Nothing Special   »   [go: up one dir, main page]

Wang et al., 2017 - Google Patents

Experimental and theoretical investigations of the forming limit of 5754O aluminum alloy sheet under different combined loading paths

Wang et al., 2017

Document ID
13335651174371480426
Author
Wang H
Yan Y
Han F
Wan M
Publication year
Publication venue
International Journal of Mechanical Sciences

External Links

Snippet

The forming limit experiments of 5754O aluminum alloy under combined loading paths are carried out and the forming limit diagrams made up of strains under four combined loading paths are obtained. The effects of the loading path on the forming limit under four combined …
Continue reading at www.sciencedirect.com (other versions)

Classifications

    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/025—Geometry of the test
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/0058—Kind of property studied
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/0202—Control of the test
    • G01N2203/0212—Theories, calculations
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N3/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N3/08—Investigating strength properties of solid materials by application of mechanical stress by applying steady tensile or compressive forces

Similar Documents

Publication Publication Date Title
Wang et al. Experimental and theoretical investigations of the forming limit of 5754O aluminum alloy sheet under different combined loading paths
Roth et al. Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: Experiments and modeling
Eggertsen et al. On constitutive modeling for springback analysis
Dunand et al. Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading–Part I: Plasticity
Choi et al. Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending
Zang et al. Measurement of the Bauschinger behavior of sheet metals by three-point bending springback test with pre-strained strips
Badr et al. Applying a new constitutive model to analyse the springback behaviour of titanium in bending and roll forming
Wagoner et al. Advanced issues in springback
Butuc et al. An experimental and theoretical analysis on the application of stress-based forming limit criterion
Sun et al. Proportional and non-proportional hardening behavior of dual-phase steels
Lee et al. Numerical modeling for accurate prediction of strain localization in hole expansion of a steel sheet
Xue et al. Experimental assessment of nonlinear elastic behaviour of dual-phase steels and application to springback prediction
Mohammed et al. Multiscale crystal plasticity modeling of multiphase advanced high strength steel
Mirfalah-Nasiri et al. Forming limit curves analysis of aluminum alloy considering the through-thickness normal stress, anisotropic yield functions and strain rate
Choi et al. Measurement and modeling of simple shear deformation under load reversal: Application to advanced high strength steels
Marmi et al. Multiaxial fatigue damage modelling at macro scale of Ti–6Al–4V alloy
Hashemi et al. Analysis of the extended stress-based forming limit curve considering the effects of strain path and through-thickness normal stress
Chu et al. Temperature and strain rate influence on AA5086 Forming Limit Curves: Experimental results and discussion on the validity of the MK model
Wang et al. Investigations of fracture on DP980 steel sheet in roll forming process
He et al. Sheet metal forming limits under stretch-bending with anisotropic hardening
Trajkovski et al. Flow and fracture behavior of high-strength armor steel PROTAC 500
Zang et al. Measurements of Bauschinger effect and transient behavior of a quenched and partitioned advanced high strength steel
Yan et al. The inverse parameter identification of Hill 48 yield criterion and its verification in press bending and roll forming process simulations
Torkabadi et al. On the nonlinear anelastic behavior of AHSS
Zhu et al. Influence of flow rule and calibration approach on plasticity characterization of DP780 steel sheets using Hill48 model