

SparseAdam

unsupported

unsupported

unsupported

Adamax

unsupported

unsupported

unsupported

ASGD

unsupported

unsupported

unsupported

LBFGS

unsupported

unsupported

unsupported

NAdam

unsupported

unsupported

unsupported

RAdam

unsupported

unsupported

unsupported

RMSprop

unsupported

unsupported

unsupported

Rprop

unsupported

unsupported

unsupported

SGD

beta

beta

beta

How to adjust learning rate

torch.optim.lr_scheduler.LRScheduler provides several methods to adjust the learning rate based on the number of epochs. torch.optim.lr_scheduler.ReduceLROnPlateau allows dynamic learning rate reducing based on some validation measurements.

Learning rate scheduling should be applied after optimizer’s update; e.g., you should write your code this way:

Example:

optimizer = optim.SGD(model.parameters(), lr=0.01, momentum=0.9)
scheduler = ExponentialLR(optimizer, gamma=0.9)

for epoch in range(20):
    for input, target in dataset:
        optimizer.zero_grad()
        output = model(input)
        loss = loss_fn(output, target)
        loss.backward()
        optimizer.step()
    scheduler.step()

Most learning rate schedulers can be called back-to-back (also referred to as chaining schedulers). The result is that each scheduler is applied one after the other on the learning rate obtained by the one preceding it.

Example:

optimizer = optim.SGD(model.parameters(), lr=0.01, momentum=0.9)
scheduler1 = ExponentialLR(optimizer, gamma=0.9)
scheduler2 = MultiStepLR(optimizer, milestones=[30,80], gamma=0.1)

for epoch in range(20):
    for input, target in dataset:
        optimizer.zero_grad()
        output = model(input)
        loss = loss_fn(output, target)
        loss.backward()
        optimizer.step()
    scheduler1.step()
    scheduler2.step()

In many places in the documentation, we will use the following template to refer to schedulers algorithms.

>>> scheduler = ...
>>> for epoch in range(100):
>>>     train(...)
>>>     validate(...)
>>>     scheduler.step()

Warning

Prior to PyTorch 1.1.0, the learning rate scheduler was expected to be called before the optimizer’s update; 1.1.0 changed this behavior in a BC-breaking way. If you use the learning rate scheduler (calling scheduler.step()) before the optimizer’s update (calling optimizer.step()), this will skip the first value of the learning rate schedule. If you are unable to reproduce results after upgrading to PyTorch 1.1.0, please check if you are calling scheduler.step() at the wrong time.

lr_scheduler.LRScheduler

Adjusts the learning rate during optimization.

lr_scheduler.LambdaLR

Sets the initial learning rate.

lr_scheduler.MultiplicativeLR

Multiply the learning rate of each parameter group by the factor given in the specified function.

lr_scheduler.StepLR

Decays the learning rate of each parameter group by gamma every step_size epochs.

lr_scheduler.MultiStepLR

Decays the learning rate of each parameter group by gamma once the number of epoch reaches one of the milestones.

lr_scheduler.ConstantLR

Multiply the learning rate of each parameter group by a small constant factor.

lr_scheduler.LinearLR

Decays the learning rate of each parameter group by linearly changing small multiplicative factor.

lr_scheduler.ExponentialLR

Decays the learning rate of each parameter group by gamma every epoch.

lr_scheduler.PolynomialLR

Decays the learning rate of each parameter group using a polynomial function in the given total_iters.

lr_scheduler.CosineAnnealingLR

Set the learning rate of each parameter group using a cosine annealing schedule.

lr_scheduler.ChainedScheduler

Chains a list of learning rate schedulers.

lr_scheduler.SequentialLR

Contains a list of schedulers expected to be called sequentially during the optimization process.

lr_scheduler.ReduceLROnPlateau

Reduce learning rate when a metric has stopped improving.

lr_scheduler.CyclicLR

Sets the learning rate of each parameter group according to cyclical learning rate policy (CLR).

lr_scheduler.OneCycleLR

Sets the learning rate of each parameter group according to the 1cycle learning rate policy.

lr_scheduler.CosineAnnealingWarmRestarts

Set the learning rate of each parameter group using a cosine annealing schedule.

