Pazhamannil et al., 2023 - Google Patents
Development of a low‐cost volumetric additive manufacturing printer using less viscous commercial resinsPazhamannil et al., 2023
- Document ID
- 12540363536671840008
- Author
- Pazhamannil R
- Hadidi H
- Puthumana G
- Publication year
- Publication venue
- Polymer Engineering & Science
External Links
Snippet
The technological development of the 3D printing industry has been tremendous starting from stereolithography in the 1980 s. Low throughput and surface quality had been the major obstacles to this technology, which offers very limited constraints to the geometrical …
Classifications
-
- B—PERFORMING OPERATIONS; TRANSPORTING
- B29—WORKING OF PLASTICS; WORKING OF SUBSTANCES IN A PLASTIC STATE, IN GENERAL
- B29C—SHAPING OR JOINING OF PLASTICS; SHAPING OF MATERIAL IN A PLASTIC STATE, NOT OTHERWISE PROVIDED FOR; AFTER-TREATMENT OF THE SHAPED PRODUCTS, e.g. REPAIRING
- B29C35/00—Heating, cooling or curing, e.g. crosslinking, vulcanising; Apparatus therefor
- B29C35/02—Heating or curing, e.g. crosslinking, vulcanising during moulding, e.g. in a mould
- B29C35/08—Heating or curing, e.g. crosslinking, vulcanising during moulding, e.g. in a mould by wave energy or particle radiation
- B29C35/0805—Heating or curing, e.g. crosslinking, vulcanising during moulding, e.g. in a mould by wave energy or particle radiation using electromagnetic radiation
Similar Documents
| Publication | Publication Date | Title |
|---|---|---|
| Wang et al. | Stiffness control in dual color tomographic volumetric 3D printing | |
| Pazhamannil et al. | Development of a low‐cost volumetric additive manufacturing printer using less viscous commercial resins | |
| Walker et al. | Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface | |
| Dolinski et al. | Solution mask liquid lithography (SMaLL) for one‐step, multimaterial 3D printing | |
| Park et al. | A visible light-curable yet visible wavelength-transparent resin for stereolithography 3D printing | |
| Brigo et al. | 3D nanofabrication of SiOC ceramic structures | |
| Launay et al. | NIR organic dyes as innovative tools for reprocessing/recycling of plastics: Benefits of the photothermal activation in the near‐infrared range | |
| Oakdale et al. | Post-print UV curing method for improving the mechanical properties of prototypes derived from two-photon lithography | |
| Oakdale et al. | Direct laser writing of low‐density interdigitated foams for plasma drive shaping | |
| Monticeli et al. | A systematic review on high‐performance fiber‐reinforced 3D printed thermoset composites | |
| JP2001121614A (en) | Method for forming three-dimensional object using heat- sensitive composition | |
| Chidambaram et al. | Selective surface smoothening of polymer microlenses by depth confined softening | |
| Bauer et al. | Thermal post-curing as an efficient strategy to eliminate process parameter sensitivity in the mechanical properties of two-photon polymerized materials | |
| Bonardi et al. | Fillers as heaters for photothermal polymerization upon NIR light | |
| Li et al. | Continuous and scalable polymer capsule processing for inertial fusion energy target shell fabrication using droplet microfluidics | |
| Schwartz | Additive manufacturing: Frameworks for chemical understanding and advancement in vat photopolymerization | |
| Maniewski et al. | Laser cladding of transparent fused silica glass using sub-µm powder | |
| Gao et al. | Controllable Frontal Polymerization and Spontaneous Patterning Enabled by Phase‐Changing Particles | |
| Wu et al. | Interfacial Regulation for 3D Printing based on Slice‐Based Photopolymerization | |
| Roumanie et al. | Influence of debinding and sintering conditions on the composition and thermal conductivity of copper parts printed from highly loaded photocurable formulations | |
| Schmitz et al. | Integration of Gold Nanoparticles into NIR‐Radiation Curable Powder Resin | |
| Pemg et al. | Microfluidic chip fabrication using hot embossing and thermal bonding of COP | |
| Kirchner et al. | How post-processing by selective thermal reflow can reduce the roughness of 3D lithography in micro-optical lenses | |
| Wang et al. | Stimuli‐Responsive Liquid Crystal Printheads for Spatial and Temporal Control of Polymerization | |
| Xu et al. | Continuous vat photopolymerization for optical lens fabrication |