CAL-ROYAL AF9800 Rated Exit Device Instruction Manual

CAL-ROYAL AF9800 Rated Exit Device

BEFORE INSTALLING DEVICE, PLEASE CHECK

1. IF DOOR FITTED AND HUNG
2. SIZE OF EXIT DEVICE, FUNCTION AND DESIGN.
   1. 36″ DEVICES CAN BE CUT TO FIT DOORS DOWN TO 30″ WIDE.
   2. 48″ DEVICES CAN BE CUT TO FIT DOORS DOWN TO 36″.
   3. HAND OF DEVICE AGAINST APPLICATION.
      

APPLY HARDWARE

APPLY RAIL ASSEMBLY

1. CHECK THE SIZE OF DEVICE, IF CUTTING LENGTH REQUIRED.
2. DETERMINE CUT OFF LENGTH “X” BY SUBTRACTING 1-3/4″ FROM “Y”. MARK CUT OFF POINT ON MOUNTING RAIL.
3. DEPRESS ARM INTO RAIL OPENING AND SLIDE RAIL ONTO CHASSIS. LEVEL RAIL AND FASTEN CHASSIS AND MOUNTING PLATE.
   

APPLY COVER AND STRIKES

• ATTACH COVER TO CHASSIS WITH (4) #8 TRUSS HEAD MACHINE SCREW
  
• ATTACH END CAP TO MOUNTING PLATE WITH (2) COVER SCREWS.
  
• ATTACH STRIKE TO DOOR STOP WITH (2) STRIKE SCREW AND 1 WASHER
  

PREPARE DOOR

1. FOR 2-1/8″ Ø BORE PREP POSITION TEMPLATE OVER EXISTING HOLE AND MARK FOR TWO CHASSIS MOUNTING SCREW HOLES.
   
2. FOR DOOR W/O BORE PREP, MARK VERTICAL CHASSIS AND HORIZONTAL CHASSIS USING DIMENSIONS BELOW.
   

Documents / Resources

CAL-ROYAL AF9800 Rated Exit Device [pdf] Instruction Manual AF9800 Rated Exit Device, AF9800, Rated Exit Device, Exit Device, Device

References

• User Manual