Nothing Special   »   [go: up one dir, main page]

RE: proposal for eliminating <message>

Sanjiva,

Apologies for not replying sooner to your proposal. Needed some time to
think about it...

I really like it. I am sure you have already thought how this affects
(future) specs like BPEL, etc. but of course this shouldn't be of
(great) concern to this group.

Building on your proposal, something else to consider...

<operation name="ncname">
    <input body="list-of-qnames" [headers="list-of-qnames"]/>
    <output body="list-of-qnames" [headers="list-of-qnames"]/>
<!-- need a story about faults -->
</operation>

In this, instead of having to specify the complexType of the body and go
into the potential problems of two types for the same element, you
specify the QNames of all the elements that are going to appear inside a
SOAP body, as you do with headers.

Another problem you avoid with this approach is ordering. If I was to
define a complexType for the body like this:

<xs:complexType name="foo">
  <xs:sequence>
    <xs:element name="arg1" type="xs:string"/>
    <xs:element name="arg2" type="xs:int"/>
  </xs:sequence>
</xs:complexType>

Then, if you wanted to define an operation where the arguments appeared
in reverse order, you'd have to define a new complexType. However, if
you had something like this:

<xs:element name="arg1" type="xs:string"/>
<xs:element name="arg2" type="xs:int"/>

Then you could define operations like this:

<operation name="foo1">
  <input body="tns:arg1 tns:arg2"/>
</operation>

<operation name="foo2">
  <input body="tns:arg2 tns:arg1"/>
</operation>

What do you think?
--
Savas Parastatidis 
http://savas.parastatidis.name
 

> -----Original Message-----
> From: Sanjiva Weerawarana [mailto:sanjiva@watson.ibm.com]
> Sent: Sunday, July 06, 2003 1:50 PM
> To: www-ws-desc@w3.org
> Subject: proposal for eliminating <message>
> 
> 
> Hello,
> 
> During the Rennes F2F we (very) briefly discussed an approach for
> eliminating <message>. In this note I'd like to expand on this a
> bit as well as modify the initial ideas a little bit. There is also
> an on-going work item within a subgroup to define some additions
> to this stuff to make it possible to fully capture RPC signatures
> as was possible with WSDL 1.2 using <part>s. I believe that that
> will build on this proposal, but some tweaking may be necessary.
> 
> Let me discuss this bottom up. In SOAP, a message contains a
> body and header blocks. The body itself is a collection of elements
> and thanks to PASWA, even attachments are logically container
> within this body. The binding may certainly store it somewhere
> else (e.g., inside the MIME envelope) but logically the only
> payload is the body.
> 
> In WSDL 1.1, the <part>s of a message were intended to represent
> the different things that are being sent. These "things" may
> be RPC parameters, headers, or simply message components (an
> XML document, an image, etc..). We all know the limitations
> and evilness of <message>, so I won't bother illustrating them
> again. One of the cool (yet misunderstood) things about WSDL's
> <part> thing was its ability to support describing things
> that were natively typed using something other than XSD.
> 
> The basic idea for how <message> is to be eliminated is to
> define a single complexType that represents all the stuff
> that goes in the SOAP body. No, the proposal is not SOAP
> specific, but I will use SOAP as a canonical binding to
> consider. I will be happy to help explain this further with
> another binding if such is deemed necessary.
> 
> Why a complexType instead of an element? SOAP allows you
> to send more than one element in <soap:body>. So its not possible
> to define one element as the payload. The complexType, OTOH,
> will be the type of <soap:Body>! That too is slightly weird
> because soap:Body already has a type given to it by the SOAP
> schema. However, our schema wizards have asserted that its
> legit for an element to have two or more different types
> (as long as they're consistent? not sure). In this case the
> basic type of soap:Body is anything so any type we define
> for it is fine. I believe that attributes are not allowed
> however and we'd need to clarify and support that.
> 
> OK so what about the header blocks? In WSDL 1.1 the intent
> was that people would describe those as <part>s as well
> and then bind them to different places. (That's why there
> was a "parts" attribute in soap:body and soap:header.)
> A while ago we made a change whereby SOAP headers could
> only be introduced directly in the binding without ever
> describing them abstractly. I have no problem with additional
> headers being described in the binding only, but I do think
> its necessary to have a mechanism for someone to abstractly
> define a "header" that may be used in multiple bindings.
> Indeed some headers will only appear at runtime and hence
> may never be described in WSDL.
> 
> So, in addition to indicating the complexType of the
> payload, one should have the ability to list zero or
> more header elements. What "header" means to each binding
> is of course up to it.
> 
> Thus, the proposal is to define an operation as follows:
> 
> <operation name="ncname">
>     <input body="qname-of-complexType" [headers="list-of-qnames"]/>
>     <output .. same ../>
> </operation>
> 
> In many scenarios the body type will be a single-use definition; i.e,
> no other operation will use the same complexType. In those cases, its
> rather awkward to have to define a *named* complexType. We can avoid
that
> by allowing the following syntactic variant as well:
> 
> <operation name="ncname">
>     <input [headers="list-of-qnames"]>
>         <xsd:complexType>
>             ...
>         </xsd:complexType>
>     </input>
>     <output .. same ../>
> </operation>
> 
> Basically the anonymous complexType within input etc. is the type of
> the body.
> 
> Now, in many cases, it is likely that the body will indeed consist of
> just one element (e.g., a well-known element like a purchase order).
In
> those scenarios its rather awkward to have to define a type just to
> include that element:
> 
> <operation name="foo">
>     <input [headers="list-of-qnames"]>
>         <xsd:complexType
xmlns:xsd="http://www.w3.org/2000/10/XMLSchema">
>             <xsd:sequence>
>                 <xsd:element ref="x:e1" />
>             </xsd:sequence>
>         </xsd:complexType>
>     </input>
>     <output [headers="list-of-qnames"]>
>         <xsd:complexType
xmlns:xsd="http://www.w3.org/2000/10/XMLSchema">
>             <xsd:sequence>
>                 <xsd:element ref="x:e2" />
>             </xsd:sequence>
>         </xsd:complexType>
>     </output>
> </operation>
> 
> Clearly a shortcut syntax would be very useful for this case:
> 
> <operation name="foo">
>     <input element="x:e1" [headers="list-of-qnames"]/>
>     <output element="x:e2" [headers="list-of-qnames"]/>
> </operation>
> 
> Notes that the @element case is strictly a syntactic shortcut as
> one can always define a type which contains only that element and
> refer to that type using @body. If we accept this approach, @element
> should be written up as a short-cut syntax and not as a different
> way to describe the payload.
> 
> OK, so here's the summary of the proposed replacement syntax:
> 
> <operation name="ncname">
>     <input [(body="qname") | (element="qname")]
>            [headers="list-of-qnames"]>
>         [<xsd:complexType> ... </xsd:complexType>]
>     </input>
>     <output [(body="qname") | (element="qname")]
>             [headers="list-of-qnames"]>
>         [<xsd:complexType> ... </xsd:complexType>]
>     </output>
> </operation>
> 
> Semantics:
>     - exactly one of operation/input/@body or operation/input/@element
>       or operation/input/xsd:complexType must be present. Same applies
>       for output, of course.
>     - if the nested complexType element is present it must not be
named.
>       That type defines all the payload content.
>     - if @element is present then it refers to an element that's the
>       single element which is the payload
>     - if @body is present then it refers to a complexType that's the
>       type which defines all the payload content. In SOAP, that type
>       would be the type of soap:Body.
>     - each of the @headers qnames must refer to a global element
>       declaration.
> 
> The nice thing with this syntax is that it becomes only incremental
> complex as the input becomes more complex (only a single element,
> one-time use content of more than just one element and re-usable
> content definitions). However, as you see by the rules above, the
> syntax itself is rather too clever by half. I suggest we pick a
> syntax that supports two cases:
>     (1) What I believe to be the 80/20 case: a single element in the
>         body
>     (2) A named complexType defining everything in the body
> 
> Basically that means we drop the nested anonymous complexType
> inclusion capability. The syntax would then be:
> 
> <operation name="ncname">
>     <input (element|body)="qname" [headers="list-of-qnames"]/>
>     <output (element|body)="qname" [headers="list-of-qnames"]/>
> </operation>
> 
> If @element is used then only that element will appear in the
> body. If @body is used then that's the type representing all
> of body content, i.e., the type of soap:Body in the case of SOAP.
> 
> One additional syntactic shortcut one can do is to overload the
> two usages into one attribute:
> 
> <operation name="ncname">
>     <input body="qname" [headers="list-of-qnames"]/>
>     <output body="qname" [headers="list-of-qnames"]/>
> </operation>
> 
> Now depending on whether @body refers to a type or an element,
> we get the two previous cases.
> 
> BTW, the really cool thing with any of these syntactic approaches
> is that they are highly amenable to default doc/lit binding. You
> may recall that one of the binding changes that Kevin and I have
> proposed is a defaulting of bindings to SOAP doc/lit style (using
> WSDL 1.1 terminology).
> 
> Sanjiva.

Received on Tuesday, 8 July 2003 16:47:45 UTC