Nothing Special   »   [go: up one dir, main page]

Nakajima et al., 2010 - Google Patents

A background self-calibrated 6b 2.7 GS/s ADC with cascade-calibrated folding-interpolating architecture

Nakajima et al., 2010

Document ID
18186312684088850999
Author
Nakajima Y
Sakaguchi A
Ohkido T
Kato N
Matsumoto T
Yotsuyanagi M
Publication year
Publication venue
IEEE Journal of Solid-State Circuits

External Links

Snippet

We have developed a 6b 2.7 GS/s folding ADC with on-chip background self-calibration in 90 nm CMOS technology. The ADC achieves high-speed operation of 2.7 GS/s at low power consumption of 50 mW from a 1.0 V power supply and the figure of merit (FOM) is 0.47 …
Continue reading at ieeexplore.ieee.org (other versions)

Classifications

    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0675—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy
    • H03M1/0678—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components
    • H03M1/068—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components the original and additional components or elements being complementary to each other, e.g. CMOS
    • H03M1/0682—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components the original and additional components or elements being complementary to each other, e.g. CMOS using a differential network structure, i.e. symmetrical with respect to ground
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/36—Analogue value compared with reference values simultaneously only, i.e. parallel type
    • H03M1/361—Analogue value compared with reference values simultaneously only, i.e. parallel type having a separate comparator and reference value for each quantisation level, i.e. full flash converter type
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/38—Analogue value compared with reference values sequentially only, e.g. successive approximation type
    • H03M1/44—Sequential comparisons in series-connected stages with change in value of analogue signal
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/1205—Multiplexed conversion systems
    • H03M1/121—Interleaved, i.e. using multiple converters or converter parts for one channel
    • H03M1/1215—Interleaved, i.e. using multiple converters or converter parts for one channel using time-division multiplexing
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0634—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale
    • H03M1/0656—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale in the time domain
    • H03M1/066—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale in the time domain by continuously permuting the elements used, i.e. dynamic element matching
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/14—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit
    • H03M1/16—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit with scale factor modification, i.e. by changing the amplification between the steps
    • H03M1/164—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit with scale factor modification, i.e. by changing the amplification between the steps the steps being performed sequentially in series-connected stages
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/38—Analogue value compared with reference values sequentially only, e.g. successive approximation type
    • H03M1/46—Analogue value compared with reference values sequentially only, e.g. successive approximation type with digital/analogue converter for supplying reference values to converter
    • H03M1/466—Analogue value compared with reference values sequentially only, e.g. successive approximation type with digital/analogue converter for supplying reference values to converter using switched capacitors
    • H03M1/468—Analogue value compared with reference values sequentially only, e.g. successive approximation type with digital/analogue converter for supplying reference values to converter using switched capacitors in which the input S/H circuit is merged with the feedback DAC array
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/38—Analogue value compared with reference values sequentially only, e.g. successive approximation type
    • H03M1/40—Analogue value compared with reference values sequentially only, e.g. successive approximation type recirculation type
    • H03M1/403—Analogue value compared with reference values sequentially only, e.g. successive approximation type recirculation type using switched capacitors
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/66—Digital/analogue converters
    • H03M1/74—Simultaneous conversion
    • H03M1/80—Simultaneous conversion using weighted impedances
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/14—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit
    • H03M1/145—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit the steps being performed sequentially in series-connected stages
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0626—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by filtering
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/66—Digital/analogue converters
    • H03M1/68—Digital/analogue converters with conversions of different sensitivity, i.e. one conversion relating to the more significant digital bits and another conversion to the less significant bits
    • H03M1/682—Digital/analogue converters with conversions of different sensitivity, i.e. one conversion relating to the more significant digital bits and another conversion to the less significant bits both converters being of the unary decoded type
    • H03M1/685—Digital/analogue converters with conversions of different sensitivity, i.e. one conversion relating to the more significant digital bits and another conversion to the less significant bits both converters being of the unary decoded type the quantisation value generators of both converters being arranged in a common two-dimensional array
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/08—Continuously compensating for, or preventing, undesired influence of physical parameters of noise
    • H03M1/0836—Continuously compensating for, or preventing, undesired influence of physical parameters of noise of phase error, e.g. jitter
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0602—Continuously compensating for, or preventing, undesired influence of physical parameters of deviations from the desired transfer characteristic
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/10—Calibration or testing
    • H03M1/1009—Calibration
    • H03M1/1033—Calibration over the full range of the converter, e.g. for correcting differential non-linearity
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/10—Calibration or testing
    • H03M1/1004—Calibration or testing without interrupting normal operation, e.g. by providing an additional component for temporarily replacing components to be tested or calibrated
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/004—Reconfigurable analogue/digital or digital/analogue converters
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M3/00—Conversion of analogue values to or from differential modulation