Weight Averaging (SWA and EMA)

torch.optim.swa_utils.AveragedModel implements Stochastic Weight Averaging (SWA) and Exponential Moving Average (EMA), torch.optim.swa_utils.SWALR implements the SWA learning rate scheduler and torch.optim.swa_utils.update_bn() is a utility function used to update SWA/EMA batch normalization statistics at the end of training.

SWA has been proposed in Averaging Weights Leads to Wider Optima and Better Generalization.

EMA is a widely known technique to reduce the training time by reducing the number of weight updates needed. It is a variation of Polyak averaging, but using exponential weights instead of equal weights across iterations.

Constructing averaged models

The AveragedModel class serves to compute the weights of the SWA or EMA model.

You can create an SWA averaged model by running:

>>> averaged_model = AveragedModel(model)

EMA models are constructed by specifying the multi_avg_fn argument as follows:

>>> decay = 0.999
>>> averaged_model = AveragedModel(model, multi_avg_fn=get_ema_multi_avg_fn(decay))

Decay is a parameter between 0 and 1 that controls how fast the averaged parameters are decayed. If not provided to torch.optim.swa_utils.get_ema_multi_avg_fn(), the default is 0.999.

torch.optim.swa_utils.get_ema_multi_avg_fn() returns a function that applies the following EMA equation to the weights:

Wt+1EMA=αWtEMA+(1α)WtmodelW^\textrm{EMA}_{t+1} = \alpha W^\textrm{EMA}_{t} + (1 - \alpha) W^\textrm{model}_t

where alpha is the EMA decay.

Here the model model can be an arbitrary torch.nn.Module object. averaged_model will keep track of the running averages of the parameters of the model. To update these averages, you should use the update_parameters() function after the optimizer.step():

>>> averaged_model.update_parameters(model)

For SWA and EMA, this call is usually done right after the optimizer step(). In the case of SWA, this is usually skipped for some numbers of steps at the beginning of the training.

Custom averaging strategies

By default, torch.optim.swa_utils.AveragedModel computes a running equal average of the parameters that you provide, but you can also use custom averaging functions with the avg_fn or multi_avg_fn parameters:

  • avg_fn allows defining a function operating on each parameter tuple (averaged parameter, model parameter) and should return the new averaged parameter.

  • multi_avg_fn allows defining more efficient operations acting on a tuple of parameter lists, (averaged parameter list, model parameter list), at the same time, for example using the torch._foreach* functions. This function must update the averaged parameters in-place.

In the following example ema_model computes an exponential moving average using the avg_fn parameter:

>>> ema_avg = lambda averaged_model_parameter, model_parameter, num_averaged:\
>>>         0.9 * averaged_model_parameter + 0.1 * model_parameter
>>> ema_model = torch.optim.swa_utils.AveragedModel(model, avg_fn=ema_avg)

In the following example ema_model computes an exponential moving average using the more efficient multi_avg_fn parameter:

>>> ema_model = AveragedModel(model, multi_avg_fn=get_ema_multi_avg_fn(0.9))

SWA learning rate schedules

Typically, in SWA the learning rate is set to a high constant value. SWALR is a learning rate scheduler that anneals the learning rate to a fixed value, and then keeps it constant. For example, the following code creates a scheduler that linearly anneals the learning rate from its initial value to 0.05 in 5 epochs within each parameter group:

>>> swa_scheduler = torch.optim.swa_utils.SWALR(optimizer, \
>>>         anneal_strategy="linear", anneal_epochs=5, swa_lr=0.05)

You can also use cosine annealing to a fixed value instead of linear annealing by setting anneal_strategy="cos".

Taking care of batch normalization

update_bn() is a utility function that allows to compute the batchnorm statistics for the SWA model on a given dataloader loader at the end of training:

>>> torch.optim.swa_utils.update_bn(loader, swa_model)

update_bn() applies the swa_model to every element in the dataloader and computes the activation statistics for each batch normalization layer in the model.

