Window Privacy Film,Reeded Glass Window Film,Non AdhesiveTranslucent Privacy Film,Removable Sun Blocking Window Coverings Decorative Window Sticker (17.5'' x 78.7'')

PRICES MAY VARY. The Window Film is made of environmental friendly materials without adhesive. static cling window film can be easily removed, re-positioned and reused. Stripe Glass Window Film can not only protect your privacy, but also very effective at controlling excess heat. Retain heat in winter, keep cool in summer, significant saving on your heating bill.You can diy this film as a glass décor by cutting it into any shape. This Glass Window Film allows much natural light to pass through while providing a level of privacy,After removal, there is no residue,The Glass Window Film is a cost-effective and reliable solution. Glass Privacy Window Film can protect your family from harmful UV rays by reducing up to 95% of UV rays, protects skin from harmful UV radiation and helps slow aging of furniture. Please Clean the glass first.then remove the transparent backing film.Use a scraper or hard card to remove bubbles and excess water.Cut off excess privacy vinyl. Brighten Your Home with This Interesting Decorative Window Film Our Window Privacy Film can filter strong sunlight, let soft light enter and reduce glare, so you can say goodbye to annoying glare Privacy protection blurs unwanted views, simple frosted texture adorns your personal space. static electricity sticks to the surface, no glue is required, simple stripping and pasting installation, easy to cut and trim, easy to remove and reapply multiple times. UV protection: block harmful ultraviolet rays and prevent people and furniture from being directly exposed to strong sunlight. Safety & Glass Explosion-proof,The window membrane provides a protective layer for the window glass. It fixes the broken glass together when it explodes, so you can avoid the damage caused by the broken glass. Hilarious 3D privacy window film seamless self-adhesive window glass film installation instructions: Step 1. Keep the flat and smooth glass clean. Step 2. Measure the window and determine its size. Step 3. If you need to cut, use the mark to draw a line on the window film. Make sure there is a 1cm gap between the edge of the protective film and the glass surface. Step 4. Wet windows or glass with water (preferably soapy water). Step 5. Remove the static window film from the backing sheet (most important) Step 6. Use a scraper or hard card to remove bubbles and excess water. Step 7. Cut off excess privacy vinyl. How to peel the transparent back film: First of all - please wet a window film corner and twist it with your fingers for a period of time to loosen the connection between the window film and the transparent backing film. Finally - you can easily separate the transparent backing film from the window film.