Similar Documents

Publication Publication Date Title
Nakajima et al. A background self-calibrated 6b 2.7 GS/s ADC with cascade-calibrated folding-interpolating architecture
Nam et al. A 12-bit 1.6, 3.2, and 6.4 GS/s 4-b/cycle time-interleaved SAR ADC with dual reference shifting and interpolation
Lin et al. A 10-bit 2.6-GS/s time-interleaved SAR ADC with a digital-mixing timing-skew calibration technique
Guo et al. A 1.6-GS/s 12.2-mW seven-/eight-way split time-interleaved SAR ADC achieving 54.2-dB SNDR with digital background timing mismatch calibration
Kim et al. A 65 nm CMOS 7b 2 GS/s 20.7 mW flash ADC with cascaded latch interpolation
Kim et al. A 0.6 V 12 b 10 MS/s low-noise asynchronous SAR-assisted time-interleaved SAR (SATI-SAR) ADC
Ginsburg et al. 500-MS/s 5-bit ADC in 65-nm CMOS with split capacitor array DAC
Kim et al. A 10-b, 100-ms/s cmos a/d converter
Yang et al. A time-based energy-efficient analog-to-digital converter
EP2388923B1 (en) Asynchronous digital slope analog-to-digital converter and method thereof
Verbruggen et al. A 2.2 mW 1.75 GS/s 5 bit folding flash ADC in 90 nm digital CMOS
Yu et al. A 1-V 1.25-GS/S 8-bit self-calibrated flash ADC in 90-nm digital CMOS
Tseng et al. A 10-b 320-MS/s stage-gain-error self-calibration pipeline ADC
Shen et al. A 6-bit 800-MS/s pipelined A/D converter with open-loop amplifiers
Nakajima et al. A 7-bit, 1.4 GS/s ADC with offset drift suppression techniques for one-time calibration
Chang et al. A 28-nm 10-b 2.2-GS/s 18.2-mW relative-prime time-interleaved sub-ranging SAR ADC with on-chip background skew calibration
Wang et al. A 43.6-dB SNDR 1-GS/s 3.2-mW SAR ADC with background-calibrated fine and coarse comparators in 28-nm CMOS
Krämer et al. A 14-bit 30-MS/s 38-mW SAR ADC using noise filter gear shifting
Oh et al. A 7-bit two-step flash ADC with sample-and-hold sharing technique
Yuan et al. An interpolation-based calibration architecture for pipeline ADC with nonlinear error
Liu et al. A 10-GS/s 8-bit 2850-μm 2 two-step time-domain ADC with speed and efficiency enhanced by the delay-tracking pipelined-SAR TDC
Li et al. A 7-bit 3.8-GS/s 2-way time-interleaved 4-bit/cycle SAR ADC 16× time-domain interpolation in 28-nm CMOS
Guo et al. A 13b 600-675MS/s Tri-State Pipelined-SAR ADC With Inverter-Based Open-Loop Residue Amplifier
Fang et al. A 2.56-GS/s 12-bit 8x-interleaved ADC with 156.6-dB FoM s in 65-nm CMOS
Li et al. High-resolution and high-speed integrated cmos ad converters for low-power applications