Warning

update_bn() assumes that each batch in the dataloader loader is either a tensors or a list of tensors where the first element is the tensor that the network swa_model should be applied to. If your dataloader has a different structure, you can update the batch normalization statistics of the swa_model by doing a forward pass with the swa_model on each element of the dataset.

Putting it all together: SWA

In the example below, swa_model is the SWA model that accumulates the averages of the weights. We train the model for a total of 300 epochs and we switch to the SWA learning rate schedule and start to collect SWA averages of the parameters at epoch 160:

>>> loader, optimizer, model, loss_fn = ...
>>> swa_model = torch.optim.swa_utils.AveragedModel(model)
>>> scheduler = torch.optim.lr_scheduler.CosineAnnealingLR(optimizer, T_max=300)
>>> swa_start = 160
>>> swa_scheduler = SWALR(optimizer, swa_lr=0.05)
>>>
>>> for epoch in range(300):
>>>       for input, target in loader:
>>>           optimizer.zero_grad()
>>>           loss_fn(model(input), target).backward()
>>>           optimizer.step()
>>>       if epoch > swa_start:
>>>           swa_model.update_parameters(model)
>>>           swa_scheduler.step()
>>>       else:
>>>           scheduler.step()
>>>
>>> # Update bn statistics for the swa_model at the end
>>> torch.optim.swa_utils.update_bn(loader, swa_model)
>>> # Use swa_model to make predictions on test data
>>> preds = swa_model(test_input)

Putting it all together: EMA

In the example below, ema_model is the EMA model that accumulates the exponentially-decayed averages of the weights with a decay rate of 0.999. We train the model for a total of 300 epochs and start to collect EMA averages immediately.

>>> loader, optimizer, model, loss_fn = ...
>>> ema_model = torch.optim.swa_utils.AveragedModel(model, \
>>>             multi_avg_fn=torch.optim.swa_utils.get_ema_multi_avg_fn(0.999))
>>>
>>> for epoch in range(300):
>>>       for input, target in loader:
>>>           optimizer.zero_grad()
>>>           loss_fn(model(input), target).backward()
>>>           optimizer.step()
>>>           ema_model.update_parameters(model)
>>>
>>> # Update bn statistics for the ema_model at the end
>>> torch.optim.swa_utils.update_bn(loader, ema_model)
>>> # Use ema_model to make predictions on test data
>>> preds = ema_model(test_input)

swa_utils.AveragedModel

Implements averaged model for Stochastic Weight Averaging (SWA) and Exponential Moving Average (EMA).

swa_utils.SWALR

Anneals the learning rate in each parameter group to a fixed value.

torch.optim.swa_utils.get_ema_multi_avg_fn(decay=0.999)[source]

Get the function applying exponential moving average (EMA) across multiple params.

torch.optim.swa_utils.update_bn(loader, model, device=None)[source]

Update BatchNorm running_mean, running_var buffers in the model.

It performs one pass over data in loader to estimate the activation statistics for BatchNorm layers in the model.

Parameters
  • loader (torch.utils.data.DataLoader) – dataset loader to compute the activation statistics on. Each data batch should be either a tensor, or a list/tuple whose first element is a tensor containing data.

  • model (torch.nn.Module) – model for which we seek to update BatchNorm statistics.

  • device (torch.device, optional) – If set, data will be transferred to device before being passed into model.

Example

>>> loader, model = ...
>>> torch.optim.swa_utils.update_bn(loader, model)

Note

The update_bn utility assumes that each data batch in loader is either a tensor or a list or tuple of tensors; in the latter case it is assumed that model.forward() should be called on the first element of the list or tuple corresponding to the data batch.

Docs

Access comprehensive developer documentation for PyTorch

View Docs

Tutorials

Get in-depth tutorials for beginners and advanced developers

View Tutorials

Resources

Find development resources and get your questions answered

View Resources