Diniz et al., 2008 - Google Patents
A comparison between silicon nitride-based ceramic and coated carbide tools in the face milling of irregular surfacesDiniz et al., 2008
View PDF- Document ID
- 5388859141904971841
- Author
- Diniz A
- Ferrer J
- Publication year
- Publication venue
- Journal of materials processing technology
External Links
Snippet
The goal of this work was to compare a silicon nitride-based ceramic material to a carbide tool in the face milling operation of two irregular surfaces. The main conclusions were (a) ceramic tool life was longer than carbide tool life even taking into account the higher cutting …
- 239000000919 ceramic 0 title abstract description 70
Classifications
-
- C—CHEMISTRY; METALLURGY
- C23—COATING METALLIC MATERIAL; COATING MATERIAL WITH METALLIC MATERIAL; CHEMICAL SURFACE TREATMENT; DIFFUSION TREATMENT OF METALLIC MATERIAL; COATING BY VACUUM EVAPORATION, BY SPUTTERING, BY ION IMPLANTATION OR BY CHEMICAL VAPOUR DEPOSITION, IN GENERAL; INHIBITING CORROSION OF METALLIC MATERIAL OR INCRUSTATION IN GENERAL
- C23C—COATING METALLIC MATERIAL; COATING MATERIAL WITH METALLIC MATERIAL; SURFACE TREATMENT OF METALLIC MATERIAL BY DIFFUSION INTO THE SURFACE, BY CHEMICAL CONVERSION OR SUBSTITUTION; COATING BY VACUUM EVAPORATION, BY SPUTTERING, BY ION IMPLANTATION OR BY CHEMICAL VAPOUR DEPOSITION, IN GENERAL
- C23C30/00—Coating with metallic material characterised only by the composition of the metallic material, i.e. not characterised by the coating process
Similar Documents
| Publication | Publication Date | Title |
|---|---|---|
| De Godoy et al. | Turning of interrupted and continuous hardened steel surfaces using ceramic and CBN cutting tools | |
| Özbek et al. | The effect of vibration and cutting zone temperature on surface roughness and tool wear in eco-friendly MQL turning of AISI D2 | |
| Xiang et al. | Diamond tools wear in drilling of SiCp/Al matrix composites containing Copper | |
| De Oliveira et al. | Hard turning in continuous and interrupted cut with PCBN and whisker-reinforced cutting tools | |
| Cantero et al. | Analysis of tool wear patterns in finishing turning of Inconel 718 | |
| Diniz et al. | Hard turning of interrupted surfaces using CBN tools | |
| Özbek et al. | Effect of cutting conditions on wear performance of cryogenically treated tungsten carbide inserts in dry turning of stainless steel | |
| Avila et al. | The effect of cutting fluids on the machining of hardened AISI 4340 steel | |
| Dhar et al. | Cutting temperature, tool wear, surface roughness and dimensional deviation in turning AISI-4037 steel under cryogenic condition | |
| Chinchanikar et al. | Investigations on machinability aspects of hardened AISI 4340 steel at different levels of hardness using coated carbide tools | |
| Noordin et al. | Dry turning of tempered martensitic stainless tool steel using coated cermet and coated carbide tools | |
| Lima et al. | Hard turning: AISI 4340 high strength low alloy steel and AISI D2 cold work tool steel | |
| Coelho et al. | Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions | |
| Liu et al. | Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions | |
| Aslantas et al. | Tool life and wear mechanism of coated and uncoated Al2O3/TiCN mixed ceramic tools in turning hardened alloy steel | |
| Shalaby et al. | Wear mechanisms of several cutting tool materials in hard turning of high carbon–chromium tool steel | |
| Sahoo et al. | Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts | |
| Haron et al. | Wear of coated and uncoated carbides in turning tool steel | |
| Arumugam et al. | Dry machining of aluminum–silicon alloy using polished CVD diamond-coated cutting tools inserts | |
| Liew | Low-speed milling of stainless steel with TiAlN single-layer and TiAlN/AlCrN nano-multilayer coated carbide tools under different lubrication conditions | |
| Soo et al. | High speed turning of Inconel 718 using PVD-coated PCBN tools | |
| Bhowmick et al. | Tribological behavior of Al–6.5%,–12%,–18.5% Si alloys during machining using CVD diamond and DLC coated tools | |
| Astakhov | Tribology of cutting tools | |
| Sheikh-Ahmad et al. | Tool wear in machining processes for composites | |
| Kumar et al. | Effect of chip sliding velocity and temperature on the wear behaviour of PVD AlCrN and AlTiN coated mixed alumina cutting tools during turning of hardened steel |